3
IR2101/IR21014/IR2102/IR21024
www.irf.com
Symbol Definition Min. T yp. Max. Units Test Conditions
VIH Logic “1” input voltage (IR2101)
Logic “0” input voltage (IR2102)
VIL Logic “0” input voltage (IR2101)
Logic “1”input voltage (IR2102)
VOH High level output voltage, VBIAS - VO— — 100 IO = 0A
VOL Low level output voltage, VO— — 100 IO = 0A
ILK Offset supply leakage current — — 50 VB = V S = 600V
IQBS Quiescent VBS supply current — 30 55 VIN = 0V or 5V
IQCC Quiescent VCC supply current — 150 270 VIN = 0V or 5V
IIN+ Logic “1” input bias current
IIN- Logic “0” input bias current
VCCUV+ VCC supply undervoltage positive going 8 8. 9 9.8
threshold
VCCUV- VCC supply under voltage negative going 7.4 8.2 9
threshold
IO+ Output high short circuit pulsed current 13 0 210 — VO = 0V
VIN = Logic “1”
PW ≤ 10 µs
IO- Output low shor t circuit pulsed current 270 36 0 — VO = 15V
VIN = Logic “0”
PW ≤ 10 µs
Symbol Definition Min. T yp. Max. Units T est Conditions
ton Tur n-on propagation delay — 160 220 VS = 0V
toff Tur n-off propagation delay — 150 220 VS = 600V
trTur n-on rise time — 100 170 n s
tfTur n-off fall time — 50 90
MT Delay matching, HS & LS turn-on/off — — 50
Static Electrical Characteristics
VBIAS (VCC, VBS) = 15V and TA = 25°C unless otherwise specified. The VIN, VTH and IIN parameters are referenced to
COM. The VO and IO parameters are referenced to COM and are applicable to the respective output leads: HO or LO.
Dynamic Electrical Characteristics
VBIAS (VCC, VBS) = 15V, CL = 1000 pF and TA = 25°C unless otherwise specified.
V
mA
3 — — VCC = 10V to 20V
V
— — 0.8 VCC = 10V to 20V
mV
µA
— 3 10
— — 1
VIN = 5V (IR2101)
VIN = 5V (IR2102)
VIN = 0V (IR2101)
VIN = 0V (IR2102)