1350-1, 1350-2 Tape
Flame-Retardant Tape with Polyester Film and Acrylic
Pressure-Sensitive Adhesive
Data Sheet
Product Description
3M™ 1350 Tape is an electrical insulating polyester
film tape, which meets the flame-retardancy
requirements of UL 510. It consists of materials that
are represented in many UL Recognized Insulation
Syatems and has a Ul 130˚C temperature rating. It
also offers excellent flagging and solvent resistance;
good wet grab; smooth, even unwind and is suitable
for use on automated equipment.
• UL Recognized flame retardant
• UL Recognized Class 130˚C/CSA
• Excellent Flagging Resitant
• Printable
• Solvent resistant without thermosetting
• Excellent shelf life
Colors
3M 1350 Tape is available in yellow, white and black.
Applications
3M 1350 Tape is especially suited for applications
such as wrapping coils, capacitors, wire harnesses,
transformers, shaded pole motors and fractional
horsepower motors.
UL and CSA Component Recognition
UL Recognized for use at temperature not exceeding
130˚C, flame retardant per UL Standard 510, UL
File Number E17385, Product Category AOANZ2.
Underwriters Laboratories (UL) Recognized
products are evaluated for use as components of
end-product equipment that is Listed or Classified
by UL. To achieve Underwriters Laboratories
Recognition, component construction must meet UL
specifications and conditions of acceptability for
proper and safe use of the component products, 3M
Flame Retardant Tape with Polyester Film and
Acrylic Pressure Sensitive Adhesive.
Typical Properties 1-mil Film 2-mil Film
Adhesive Acrylic Acrylic
Backing Polyester Film Polyester Film
Backing Thickness1One mil (25 micron) Two mils (50 micron)
Total Thickness12.5 mils / 0,063 mm 3.5 mils / 0,088 mm
Colors Yellow, White, Black Yellow, White, Black
Temperature Class 130˚C (266˚F) 130˚C (266˚F)
Dielectric Breakdown15500 Volts 7,000 Volts
Insulation Resistance1(megohms) >1 x 106>1 x 106
Breaking Strength125 lbs. / in (44 N/10mm) 50 lbs. / in(88N/10mm)
Elongation1(% at break) 100 110
Electrolytic Corrosion Factor31.0 1.0
Adhesion to Steel130 oz/in (3,3N/10mm) 30 oz/in (3,3N/10mm)
UL 510 Flame Retardant2Yes Yes
Printable Yes Yes
Note: Typical properties are not recommended for specification purposes. Product specifications will be provided upon request.
Footnote: 1 Test Method ASTM D 1000
2 UL-recognized for flame retardancy per UL510, Product Category OANZ2, File E17385
3 3M Test Method-Available on request
Electrical Products Division
6801 River Place Blvd.
Austin, TX 78726-9000
http://www.3M.com/elpd/oem Litho in USA.
© 3M IPC 2000 78-8124-4751-0-B
IMPORTANT NOTICE
Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and
liability associated with such use.
Warranty; Limited Remedy; Limited Liability. This product will be free from defects in material and manufacture as of the date of
purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated
above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M
product. Except where prohibited by law, 3M will not be liable for any loss or damage arising from this 3M product, whether
direct, indirect, special, incidental or consequential regardless of the legal theory asserted.
3M is a trademark of 3M
