Philips Components Chip resistors Packaging PACKAGING Peel-off force Tape and reel specifications Peel-off forces of both cardboard and blister tapes are in accordance with "IEC 286-3" ; that is, 0.1 N to 0.7 N at a peel-off speed of 120 mm/minute and 0.2 N to 1.0 N at a peel-off speed of 300 mm/minute. For both speeds, the peel-off angle should be between 165 and 180. All tape and reel specifications are in accordance with the second edition of "IEC 286-3". Basic dimensions are given in Figs 1, 2 and 4, and Tables 1, 2 and 4. Cardboard tape P0 handbook, full pagewidth P2 D0 E F W B0 A0 MBD123 P1 Cumulative tolerance over 10 holes: 0.2 mm. Bottom fixing tape thickness: 50 10 m. Top fixing tape thickness: 50 10 m. For dimensions see Table 1. Carrier tape thickness: 0.6 0.05 mm (0402, 0603) 0.75 0.05 mm (1206; 0805). Fig.1 Cardboard tape. Table 1 Dimensions of cardboard tape for relevant chip size; see Fig.1 PRODUCT SIZE CODE SYMBOL 0402 0603 0805 1206 UNIT SIZE TOL. SIZE TOL. SIZE TOL. SIZE TOL. A0 0.70 0.05 1.0 +0.2/-0 1.5 +0.2/-0 1.85 +0.2/-0 mm B0 1.20 0.05 1.8 +0.2/-0 2.25 +0.2/-0 3.45 +0.2/-0 mm W 8 0.2 8 0.3 8 0.3 8 0.3 mm E 1.75 0.1 1.75 0.1 1.75 0.1 1.75 0.1 mm F 3.5 0.05 3.5 0.05 3.5 0.05 3.5 0.05 mm D0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 1.5 +0.1/-0 mm P0 4 0.1 4 0.1 4 0.1 4 0.1 mm P1 2 0.1 4 0.1 4 0.1 4 0.1 mm P2 2 or 0 0.05 2 0.05 2 0.05 2 0.05 mm 1996 Nov 15 1 Philips Components Chip resistors Packaging * Because the carrier tape is made of polycarbonate, a homogeneous material (mono-plastic), it is ideally suited for recycling. Embossed carrier tape ENVIRONMENTAL CONSIDERATIONS * Cover tape, carrier tape and reel do not contain environmentally-harmful PVC materials. * Compared to other PVC-free materials polycarbonate shows excellent stiffness and very little deformation with temperature. * Tape and reel are antistatic. handbook, full pagewidth K 0 P0 D0 T P2 E F cover tape W B0 MBG516 A0 T1 T2 D1 P1 Cumulative pitch error: 0.2 mm over 10 pitches. Cumulative tolerance over 10 holes: 0.2 mm. K0: chosen so that the orientation of the component cannot change. For W = 8 mm: T2 = 2.5 mm max. For W = 12 mm: T2 = 4.5 mm max. For dimensions see Table 2. direction of unreeling Fig.2 Embossed carrier tape. Table 2 Dimensions of embossed carrier tape for relevant chip size; see Fig.2 SYMBOL A0 nominal clearance; note 1 B0 nominal clearance; note 1 K0 minimum clearance; note 1 W E F D0 D1 P0; note 2 P1 P2 PRODUCT SIZE CODE 0805 1206 8.1 1.75 3.5 1.5 1 4 4 2 0.30 0.20 0.10 8.1 1.75 3.5 1.5 1 4 4 2 Notes 1. Possible product displacement in pocket. 2. P0 pitch tolerance over any 10 pitches is 0.2 mm. 1996 Nov 15 2 1218 12 1.75 5.5 1.5 1.5 4 8 2 TOLERANCE UNIT - - - 0.2 0.1 0.05 +0.1/-0.0 +0.1/-0.0 0.1 0.1 0.05 mm mm mm mm mm mm mm mm mm mm mm Philips Components Chip resistors Packaging Leader/trailer tape specification leader end cover tape only empty compartments with cover tape trailer end trailer (max. 260 mm) leader 120 40 mm 400 mm MEA529 - 2 Fig.3 Leader/trailer tape. Table 3 Leader/trailer tape data DESCRIPTION VALUE Minimum length of empty compartments at leader end 400 mm of which a minimum 240 mm of empty compartments are covered with cover tape and 120 40 mm cover tape only. Minimum length of empty compartments at trailer end 1996 Nov 15 208 mm or 260 mm; if the length is 260 mm an extra product is placed at 208 mm to mark this position 3 Philips Components Chip resistors Packaging REEL SPECIFICATIONS W2 handbook, full pagewidth 20.5 12.75 0.15 N 0 A MSA284 W1 Dimensions in mm. For reel dimensions see Table 4. Fig.4 Reel. Table 4 Reel dimensions; see Fig.4 PRODUCT SIZE CODE 0402 UNITS PER REEL A (mm) 10000 20000 1206; 0603; 0805 TAPE WIDTH (mm) 10000 1996 Nov 15 1000 5000 W1 (mm) W2 MAX. (mm) 8.4 +1.5/-0.0 14.4 12.4 +2/-0.0 18.4 180 330 8 250 5000 1218 N (mm) 180 180 12 286 4 62 1.5 Philips Components Chip resistors Packaging BULK CASE SPECIFICATION Features and benefits: * Reduced costs - Storage - Transport - Machine handling - Packaging. handbook, 4 columns slider shutter coupled portion MGB377 For dimensions see Table 5. Fig.5 Bulk case outline. Table 5 Table 6 Bulk case dimensions; see Fig.5 LENGTH (mm) WIDTH (mm) THICKNESS (mm) 110 35 12 Product size versus packaged quantity 1996 Nov 15 PRODUCT SIZE CODE UNITS PER CASE 0402 100000 0603 25000 0805 10000 5