DESCRIPTION
APPLICATIONS
SLR series connectors are derived
from the standard SLX and have the
particulary to be well adapted to
applications in harsh environments
(Shocks, Vibrations, Humidity) like
shelters, off shore or buiding sites
activities
Coding by user allows a diminution of
the number of references to manage.
• Shelters
• Power
• Check-Control
• Building sites
• Off shore
MAIN CHARACTERISTICS
SLR
Strong points:
• High shock resistance (metallic shells).
• High vibration resistance (one thread lock, low slope).
• High salt spray and chemical agents resistance (specific corrosion resistant
shells plating).
• IP 67, when mated due to receptacle and panel gaskets as well as one piece
backshell with cable clamp and sealing gland backshell.
• Metallic protective caps for plug and receptacle with seal.
• Working temperature: -55°C/+125°C.
• 5 positionning keys for Plug / Receptacle.
• Coding by the user: 12 coding possibilities (from A to M) by insert rotation.
(without any specific tool).
• Crimp removable gold plated machined contacts
• Closed entry female contacts.
• 3 arrangements: 55 size 16 contacts, 37 size 12 contacts, 37 size 16 contacts.
For other arrangement, please consult us.
E105/A
SLR : Harsh
environment just
make it stronger !
SLR : Harsh
environment just
make it stronger !
Reinforced version of the SLX
SLR
General characteristics:
CHARACTERISTIC VALUE NORME
Watertightness IP67 connected NFEN 60 529
Physical shock IK06 / 1.5 kg mass dropped from a 40 cm NFEN 50 102
height
Fall test Fall Height: 1 meter NFC 93 400 - Test 7b
Vibrations 10 to 60 Hz,
amplitude 0.075 mm
60 to 100 Hz, no cut ≥1µs NFC 93 400 - Test 6b
speed 25.4 mm/sec
100 to 600 Hz,
acceleration 5G
Cable clamp tensile strength 40 kg in axis NFC 93 400 - Test 17c
Acceptable cables 20 to 35 mm
diameter:
Humidity 21 days - 43°C to humidity 98% NFC 93 400 - Test 11c
Working temperature -55°C/+125°C NFC 93 400 - Test 11d
Durability ≥100 mating cycles NFC 93 400 - Test 9a
Proof voltage ≥3000 V NFC 93 400 - Test 4a
Insert resistance ≥100 MΩNFC 93400 - Test 3a
Contact resistance ≤2 mΩNFC 93400 - Test 2a-2b
Note: Reference document NFF 61-030
UL 1977 approved
fiche SLR VA 24/05/00 14:12 Page 2
TECHNICAL CHARACTERISTICS
Available arrangements:
Pin connector front face view, A coding.
Dimensions of the connectors:
Dimensions of connectors with protective caps:
• Receptacle:
Possibility to mount the
receptacle at the front
or the rear of the panel
by inverting the panel
gasket.
• Plug:
38,7
72,6
ø 90
4 places ø 5,5
Twice
55,4 Twice
12,5
20,5
137
APPROXIMATE
30,7
ø 60
HJ
ø 5,2
ø 66,6
ø 73
T16 or T12 Pin contact
12.4 to 13.5
1
4
10
17
23
3916
22
31
37
44
50
53
51
45
38
25 29
32
SOCAPEX SLR K EM 555
174 MAXI
52
ø 48
ø 80
ø 56
ø 73
Ø 20 to 35 cables
273
APPROXIMATE
T12 Socket contact: 20.5 to 21.5
T16 Socket contact: 20 to 21
1
4
1723
32
38
45
51
25
29
3
9
16
22
31
37
44 50 55
10
OCAPEX SLR K FFD 555
185 MAXI
OCAPEX SLR K FFD 555
49
J
H
41
SOCAPEX SLR K EM 555
537S
37 size 16 contacts
537D
37 size 12 contacts
555
55 size 16 contacts
1
5
10
16
23
29
34 37
33
28
22
15
9
4
1
4
10
19
15
24
31
35
35
37
34
27
23
18
14
9
3
8
7
2
6
5
11
16
20
25
28
13
17
22
26
30
3332
29
12
1
4
10
17
23
32
38
45
51
25
3
9
16
22
29
31
37
50
55
44
• Positionning of
socket contact
• Positionning
of pin contact
T12 contact: 12.6 to 13.6
T16 contact: 13.1 to 14.1
fiche SLR VA 24/05/00 14:12 Page 3
SLR TECHNICAL CHARACTERISTICS
Contacts:
Permissible wire:
Acceptable cable diameter:
Cabling process:
2 contact types: size 16 and size 12
* The use of a 800629 reducing sleeve is necessary for cable section less than 0.60 mm2for size 16 contacts
* Minimum order quantity: 100 contacts
20 to 35 mm.
