1© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
One world. One KEMET
Benets
• Electromagnetic wave suppression – the electromagnetic
wave enters through the sheet and is suppressed by losing
its magnetic structure
• Resonance suppression – controls the high frequency
current and suppresses unwanted electromagnetic
resonance by creating impedance
• Wide range of frequencies available from MHz band to
GHz band
• Thin,exiblematerialusedinportableequipment
• Virtually no limitation to where it can be used
• Less time required for installation
• Easily cut into any shape
• RoHS compliant and halogen-free
• AEC-Q200 (FF1 and EFF4)
Overview
TheKEMETNoiseSuppressionSheetFlexSuppressor®
is effectively designed for high frequency noise that is
generatedfromtheelectronicdevices.Theexiblesheet
is a polymer base, blended with micron-sized magnetic
powders dispersed throughout the material. These sheets
are effective for electromagnetic wave and resonance
suppression, and can be cut into a variety of shapes and
sizes.
Applications
• Radiation noise suppression for electronic equipment,
especially mobile phone, display, digital still camera,
digital video camera, notebook PC and tablet, car
infortainment
• Quasi-microwave range interference prevention inside
and in-between electronics, desense in FM radio, digital
TV, LTE, GPS, Wi-Fi, Bluetooth and optical transceiver
• Electro static discharge (ESD) countermeasure
• Enhanced wireless power transfer
FlexSuppressor®
Noise Suppression Sheet
Sheet Type Roll Type
2© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Part Number System
EFF4 (01)- 240 X 240 T0800
Series Thickness Standard Dimensions Adhesive Tape Thickness
EFA
EFF*
EFF4
EFG*
EFG2
EFS
EFH*
EFR*
EFX*
EFX6
FF1
FG1
FX5
(003)- = 0.03 mm*
(005)- = 0.05 mm
(007)- = 0.07 mm*
(01)- = 0.1 mm
(02)- = 0.2 mm
(03)- = 0.3 mm
(05)- = 0.5 mm
(10)- = 1.0 mm
(25)- = 0.025 mm
(50)- = 0.05 mm
(75)- = 0.075 mm
(100)- = 0.1 mm
(200)- = 0.2 mm
(300)- = 0.3 mm
80X80=Sheet80mmx80mm
120X120=Sheet120mmx120mm
240X80=Sheet240mmx80mm
240X240=Sheet240mmx240mm
240X20M=Roll240mmx20m
240X30M=Roll240mmx30m
240X50M=Roll240mmx50m
T0800 = 0.03 mm
T1500 = 0.14 mm*
T2200 = 0.05 mm*
T2900 = 0.01 mm
Blank = No adhesive tape
* Not for new design.
3© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Specications - High Permeability Type
Features High Permeability Type
Series FX5 EFX6
Effective Frequency Up to 10 GHz
Operating Temperature (°C) –40 to +105
Thickness (mm) 0.025/0.05/0.075/0.1 0.1/0.2/0.3
Standard Dimensions (mm) 240 X 240
(Roll on request) 240 X 240
Permeability at 3 MHz
150 typical 160 typical
0
20 µ”
µ’
µ”
µ’
40
60
80
100
120
140
160
180
Frequency [MHz]
1 10 100 1,000 10,000
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
0
20
40
60
80
100
120
140
160
180
Permeability µ
0
20 µ”
µ’
µ”
µ’
40
60
80
100
120
140
160
180
Frequency [MHz]
1 10 100 1,000 10,000
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
0
20
40
60
80
100
120
140
160
180
Permeability µ
SpecicGravity13.3 typical 3.8 typical
SurfaceResistivity(Ω/sq.) 1.0 X 106 typical
Approved Standard
UL 94 HB
UL File No. E176124
Environment
RoHS Compliant
Halogen Free
PVC Free
Lead Free
Red Phosphorus Free
ReowTemperature(°C) Up to 260°C, special double-sided adhesive tape required, available upon request
1 Value in 23°C atmosphere.
Above specications are for the Flex Suppressor® only (adhesives, etc., not included.)
4© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Specications - GHz Band High Performance Type
Features GHz Band High Performance Type
Series FG1 EFG2
Effective Frequency 1 to 10 GHz
Operating Temperature (°C) –40 to +105
Thickness (mm) 0.025/0.05/0.075 0.1/0.2/0.3
Standard Dimensions (mm) 240 X 240
(Roll on request) 240 X 240
Permeability at 3 MHz
25 typical 35 typical
0
µ”
µ’
µ”
µ’
Frequency [MHz]
1 10 100 1,000 10,000
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
0
10
20
30
40
50
10
20
30
40
50
Permeability µ
0
µ”
µ’
µ”
µ’
Frequency [MHz]
1 10 100 1,000 10,000
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
0
10
20
30
40
50
10
20
30
40
50
Permeability µ
SpecicGravity13.1 typical 3.9 typical
SurfaceResistivity(Ω/sq.) 1.0 X 106 typical
Approved Standard
UL 94 HB
UL File No. E176124
Environment
RoHS Compliant
Halogen Free
PVC Free
Lead Free
Red Phosphorus Free
ReowTemperature(°C) Up to 260°C, special double-sided adhesive tape required, available upon request
1 Value in 23°C atmosphere.
Above specications are for the Flex Suppressor® only (adhesives, etc., not included.)
5© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Specications - Super High Frequency & UL 94 V-0 Flame Retardant Type
Features Super High Frequency Type UL 94 V-0 Flame Retardant Type
Series EFS EFA
Effective Frequency 1 GHz to 40 GHz Up to 10 GHz
Operating Temperature (°C) –40 to +105
Thickness (mm) 0.1/0.2/0.3/0.5/1.0 0.05/0.1/0.2/0.3
Standard Dimensions (mm) 240 X 240 240 X 240
(Roll on request)
Permeability at 3 MHz
10 typical 60 typical
0
10 µ”
µ’
20
30
40
50
60
70
80
90
100
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
µ”
µ’
Frequency [MHz]
1 10 100 1,000 10,000
0
20
40
60
80
100
120
Permeability µ
SpecicGravity14.5 typical 3.1 typical
SurfaceResistivity(Ω/sq.) 1.0 X 108 typical 1.0 X 106 typical
Approved Standard
UL 94 V-0
UL File No. E176124
Environment
RoHS Compliant
Halogen Free
PVC Free
Lead Free
Red Phosphorus Free
ReowTemperature(°C) Up to 260°C, special double-sided adhesive tape required, available upon request
1 Value in 23°C atmosphere.
Above specications are for the Flex Suppressor® only (adhesives, etc., not included.)
6© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Specications - UL 94 V-0 Flame Retardant Type cont.
Features UL 94 V-0 Flame Retardant Type
Series FF1 EFF4
Effective Frequency Up to 10 GHz
Operating Temperature (°C) –40 to +125 –40 to +125
Thickness (mm) 0.05/0.1/0.2/0.3 0.1/0.2/0.3/0.5
Standard Dimensions (mm) 240 X 240
(Roll on request) 240 X 240
Permeability at 3 MHz
100 typical 140 typical
0
10 µ”
µ’
20
30
40
50
60
70
80
90
100
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
µ”
µ’
Frequency [MHz]
1 10 100 1,000 10,000
0
20
40
60
80
100
120
Permeability µ
0
20 µ”
µ’
40
60
80
100
120
140
160
Frequency [MHz]
1 10 100 1,000 10,000
Permeability µ
SpecicGravity13.1 typical 3.7 typical
SurfaceResistivity(Ω/sq.) 1.0 X 106 typical
Approved Standard
UL 94 V-0
UL File No. E176124
Environment
RoHS Compliant
Halogen Free
PVC Free
Lead Free
Red Phosphorus –
ReowTemperature(°C) Up to 260°C, special double-sided adhesive tape required, available upon request
1 Value in 23°C atmosphere.
Above specications are for the Flex Suppressor® only (adhesives, etc., not included.)
7© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Specications - Not for New Design
Features Standard
Specications
High Magnetic
Permeability
Type
Extra High
Magnetic
Permeability
Type
High Frequency
High
Temperature
Reow
Series EFR EFX EFF EFG EFH
Effective Frequency Up to 10 GHz
Operating Temperature (°C) −40to+105
Thickness (mm) 0.05/0.1/0.2/0.3/0.5/1.0 0.05/0.1/0.2/0.3/0.5 0.07/0.1/0.2/0.3 0.05/0.1/0.2/0.3 0.05/0.1
Standard Dimensions (mm) 240x240
SpecicGravity12.8 typical 3.2 typical 3.6 typical 3.0 typical 3.1 typical
Tensile Strength (Mpa) 3.6 minimum 6.8 minimum 6.9 minimum 3.5 minimum 6.8 minimum
SurfaceResistivity(Ω/sq.) 1.0x107 typical 1.0x106 typical 1.0x106 typical 1.0x106 typical 1.0x107 typical
Thermal Conductivity (W/m K) 0.22 0.22 0.4 0.22 1.3
Approved Standard
UL 94 V-0 UL 94 HB UL 94 V-0 UL 94 V-1 UL 94 V-0
UL File No. E176124
Environment
RoHS Compliant
Halogen Free
PVC Free
Lead Free
Red
Phosphorus –Free – – Free
Relative Magnetic Permeability
(at 3MHz) 60 typical 100 typical 130 typical 20 typical 60 typical
Remarks
60 µ high permeability,
variousthicknessame
retardant (UL 94 V-0
certied)
100 µ high permeability,
various thickness
Industry’s highest
magnetic permeability
of 130 µ with halogen
free composition. Flame
retardant (UL 94 V-0
certied)
Excellentsuppression
of high frequency noise
in Wi-Fi and higher
bandwidths.
Can be mounted before
reowing
1 Value in 23°C atmosphere.
Above specications are for the Flex Suppressor® only (adhesives, etc., not included.)
8© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1A – Ratings & Part Number Reference
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Surface
Resistivity Weight
mm mm at 3 MHz Typical Ω/sq. typical g
FX5
0.025
0.01
150
3.3
1.0 X 10
6
1.22
FX5
0.025
0.01
150
3.3
1.0 X 10
6
2.74
FX5
0.025
0.01
150
3.3
1.0 X 10
6
3.66
FX5
0.025
0.01
150
3.3
1.0 X 10
6
10.97
FX5
0.025
--
150
3.3
1.0 X 10
6
990.00
FX5
0.025
0.01
150
3.3
1.0 X 10
6
2,285.40
FX5
0.05
0.01
150
3.3
1.0 X 10
6
1.75
FX5
0.05
0.01
150
3.3
1.0 X 10
6
3.93
FX5
0.05
0.01
150
3.3
1.0 X 10
6
5.24
FX5
0.05
0.01
150
3.3
1.0 X 10
6
15.73
FX5
0.05
--
150
3.3
1.0 X 10
6
1,980.00
FX5
0.05
0.01
150
3.3
1.0 X 10
6
3,275.40
FX5
0.075
0.01
150
3.3
1.0 X 10
6
2.28
FX5
0.075
0.01
150
3.3
1.0 X 10
6
5.12
FX5
0.075
0.01
150
3.3
1.0 X 10
6
6.83
FX5
0.075
0.01
150
3.3
1.0 X 10
6
20.48
FX5
0.075
--
150
3.3
1.0 X 10
6
2,970.00
FX5
0.075
0.01
150
3.3
1.0 X 10
6
4,265.40
FX5
0.1
0.01
150
3.3
1.0 X 10
6
2.81
FX5
0.1
0.01
150
3.3
1.0 X 10
6
6.32
FX5
0.1
0.01
150
3.3
1.0 X 10
6
8.42
FX5
0.1
0.01
150
3.3
1.0 X 10
6
25.26
FX5
0.1
--
150
3.3
1.0 X 10
6
3,960.00
FX5
0.1
0.01
150
3.3
1.0 X 10
6
5,255.40
EFX6
0.1
0.03
160
3.8
1.0 X 10
6
2.53
EFX6
0.1
0.03
160
3.8
1.0 X 10
6
5.69
EFX6
0.1
0.03
160
3.8
1.0 X 10
6
7.59
EFX6
0.1
0.03
160
3.8
1.0 X 10
6
22.77
EFX6
0.2
0.03
160
3.8
1.0 X 10
6
4.96
EFX6
0.2
0.03
160
3.8
1.0 X 10
6
11.17
EFX6
0.2
0.03
160
3.8
1.0 X 10
6
14.89
EFX6
0.2
--
160
3.8
1.0 X 10
6
43.78
EFX6
0.2
0.03
160
3.8
1.0 X 10
6
44.66
EFX6
0.3
0.03
160
3.8
1.0 X 10
6
7.39
EFX6
0.3
0.03
160
3.8
1.0 X 10
6
16.64
EFX6
0.3
0.03
160
3.8
1.0 X 10
6
22.18
EFX6
0.3
--
160
3.8
1.0 X 10
6
65.67
EFX6
0.3
0.03
160
3.8
1.0 X 10
6
66.54
mm mm at 3 MHz Typical Ω/sq. typical g
Part Number Series Thickness Tape Thickness Permeability Specic Gravity Surface
Resistivity Weight
9© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1A – Ratings & Part Number Reference cont.
