NC7SZ14 TinyLogic UHS Inverter with Schmitt Trigger Input Description The NC7SZ14 is a single inverter with Schmitt trigger input from ON Semiconductor's Ultra-High Speed (UHS) series of TinyLogic. The device is fabricated w ith advanced CMOS technology to achieve ultra-high speed with high output drive while maintaining low static power dissipation over a very broad VCC operating range. The device is specified to operate over the 1.65 V to 5.5 V VCC range. The inputs and outputs are high-impedance when VCC is 0 V. Inputs tolerate voltages up to 5.5 V independent of VCC operating voltage. www.onsemi.com MARKING DIAGRAMS Features * * * * * * * * * * Pin 1 Ultra-High Speed: tPD 3.7 ns (Typical) into 50 pF at 5 V VCC High Output Drive: 24 mA at 3 V VCC Broad VCC Operating Range: 1.65 V to 5.5 V Matches Performance of LCX when Operated at 3.3 V VCC Power Down High Impedance Inputs / Outputs Over-Voltage Tolerance Inputs Facilitate 5 V to 3 V Translation Proprietary Noise / EMI Reduction Circuitry Ultra-Small MicroPakTM Packages Space-Saving SC-74A and SC-88A Packages These Devices are Pb-Free, Halogen Free/BFR Free and are RoHS Compliant 1 B6KK XYZ UDFN6 CASE 517DP Pin 1 SC-74A CASE 318BQ SC-88A CASE 419AC-01 IEEC / IEC A B6KK XYZ SIP6 CASE 127EB 7Z14T Z14T Y Figure 1. Logic Symbol B6, 7Z14, Z14 KK XY Z T = Specific Device Code = 2-Digit Lot Run Traceability Code = 2-Digit Date Code Format = Assembly Plant Code = Die Run Code = Year Coding Scheme = Plant Code Identifier = Eight-Week Datacoding Scheme ORDERING INFORMATION See detailed ordering, marking and shipping information in the package dimensions section on page 5 of this data sheet. (c) Semiconductor Components Industries, LLC, 1996 July, 2019 - Rev. 3 1 Publication Order Number: NC7SZ14/D NC7SZ14 Pin Configurations NC 1 5 NC 1 VCC A 2 A 2 GND 3 4 Y GND 3 Figure 2. SC-88A and SC-74A (Top View) 6 VCC 5 NC 4 Y Figure 3. MicroPak (Top Through View) PIN DEFINITIONS FUNCTION TABLE (Y = /A) Pin # SC-88A / SC74A Pin # MicroPak Name 1 1, 5 NC 2 2 A 3 3 GND Ground 4 4 Y Output 5 6 VCC Description No Connect Input Inputs Output A Y L H H L H = HIGH Logic Level L = LOW Logic Level Supply Voltage ABSOLUTE MAXIMUM RATINGS Symbol Parameter Min Max Unit VCC Supply Voltage -0.5 6.0 V VIN DC Input Voltage -0.5 6.0 V DC Output Voltage -0.5 6.0 V mA VOUT IIK IOK IOUT ICC or IGND TSTG DC Input Diode Current VIN < -0.5 V - -50 VIN > 6.0 V - +20 VOUT < -0.5 V - -50 VOUT > 6.0 V, VCC = GND - +20 DC Output Current - 50 mA DC VCC or Ground Current - 50 mA -65 +150 C DC Output Diode Current Storage Temperature Range mA TJ Junction Temperature Under Bias - +150 C TL Junction Lead Temperature (Soldering, 10 Seconds) - +260 C PD Power Dissipation in Still Air SC-74A - 225 mW SC-88A-5 - 190 MicroPak-6 - 327 MicroPak2TM-6 - 327 Human Body Model, JEDEC: JESD22-A114 - 4000 Charge Device Model, JEDEC: JESD22-C101 - 2000 ESD V Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. www.onsemi.com 2 NC7SZ14 RECOMMENDED OPERATING CONDITIONS Symbol VCC VIN VOUT Min Max Unit Supply Voltage Operating Parameter 1.65 5.50 V Supply Voltage Data Retention 1.5 5.5 Input Voltage 0 5.5 V Output Voltage 0 VCC V -40 +85 C SC-74A - 555 C/W SC-88A-5 - 659 MicroPak-6 - 382 MicroPak2-6 - 382 TA Operating Temperature qJA Thermal Resistance Conditions Functional operation above the stresses listed in the Recommended Operating Ranges is not implied. Extended exposure to stresses beyond the Recommended Operating Ranges limits may affect device reliability. 1. Unused inputs must be held HIGH or LOW. They may not float. DC ELECTICAL CHARACTERISTICS TA = +25C Min Typ Max Min Max Unit 1.65 - 1.00 1.40 - 1.40 V 1.80 - 1.10 1.50 - 1.50 2.30 - 1.40 1.80 - 1.80 3.00 - 1.75 2.20 - 2.20 4.50 - 2.45 3.10 - 3.10 5.50 - 2.90 3.60 - 3.60 1.65 0.20 0.50 - 0.20 - 1.80 0.25 0.55 - 0.25 - 2.30 0.40 0.75 - 0.40 - 3.00 0.60 1.00 - 0.60 - 4.50 1.00 1.43 - 1.00 - 5.50 1.20 1.70 - 1.20 - 1.65 0.10 0.48 0.90 0.10 0.90 1.80 0.15 0.54 1.00 0.15 1.00 2.30 0.25 0.65 1.10 0.25 1.10 3.00 0.40 0.77 1.20 0.40 1.20 4.50 0.60 1.01 1.50 0.60 1.50 5.50 0.70 1.18 1.70 0.70 1.70 Symbol Parameter VCC (V) VP Positive Threshold Voltage VN VH Negative Threshold Voltage Hysteresis Voltage TA = -40 to +85C Conditions www.onsemi.com 3 V V NC7SZ14 DC ELECTICAL CHARACTERISTICS (continued) TA = -40 to +85C TA = +25C Min Typ Max Min Max Unit 1.55 1.65 - 1.55 - V 1.70 1.80 - 1.70 - 2.30 2.20 2.30 - 2.20 - 3.00 2.90 3.00 - 2.90 - Symbol Parameter VCC (V) VOH HIGH Level Output Voltage 1.65 Conditions VIN = VIL, IOH = -100 mA 1.80 4.50 VOL LOW Level Output Voltage 4.40 4.50 - 4.40 - 1.65 IOH = -4 mA 1.29 1.52 - 1.29 - 2.30 IOH = -8 mA 1.90 2.15 - 1.90 - 3.00 IOH = -16 mA 2.40 2.80 - 2.40 - 3.00 IOH = -24 mA 2.30 2.68 - 2.30 - 4.50 IOH = -32 mA 3.80 4.20 - 3.80 - 1.65 VIN = VIH, IOL = 100 mA - 0.00 0.10 - 0.10 - 0.00 0.10 - 0.10 2.30 - 0.00 0.10 - 0.10 3.00 - 0.00 0.10 - 0.10 4.50 - 0.00 0.10 - 0.10 1.80 IIN Input Leakage Current IOFF Power Off Leakage Current ICC Quiescent Supply Current V 1.65 IOL = 4 mA - 0.08 0.24 - 0.24 2.30 IOL = 8 mA - 0.10 0.30 - 0.30 3.00 IOL = 16 mA - 0.15 0.40 - 0.40 3.00 IOL = 24 mA - 0.22 0.55 - 0.55 4.50 IOL = 32 mA - 0.22 0.55 - 0.55 VIN = 5.5 V, GND - - 0.1 - 1.0 mA VIN or VOUT = 5.5 V - - 1 - 10 mA VIN = 5.5 V, GND - - 1.0 - 10 mA 1.65 to 5.5 0 1.65 to 5.50 AC ELECTRICAL CHARACTERISTICS TA = +25C Symbol tPLH, tPHL Parameter Propagation Delay (Figure 4, 5) VCC (V) Conditions CL = 15 pF, RL = 1 MW 1.65 1.80 TA = -40 to +85C Min Typ Max Min Max Unit - 9.1 15.0 - 15.6 ns - 7.6 12.5 - 13.0 2.50 0.20 - 5.0 9.0 - 9.5 3.30 0.30 - 3.7 6.3 - 6.5 5.00 0.50 - 3.1 5.2 - 5.5 - 4.4 7.2 - 7.5 - 3.7 5.9 - 6.2 3.30 0.30 5.00 0.50 CL = 50 pF, RL = 500 W CIN Input Capacitance 0.00 - 4 - - - pF CPD Power Dissipation Capacitance (Note 2) (Figure 6) 3.30 - 24 - - - pF 5.00 - 30 - - - 2. CPD is defined as the value of the internal equivalent capacitance which is derived from dynamic operating current consumption (ICCD) at no output loading and operating at 50% duty cycle. CPD is related to ICCD dynamic operating current by the expression: ICCD = (CPD) (VCC) (fIN) + (ICCstatic). www.onsemi.com 4 NC7SZ14 tr = 3 ns tf = 3 ns 90% VCC 50% INPUT INPUT 10% OUTPUT CL 90% RL 50% OUTPUT 10% TW tPLH NOTE: 4. CL includes load and stray capacitance; Input PRR = 1.0 MHz; tW = 500 ns VCC tPHL 50% GND VOH 50% VOL Figure 4. AC Test Circuit Figure 5. AC Waveforms VCC A INPUT NOTE: 3. Input = AC Waveform; tr = tf = 1.8 ns; PRR = 10 MHz; Duty Cycle = 50%. Figure 6. ICCD Test Circuit ORDERING INFORMATION Top Mark Operating Temperature Packages Shipping NC7SZ14M5X 7Z14 -40 to +85C SC-74A 3000 / Tape & Reel Part Number NC7SZ14P5X Z14 -40 to +85C SC-88A 3000 / Tape & Reel NC7SZ14L6X B6 -40 to +85C MicroPak 5000 / Tape & Reel NC7SZ14FHX B6 -40 to +85C MicroPak2 5000 / Tape & Reel For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NC7SZ14 PACKAGE DIMENSIONS SIP6 1.45X1.0 CASE 127EB ISSUE O www.onsemi.com 6 NC7SZ14 PACKAGE DIMENSIONS SC-74A CASE 318BQ ISSUE B 5X b 0.20 C A B E1 5 M 4 1 2 E 3 B 0.05 A1 e D A L DETAIL A TOP VIEW A SIDE VIEW DETAIL A C c SEATING PLANE END VIEW RECOMMENDED SOLDERING FOOTPRINT* 0.95 PITCH 2.40 5X 1.00 5X 0.70 DIMENSIONS: MILLIMETERS *For additional information on our Pb-Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 7 NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH THICKNESS. MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF BASE MATERIAL. 4. DIMENSIONS A AND B DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS. MOLD FLASH, PROTRUSIONS, OR GATE BURRS SHALL NOT EXCEED 0.15 PER SIDE. DIM A A1 b c D E E1 e L M MILLIMETERS MIN MAX 0.90 1.10 0.01 0.10 0.25 0.50 0.10 0.26 2.85 3.15 2.50 3.00 1.35 1.65 0.95 BSC 0.20 0.60 0_ 10 _ NC7SZ14 PACKAGE DIMENSIONS SC-88A (SC-70 5 Lead), 1.25x2 CASE 419AC-01 ISSUE A SYMBOL MIN A 0.80 D e e E1 E MAX 1.10 A1 0.00 0.10 A2 0.80 1.00 b 0.15 0.30 c 0.10 0.18 D 1.80 2.00 2.20 E 1.80 2.10 2.40 E1 1.15 1.25 1.35 0.65 BSC e 0.26 L L1 0.36 0.46 0.42 REF 0.15 BSC L2 TOP VIEW NOM 0 8 1 4 10 q1 A2 A q q1 b L L1 A1 SIDE VIEW c END VIEW Notes: (1) All dimensions are in millimeters. Angles in degrees. (2) Complies with JEDEC MO-203. www.onsemi.com 8 L2 NC7SZ14 PACKAGE DIMENSIONS UDFN6 1.0X1.0, 0.35P CASE 517DP ISSUE O www.onsemi.com 9 NC7SZ14 MicroPak and MicroPak2 are trademarks of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries. ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of ON Semiconductor's product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent-Marking.pdf. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. "Typical" parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 www.onsemi.com 10 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NC7SZ14/D