(1/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
Common Mode Choke Coils(Line Filters) for AC Power Supply
Toroidal Core Type TF Series
TDK common mode choke coils(line filters) are used in a wide
range of prevention of electromagnetic interference(EMI) and radio
frequency interference(RFI) from power supply lines and for pre-
vention of multifunctioning of products such as measuring equip-
ment and system equipment.
FEATURES
• Wide range of selection.
• High impedance at applicable frequency.
• High self-resonant frequency.
PRODUCT IDENTIFICATION
(1) Core shape
TF: Toroidal core
(2) Dimensional code
Width×Depth
(3) External shape code
V: Vertical type H: Horizontal type
(4) High µ material
(5) Inductance value
Example) 133:13mH
(6) Rated current value
Example) 3R0:3.0A
(7) Product management number
SELECTION CHART
∗ Handling power=(Inductance value)×(Current)2. It is possible to design within the range below this value.
[Example] The coil for 2A can make even the inductance of 2.5mH or less a product for handling power 10.
Conformity to RoHS Directive
TF V -AYR
-01
(1) (2) (3) (4) (5) (6) (7)
Series Configuration Type Inductance value
min.
Rated current
(A)
Handling power∗
L×I2(mH×A2)
Weight
(g)typ.
Minimum
package quantity
(pieces/box)
TF
Vertical type
TF1813V 2 to 20mH 0.7 to 3.2 20 5 960
TF2518V 0.65 to 9mH 2.5 to 10 50 15 560
TF2721V 1 to 13mH 2.5 to 10 75 20 460
TF3020V 0.35 to 13mH 3 to 20 130 30 440
TF3525V 0.65 to 20mH 3 to 20 195 41 240
Horizontal type
TF1713H 2 to 20mH 0.7 to 3.2 20 5.3 960
TF2520H 0.65 to 9mH 2.5 to 10 50 15 550
TF2722H 1 to 13mH 2.5 to 10 75 20 380
TF3022H 0.35 to 13mH 3 to 20 130 32 320
TF3526H 0.65 to 20mH 3 to 20 195 42 280
Vertical type
(For high frequency)
TF2628V-1H 25 to 65µH 6 to 12 3.65 18 700
TF3524V-1H 25 to 120µH 8 to 20 10.8 40 320
• Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
Horizontal Type TF Series
FEATURES
• This series uses a high permeability toroidal ferrite core and
therefore provide large inductance with a little number of turns.
• Therefore its stray capacity is small and it keeps the impedance
required to effectively suppress high frequency noises.
• Products mounted on a base with fixed leads are easy to insert
to circuit boards.
TF1713H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
17max.
7±0.5
3.5±1 13max. 20max.
17.5±0.5
Weight: 5.3g typ.
Recommended hole diameter: ø1.2
Dimensions in mm
1
14
23
2
4
3
ø0.7
100
10
1
0.1
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
A153Y1R0
A203Y0R7
A202Y3R2
A502Y2R0
A652Y1R6
Part No. Inductance
(mH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF1713H-A203Y0R7-01 20 0.73 0.7
TF1713H-A153Y1R0-01 15 0.44 1
TF1713H-A652Y1R6-01 6.5 0.19 1.6
TF1713H-A502Y2R0-01 5 0.14 2
TF1713H-A202Y3R2-01 2 0.065 3.2
TF1713H-A 960pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(3/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF2520H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
4
2
1
2
3
14
3
Weight: 15g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
25max.
20max.3.75±0.75
(20)
(11)
25max.
Lot No.
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
651Y10R0
102Y8R0
252Y5R0
502Y4R0
702Y3R0
902Y2R5
Part No. Inductance
(mH)min.
DC
resistance
(Ω)max.
Rated
current
Iac(A)max.
ød
(mm)
TF2520H-A902Y2R5-01 9 0.12 2.5 0.6
TF2520H-A702Y3R0-01 7 0.095 3 0.65
TF2520H-A502Y4R0-01 5 0.075 4 0.7
TF2520H-A252Y5R0-01 2.5 0.05 5 0.75
TF2520H-A102Y8R0-01 1 0.025 8 0.95
TF2520H-A651Y10R0-01 0.65 0.02 10 1
TF2520H-A 550pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(4/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF2722H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
4
2
1
2
3
14
3
Weight: 20g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
27max.
22max.3.75±0.75
(20)
(11)
27max.
Lot No.
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
133Y2R5
422Y5R0
652Y4R0
103Y3R0
102Y10R0
152Y8R0
Part No. Inductance
(mH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF2722H-A133Y2R5-01 13 130 2.5 0.65
TF2722H-A103Y3R0-01 10 90 3 0.7
TF2722H-A652Y4R0-01 6.5 60 4 0.8
TF2722H-A422Y5R0-01 4.2 40 5 0.9
TF2722H-A152Y8R0-01 1.5 20 8 1
TF2722H-A102Y10R0-01 1 11 10 1.2
TF2722H-A 380pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(5/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF3022H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
4
2
1
2
3
14
3
Weight: 32g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
30max.
