ficheSLRVA24/05/0014:12Page2 SLR Strong points: * High shock resistance (metallic shells). * High vibration resistance (one thread lock, low slope). * High salt spray and chemical agents resistance (specific corrosion resistant shells plating). * IP 67, when mated due to receptacle and panel gaskets as well as one piece backshell with cable clamp and sealing gland backshell. * Metallic protective caps for plug and receptacle with seal. * Working temperature: -55C/+125C. DESCRIPTION MAIN CHARACTERISTICS Reinforced version of the SLX * 5 positionning keys for Plug / Receptacle. SLR series connectors are derived from the standard SLX and have the particulary to be well adapted to applications in harsh environments (Shocks, Vibrations, Humidity) like shelters, off shore or buiding sites activities Coding by user allows a diminution of the number of references to manage. * Coding by the user: 12 coding possibilities (from A to M) by insert rotation. (without any specific tool). * Crimp removable gold plated machined contacts * Closed entry female contacts. * 3 arrangements: 55 size 16 contacts, 37 size 12 contacts, 37 size 16 contacts. For other arrangement, please consult us. SLR : Harsh environment just make it stronger ! General characteristics: Cable clamp tensile strength Acceptable cables diameter: Humidity Working temperature Durability Proof voltage Insert resistance Contact resistance 21 days - 43C to humidity 98% -55C/+125C 100 mating cycles 3000 V 100 M 2 m E105/A Note: Reference document NFF 61-030 UL 1977 approved NORME NFEN 60 529 NFEN 50 102 NFC 93 400 - Test 7b NFC 93 400 - Test 6b NFC 93 400 - Test 17c NFC NFC NFC NFC NFC NFC 93 400 - Test 11c 93 400 - Test 11d 93 400 - Test 9a 93 400 - Test 4a 93400 - Test 3a 93400 - Test 2a-2b * Shelters * Power * Check-Control * Building sites * Off shore SLR Fall test Vibrations VALUE IP67 connected IK06 / 1.5 kg mass dropped from a 40 cm height Fall Height: 1 meter 10 to 60 Hz, amplitude 0.075 mm 60 to 100 Hz, no cut 1s speed 25.4 mm/sec 100 to 600 Hz, acceleration 5G 40 kg in axis 20 to 35 mm APPLICATIONS CHARACTERISTIC Watertightness Physical shock TECHNICAL CHARACTERISTICS ficheSLRVA24/05/0014:12Page3 Available arrangements: Pin connector front face view, A coding. 1 2 6 5 7 1 3 8 4 9 11 10 13 15 16 17 27 31 32 28 23 37 38 29 33 22 29 25 23 30 29 32 35 16 17 22 16 23 26 28 9 10 18 22 25 31 3 4 15 10 20 24 1 9 14 12 19 4 5 33 37 34 44 50 45 34 37 51 55 35 537S 37 size 16 contacts 537D 37 size 12 contacts 555 55 size 16 contacts Dimensions of the connectors: * Receptacle: Possibility to mount the receptacle at the front or the rear of the panel by inverting the panel gasket. 38,7 30,7 72,6 Twice 55,4 Twice T16 or T12 Pin contact 12.4 to 13.5 o 90 3 1 4 o 60 J * Positionning of socket contact 9 16 22 29 31 25 32 38 45 51 37 44 50 53 T12 contact: 12.6 to 13.6 T16 contact: 13.1 to 14.1 H o 73 SOCAPEX SLR K EM 555 o 66,6 10 17 23 12,5 4 places o 5,5 20,5 137 APPROXIMATE o 5,2 174 MAXI 52 o 80 T12 Socket contact: 20.5 to 21.5 T16 Socket contact: 20 to 21 O 20 to 35 cables * Plug: 3 1 9 4 16 29 17 23 25 OCAPEX SLR K FFD 555 37 32 44 38 50 45 55 o 73 10 22 31 51 * Positionning of pin contact o 56 T16 or T12 contact 20.7 to 21.8 o 48 273 APPROXIMATE Dimensions of connectors with protective caps: 49 H SOCAPEX SLR K EM 555 OCAPEX SLR K FFD 555 J 41 185 MAXI Contacts: 2 contact types: size 16 and size 12 Contact size Nominal current Contact resistance Contact retention in the insert Part-number for one pin contact* Part-number for one socket contact* 16 13 A 2 m 40 N 800660 800664 12 25 A 2 m 