Solid State Relay G3R-I/O 431
Solid State Relay
G3R-I/O
Compact SSRs for I/O Interface with High
Dielectric Strength Requirements
• High-speed models with optimum input ratings for a variety
of sensors are available.
• Input Modules and Output Modules that have the same
form-factor as the G2R.
• Using a coupler approved by VDE 0884 and assuring an
I/O dielectric strength of 4 kV.
• Incorporating an easy-to-see monitoring indicator.
• Approved by UL, CSA, and TÜV. (“-UTU” models)
Ordering Information
To Order: Select the part number and add the desired coil voltage rating, (e.g., G3R-IAZR1SN-DC5)
■Input Module
■Output Module
Note: When ordering a UL, CSA and EN (TÜV) approved model, add “-UTU” to the model number as shown below:
Example: G3R-OA202SZN-UTU DC5-24.
■I/O Indication
I/O module classification and AC/DC use are indicated on the mark
affixed to the top of the product.
Isolation Indicator Response speed Logic level Rated input
voltage
Model
Supply voltage Supply current
Photocoupler Yes — 4 to 32 VDC 0.1 to 100 mA 100 to 240 VAC G3R-IAZR1SN
High-speed
(1 kHz)
5 VDC G3R-IDZR1SN
12 to 24 VDC
Low-speed
(10 Hz)
5 VDC G3R-IDZR1SN-1
12 to 24 VDC
Isolation Indicator Zero cross
function
Rated output
load
Rated input
voltage
Model
Phototriac Yes Yes 2 A at 100 to 240 VAC 5 to 24 VDC G3R-OA202SZN
No G3R-OA202SLN
Photocoupler — 2 A at 5 to 48 VDC G3R-ODX02SN
1.5 A at 48 to 200 VDC G3R-OD201SN
Mark indication Specification
AC IN Input module, AC input
DC IN Input module, DC input
AC OUT Output module, AC output
DC OUT Output module, DC output
Mark attached to the top of the product
432 Solid State Relay G3R-I/O
Specifications
■Ratings (at an Ambient Temperature of 25°C)
Input Module
Input
Output
Output Module
Input
Output
Note: The minimum current value is measured at 10°C min.
Model Rated voltage Operating voltage Input current Must operate
voltage
Must release
voltage
G3R-IAZR1SN 100 to 240 VAC 60 to 264 VAC 15 mA max. 60 VAC max. 20 VAC min.
G3R-IDZR1SN 5 VDC 4 to 6 VDC 8 mA max. 4 VDC max. 1 VDC min.
12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.
G3R-IDZR1SN-1 5 VDC 4 to 6 VDC 4 VDC max. 1 VDC min.
12 to 24 VDC 6.6 to 32 VDC 6.6 VDC max. 3.6 VDC min.
Model Logic level supply voltage Logic level supply current
G3R-IAZR1SN 4 to 32 VDC 0.1 to 100 mA
G3R-IDZR1SN
G3R-IDZR1SN-1
Model Rated voltage Operating voltage Input current Must operate
voltage
Must release
voltage
G3R-OA202SZN 5 to 24 VDC 4 to 32 VDC 15 mA max.
(at 25°C)
4 VDC max. 1 VDC min.
G3R-OA202SLN
G3R-ODX02SN 8 mA max.
G3R-OD201SN
Model Rated load voltage Load voltage range Load current (see note) Inrush current
G3R-OA202SZN 100 to 240 VAC 75 to 264 VAC 0.05 to 2 A 30 A (60 Hz, 1 cycle)
G3R-OA202SLN
G3R-ODX02SN 5 to 48 VDC 4 to 60 VDC 0.01 to 2 A 8 A (10 ms)
G3R-OD201SN 48 to 200 VDC 40 to 200 VDC 0.01 to 1.5 A 8 A (10 ms)
Solid State Relay G3R-I/O 433
Characteristics
■Input Module
■Output Module
Item G3R-IAZR1SN G3R-IDZR1SN G3R-IDZR1SN-1
Operate time 20 ms max. 0.1 ms max. 15 ms max.