22max.3.75±0.75
(24)
(11)
30max.
Lot No.
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
351Y20R0
701Y15R0
172Y10R0
252Y8R0
402Y7R0
502Y6R0
602Y5R0
802Y4R0
133Y3R0
Part No. Inductance
(mH)min.
DC
resistance
(Ω)max.
Rated
current
Iac(A)max.
ød
(mm)
TF3022H-A133Y3R0-01 13 0.1 3 0.75
TF3022H-A802Y4R0-01 8 0.07 4 0.8
TF3022H-A602Y5R0-01 6 0.05 5 0.9
TF3022H-A502Y6R0-01 5 0.04 6 0.95
TF3022H-A402Y7R0-01 4 0.035 7 1
TF3022H-A252Y8R0-01 2.5 0.025 8 1.1
TF3022H-A172Y10R0-01 1.7 0.015 10 1.3
TF3022H-A701Y15R0-01 0.7 0.007 15 1.6
TF3022H-A351Y20R0-01 0.35 0.005 20 1.7
TF3022H-A 320pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(6/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF3526H-A(HORIZONTAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
4
2
1
2
3
14
3
Weight: 42g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
33max.
26max.3.75±0.75
(11)
35max.
Lot No.
(28)
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
651Y20R0
102Y15R
302Y10R
452Y8R0
602Y7R0
702Y6R0
103Y5R0
123Y4R0
203Y3R0
Part No. Inductance
(mH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF3526H-A203Y3R0-01 20 130 3 0.75
TF3526H-A123Y4R0-01 12 75 4 0.85
TF3526H-A103Y5R0-01 10 55 5 0.95
TF3526H-A702Y6R0-01 7 45 6 1
TF3526H-A602Y7R0-01 6 35 7 1.1
TF3526H-A452Y8R0-01 4.5 25 8 1.2
TF3526H-A302Y10R0-01 3 18 10 1.3
TF3526H-A102Y15R0-01 1 6 15 1.7
TF3526H-A651Y20R0-01 0.65 4 20 1.8
TF3526H-A 280pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(7/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
Vertical Type TF Series
TF1813V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
3.5±1 16max.
Weight: 5g typ.
Recommended hole diameter: ø1.2
Dimensions in mm
1
2
4
3
18max.
14±0.5
7±0.5
14
23
ø0.7 13max.
100
10
1
0.1
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
A153Y1R0
A203Y0R7
A202Y3R2
A502Y2R0
A652Y1R6
Part No. Inductance
(mH)min.
DC resistance
(Ω)max.
Rated current
Iac(A)max.
TF1813V-A203Y0R7-01 20 0.73 0.7
TF1813V-A153Y1R0-01 15 0.44 1
TF1813V-A652Y1R6-01 6.5 0.19 1.6
TF1813V-A502Y2R0-01 5 0.14 2
TF1813V-A202Y3R2-01 2 0.065 3.2
TF1813V-A 960pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(8/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF2518V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ød
ø25max.
18max.
27max.
3.75±0.75
4
2
1
3
L
1
L
2
Weight: 15g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
(13)
(10)
14
23
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
A651Y10R0
A102Y8R0
A252Y5R0
A502Y4R0
A702Y3R0
A902Y2R5
Part No. Inductance
(mH)min.
DC
resistance
(Ω)max.
Rated
current
Iac(A)max.
ød
(mm)
TF2518V-A902Y2R5-01 9 0.12 2.5 0.6
TF2518V-A702Y3R0-01 7 0.095 3 0.65
TF2518V-A502Y4R0-01 5 0.075 4 0.7
TF2518V-A252Y5R0-01 2.5 0.05 5 0.75
TF2518V-A102Y8R0-01 1 0.025 8 0.95
TF2518V-A651Y10R0-01 0.65 0.02 10 1
TF2518V-A 560pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(9/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF2721V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ød
ø27max.
21max.28max.
3.75±0.75
(15)
(10)
14
23
4
2
1
3
L
1
L
2
Weight: 20g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
133Y2R5
422Y5R0
652Y4R0
103Y3R0
102Y10R0
152Y8R0
Part No. Inductance
(mH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF2721V-A133Y2R5-01 13 130 2.5 0.65
TF2721V-A103Y3R0-01 10 90 3 0.7
TF2721V-A652Y4R0-01 6.5 60 4 0.8
TF2721V-A422Y5R0-01 4.2 40 5 0.9
TF2721V-A152Y8R0-01 1.5 20 8 1
TF2721V-A102Y10R0-01 1 11 10 1.2
TF2721V-A 460pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(10/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF3020V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ø30max.
ød
20max.
31max.
3.75±0.75
(15)
(10)
14
23
4
2
1
3
L
1
L
2
Weight: 30g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
351Y20R0
701Y15R0
172Y10R0
252Y8R0
402Y7R0
502Y6R0
602Y5R0
802Y4R0
133Y3R0
Part No. Inductance
(mH)min.
