74LVC2G04GW,125 - NXP Semiconductors

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 1 of 11

www.diodes.com July 2011

NEW PRODUCT

Description

The 74LVC2G04 is a dual inverter gate with standard push-

pull outputs. The device is designed for operation with a

power supply range of 1.65V to 5.5V. The inputs are tolerant

to 5.5V allowing this device to be used in a mixed voltage

environment. The device is fully specified for partial power

down applications using IOFF. The IOFF circuitry disables the

output preventing damaging current backflow when the

device is powered down.

The gate performs the positive Boolean function:

AY =

Pin Assignments

Features

• Wide Supply Voltage Range from 1.65V to 5.5V

• ±24mA Output Drive at 3.0V

• CMOS low power consumption

• IOFF Supports Partial-Power-Down Mode Operation

• Inputs accept up to 5.5V

• ESD Protection Tested per JESD 22

o Exceeds 200-V Machine Mod el (A11 5-A)

o Exceeds 2000-V Human Body Model (A114-A)

o Exceeds 1000-V Charged Device Model (C101)

• Latch-Up Exceeds 100mA per JESD 78, Class II

• Range of Package Options

• SOT26, SOT363, DFN1410, and DFN1010 Available in

“Green” Molding Compound (no Br, Sb)

• Lead Free Finish/ RoHS Com pliant (Note 1)

Applications

• Voltage Level Shifting

• General Purpose Logic

• Power Down Signal Isolation

• Wide array of products such as:

o PCs, networking, notebooks, netbooks, PDAs

o Computer peripherals, hard drives, CD/DVD ROM

o TV, DVD, DVR, set top box

o Cell Phones, Personal Navigation / GPS

o MP3 players ,Cameras, Video Recorders

Notes: 1. EU Directive 2002/95/EC (RoHS). All applicable RoHS exemptions applied. Please visit our website at

http://www.diodes.com/products/lead_free.html.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 2 of 11

www.diodes.com July 2011

NEW PRODUCT

Pin Descriptions

Pin Name Pin NO. Description

1A 1 Data Input

GND 2 Ground

2A 3 Data Input

2Y 4 Data Output

VCC 5 Supply Voltage

1Y 6 Data Output

Logic Diagram

161Y

1A

342Y

2A

Function Table

Inputs Output

A Y

H L

L H

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 3 of 11

www.diodes.com July 2011

NEW PRODUCT

Absolute Maximum Ratings (Note 2)

Symbol Description Rating Unit

ESD HBM ESD Human Body Model ESD Protection 2 KV

ESD CDM Charged Device Model ESD Protection 1 KV

ESD MM Machine Model ESD Protection 200 V

VCC Supply Voltage Range -0.5 to 6.5 V

VI Input Voltage Range -0.5 to 6.5 V

VO Voltage applied to output in high impedance or IOFF state -0.5 to 6.5 V

VO Voltage applied to output in high or low state. -0.3 to VCC +0.5 V

IIK Input Clamp Current VI<0 -50 mA

IOK Output Clamp Current -50 mA

IO Continuous output current ±50 mA

Continuous current through Vdd or GND ±100 mA

TJ Operating Junction Temperature -40 to 150 °C

TSTG Storage Temperature -65 to 150 °C

Notes: 2. Stresses beyond the absolute maximum may result in immediate failure or reduced reliability . These a re stress values and device operation should

be within recommend values.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 4 of 11

www.diodes.com July 2011

NEW PRODUCT

Recommended Operating Conditions (Note 3)

Symbol Parameter Min Max Unit

VCC Operating Voltage Operating 1.65 5.5 V

Data retention only 1.5 V

VIH High-level Input Voltage

VCC = 1.65V to 1.95V 0.65 X VCC

V

VCC = 2.3V to 2.7V 1.7

VCC = 3V to 3.6V 2

VCC = 4.5V to 5.5V 0.7 X VCC

VIL Low-level input voltage

VCC = 1.65V to 1.95V 0.35 X VCC

V

VCC = 2.3V to 2.7V 0.7

VCC = 3V to 3.6V 0.8

VCC = 4.5V to 5.5V 0.3 X VCC

VI Input Voltage 0 5.5 V

VO Output Voltage 0 VCC V

IOH High-level outp ut current

VCC = 1.65V -4

mA

VCC = 2.3V -8

VCC = 3V -16

-24

VCC = 4.5V -32

IOL Low-level output current

VCC = 1.65V 4

mA

VCC = 2.3V 8

VCC = 3V 16

24

VCC = 4.5V 32

Δt/ΔV Input transition rise or fall rate VCC = 1.8V ± 0.15V, 2.5V ± 0.2V 20

ns/V

VCC = 3.3V ± 0.3V 10

VCC = 5V ± 0.5V 5

TA Operating free-air temperature -40 125 ºC

Notes: 3. Unused inputs should be held at VCC or Ground.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 5 of 11

