PTN Vishay Thin Film Commercial Thin Film Chip Resistors FEATURES Actual Size 1505 Lead (Pb)-free or Sn/Pb terminations available Pb-free Moisture resistant Available High purity alumina substrate RoHS* Non-standard values available COMPLIANT Will pass + 85 C, 85 % relative humidity and 10 % rated power 100 % visual inspected per MIL-PRF-55342 Very low noise and voltage coefficient (< - 30 dB) Non-inductive Laser-trimmed tolerances to 0.1 % Wraparound resistance less than 10 m Epoxy bondable termination available These chip resistors are available in both "top side" and "wraparound" termination styles in a variety of sizes. They incorporate self passivated, enhanced Tantalum Nitride films, to give superior performance on moisture resistance, voltage coefficient, power handling and resistance stability. The terminations consist of an adhesion layer, a leach resistant nickel barrier, and solder coating. This product will out-perform all requirements of characteristic H of MIL-PRF-55342. * * * * * * CONSTRUCTION TYPICAL PERFORMANCE Passivation Tantalum Nitride Resistive Film ABS Solder coating Nickel barrier TCR 25 TOL 0.1 High Purity Alumina Substrate Adhesion layer STANDARD ELECTRICAL SPECIFICATIONS TEST SPECIFICATIONS Material Absolute TCR 25 ppm/C, 50 ppm/C, 100 ppm/C - 55 C to + 125 C 1.0 %, 0.5 % and 0.1 % + 25 C Absolute Tolerance Operating Temperature Range - 55 C to + 125 C Noise CASE SIZE CONDITIONS Tantalum nitride < - 25 dB POWER RATING (mW) MAX. WORKING VOLTAGE RESISTANCE RANGE - () 0402 50 75 20 - 35K 0502 100 75 20 - 65K 0505 150 75 20 - 130K 0603 150 75 10 - 80K 0805 (1), 0705 (1) 200 100 10 - 301K 1005 250 100 10 - 301K 1010 500 150 50 - 600K 1206 400 200 10 - 1M 1505 400 150 10 - 1M 2208 750 150 10 - 1.75M 2010 800 200 10 - 2M 2512 1000 200 10 - 3M Note (1) 0705 and 0805 are the same (only use 0805 when ordering) * Pb containing terminations are not RoHS compliant, exemptions may apply Document Number: 60026 Revision: 23-Jan-09 For technical questions, contact: thin-film@vishay.com www.vishay.com 55 SURFACE MOUNT CHIPS * * * * * PTN Commercial Thin Film Chip Resistors Vishay Thin Film DIMENSIONS in inches D W T E L SURFACE MOUNT CHIPS CASE SIZE TERM L W T D E 0402 B 0.042 0.008 0.022 0.005 0.012 to 0.033 0.010 0.005 0.010 0.005 0502 B 0.055 0.006 0.025 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0505 B 0.055 0.006 0.050 0.005 0.012 to 0.033 0.010 0.005 0.015 0.005 0603 B 0.064 0.006 0.032 0.005 0.020 Max. 0.012 0.005 0.015 0.005 0805 (1), 0705 (1) B 0.080 0.006 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1005 B 0.105 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1010 B 0.105 0.007 0.100 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 1206 B 0.126 0.008 0.063 0.005 0.015 to 0.033 0.020 + 0.005, - 0.010 0.020 + 0.005, - 0.010 1505 B 0.155 0.007 0.050 0.005 0.015 to 0.033 0.015 0.005 0.015 0.005 2010 B 0.209 0.009 0.098 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2208 B 0.230 0.007 0.075 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 2512 B 0.259 0.009 0.124 0.005 0.015 to 0.033 0.020 0.005 0.020 0.005 ENVIRONMENTAL TESTS (VISHAY PERFORMANCE VS. MIL-PRF-55342 REQUIREMENTS) LIMITS MIL-PRF-55342 CHARACTERISTIC "H" TYPICAL VISHAY PERFORMANCE Resistance Temperature Characteristic 50 ppm/C 35 ppm/C Max. Ambient Temp. at Rated Wattage + 70 C + 70 C Max. Ambient Temp. at Power Derating + 150 C + 150 C ENVIRONMENTAL TEST Thermal Shock R 0.25 % 0.040 % Low Temperature Operation R 0.25 % 0.005 % Short Time Overload R 0.10 % 0.010 % High Temperature Exposure R 0.20 % 0.150 % Resistance to Bonding Exposure R 0.25 % 0.005 % Moisture Resistance R 0.40 % 0.029 % Life + 70 C at 1000 hours R 0.50 % 0.035 % Insulation Resistance 10 000 Minimum > 100 000 M Note (1) 0705 and 0805 are the same (only use 0805 when ordering) www.vishay.com 56 For technical questions, contact: thin-film@vishay.com Document Number: 60026 Revision: 23-Jan-09 PTN Commercial Thin Film Chip Resistors FILM LOAD LIFE STABILITY (at + 125 C) Vishay Thin Film DERATING CURVE 0.1 % Maximum Absolute Change 0.02 % 0.01 % 0.006 % 0.005 % 0.004 % 0.003 % 0.002 % 0.001 % 80 60 40 20 0 200 400 600 800 1000 1200 1400 1600 1800 2000 0 70 Time in h at + 125 C 125 150 Ambient Temperature C GLOBAL PART NUMBER INFORMATION New Global Part Numbering: PTN1206E1002BBT1 (preferred part number format) P T N 1 2 0 GLOBAL MODEL CASE SIZE TCR CHARACTERISTIC PTN 0402 0502 0505 0603 0805 1005 1010 1206 1505 2208 2010 2512 E = 25 ppm/C H = 50 ppm/C K = 100 ppm/C < 50 100 ppm/C best 6 E 1 0 0 2 B RESISTANCE TOLERANCE TERMINATION The first 3 digits are significant figures and the last digit specifies the number of zeros to follow. "R" designates the decimal point. B = 0.1 % D = 0.5 % F=1% G=2% J=5% B = Wraparound Sn/Pb solder 63 % Sn/ 37 % Pb w/ nickel barrier G = Wraparound Au over Ni (gold) termination epoxy bondable RoHS compliant - e4 S = Wraparound lead (Pb)-free solder 96.5 % Sn/3.0 %Ag/ 0.5 % Cu RoHS compliant - e1 Example: 10R0 = 10 1000 = 100 1001 = 1 k B T 1 PACKAGING BS = BULK 100 Min 1 Mult WS = WAFFLE 100 Min 1 Mult TAPE AND REEL T0 = 100 Min 100 Mult T1 = 1000 Min 1000 Mult T3 = 300 Min 300 Mult T5 = 500 Min 500 Mult TF = Full Reel TS = 100 Min 1 Mult Historical Part Number example: PTN0805H8801BBT PTN 0805 H 8801 B B T STYLE CASE SIZE TCR CHARACTERISTIC OHMIC VALUE TOLERANCE TERMINATION PACKAGING Document Number: 60026 Revision: 23-Jan-09 For technical questions, contact: thin-film@vishay.com www.vishay.com 57 SURFACE MOUNT CHIPS Percent of Rated Power 100 0.06 % 0.05 % 0.04 % 0.03 % Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1