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Surface
Resistivity Weight
mm mm at 3 MHz Typical Ω/sq. typical g
FG1(25)-80X80T2900 FG1 0.025 0.01 25 3.1 1.0 X 1061.19
FG1
0.025
0.01
25
3.1
1.0 X 10
6
2.67
FG1(25)-240X80T2900 FG1 0.025 0.01 25 3.1 1.0 X 1063.56
FG1
0.025
0.01
25
3.1
1.0 X 10
6
10.69
FG1(25)-240X50M FG1 0.025 -- 25 3.1 1.0 X 106930.00
FG1
0.025
0.01
25
3.1
1.0 X 10
6
2,225.40
FG1(50)-80X80T2900 FG1 0.05 0.01 25 3.1 1.0 X 1061.68
FG1
0.05
0.01
25
3.1
1.0 X 10
6
3.79
FG1(50)-240X80T2900 FG1 0.05 0.01 25 3.1 1.0 X 1065.05
FG1
0.05
0.01
25
3.1
1.0 X 10
6
15.15
FG1(50)-240X50M FG1 0.05 -- 25 3.1 1.0 X 1061,860.00
FG1
0.05
0.01
25
3.1
1.0 X 10
6
3,155.40
FG1(75)-80X80T2900 FG1 0.075 0.01 25 3.1 1.0 X 1062.18
FG1
0.075
0.01
25
3.1
1.0 X 10
6
4.90
FG1(75)-240X80T2900 FG1 0.075 0.01 25 3.1 1.0 X 1066.54
FG1
0.075
0.01
25
3.1
1.0 X 10
6
19.61
FG1(75)-240X50M FG1 0.075 -- 25 3.1 1.0 X 1062,790.00
FG1
0.075
0.01
25
3.1
1.0 X 10
6
4,085.40
EFG2(01)-80X80T0800 EFG2 0.1 0.03 35 3.9 1.0 X 1062.59
EFG2
0.1
0.03
35
3.9
1.0 X 10
6
5.82
EFG2(01)-240X80T0800 EFG2 0.1 0.03 35 3.9 1.0 X 1067.76
EFG2
0.1
0.03
35
3.9
1.0 X 10
6
23.27
EFG2(02)-80X80T0800 EFG2 0.2 0.03 35 3.9 1.0 X 1065.08
EFG2
0.2
0.03
35
3.9
1.0 X 10
6
11.44
EFG2(02)-240X80T0800 EFG2 0.2 0.03 35 3.9 1.0 X 10615.25
EFG2
0.2
--
35
3.9
1.0 X 10
6
44.93
EFG2(02)-240X240T0800 EFG2 0.2 0.03 35 3.9 1.0 X 10645.74
EFG2
0.3
0.03
35
3.9
1.0 X 10
6
7.58
EFG2(03)-120X120T0800 EFG2 0.3 0.03 35 3.9 1.0 X 10617.05
EFG2
0.3
0.03
35
3.9
1.0 X 10
6
22.73
EFG2(03)-240X240 EFG2 0.3 -- 35 3.9 1.0 X 10667.40
EFG2
0.3
0.03
35
3.9
1.0 X 10
6
68.20
EFA(005)-80X80T0800 EFA 0.05 0.03 60 3.1 1.0 X 1061.26
EFA
0.05
0.03
60
3.1
1.0 X 10
6
2.83
EFA(005)-240X80T0800 EFA 0.05 0.03 60 3.1 1.0 X 1063.77
EFA
0.05
0.03
60
3.1
1.0 X 10
6
9.81
EFA(005)-240X50M EFA 0.05 -- 60 3.1 1.0 X 1061,860.00
EFA
0.05
0.03
60
3.1
1.0 X 10
6
2,042.40
mm mm at 3 MHz Typical Ω/sq. typical g
Part Number Series Thickness Tape Thickness Permeability Specic Gravity Surface
Resistivity Weight
10© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1A – Ratings & Part Number Reference cont.