www.diodes.com July 2011

NEW PRODUCT

Electrical Characteristics

Symbol Parameter Test Conditions VCC 40ºC to 85ºC -40ºC to 125ºC

Min Max Min Max Unit

VOH High Level Output

Voltage

IOH = -100μA 1.65V to 5.5V VCC – 0.1 VCC – 0.1

V

IOH = -4mA 1.65V 1.2 0.95

IOH = -8mA 2.3V 1.9 1.7

IOH = -16mA 3V 2.4 1.9

IOH = -24mA 2.3 2.0

IOH = -32mA 4.5V 3.8 3.4

VOL Low Level Output

Voltage

IOL = 100μA 1.65V to 5.5V 0.1 0.1

V

IOL = 4mA 1.65V 0.45

0.70

IOL = 8mA 2.3V 0.3

0.45

IOL = 16mA 3V 0.4 0.60

IOL = 24mA 0.55 0.80

IOL = 32mA 4.5V 0.55

0.80

II Input Current VI = 5.5 V or GND 0 to 5.5V ± 5 ± 20 μA

IOFF Power Down Leakage

Current VI or VO = 5.5V 0 ± 10

± 20 μA

ICC Supply Current VI = 5.5V of GND

IO=0 1.65V to 5.5V 10 40 μA

ΔICC Additional Supply

Current Input at VCC –0.6V 3 V to 5.5V 500 5000 μA

Package Characteristics (All typical values are at VCC = 3.3V, TA = 25°C)

Symbol Parameter Test Conditions VCC Min Typ. Max Unit

CI Input Capacitance VI = VCC – or GND 3.3

3.5 pF

θJA Thermal Resistance

Junction-to-Ambient

SOT26

(Note 4)

204

oC/W

SOT363 371

DFN1410 430

DFN1010 510

θJC Thermal Resistance

Junction-to-Case

SOT26

(Note 4)

52

oC/W

SOT363 143

DFN1410

190

DFN1010

250

Notes: 4. Test condition for SOT26, SOT363, DFN1410 and DFN1010 : Device mounted on FR-4 substrate PC board, 2oz copper, with minimum

recommended pad layout.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 6 of 11

www.diodes.com July 2011

NEW PRODUCT

Switching Characteristics

TA= -40°C to 85°C, CL = 30 or 50pF (see Figure 1)

Parameter From

(Input) TO

(OUTPUT)

VCC = 1.8 V

± 0.15V VCC = 2.5V

± 0.2V VCC = 3.3V

± 0.3V VCC = 5V

± 0.5V Unit

Min Max Min Max Min Max Min Max

tpd A Y 0.5 8.0

1.0 4.4 0.5 4.1 0.5 3.2 ns

TA= -40°C to 125°C, CL = 30 or 50pF (see Figure 1)

Parameter From

(Input) TO

(OUTPUT)

VCC = 1.8V

± 0.15V VCC = 2.5V

± 0.2V VCC = 3.3V

± 0.3V VCC = 5V

± 0.5V Unit

Min Max Min Max Min Max Min Max

tpd A Y 0.5 9.5

0.5 5.4 0.5 5.5 0.5 3.8 ns

Operating Characteristics

TA = 25 ºC

Parameter Test

Conditions VCC = 1.8V VCC = 2.5V VCC = 3.3V VCC = 5V Unit

Typ. Typ. Typ. Typ.

Cpd Power dissipation

capacitance f = 10 MHz 17 19 20 21 pF

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 7 of 11

www.diodes.com July 2011

NEW PRODUCT

Parameter Measurement Information

VCC Inputs VM CL RL

VI tr/tf

1.8V±0.15V VCC ≤2ns VCC/2 30 pF 1 KΩ

2.5V±0.2V VCC ≤2ns VCC/2 30 pF 500 Ω

3.3V±0.3V 3V ≤2.5ns 1.5 V 50 pF 500 Ω

5V±0.5V VCC ≤2.5ns VCC/2 50 pF 500 Ω

Voltage Waveform Pulse Duration

Voltage Waveform Propagation Delay Times

Inverting and Non Inverting Outputs

Figure 1. Load Circuit and Voltage Waveforms

Notes: A. Includes test lead and test apparatus capacitance.

B. All pulses are supplied at pulse repetition rate ≤ 10 MHz.

C. Inputs are measured separately one transition per measurement.

D. tPLH and tPHL are the same as tPD.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 8 of 11

www.diodes.com July 2011

NEW PRODUCT

Ordering Information

Device Package

Code Packaging

(Note 5) 7” Tape and Reel

Quantity Part Number Suffix

74LVC2G04W6-7 W 6 SOT26 3000/Tape & Reel -7

74LVC2G04DW- 7 DW SOT363 3000/Tape & Reel -7

74LVC2G04FW4-7 FW4 DFN1010 5000/Tape & Reel -7

74LVC2G04FZ4-7 FZ4 DFN1410 5000/Tape & Reel -7

Notes: 5. Pad layout as shown on Diodes Inc. suggested pad layout document AP02001, which can be found on our website at

http://www.diodes.com/datasheets/ap02001.pdf.