Release time 20 ms max. 0.1 ms max. 15 ms max.
Response frequency 10 Hz 1 kHz 10 Hz
Output ON voltage drop 1.6 V max.
Leakage current 5 μA max.
Insulation resistance 100 MΩmin. between input and output
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance 1,000 m/s2 {approx. 100G}
Ambient temperature Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity Operating: 45% to 85%
Weight Approx. 18 g
Item G3R-OA202SZN G3R-OA202SLN G3R-ODX02SN G3R-OA201SN
Operate time 1/2 of load power source cycle + 1 ms max. 1 ms max.
Release time 1/2 of load power source cycle + 1 ms max. 2 ms max.
Response frequency 20 Hz 100 Hz
Output ON voltage drop 1.6 V max. 2.5 V max.
Leakage current 1.5 mA max. 1 mA max.
Insulation resistance 100 MΩmin. between input and output
Dielectric strength 4,000 VAC, 50/60 Hz for 1 min. between input and output
Vibration resistance 10 to 55 Hz, 1.5-mm double amplitude
Shock resistance 1,000 m/s2 {approx. 100G}
Ambient temperature Operating: -30°C to 80°C (with no icing)
Storage: -30°C to 100°C (with no icing)
Approved standards UL File No. E64562
CSA File No. LR35535
TÜV File No. R9650094 (EN60950)
Ambient humidity Operating: 45% to 85%
Weight Approx. 18 g
434 Solid State Relay G3R-I/O
Engineering Data
Load Current vs. Ambient Temperature
Inrush Current Resistivity
Non-repetitive (Keep the inrush current to half the rated value if it occurs repetitively.)
2
1.5
−30
0.7
0.5
1
−20 0 20 30 40 55 60 80 100
1.4
−30 −20 0 20 40 55 60 80 100
2
1.5
0.5
1
0.6
1.1
2
1.5
0.5
1
−30 −20 0 20 40 55 60 80 100
1.4
4-point mounting (see note 1)
16-point mounting (see note 2) 4-point mounting (see note 1)
4-point mounting (see note 1)
16-point mounting (see note 2)
G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-OD201SN(-UTU) (40 to 200 VAC)G3R-ODX02SN(-UTU) (4 to 60 VDC)
Ambient temperature (
°
C)
Load current (A)
Ambient temperature (
°
C)
Load current (A)
Ambient temperature (
°
C)
Load current (A)
Note: 1. When G730-Z0M04-B is mounted.
2. When G70A-Z0C16 is mounted.
Single-point
mounting Single-point
mounting
16-point mounting
(see note 2)
Single-point
mounting
30
20
10
10 30 50 100 200 500 1000 5000
10
9
8
7
6
5
4
3
2
1
010 30 50 100 500 1000 2000300
10
9
8
7
6
5
4
3
2
1
010 30 50 100 500 1000 2000300
G3R-OA202SZN(-UTU)/OA202SLN(-UTU) G3R-OD201SN(-UTU)G3R-ODX02SN(-UTU)
Inrush current (A)
Energized time (ms)
Inrush current (A)
Energized time (ms)
Inrush current (A)
Energized time (ms)
Solid State Relay G3R-I/O 435
Dimensions
Unit: mm (inch)
■G3R
■Connecting Sockets
4
57.5
9.6
3
4
1
2
20
0.5
5.2
17.4
4.7
4.75
4.75
0.5
10
15
(+)
(−)
3
4
1 5
(−) (+)
13 max. 28 max.
29 max.
Load
Input
Terminal Arrangement/
Internal Connections
(Bottom View)
58.5 *
Five, M3.5×8
12
P2RF-05
71.5 max.
19.5 max.
54 max.
30 max.
4 dia.