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Surface
Resistivity Weight
mm mm at 3 MHz Typical Ω/sq. typical g
EFA
0.1
0.03
60
3.1
1.0 X 10
6
2.24
EFA
0.1
0.03
60
3.1
1.0 X 10
6
5.05
EFA
0.1
0.03
60
3.1
1.0 X 10
6
6.73
EFA
0.1
0.03
60
3.1
1.0 X 10
6
18.74
EFA
0.1
--
60
3.1
1.0 X 10
6
3,720.00
EFA
0.1
0.03
60
3.1
1.0 X 10
6
3,902.40
EFA
0.2
0.03
60
3.1
1.0 X 10
6
4.23
EFA
0.2
0.03
60
3.1
1.0 X 10
6
9.53
EFA
0.2
0.03
60
3.1
1.0 X 10
6
12.70
EFA
0.2
--
60
3.1
1.0 X 10
6
35.72
EFA
0.2
0.03
60
3.1
1.0 X 10
6
36.59
EFA
0.2
--
60
3.1
1.0 X 10
6
4,464.00
EFA
0.2
0.03
60
3.1
1.0 X 10
6
4,573.44
EFA
0.3
0.03
60
3.1
1.0 X 10
6
6.21
EFA
0.3
0.03
60
3.1
1.0 X 10
6
13.98
EFA
0.3
0.03
60
3.1
1.0 X 10
6
18.63
EFA
0.3
--
60
3.1
1.0 X 10
6
53.57
EFA
0.3
0.03
60
3.1
1.0 X 10
6
54.45
EFA
0.3
--
60
3.1
1.0 X 10
6
4,464.00
EFA
0.3
0.03
60
3.1
1.0 X 10
6
4,536.96
FF1
0.05
0.03
100
3.1
1.0 X 10
6
1.09
FF1
0.05
0.03
100
3.1
1.0 X 10
6
2.45
FF1
0.05
0.03
100
3.1
1.0 X 10
6
3.27
FF1
0.05
0.03
100
3.1
1.0 X 10
6
9.81
FF1
0.05
--
100
3.1
1.0 X 10
6
1,860.00
FF1
0.05
0.03
100
3.1
1.0 X 10
6
2,042.40
FF1
0.1
0.03
100
3.1
1.0 X 10
6
2.08
FF1
0.1
0.03
100
3.1
1.0 X 10
6
4.69
FF1
0.1
0.03
100
3.1
1.0 X 10
6
6.25
FF1
0.1
0.03
100
3.1
1.0 X 10
6
18.74
FF1
0.1
--
100
3.1
1.0 X 10
6
3,720.00
FF1
0.1
0.03
100
3.1
1.0 X 10
6
3,902.40
FF1
0.2
0.03
100
3.1
1.0 X 10
6
4.07
FF1
0.2
0.03
100
3.1
1.0 X 10
6
9.15
FF1
0.2
0.03
100
3.1
1.0 X 10
6
12.20
FF1
0.2
--
100
3.1
1.0 X 10
6
35.72
FF1
0.2
0.03
100
3.1
1.0 X 10
6
36.59
FF1
0.2
--
100
3.1
1.0 X 10
6
4,464.00
mm mm at 3 MHz Typical Ω/sq. typical g
Part Number Series Thickness Tape Thickness Permeability Specic Gravity Surface
Resistivity Weight
11© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1A – Ratings & Part Number Reference cont.
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Surface
Resistivity Weight
mm mm at 3 MHz Typical Ω/sq. typical g
FF1
0.2
0.03
100
3.1
1.0 X 10
6
4,573.44
FF1
0.3
0.03
100
3.1
1.0 X 10
6
6.05
FF1
0.3
0.03
100
3.1
1.0 X 10
6
13.61
FF1
0.3
0.03
100
3.1
1.0 X 10
6
18.15
FF1
0.3
--
100
3.1
1.0 X 10
6
53.57
FF1
0.3
0.03
100
3.1
1.0 X 10
6
54.45
FF1
0.3
--
100
3.1
1.0 X 10
6
4,464.00
FF1
0.3
0.03
100
3.1
1.0 X 10
6
4,536.96
EFF4
0.1
0.03
140
3.7
1.0 X 10
6
2.63
EFF4
0.1
0.03
140
3.7
1.0 X 10
6
5.92
EFF4
0.1
0.03
140
3.7
1.0 X 10
6
7.89
EFF4
0.1
0.03
140
3.7
1.0 X 10
6
23.66
EFF4
0.2
0.03
140
3.7
1.0 X 10
6
5.00
EFF4
0.2
0.03
140
3.7
1.0 X 10
6
11.24
EFF4
0.2
0.03
140
3.7
1.0 X 10
6
14.99
EFF4
0.2
--
140
3.7
1.0 X 10
6
42.63
EFF4
0.2
0.03
140
3.7
1.0 X 10
6
44.97
EFF4
0.3
0.03
140
3.7
1.0 X 10
6
7.36
EFF4
0.3
0.03
140
3.7
1.0 X 10
6
16.57
EFF4
0.3
0.03
140
3.7
1.0 X 10
6
22.09
EFF4
0.3
--
140
3.7
1.0 X 10
6
63.94
EFF4
0.3
0.03
140
3.7
1.0 X 10
6
66.28
EFF4
0.5
0.03
140
3.7
1.0 X 10
6
12.10
EFF4
0.5
0.03
140
3.7
1.0 X 10
6
27.23
EFF4
0.5
0.03
140
3.7
1.0 X 10
6
36.30
EFF4
0.5
--
140
3.7
1.0 X 10
6
106.56
EFF4
0.5
0.03
140
3.7
1.0 X 10
6
108.90
EFS
0.1
0.03
10
4.5
1.0 X 10
8
3.80
EFS
0.1
0.03
10
4.5
1.0 X 10
8
8.50
EFS
0.1
0.03
10
4.5
1.0 X 10
8
11.30
EFS
0.1
0.03
10
4.5
1.0 X 10
8
34.00
EFS
0.2
0.03
10
4.5
1.0 X 10
8
6.60
EFS
0.2
0.03
10
4.5
1.0 X 10
8
14.80
EFS
0.2
0.03
10
4.5
1.0 X 10
8
19.70
EFS
0.2
--
10
4.5
1.0 X 10
8
50.10
EFS
0.2
0.03
10
4.5
1.0 X 10
8
59.10
EFS
0.3
0.03
10
4.5
1.0 X 10
8
9.30
EFS
0.3
0.03
10
4.5
1.0 X 10
8
21.00
mm mm at 3 MHz Typical Ω/sq. typical g
Part Number Series Thickness Tape Thickness Permeability Specic Gravity Surface
Resistivity Weight
12© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1A – Ratings & Part Number Reference cont.