6. The taping orientation is located on our website at http://www.diodes.com/datasheets/ap02007.pdf

Marking Information

(1) SOT26, SOT363

Part Number Package Identification Code

74LVC2G04W6 SOT26 Z2

74LVC2G04DW SOT363 Z2

(2) DFN1010, DFN1410

Part Number Package Identification Code

74LVC2G04FW4 DFN1010 Z2

74LVC2G04FZ4 DFN1410 Z2

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 9 of 11

www.diodes.com July 2011

NEW PRODUCT

Package Outline Dimensions (All Dimensions in mm)

(1) Package Type: SOT26

(2) Package Type: SOT363

C

L

C

L

0.10/0.30

1.15/1.35

2.0/2.2

0.65Bsc.

1.8/2.2

0/0.1 0.9/1.0

1.10Max.

0.1/0.22

"A"

Detail"A" Gauge Plane

0.25/0.40

C

L

C

L

1.9

C

L

6x-0.60

6x-0.42

4x-0.65

0.40/0.45 Land Pattern Recommendation

(unit:mm)

0.25

0°/8°

PIN 1

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 10 of 11

www.diodes.com July 2011

NEW PRODUCT

Package Outline Dimensions (All Dimensions in mm)

(3) Package Type: DFN1010

Bottom View

Side View

0.40Max.

0/0.05

0.13Typ.

6x-

0.05 C

0.08 C

C

Seating Plan e

A

0.95/1.05

0.07Typ.

0.08 C

2x- 0.14/0.20(6x)

0.35Typ.

2X-

B

0.08 C

0.07 CAB

Pin1

Top View

Land Pattern R ecommendation

(unit:mm)

0.35/0.45(6x)

0.15Min.

0.05/0.15

Pin1

0.35Typ.

0.20(6x)

0.45(6x)

0.235

0.15Min.

0.15

(4) Package Type DFN1410

Bottom View

Side View

1.35/1.45

0.95/1.05

0.50Typ.

6x-0.25/0.35

0.40Max.

0.13Typ.

(Pin #1 ID)

0.10 C

0.08 C Seating Plane

A

B

C

0.10 CAB

0.25 A

2X- 0.25 B

2X-

0.10(4x)

6x-

0/0.05

6x-0.15/0.25

0.075¡ Ó0.030

C0.1x45¢X

Top View

(mm)

Land Pattern Recommendation

6x-0.35

0.550

6x-0.25

4x-0.50Typ.

74LVC2G04

DUAL INVERTER GATE

74LVC2G04.

Document number: DS35160 Rev 4- 2 11 of 11

www.diodes.com July 2011

NEW PRODUCT

IMPORT ANT NOTI CE

DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS

DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A

PARTICULAR PURPOSE (A ND THEIR EQUIVA LENT S UNDE R THE LAWS OF ANY JURISDICTION).

Diodes Incorporat ed and its subsidiaries reserve the right to make modificatio ns, enhancements, improvements , corrections or other

changes without furt her notice to this document and any product descri bed herein. Diodes Inc orporated does not assume any liability

arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any

license under its patent or trademark rights, nor t he rights of others. Any Custom er or us er of this document or products described

herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies

whose products are repres ented on Diodes Incorporated website, harmless against all damages.

Diodes Incorporat ed does not warrant or acc ept any liabil ity whatsoever in re spect of any product s purchased through unauthorized

sales c hannel.

Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall

indemnify and hold Diodes Incorporated and its representatives harml ess against all claims, damages, expenses, and attorney fees

arising out of, directly or indirectly, any c l aim of personal inj ury or death ass ociated with such unintended or unauthorized application.

Products desc ribed herein may be covered by one or more Unit ed States, int ernational or foreign patents pending. Product names

and markings noted herein may also be covered by one or more United States, international or foreign trademarks.

LIFE SUPPORT

Diodes Incorporat ed products are specifical ly not authorized for use as critical components in life support devices or systems without

the express written app roval of t he Chief Executive Off icer of Diodes Incorporated. As used herein:

A. Life support device s or syst ems are devices or systems which:

1. are intended to impl ant into the body, or

2. support or sustain life and whose failure to perform when properly used in accordance with i nst ructions for use provided

in the labeling can be reasonably expected to result in significant injury t o t he user.

B. A critical componen t is any component in a life support device or system whose failure t o perform can be reasonably expected

to cause the failure of t he life support devi ce or to affect its safety or effecti veness.

Customers represent t hat they have all necessary expertise in the safety and regulatory ramifications of their life support devices or

systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements

concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems,

notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further,

Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes

Incorporat ed products in such safety-cri t ic al, l ife support devices or systems.

www.diodes.com