The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. Staggered Connector Directly Mounted on Board HIF2C Series Features 1. Directly Mounted on Board This connector can be directly mounted on the board using 1.27mm pitch flat cable. 2. Variation in Number of Contacts The number of contacts contains 10, 16, 20, 26, 30, 34, 40, 50, and 60 contacts. 3. Low Profile Type The connector height is lower than that of the HIF2E series. 4. Applicable Cable The applicable cable is UL2651 AWG#28 flat cable (7 cores./0.127mm, jacket dia. :0.8 to 1.0mm). Applications Computers, terminal equipment, PPC, various kinds of electronic equipment, business machines, etc. Product Specifications Rating Current rating: 1A Voltage rating: 200V AC Item Operating Temperature Range:-55 to +85c (Note 1) Operating Moisture Range:40 to 80% Storage Temperature Range:-10 to +60c(Note 2) Storage Humidity Range:40 to 70% (Note 2) Specification Condition 1. Insulation Resistance 1000M ohms min. 500V DC 2. Withstanding voltage No flashover or insulation breakdown. 650V AC/1 minute 3. Contact Resistance 15m ohms max. 0.1A 4. Vibration Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. No electrical discontinuity of 1s or more 5. Humidity (Steady state) Insulation resistance: 1000M ohms min. 96 hours at temperature of 40c and humidity of 90% to 95% 6. Temperature Cycle No damage, cracks, or parts looseness. (-65c: 30 minutes 15 to 35c: 5 minutes max. 125c: 30 minutes 15 to 35c: 5 minutes max.) 5 cycles 7. Resistance to Solder Bath: 260c for 10 seconds Soldering heat No deformation of components affecting performance. Manual soldering: 360c for 5 seconds Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note 3. Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. Material Part Material Insulator Contact PBT Beryllium copper Contact area Finish Remarks Black Gold plated over nickel underplated UL94V-0 --------------- Ordering Information HIF2C - * DT - 1.27 R 1 2 3 4 5 1 Series Name: HIF 2C 4 Contact Pitch: 1.27mm 2 Number of contacts: 10, 16, 20, 26, 30, 34, 40, 50, and 60 5 Connection type : R : ribbon cable 3 Contact alignment: DT : staggered B65 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesStaggered have been discontinued, orConnector will be discontinued soon. Please check theon products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF2C Directly Mounted Board Part Number B66 CL No. Number of Contacts A B HIF2C-10DT-1.27R(01) 561-0075-0-01 10 17.8 11.43 HIF2C-16DT-1.27R(01) 561-0077-6-01 16 25.4 19.05 HIF2C-20DT-1.27R(01) 561-0079-1-01 20 30.5 24.13 HIF2C-26DT-1.27R(01) 561-0081-3-01 26 38.1 31.75 HIF2C-30DT-1.27R(01) 561-0083-9-01 30 43.2 36.83 HIF2C-34DT-1.27R(01) 561-0085-4-01 34 48.3 41.91 HIF2C-40DT-1.27R(01) 561-0087-0-01 40 55.9 49.53 HIF2C-50DT-1.27R(01) 561-0089-5-01 50 68.6 62.23 HIF2C-60DT-1.27R(01) 561-0091-7-01 60 81.3 74.93 RoHS YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose websiteSeriesStaggered RoHS search at www.hirose-connectors.com, or contact your Hirose sales HIF2C Connector Directly Mounted on representative. Board BPCB mounting pattern 10 contacts 16 contacts 20 contacts 26 contacts 30 contacts B67 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS productsSeriesStaggered have been discontinued, orConnector will be discontinued soon. Please check theon products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative. HIF2C Directly Mounted Board BPCB mounting pattern 34 contacts 40 contacts 50 contacts 60 contacts B68