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Surface
Resistivity Weight
mm mm at 3 MHz Typical Ω/sq. typical g
EFS
0.3
0.03
10
4.5
1.0 X 10
8
28.00
EFS
0.3
--
10
4.5
1.0 X 10
8
75.10
EFS
0.3
0.03
10
4.5
1.0 X 10
8
84.10
EFS
0.5
0.03
10
4.5
1.0 X 10
8
14.90
EFS
0.5
0.03
10
4.5
1.0 X 108
33.50
EFS
0.5
0.03
10
4.5
1.0 X 10
8
44.70
EFS
0.5
--
10
4.5
1.0 X 10
8
125.10
EFS
0.5
0.03
10
4.5
1.0 X 10
8
134.20
EFS
1.0
0.03
10
4.5
1.0 X 10
8
28.80
EFS
1.0
0.03
10
4.5
1.0 X 10
8
64.80
EFS
1.0
0.03
10
4.5
1.0 X 10
8
86.40
EFS
1.0
--
10
4.5
1.0 X 10
8
250.30
EFS
1.0
0.03
10
4.5
1.0 X 10
8
259.30
mm mm at 3 MHz Typical Ω/sq. typical g
Part Number Series Thickness Tape Thickness Permeability Specic Gravity Surface
Resistivity Weight
13© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Table 1B – Not for New Design Ratings & Part Number Reference
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Tensile
Strength
Surface
Resistivity
Thermal
Conductivity
mm mm at 3 MHz Typical Mpa Minimum Ω/sq. typical W/mK
EFR(005)-240x240T0800 EFR 0.05 0.03 60 2.8 3.6 1.0 X 1070.22
EFR(01)-240x240T0800 EFR 0.1 0.03 60 2.8 3.6 1.0 X 1070.22
EFR(02)-240x240 EFR 0.2 -- 60 2.8 3.6 1.0 X 1070.22
EFR(02)-240x240T0800 EFR 0.2 0.03 60 2.8 3.6 1.0 X 1070.22
EFR(03)-240x240 EFR 0.3 -- 60 2.8 3.6 1.0 X 1070.22
EFR(03)-240x240T0800 EFR 0.3 0.03 60 2.8 3.6 1.0 X 1070.22
EFR(05)-240x240 EFR 0.5 -- 60 2.8 3.6 1.0 X 1070.22
EFR(05)-240x240T1500 EFR 0.5 0.14 60 2.8 3.6 1.0 X 1070.22
EFR(10)-240x240 EFR 1-- 60 2.8 3.6 1.0 X 1070.22
EFR(10)-240x240T1500 EFR 10.14 60 2.8 3.6 1.0 X 1070.22
EFX(005)-240x240T0800 EFX 0.05 0.03 100 3.2 6.8 1.0 X 1060.22
EFX(01)-240x240T0800 EFX 0.1 0.03 100 3.2 6.8 1.0 X 1060.22
EFX(02)-240x240 EFX 0.2 -- 100 3.2 6.8 1.0 X 1060.22
EFX(02)-240x240T0800 EFX 0.2 0.03 100 3.2 6.8 1.0 X 1060.22
EFX(03)-240x240 EFX 0.3 -- 100 3.2 6.8 1.0 X 1060.22
EFX(03)-240x240T0800 EFX 0.3 0.03 100 3.2 6.8 1.0 X 1060.22
EFX(05)-240x240 EFX 0.5 -- 100 3.2 6.8 1.0 X 1060.22
EFX(05)-240x240T1500 EFX 0.5 0.14 100 3.2 6.8 1.0 X 1060.22
EFF(007)-240x240T0800 EFF 0.07 0.03 130 3.6 6.9 1.0 X 1060.4
EFF(01)-240x240T0800 EFF 0.1 0.03 130 3.6 6.9 1.0 X 1060.4
EFF(02)-240x240 EFF 0.2 -- 130 3.6 6.9 1.0 X 1060.4
EFF(02)-240x240T0800 EFF 0.2 0.03 130 3.6 6.9 1.0 X 1060.4
EFF(03)-240x240 EFF 0.3 -- 130 3.6 6.9 1.0 X 1060.4
EFF(03)-240x240T0800 EFF 0.3 0.03 130 3.6 6.9 1.0 X 1060.4
EFA(003)-240x240T0800 EFA 0.03 0.03 60 3.1 6.8 1.0 X 1071.3
EFG(005)-240x240T0800 EFG 0.05 0.03 20 33.5 1.0 X 1060.22
EFG(01)-240x240T0800 EFG 0.1 0.03 20 33.5 1.0 X 1060.22
EFG(02)-240x240 EFG 0.2 -- 20 33.5 1.0 X 1060.22
EFG(02)-240x240T0800 EFG 0.2 0.03 20 33.5 1.0 X 1060.22
EFG(03)-240x240 EFG 0.3 -- 20 33.5 1.0 X 1060.22
EFG(03)-240x240T0800 EFG 0.3 0.03 20 33.5 1.0 X 1060.22
EFH(005)-240x240T2200 EFH 0.05 0.05 60 3.1 6.8 1.0 X 1071.3
EFH(01)-240x240T2200 EFH 0.1 0.05 60 3.1 6.8 1.0 X 1071.3
mm mm at 3 MHz Typical Mpa Minimum Ω/sq. typical W/mK
Part Number Series Thickness Tape
Thickness Permeability Specic
Gravity
Tensile
Strength
Surface
Resistivity
Thermal
Conductivity
14© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Shielding
Shielding materials
(metal, electrically conductive material)
While transmitted waves can be minimized, most of the incoming waves are
reected,causinginternalinterference.
High frequency electric current occurs on the metal surfaces and the
reectednoiseoccursattheshieldingjoints,metalopenings,andotherparts
when the grounding is poor.
Shielding material with radio wave absorber
Shieldingmaterialwithradiowaveabsorber,transmittedwavesandreected
waves can be minimized by mounting metal plates on the back of the radio
wave absorbers.
Radio wave absorbers
Topreventreection,theelectromagneticenergyisabsorbedandconverted
into heat.
Reference: other absorbing and reecting examples
Absorbing Reecting
Radio Waves Radio waves absorbers Metals
Light Blackobjects Whiteobjects,mirrors
Sound Absorbers, felt Solid bodies (concrete, etc.)
