Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(C) Stacked metallized PPS film as dielectric with simple mold-less construction Features * Small in size * Low loss and excellent frequency characteristics * For reflow soldering * RoHS directive compliant Recommended Applications * Time-constant * Filtering * Oscillation and resonance * Resonance circuit for LCD backlight inverter unit Explanation of Numbers 1 2 3 4 5 E C H U 1 Product code Dielectric & construction 6 8 9 10 11 C Rated voltage 1 7 Capacitance Cap. Tol. Suffix G 2 % J 5 % 100 VDC Suffix 9 V Tape width 12 mm 16 mm Specifications Category temp. range (Including temperature-rise on unit surface) -55 to 105 Rated voltage 100 VDC Capacitance range Capacitance tolerance 0.010 F to 0.22 F(E12) 2 %(G),5 %(J) Withstand voltage Between terminals : Rated volt. (VDC)150 % 60 s Dissipation factor (tan ) tan0.6 % (20 , 1 kHz) Insulation resistance (IR) IR3000 (20 , 100 VDC, 60 s) Soldering conditions Reflow soldering : 260 C max. and 95 s max. at more than 220 C (Temp. at cap. Surface) In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of "Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage". Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. - FC18 - Plastic Film Capacitors size L W H code E1 4.8 3.3 1.4 E2 4.8 3.3 2.0 E3a 4.8 3.3 2.4 E3 4.8 3.3 2.8 D1 6.0 4.1 1.8 D2 6.0 4.1 2.0 D3 6.0 4.1 2.4 D4 6.0 4.1 2.8 D5 6.0 4.1 3.2 Z 7.1 5.0 Y 7.1 6.3 Refer to the column " Rating,Dimensions&Quantity" Taping Specification for Automatic Mounting Refer to the page of taping specifications. Rating, Dimensions & Quantity/Reel Capacitance tolerance: 2 % (G), 5 % (J) Rated volt. 100 VDC Cap.(F) 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No. ECHU1103C9 ECHU1123C9 ECHU1153C9 ECHU1183C9 ECHU1223C9 ECHU1273C9 ECHU1333C9 ECHU1393C9 ECHU1473C9 ECHU1563C9 ECHU1683C9 ECHU1823C9 ECHU1104C9 ECHU1124C9 ECHU1154CV ECHU1184CV ECHU1224CV Dimensions (mm) L 4.8 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 6.0 7.1 7.1 7.1 7.1 7.1 7.1 W 3.3 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 4.1 5.0 5.0 5.0 6.3 6.3 6.3 H 1.4 1.4 2.0 2.0 2.4 2.8 1.8 2.0 2.4 2.8 3.2 2.8 3.0 3.4 3.4 4.0 4.8 Size Code E1 E1 E2 E2 E3a E3 D1 D2 D3 D4 D5 Z Z Z Y Y Y Q'ty 3000 2000 3000 2000 1500 1000 Cap. tol. code Recommended for Land Dimensions (mm) Land dimensions Size code E1,E2,E3a,E3 D1,D2,D3,D4,D5 Z Y Reflow soldering A B C 2.6 3.8 4.5 4.5 6.6 7.8 9.0 9.0 3.0 3.8 4.6 5.7 It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when "Recommender for Land dimensions" is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. - FC19 - Chip Dimensions in mm (not to scale) Construction ECHU (C) Type DC100V series (Stacked Metallized Film) Electrical Characteristics <Typical Data > Temperature Characteristics at 1kHz 10 5 0 0.01uF,0.068uF,0.22uF -5 Capacitance change(%) Capacitance change(%) 10 Frequency Characteristics -10 5 0.22uF 0.068uF 0.01uF 0 -5 -10 -60 -40 -20 0 20 40 60 80 100 120 140 1 10 Temperature(Degree C) at 1kHz 4 3 2 1 0.01uF,0.068uF,0.22uF 0 -60 -40 -20 0 8 6 4 2 0.22uF 0 0.068uF 0.01uF 20 40 60 80 100 120 140 1 10 100 1000 Frequency(kHz) at DC100V 100 0.01uF 1.E+11 0.068uF 1.E+10 0.22uF 1.E+09 1.E+08 1.E+07 1.E+06 0.01uF Impedance(ohm) Insulation resistance(ohm) Temperature(Degree C) 1.E+12 1000 10 Dissipation factor(%) Dissipation factor(%) 5 100 Frequency(kHz) 10 1 0.068uF 0.22uF 0.1 0.01 -60 -40 -20 0 20 40 60 80 100 120 140 Temperature(Degree C) 100 1000 10000 Frequency(kHz) 100000 ECHU (C) Type DC100V series (Stacked Metallized Film) Applicable Specifications Permissible Current Permissible Voltage 2.5 (at sine wave) 0.22uF 0.18uF 0.15uF Effective value (Arms) 2.0 0.12uF 0.1uF 1.5 0.082uF 0.068uF 0.056uF 0.047uF 1.0 0.039uF Effective value (Vrms) 100 0.01uF to 0.027uF 0.033uF to 0.056uF 0.068uF 0.082uF 0.1uF 0.12uF 0.15uF 0.033uF 0.027uF 0.022uF 0.018uF 0.015uF 0.012uF 0.01uF 0.5 0.18uF 0.22uF 0.0 10 Frequency(kHz) 10 100 Pulse Handling Capability (dv/dt) 0.010 103 1.80 0.012 123 2.16 0.015 153 0.018 183 0.022 223 3.96 0.027 273 4.86 0.033 333 4.29 0.039 393 5.07 0.047 473 0.056 563 7.28 0.068 683 8.84 0.082 823 8.20 0.10 104 10.00 0.12 124 0.15 154 0.18 184 18.00 0.22 224 22.00 180 130 100 200 Current(0-P) (A) 2.70 150 3.24 6.11 DC Rated Voltage (V) DC 100V dV/dt (V/us) 100 Voltage Derating by Temperature (Max 10000cycles) Rating Capacitance code Voltage Value(uF) Frequency(kHz) 10 0.01uF to 0.22uF 100 50 12.00 15.00 0 -60 -40 -20 0 20 40 60 80 100 120 140 Surface Temperature of Capacitor(DegreeC) *Please consult Panasonic if your condition exceeds the above *Permissible voltage graph is the case of sine waveform. When you use this product, peak voltage must not exceed DC rated voltage. *The current(0-P) value is calculated using nominal capacitance.