DC
resistance
(Ω)max.
Rated
current
Iac(A)max.
ød
(mm)
TF3020V-A133Y3R0-01 13 0.1 3 0.75
TF3020V-A802Y4R0-01 8 0.07 4 0.8
TF3020V-A602Y5R0-01 6 0.05 5 0.9
TF3020V-A502Y6R0-01 5 0.04 6 0.95
TF3020V-A402Y7R0-01 4 0.035 7 1
TF3020V-A252Y8R0-01 2.5 0.025 8 1.1
TF3020V-A172Y10R0-01 1.7 0.015 10 1.3
TF3020V-A701Y15R0-01 0.7 0.007 15 1.6
TF3020V-A351Y20R0-01 0.35 0.005 20 1.7
TF3020V-A 440pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
(11/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF3525V-A(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=1kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ø35max.
ød
25max.
35max.
3.75±0.75
(16)
(18)
14
23
4
2
1
3
L
1
L
2
Weight: 41g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
100
10
1
0.1
0.01
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
651Y20R0
102Y15R0
302Y10R0
452Y8R0
602Y7R0
702Y6R0
103Y5R0
123Y4R0
203Y3R0
Part No. Inductance
(mH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF3525V-A203Y3R0-01 20 130 3 0.75
TF3525V-A123Y4R0-01 12 75 4 0.85
TF3525V-A103Y5R0-01 10 55 5 0.95
TF3525V-A702Y6R0-01 7 45 6 1
TF3525V-A602Y7R0-01 6 35 7 1.1
TF3525V-A452Y8R0-01 4.5 25 8 1.2
TF3525V-A302Y10R0-01 3 18 10 1.3
TF3525V-A102Y15R0-01 1 6 15 1.7
TF3525V-A651Y20R0-01 0.65 4 20 1.8
TF3525V-A 240pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(12/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
Vertical Type (For High Frequency) TF Series
FEATURES
• This series is designed to reduce stray capacity between
windings by using a single-layer coil construction on Ni-Zn ferrite
cores, which offer excellent high frequency characteristics.
• This series provides excellent noise suppression for high
frequency ranges including the FM band.
TF2628V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ød
ø27max.
21max.28max.
5±1
(15)
(10)
14
23
4
2
1
3
L
1
L
2
Weight: 18g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
10
1
0.1
0.01
0.001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
250Y12R0
450Y9R0
650Y6R0
Part No. Inductance
(µH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF2628V-650Y6R0-1H 65 20 6 0.8
TF2628V-450Y9R0-1H 45 12 9 1
TF2628V-250Y12R0-1H 25 9 12 1.2
TF2628V-1H 700pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
(13/13)
001-03 / 20061027 / e93_tf.fm
• All specifications are subject to change without notice.
TF3524V-1H(VERTICAL TYPE WITH TERMINAL BASE) TYPE
SHAPES AND DIMENSIONS/CIRCUIT DIAGRAM TYPICAL ELECTRICAL CHARACTERISTICS
IMPEDANCE vs. FREQUENCY CHARACTERISTICS
ELECTRICAL CHARACTERISTICS
(STANDARD LINE UP)
• Measuring equipment of inductance value:
LCR meter(HP4261A, HP4263B or equivalent)[f=10kHz]
PACKAGING QUANTITIES
RATINGS
∗1 Pb free solder(Sn-3Ag-0.5Cu)
∗2 However, this product is not recognized by each regulations.
ø35max.
ød
25max.
35max.
5±1
(16)
(18)
14
23
4
2
1
3
L
1
L
2
Weight: 40g typ.
Recommended hole diameter: ød+0.5
Dimensions in mm
10
1
0.1
0.01
0.001
0.01 0.1 1 10 100
Impedance(kΩ)
Frequency(MHz)
250Y20R0
450Y15R0
750Y12R0
121Y8R0
Part No. Inductance
(µH)min.
DC
resistance
(mΩ)max.
Rated
current
Iac(A)max.
ød
(mm)
TF3524V-121Y8R0-1H 120 20 8 1
TF3524V-750Y12R0-1H 75 10 12 1.3
TF3524V-450Y15R0-1H 45 7 15 1.6
TF3524V-250Y20R0-1H 25 5 20 1.8
TF3524V-1H 320pieces/box
Item Standard value Conditions
Rated voltage(V) 80 to 280 50Hz/60Hz
Dielectric withstanding
voltage(V) 2000 Between each winding for
1 minute
Insulation resistance
(MΩ)100min. Between each winding for
DC.500V
Temperature rise(°C) 45max. With line resistance
Operating temperature
range(°C) –20 to +120 Including self-temperature
rise
Storage temperature
range(°C) –20 to +85
Resistance to
soldering tenperature∗1
260±5°C, 10±1sec Solder bath method
350±5°C, 5sec max. Soldering iron method
Applicable safety
standard∗2
Electrical Appliance and Material Safety
Law ("DENAN"), IEC60065, UL6500, CSA C22.2