Cabling tools:
- Crimping pliers 809857 (M22520/1-01)
- Controlling jauge 809907 (M22520/3-1)
- Locator 21770 (TH 397 Daniels)
Contact size 16 12
Nominal current 13 A 25 A
Contact resistance ≤2 mΩ≤2 mΩ
Contact retention in the insert ≥40 N ≥45 N
Part-number for one pin contact* 800660 21713
Part-number for one socket contact* 800664 21728
Contact Crimp Barrel Pin Wire Section Diameter over Maxi Diameter
Size Inside Diameter Depth Contact Gauge mm
2
conductor (mm) Over Sleeving
(mm) (mm) (mm) (AWG) mini maxi mini maxi (mm)
12 2.5 7.5 3 14→12 1.8 3.3 1.7 2.45 4.2
16 1.95 6.4 1.6 20→14 0.6* 1.91 1 1.9 2.8
Contacts Insertion Tool Removal Tool
Screwdriver type Pliers type
Size 12: Pin 141900 (metal) 809735 21746
Size 12: Socket 141900 (metal) 809735 21745
Size 16: Pin 48680 (plastic) 809734 809731
Size 16: Socket 48680 (plastic) 809734 809732
• Crimping process
Place the locator in the pliers.
Choose the selector number on the locator according to the contact size to crimp.
Strip the wire end (7.5mm for size 12 contact / 6mm for size 16 contact)
Insert the wire in the contact crimp barrel of and check through the inspection hole of the contact that wire
is wellplaced.
Place the contact with the wire into the pliers until the stop.
Completely close the tool and after, let it open itself.
Visually check if crimping is correct and by the inspection hole of the contact if the wire is well-placed in the
crimp barrel.
• Contact insertion
Always put insert into shell before beginning the contact insertion.
Insert the wired contact in the groove of the tool, taking care that the extremity of the tool touches the
shoulder of the contact.
Insert the contact in its cavity from wiring side and steadily push the tool along the axis of the cavity until
the contact locks home.
Carefully withdraw the tool , applying a forward pressure on the wire.
Pull on the wire to check that the contact is correctly locked.
• Contact removal
Insert the tool from the mating side and push it along the contact axis until contact unlocks.
Pull the contact out from the rear of the connector.
IMPORTANT: If you do not use some cavities, always insert a contact to ensure the contact retention and the
non-mating for the case when the coding is different between the plug and the receptacle.
For good contact retention, do not remove it more than three times.
Pliers type
Screwdriver type
(Set the selector in position 4)
fiche SLR VA 24/05/00 14:12 Page 4
HOW TO ORDER
How to order:
Connectors
Protective caps
LC: Connector sold without contact. Contacts to be ordered separately (see page 3)
Blank: Connector sold with contacts.
Arrangement:
37S: 37 size 16 contacts
37D: 37 size 12 contacts
55: 55 size 16 contacts
Shell size:
5 for 50
DR: Straight Backshell (Plug only)
Blank: Receptacle
F: Socket contact insert
M: Pin contact insert
F: Plug
E: Receptacle
Blank: Connector without protective cap
K: Connector and protective cap Kit
SLR F F DR 5 37D LC
Shell size: 50
F: Plug protective cap
E: Receptacle protective cap
SLR B F5
Note: Inserts are not assembled into shells so that the user chooses among the 12 coding possibilities.
Do not hesitate to contact us for further information
E105/A The information given in this document are as a guideline only. We reserve the right to modify our products in any way we deem necessary. Any duplication is prohibited, unless approved in writing.
Amphenol Socapex
Mil/Aero & Industrial Business Unit
948, Promenade de l’Arve - BP 29
F - 74311 Thyez Cedex
Tel.: +33 (0) 4 50 89 28 00 - Fax: +33 (0) 4 50 96 19 41
http://www.amphenol.com
Sales office
Tel.: +33 (0) 1 49 05 30 00 - Fax: +33 (0) 1 49 05 30 43
Amphenol
fiche SLR VA 24/05/00 14:12 Page 1