4.2-dia. hole
P2RF-05 Socket
G3R I/O Relay
M3 (M3 x16) or
3.2-dia. hole
* Indicates a value when using the PFP-@N
Supporting Rail.
The value is 67.5 when using the PFP-@N2.
62.5 **
(66.5)***
P2RF-05-E
G3R I/O Relay
3.2-dia. hole
M3 or 3.5-dia. hole
59 max.
48 max.
M3.5 screw
85.5 max.
61 max.
3.5-dia.
hole
PFRF-05-E
Socket
** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-05-E
The value is 71.5 when using the PFP-@N2.
*** Indicates a value when using the PFP-@N
Supporting Rail with the P2RF-08-E
The value is 75.5 when using the PFP-@N2.
P2R-05A 14.5 max.
35.5 max.
Five, 3x1.5-dia. hole
G3R I/O Relay
P2R-05A Socket
36 max.
(Panel thickness must
be 1.6 to 2.0 mm.) (For use when mounting in a panel or in
the P2R-P mounting plate )
436 Solid State Relay G3R-I/O
■Socket Mounting Plate
Use the P2R-P Socket Mounting Plate when arranging several P2R-05A Sockets in a row.
P2R-P
■Approvals
UL Recognized (File No. E64562) / CSA Certified (File No. LR35535)
P2R-05P
Dimensional tolerance is ±0.1.
G3R I/O Relay
P2R-05P Socket
Five, 1.6-dia. hole
35.5 max.
14.5 max.
36 max.
P2R-057P G3R I/O Relay
P2R-057P Socket
Five, 1.6-dia. hole
14 max.
32 max.
41 max.
Square hole
R2.25
10 ellipses
Model G3R- Module type Rating
IAZR1SN Input 100 to 240 VAC
IDZR1SN Input 5 VDC, 12 to 24 VDC
IDZR1SN-1 Input 5 VDC, 12 to 24 VDC
OA202SZN Output 5 to 24 VDC
OA202SLN Output 5 to 24 VDC
ODX02SN Output 5 to 24 VDC
OD201SN Output 5 to 24 VDC
Model G3R- Module type Output rating
IAZR1SN Input 32 VDC, 100 mA (General Purpose)
IDZR1SN Input 32 VDC, 100 mA (General Purpose)
IDZR1SN-1 Input 32 VDC, 100 mA (General Purpose)
OA202SZN Output 264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
OA202SLN Output 264 VAC, 2 A (General Purpose)
264 VAC, 1 A (Tungsten)
264 VAC, 1 A FLA, 6 A LRA
ODX02SN Output 60 VDC, 2 A (General Purpose)
60 VDC, 1 A (Tungsten)
OD201SN Output 200 VDC, 1.5 A (General Purpose)
200 VDC, 0.75 A (Tungsten)
Solid State Relay G3R-I/O 437
Precautions
■Connection
With the SSR for DC switching, the load can be connected to either
positive or negative output terminal of the SSR.
■Protective element
Since the SSR does not incorporate an overvoltage absorption com-
ponent, be sure to connect an overvoltage absorption component
when using the SSR under an inductive load.
■Precaution of Mounting Output Modules
G3R G3R G3R
With up to four G3R SSRs mounted closely and
side by side, 2-A loads can be switched.
With a G3R SSRs mounted every other slot,
2-A loads can be switched.
Solid State Relay G3R-I/O
OMRON ON-LINE
Global - http://www.omron.com
USA - http://www.components.omron.com
Cat. No. X301-E-1b Printed in USA
OMRON ELECTRONIC
COMPONENTS LLC
55 E. Commerce Drive, Suite B
Schaumburg, IL 60173
847-882-2288
09/11 Specifications subject to change without notice
All sales are subject to Omron Electronic Components LLC standard terms and conditions of sale, which
can be found at http://www.components.omron.com/components/web/webfiles.nsf/sales_terms.html
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