Reflected
waves
Reflected
waves
Incoming waves
Metal
surface
High-frequency
electric current
Shield
Shield
Radio wave
absorber
Incoming
waves Heat
conversion
Heat
conversion
Reflected
waves
Reflected
waves
Transmitted
waves
Transmitted
waves
Incoming waves
Heat
conversion
Radio wave absorber
15© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Applications
Case 1–Suppressingnoisereectedbycasing
Case 2 – Suppressing crosstalk between substrates
Apply directly to casing
(Case 1)
Apply between boards (Case 2)
Case 3 – Suppressing radiation noise from LSI and IC
Apply directly to
top of LSI or IC
(Case 3)
Apply directly to
circuit board line
(Case 3)
Insulation process should be performed when
there is contact to conductive material
Case 4 – Suppressing noise from cables
Wrap Flex Suppressor® around the cable.
Caution: Must be covered with heat-shrink
material (Case 4) Apply directly to a flat cable.(Case 4)
Case 5–Suppressingnoiseradiation(reectednoise)from
the opening of the shield, the casing, etc.
Attached around opening
(Case 5)
Opening
Suppressing radiation
Shielded casing
High-frequency current on shielded surface
16© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Applications (cont’d)
Devices Noise Radiation
Suppression
Internal
Interference
Suppression
RFID Transmission
Quality
Improvement
Anti-ESD
Measure
Anti-SAR
Measure
Mobile phone On main CPU
On FPC and LSI for LCD
module and camera
module
On main CPU for
reception improvement
On loop antenna for
distance communication
improvement
On FPC and LSI for
LCD module and
camera module
On metal parts such as
chassis
Near antenna and
on chassis
Digital still camera
and digital video
camera
On CCD module FPD
On image processing LSI
On a memory slot
On the board
On loop antenna for
distance communication
improvement
On the board and FPC
On metal parts such as
chassis
—
Notebook PC
and tablet
On CPU and GPU
On cables inside LCD
panel
On memory and SSD
On wireless LAN and LTE
module
On loop antenna and metal
parts near antenna for
distance communication
improvement
On CPU and GPU
On metal parts such as
chassis
Near antenna and
on chassis
Car infotainment On LCD and FPC
Oncontrolbox
On GPS receiver and TV
tuner
On LSI for LCD for radio
reception improvement
—On metal parts such as
chassis —
Neareld
communication tag
(NFC tag)
— —
On loop antenna and metal
parts near antenna for
distance communication
improvement
— —
Base station, optical
transceiver module —
On the interior of the
chassis and on LSI for
error rate improvement
— — —
Wireless LAN
and Wi-Fi. —
Oncableandco-axial
cable for reception
improvement
— — —
Mobile phone Tablet
Notebook PC
Digital still camera
Car navigation system
Noise radiation suppression
Internal interference suppression Internal interference suppression Wireless power transfer
Internal
interference
suppression
Internal
interference
suppression
Internal
interference
suppression
Anti-ESD
measure
Anti-ESD
measure
Anti-ESD
measure
Noise radiation suppression
Internal interference
suppression
Anti-ESD
measure
Anti-ESD
measure
Anti-ESD
measure
Anti-ESD
measure
Anti-SAR
measure
RFID transmission
quality improvement
Noise radiation
suppression
Noise radiation
suppression
Noise radiation
suppression Wearable watch
17© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Examples of Shapes
KEMETFlexSuppressor®sheetscanbecutintoavarietyofshapesandsizes:
With holes, cut-out shapes, and circular shapes Precut
Reel Roll With Aluminum or PET sheet
Someexamplesofcustomization,availableuponrequest:
• TheuseofPETlminthefront,forinsulationormechanicalsupport
• The use of aluminum sheet in the front, for shielding effect
• The use of different adhesive tapes on the back - stronger, thinner, thicker, etc.
Customization Examples
Where
Function
PET Film Front Insulation or mechanical support
Aluminum sheet Front Shielding effect
Different adhesive tape Back
Stronger adhesive tape
Thinner or thicker tape
Reowcapable,double-sidedtape
18© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Permeable Characteristics
200
180
160
EFX6 µ’
FF1 µ’
EFA µ’
FX5 µ”
EFX6 µ”
EFF4 µ”
EFA µ”
FF1 µ”
FX5 µ’
EFF4 µ’
140
120
100
80
60
40
20
0
1 10 100
Frequency [MHz]
Permeability µ
1,000 10,000
Above data are not guaranteed values.
EFA, FF1, EFF4, FX5 & EFX6
19© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Permeable Characteristics cont.
50
0
10
20
30
40
EFG2 µ’
FG1 µ’
EFG2 µ”
FG1 µ”
1 10 100
Frequency [MHz]
Permeability µ
1,000 10,000
Above data are not guaranteed values.
FG1 & EFG2
20© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Permeable Characteristics cont.
0
5
10
15
1 10 1001,00010,000
Permeability µ
Frequency [MHz]
EFS μ'
EFS μ”
Above data are not guaranteed values.
EFS
21© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Permeable Characteristics - Not for New Design
Above data are not guaranteed values.
140
0
40
20
80
60
120
EFF µ’
EFX µ’
EFH µ’
EFR µ’
EFF µ’
EFR µ” EFG µ”
EFG µ’
EFX µ”
EFH µ”
100
1 10 100
Frequency [MHz]
Permeability µ
1,000 10,000
EFF, EFG, EFR & EFX
22© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Measuring Method of Electrical Characteristics
Attenuation
of transmission noise
Loop AntennaLoop Antenna
Attenuation
of coupling noise
Electrical Characteristics
FX5 – Attenuation of Transmission Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
FX5 – Attenuation of Coupling Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
EFX6 – Attenuation of Transmission Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
EFX6 – Attenuation of Coupling Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
Above data are not guaranteed values.
23© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Electrical Characteristics cont.
EFA – Attenuation of Transmission Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
EFA – Attenuation of Coupling Noise
Copper
EFX6 (01)
EFX6 (02) EFX6 (03)
Copper
Copper
Copper
Copper
Copper
FX5 (25) FX5 (50) FX5 (75) FX5 (100)
Transmission [dB]
−60
0
FX5 Type
EFX6 Type EFX6 Type
EFA Type EFA Type
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
FX5 Type
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900
1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFA (005) EFA (01) EFA (02) EFA (03)
FX5 (25)
FX5 (50) FX5 (75) FX5 (100)
EFX6 (01) EFX6 (02)
EFX6 (03)
EFA (005) EFA (01)
EFA (02) EFA (03)
FF1 – Attenuation of Transmission Noise
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Copper
FF1 (50) FF1 (200) FF1 (300)FF1 (100)
Copper
FF1 (50)
FF1 (200) FF1 (300)
FF1 (100)
Copper
EFF4 (05)
EFF4 (02)
EFF4 (03)
EFF4 (01)
Copper
EFF4 (05)EFF4 (02) EFF4 (03)
EFF4 (01)
FF1 Type FF1 Type
EFF4 TypeEFF4 Type
Above data are not guaranteed values.
