3. 8.3ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25oC ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load,
For capacitive load, derate current by 20%.
5KP5.0
THRU
5KP180CA
R-6
Dimensions in inches and (millimeters)
DEVICES FOR BIPOLAR APPLICATIONS
For Bidirectional use C or CA suffix (e.g. 5KP5.0C, 5KP180CA).
Electrical characteristics apply in both directions
NOTES :
2. Mounted on Copper Leaf area of 0.8 X 0.8*( 20 X 20mm ) per Fig. 5
1. Non-repetitive current pulse, per Fig.3 and derated above T
A
= 25
o
C per Fig.2.
T
J
, T
STG
-55 to + 175
0
C
Operating and Storage Temperature Range
Peak Forward Surge Current, 8.3ms single half sine-wave
superimposed on rated load( JEDEC Method ) (Note 3)
Steady State Power Dissipation at T
L
= 75
o
C
Lead Lengths
.375"(9.5mm) ( Note 2)
SYMBOL
P
M(AV)
I
FSM
Amps
UNITS
Maximum Instantaneous Forward Voltage at 100A
for Unidirectional
Only
Watts
Peak Pulse Power Dissipation on 10/1000 µs waveform
(Note1,FIG.1) Minimum 5000
8.0
400
VALUE
P
PPM
Watts
V
F
3.5 Volts
RECTIFIER SPECIALISTS
R
DC COMPONENTS CO., LTD.
VOLTAGE RANGE - 5.0 to 180 Volts
PEAK PULSE POWER - 5000 Watts
TECHNICAL SPECIFICATIONS OF
TRANSIENT VOLTAGE SUPPRESSOR
FEATURES
* Glass passivated junction
* 5000 Watts Peak Pulse Power capability on
10/1000 µs waveform
* Excellent clamping capability
* Low zener impedance
* Fast response time
MECHANICAL DATA
* Case: Molded plastic
* Epoxy: UL 94V-0 rate flame retardant
* Lead: MIL-STD-202E, Method 208 guaranteed
* Polarity: Color band denotes positive end (cathode)
except bidirectional types
* Mounting position: Any
* Weight: 2.1 gram
180
NEXT
BACK
EXIT
NEXT
BACK
EXIT
NEXT
BACK
EXIT
R
DC COMPONENTS CO., LTD.
5KP (5000W) SERIES TRANSIENT VOLTAGE SUPPRESSORS
1.VBR measured after IT applied for 300µs. IT = Square Wave Pulse or equivalent.
2.For bidirectonal use C or CA suffixs for all types (ex. 5KP5.0C, 5KP180CA).
electrical characteristics apply in both directions.
3.For bidirectional types having VWM of 10 volts and less, the ID limit is doubled.
NOTES :
5KP36 40.0 48.9 5.0 36.0 10 78 64.3
5KP36A 40.0 44.2 5.0 36.0 10 86 58.1
5KP40 44.4 54.3 5.0 40.0 10 70 71.4
5KP40A 44.4 49.1 5.0 40.0 10 78 64.5
5KP43 47.8 58.4 5.0 43.0 10 65 76.7
5KP43A 47.8 52.8 5.0 43.0 10 62 80.3
5KP45 50.0 61.1 5.0 45.0 10 62 80.3
5KP45A 50.0 55.3 5.0 45.0 10 69 72.7
5KP48 53.3 65.2 5.0 48.0 10 58 85.5
5KP48A 53.3 58.9 5.0 48.0 10 65 77.4
5KP51 56.7 69.3 5.0 51.0 10 55 91.1
5KP51A 56.7 62.7 5.0 51.0 10 61 82.4
5KP54 60.0 73.3 5.0 54.0 10 52 96.3
5KP54A 60.0 66.3 5.0 54.0 10 49 87.1
5KP58 64.4 66.3 5.0 58.0 10 49 103
5KKP58A 64.4 71.2 5.0 58.0 10 53 93.6
5KP60 66.7 81.5 5.0 60.0 10 47 107
5KP60A 66.7 73.7 5.0 60.0 10 52 96.8
5KP64 71.1 86.9 5.0 64.0 10 44 114
5KP64A 71.1 78.6 5.0 64.0 10 49 103
5KP70 77.8 95.1 5.0 70.0 10 40 125
5KP70A 77.8 86.0 5.0 70.0 10 44 113
5KP75 83.3 102 5.0 75.0 10 37 134
5KP75A 83.3 92.1 5.0 75.0 10 41 121
5KP78 86.7 106 5.0 78.0 10 36 139
5KP78A 86.7 95.8 5.0 78.0 10 40 126
5KP85 94.4 115 5.0 85.0 10 33 151
5KP85A 94.4 104 5.0 85.0 10 36 137
5KP90 100 122 5.0 90.0 10 31 160
5KP90A 100 111 5.0 90.0 10 34 146
5KP100 111 136 5.0 100 10 28 179
5KP100A 111 123 5.0 100 10 31 162
5KP110 122 149 5.0 110 10 26 196
5KP110A 122 135 5.0 110 10 28 177
5KP120 133 163 5.0 120 10 23 215
5KP120A 133 148 5.0 120 10 26 194
5KP150 166 204 5.0 150 10 19 269
5KP150A 166 186 5.0 150 10 21 242
5KP160 178 217 5.0 160 10 17 285
5KP160A 178 196 5.0 160 10 19 285
5KP170 189 230 5.0 170 10 17 302
5KP170A 189 208 5.0 170 10 18 273
5KP180 200 245 5.0 180 10 16 322
5KP180A 200 222 5.0 180 10 17 292
183
NEXT
BACK
EXIT
NEXT
BACK
EXIT
