LM1458/LM1558 Dual Operational Amplifier General Description Features The LM1458 and the LM1558 are general purpose dual operational amplifiers. The two amplifiers share a common bias network and power supply leads. Otherwise, their operation is completely independent. The LM1458 is identical to the LM1558 except that the LM1458 has its specifications guaranteed over the temperature range from 0C to +70C instead of -55C to +125C. n n n n n n Connection Diagrams No frequency compensation required Short-circuit protection Wide common-mode and differential voltage ranges Low-power consumption 8-lead can and 8-lead mini DIP No latch up when input common mode range is exceeded Dual-In-Line Package Metal Can Package DS007886-2 Top View Order Number LM1558H, LM1558H/883 or LM1458H See NS Package Number H08C (c) 2000 National Semiconductor Corporation DS007886 DS007886-3 Top View Order Number LM1558J/883, LM1458M, LM1458MX or LM1458N See NS Package Number J08A, M08A or N08E www.national.com LM1458/LM1558 Dual Operational Amplifier August 2000 LM1458/LM1558 Absolute Maximum Ratings (Note 1) Operating Temperature Range LM1558 -55C to +125C LM1458 0C to +70C Storage Temperature Range -65C to +150C Lead Temperature (Soldering, 10 sec.) 260C Soldering Information Dual-In-Line Package Soldering (10 seconds) 260C Small Outline Package Vapor Phase (60 seconds) 215C Infrared (15 seconds) 220C See AN-450 "Surface Mounting Methods and Their Effect on Product Reliability" for other methods of soldering surface mount devices. ESD tolerance (Note 6) 300V If Military/Aerospace specified devices are required, please contact the National Semiconductor Sales Office/ Distributors for availability and specifications. (Note 5) Supply Voltage LM1558 LM1458 Power Dissipation (Note 2) LM1558H/LM1458H LM1458N Differential Input Voltage Input Voltage (Note 3) Output Short-Circuit Duration 22V 18V 500 mW 400 mW 30V 15V Continuous Electrical Characteristics (Note 4) Parameter Conditions LM1558 Min Input Offset Voltage TA = 25C, RS 10 k LM1458 Typ Max 1.0 5.0 Min Units Typ Max 1.0 6.0 mV nA Input Offset Current TA = 25C 80 200 80 200 Input Bias Current TA = 25C 200 500 200 500 Input Resistance TA = 25C Supply Current Both TA = 25C, VS = 15V 0.3 1.0 3.0 0.3 5.0 1.0 3.0 nA M 5.6 mA Amplifiers Large Signal Voltage Gain TA = 25C, VS = 15V 50 160 20 160 V/mV VOUT = 10V, RL 2 k Input Offset Voltage RS 10 k 6.0 7.5 mV Input Offset Current 500 300 nA Input Bias Current 1.5 0.8 Large Signal Voltage Gain VS = 15V, VOUT = 10V 25 15 A V/mV RL k 14 13 V Input Voltage Range 12 10 12 14 13 VS = 15V 12 10 12 Common Mode RS 10 k 70 90 70 90 dB RS 10 k 77 96 77 96 dB Output Voltage Swing VS = 15V, RL = 10 k RL = 2 k V V Rejection Ratio Supply Voltage Rejection Ratio Note 1: "Absolute Maximum Ratings" indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is functional, but do not guarantee specific performance limits. Note 2: The maximum junction temperature of the LM1558 is 150C, while that of the LM1458 is 100C. For operating at elevated temperatures, devices in the H08 package must be derated based on a thermal resistance of 150C/W, junction to ambient or 20C/W, junction to case. For the DIP the device must be derated based on a thermal resistance of 187C/W, junction to ambient. Note 3: For supply voltages less than 15V, the absolute maximum input voltage is equal to the supply voltage. Note 4: These specifications apply for VS = 15V and -55C TA 125C, unless otherwise specified. With the LM1458, however, all specifications are limited to 0C TA 70C and VS = 15V. Note 5: Refer to RETS 1558V for LM1558J and LM1558H military specifications. Note 6: Human body model, 1.5 k in series with 100 pF. www.national.com 2 LM1458/LM1558 Schematic Diagram DS007886-1 Numbers in parentheses are pin numbers for amplifier B. 3 www.national.com LM1458/LM1558 Physical Dimensions inches (millimeters) unless otherwise noted Metal Can Package (H) Order Number LM1558H, LM1558H/883 or LM1458H NS Package Number H08C Small Outline Package (M) Order Number LM1458M or LM1458MX NS Package Number M08A www.national.com 4 LM1458/LM1558 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Small Outline Package (M) Order Number LM1458M or LM1458MX NS Package Number M08A Molded Dual-In-Line Package (N) Order Number LM1458N NS Package Number N08E 5 www.national.com LM1458/LM1558 Dual Operational Amplifier Notes LIFE SUPPORT POLICY NATIONAL'S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT AND GENERAL COUNSEL OF NATIONAL SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. National Semiconductor Corporation Americas Tel: 1-800-272-9959 Fax: 1-800-737-7018 Email: support@nsc.com www.national.com National Semiconductor Europe Fax: +49 (0) 180-530 85 86 Email: europe.support@nsc.com Deutsch Tel: +49 (0) 69 9508 6208 English Tel: +44 (0) 870 24 0 2171 Francais Tel: +33 (0) 1 41 91 8790 2. A critical component is any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. National Semiconductor Asia Pacific Customer Response Group Tel: 65-2544466 Fax: 65-2504466 Email: ap.support@nsc.com National Semiconductor Japan Ltd. Tel: 81-3-5639-7560 Fax: 81-3-5639-7507 National does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and National reserves the right at any time without notice to change said circuitry and specifications.