FF1 – Attenuation of Coupling Noise
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Copper
FF1 (50) FF1 (200) FF1 (300)FF1 (100)
Copper
FF1 (50)
FF1 (200) FF1 (300)
FF1 (100)
Copper
EFF4 (05)
EFF4 (02)
EFF4 (03)
EFF4 (01)
Copper
EFF4 (05)EFF4 (02) EFF4 (03)
EFF4 (01)
FF1 Type FF1 Type
EFF4 TypeEFF4 Type
Above data are not guaranteed values.
EFF4 – Attenuation of Transmission Noise
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Copper
FF1 (50) FF1 (200) FF1 (300)FF1 (100) Copper
FF1 (50)
FF1 (200) FF1 (300)
FF1 (100)
Copper
EFF4 (05)
EFF4 (02)
EFF4 (03)
EFF4 (01)
Copper
EFF4 (05)EFF4 (02) EFF4 (03)
EFF4 (01)
FF1 Type FF1 Type
EFF4 TypeEFF4 Type
Above data are not guaranteed values.
EFF4 – Attenuation of Coupling Noise
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Copper
FF1 (50) FF1 (200) FF1 (300)FF1 (100) Copper
FF1 (50)
FF1 (200) FF1 (300)
FF1 (100)
Copper
EFF4 (05)
EFF4 (02)
EFF4 (03)
EFF4 (01)
Copper
EFF4 (05)EFF4 (02) EFF4 (03)
EFF4 (01)
FF1 Type FF1 Type
EFF4 TypeEFF4 Type
Above data are not guaranteed values.
Above data are not guaranteed values.
24© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Electrical Characteristics - Not for New Design
EFR – Attenuation of Transmission Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFX – Attenuation of Transmission Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFR – Attenuation of Coupling Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFX – Attenuation of Coupling Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
25© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Electrical Characteristics - Not for New Design cont.
EFF – Attenuation of Transmission Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFH – Attenuation of Transmission Noise
TYPE / EFA
TYPE / EFH
Copper
Copper
Copper
Copper
EFA (02)
EFA (02)
EFA (03)
EFA (03)
EFA (01)
EFH (01)
EFH (005)
EFH (01)
EFH (005)
EFA (01)
EFA (005)
EFA (005)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFF – Attenuation of Coupling Noise
TYPE / EFF
TYPE / EFR
EFF (03)
EFF (02)
EFF (01)
EFF (03)
EFF (02)
EFF (01)
Copper
Copper
TYPE / EFX
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFX (05)
Copper
Copper
Copper
Copper
EFR (10)
EFR (05)
EFR (03)
EFR (01)EFR (005)
EFR (02)
EFR (03) EFR (05)
EFR (10)
EFR (005)
EFR (01)
EFR (02)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
EFH – Attenuation of Coupling Noise
TYPE / EFA
TYPE / EFH
Copper
Copper
Copper
Copper
EFA (02)
EFA (02)
EFA (03)
EFA (03)
EFA (01)
EFH (01)
EFH (005)
EFH (01)
EFH (005)
EFA (01)
EFA (005)
EFA (005)
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Transmission [dB]
−60
0
−10
−20
−30
−40
−50
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Coupling [dB]
−15
15
10
5
0
−5
−10
100 200 300 400 500 600
Frequency [MHz]
700 800 900 1,000
Above data are not guaranteed values.
26© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Attenuation of Decoupling Noise with Metal
Metal
FLEX SUPPRESSOR®
Loop Antenna
0
3
6
9
12
15
1 10
Attenuation (dB)
Frequency [GHz]
EFS(02)
EFS(03)
EFS(01)
EFS(05)
EFS(10)
Above data are not guaranteed values.
EFS
Measuring Method of Transmission Noise Attenuation Characteristics
Printed board (FR-4)
100 mm x 100 mm x 1.6 mm
Sample
50 mm x 50 mm
Higher loss is
preferable
Maximum 1.0
Micro strip line
Network analyzer
Port 1 Port 2
Z0 = 50 Ω
Incident
Reflection S11 Loss
Loss
Frequency [GHz]
P (loss) / P (in)
42
0.0
0.2
0.4
0.6
0.8
1.0
6
Incident
wave
Incident
wave Reflection
S11 Transmission
S21
Transmission S21
27© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Transmission Noise Attenuation Characteristics
Shown in the graphs below are values of transmission loss calculated from the transmission characteristics S11 and S21,
measured on Z0=50Ωtypemicrostripline(MSL)withaFlexSuppressor® attached.
FX5 (25)
EFA (03)
EFA (02)
EFA (01)
FF1 (200)
FF1 (300)
FF1 (100)
EFF4 (01)
EFF4(02)
EFFA (03)
EFF4 (05)
FF1 (50)
EFA (005)
EFG2 (01)
EFG2 (03)
EFG2 (02)
FG1 (50)
FG1 (50)
FG1 (50)
FX5 (50)
FX5 (75)
FX5 (100)
EFX6 (01)
EFX6 (02)
EFX6 (03)
101
Frequency [GHz]
FX5 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
EFX6 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
EFA Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
FF1 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
FG1 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
EFG2 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
101
Frequency [GHz]
EFF4 Type
Ploss/Pin
0.1
0.0
0.1
0.2
0.3
0.4
0.5
0.6
0.7
0.8
0.9
1.0
Above data are not guaranteed values.
28© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Transmission Noise Attenuation Characteristics - Not for New Design
Shown in the graphs below are values of transmission loss calculated from the transmission characteristics S11 and S21
measured on Z0=50ΩtypeMSL(microstripline)withaFlexSuppressor® attached.