45 N 21713 21728 * Minimum order quantity: 100 contacts Permissible wire: Contact Size 12 16 Crimp Barrel Inside Diameter Depth (mm) (mm) 2.5 7.5 1.95 6.4 Pin Contact (mm) 3 1.6 Wire Gauge (AWG) 1412 2014 Section mm2 mini maxi 1.8 3.3 0.6* 1.91 Diameter over conductor (mm) mini maxi 1.7 2.45 1 1.9 Maxi Diameter Over Sleeving (mm) 4.2 2.8 TECHNICAL CHARACTERISTICS ficheSLRVA24/05/0014:12Page4 * The use of a 800629 reducing sleeve is necessary for cable section less than 0.60 mm2 for size 16 contacts Acceptable cable diameter: 20 to 35 mm. Cabling tools: - Crimping pliers 809857 (M22520/1-01) - Controlling jauge 809907 (M22520/3-1) - Locator 21770 (TH 397 Daniels) Contacts Size Size Size Size 12: 12: 16: 16: Pin Socket Pin Socket Insertion Tool Screwdriver type Pliers type 141900 (metal) 809735 141900 (metal) 809735 48680 (plastic) 809734 48680 (plastic) 809734 (Set the selector in position 4) Screwdriver type Removal Tool 21746 21745 809731 809732 Pliers type * Crimping process Place the locator in the pliers. Choose the selector number on the locator according to the contact size to crimp. Strip the wire end (7.5mm for size 12 contact / 6mm for size 16 contact) Insert the wire in the contact crimp barrel of and check through the inspection hole of the contact that wire is wellplaced. Place the contact with the wire into the pliers until the stop. Completely close the tool and after, let it open itself. Visually check if crimping is correct and by the inspection hole of the contact if the wire is well-placed in the crimp barrel. * Contact insertion Always put insert into shell before beginning the contact insertion. Insert the wired contact in the groove of the tool, taking care that the extremity of the tool touches the shoulder of the contact. Insert the contact in its cavity from wiring side and steadily push the tool along the axis of the cavity until the contact locks home. Carefully withdraw the tool , applying a forward pressure on the wire. Pull on the wire to check that the contact is correctly locked. * Contact removal Insert the tool from the mating side and push it along the contact axis until contact unlocks. Pull the contact out from the rear of the connector. IMPORTANT: If you do not use some cavities, always insert a contact to ensure the contact retention and the non-mating for the case when the coding is different between the plug and the receptacle. For good contact retention, do not remove it more than three times. SLR Cabling process: HOW TO ORDER ficheSLRVA24/05/0014:12Page1 How to order: Connectors SLR F F DR 5 37D LC Blank: Connector without protective cap K: Connector and protective cap Kit F: Plug E: Receptacle F: Socket contact insert M: Pin contact insert DR: Straight Backshell (Plug only) Blank: Receptacle Shell size: 37S: 37 size 16 contacts 37D: 37 size 12 contacts 55: 55 size 16 contacts LC: Connector sold without contact. Contacts to be ordered separately (see page 3) Blank: Connector sold with contacts. Note: Inserts are not assembled into shells so that the user chooses among the 12 coding possibilities. Protective caps SLR B F 5 F: Plug protective cap E: Receptacle protective cap Shell size: 50 Do not hesitate to contact us for further information A mphenol Amphenol Socapex Mil/Aero & Industrial Business Unit 948, Promenade de l'Arve - BP 29 F - 74311 Thyez Cedex Tel.: +33 (0) 4 50 89 28 00 - Fax: +33 (0) 4 50 96 19 41 http://www.amphenol.com Sales office Tel.: +33 (0) 1 49 05 30 00 - Fax: +33 (0) 1 49 05 30 43 E105/A Arrangement: The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing. 5 for 50