EFR Type EFX Type EFF Type
EFG Type EFH Type
EFR (01)
EFR (10)
EFR (005)
EFR (02)
EFR (03)
EFR (05)
EFX (05)
EFX (005)
EFX (01)
EFX (02)
EFX (03)
EFF (03)
EFF (01)
EFF (02)
EFG (02)
EFG (03)
EFG (01) EFH (01)
EFH (005)
EFG (005)
4 6 8 1020
Frequency [GHz]
Ploss/Pin
0.0
0.2
0.4
0.6
0.8
1.0
4 6 8 1020
Frequency [GHz]
Ploss/Pin
0.0
0.2
0.4
0.6
0.8
1.0
4 6 8 1020
Frequency [GHz]
Ploss/Pin
0.0
0.2
0.4
0.6
0.8
1.0
4 6 8 1020
Frequency [GHz]
Ploss/Pin
0.0
0.2
0.4
0.6
0.8
1.0
4 6 8 1020
Frequency [GHz]
Ploss/Pin
0.0
0.2
0.4
0.6
0.8
1.0
Above data are not guaranteed values.
29© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Soldering Process
230
200
150
Preheating A
B
Peak Temperature (°C)
Time (seconds)
Reflow Profile
Peak Temperature +260°C
Preheating 150–180°C90secondsmaximum
A200°Cormore,60secondsmaximum
B230°Cormore,40secondsmaximum
Number of Times 2timesmaximum
Allnoisesuppressionsheetsarereowcapable,ifusedwithspecialdouble-sidedadhesivetape.
Available upon request. Please contact KEMET respresentative for more details.
Handling Precautions
Avoid high temperature, humidity and direct sunlight. Storage environment should be below 40ºC and below 70% relative
humidity.
The surface resistance value listed in this catalog is a reference value of the circuit parameter to indicate noise
suppression. The value does not represent the product’s insulation characteristics. The value may become lower if an
excesspressureisappliedtotheproduct.
The products in this datasheet are not insulators, they need to be handled as conductors. Care must be taken when in use,
sothatconductivematerialdoesnotcontactthesurfaceortheedgeoftheFlexSuppressor®sheet.Insulationprocess
should be performed when contact to conductive material is probable.
Depending on the processing procedure, powdery substance may drop out from sheet surface or the edge, if the cutting
of the sheet is performed. Depending on the location, care must be taken, as this powder may effect the component’s
performance.
Any dust, oil or moisture must be cleaned from the surface of the installation area when using an adhesive tape to attach
the sheet.
Theadhesivetapemaybegintolosesomeofitsadhesivenessafterbeinginstorageforsixmonths.Thishasnoimpacton
theEMIlteringeffectiveness.
30© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
Export Control
For customers in Japan
Forproductsthatarecontrolleditemssubjecttothe“ForeignExchangeandForeignTradeLaw”ofJapan,theexportlicense
speciedbythelawisrequiredforexport.
For customers outside Japan
FlexSuppressor®productsshouldnotbeusedorsoldfortheuseinthedevelopment,production,stockpilingorutilization
of any conventional weapons, mass-destruction weapons (nuclear, chemical, biological weapons or missiles) or any other
weapons.
Information on environmentally inuential substances
TheFlexSuppressor®doesnotcontainanyofthesubstanceslistedbelow:
(1) Ozone depleting substance
• CFC(chlorouorocarbon)
• Halon
• Carbon tetrachloride
• 1,1,1-Trichloroethane
•HCFC(hydrochlorouorocarbon)
•HBFC(hydrobromuorcarbon)
• Methyl bromide
(2) Substances regulated by RoHS Directive
• Lead and lead compound
• Mercury and mercury compound
• Cadmium and cadmium compound (content of plastics that are below 5 ppm)
•Hexavalentchromiumandhexavalentchromiumcompound
• PBB (polybrominated biphenyl) and its kind
• PBDE (polybrominated diphenylether)
(3) Other environmentally inuential substances (examples)
• PCB (polychlorinated biphenyl)
• Polychlorinated naphthalene
•Hexachlorobenzene
• Organotin compounds (tributyl tin, triphenyl tin)
• Asbestos
• Azo compound
•Chlorinatedparananditskind(paranchloride,chlorinatedparanandchloroparan)
• Radioactive substance
• PVC
31© KEMET Electronics Corporation • KEMET Tower • One East Broward Boulevard FS8004_NSS • 10/9/2018
Fort Lauderdale, FL 33301 USA • 954-766-2800 • www.kemet.com
Flex Suppressor®
Noise Suppression Sheet
KEMET Electronics Corporation Sales Offi ces
Foracompletelistofourglobalsalesoces,pleasevisitwww.kemet.com/sales.
Disclaimer
Allproductspecications,statements,informationanddata(collectively,the“Information”)inthisdatasheetaresubjecttochange.Thecustomerisresponsiblefor
checkingandverifyingtheextenttowhichtheInformationcontainedinthispublicationisapplicabletoanorderatthetimetheorderisplaced.AllInformationgiven
hereinisbelievedtobeaccurateandreliable,butitispresentedwithoutguarantee,warranty,orresponsibilityofanykind,expressedorimplied.
StatementsofsuitabilityforcertainapplicationsarebasedonKEMETElectronicsCorporation’s(“KEMET”)knowledgeoftypicaloperatingconditionsforsuch
applications,butarenotintendedtoconstitute–andKEMETspecicallydisclaims–anywarrantyconcerningsuitabilityforaspeciccustomerapplicationoruse.
TheInformationisintendedforuseonlybycustomerswhohavetherequisiteexperienceandcapabilitytodeterminethecorrectproductsfortheirapplication.Any
technical advice inferred from this Information or otherwise provided by KEMET with reference to the use of KEMET’s products is given gratis, and KEMET assumes
no obligation or liability for the advice given or results obtained.
Although KEMET designs and manufactures its products to the most stringent quality and safety standards, given the current state of the art, isolated component
failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards
(suchasinstallationofprotectivecircuitryorredundancies)inordertoensurethatthefailureofanelectricalcomponentdoesnotresultinariskofpersonalinjury
or property damage.
Although all product–related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicted or that other
measures may not be required.
KEMET is a registered trademark of KEMET Electronics Corporation.