GENERAL PURPOSE PLASTIC SILICON RECTIFIER EM513 - EM518
DO-41P
Axial Plastic Package
ABSOLUTE MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTIC
S
(Ratings at Ta = 25oC unless specified otherwise, single phase, half wave, 60Hz, resistive
or inductive load. For ca
p
acitive load, derate current b
y
20%
)
Symbols EM513 EM516 EM518 Units
VRRM 1600 1800 2000 Volts
VRMS 1120 1260 1400 Volts
VDC 1600 1800 2000 Volts
I(AV) Amp
IFSM Amp
VFVolts
IRµAmp
CjpF
RӨJA ºC/W
Tj ºC
Tstg ºC
NOTES:
1. Measured at 1 MHZ and applied reverse voltage of 4.0 VDC.
2. Thermal resistance from Junction to Ambient 0.375" (9.5mm) lead length PCB Mounted
EM51_8Rev310506D
Storage Temperature Range
Operating Junction Temperature Range
-55 to +150
-55 to +150
Typical Thermal Resistance (Note 2)
Typical Junction Capacitance (Note 1)
50
15
Maximum Reverse Current at Rated DC Blocking Voltage T
A=25°C
TA=100ºC
Maximum Forward Voltage at 1.0A and 25ºC
5.0
500
1.1
Peak Forward Surge Current, 8.3ms single half-sine-wave superimposed
on rated load (JEDEC method)
Maximum Average Forward Rectified Current 0.375" (9.5mm) Lead Length
at TL=75ºC
30
1.0
Maximum DC Blocking Voltage
Maximum RMS Voltage
Maximum Peak repetitive reverse voltage
Description
Continental Device India Limited Data Sheet Page 1 of 5
Continental Device India Limited
An ISO/TS 16949, ISO 9001 and ISO 14001 Certified Company
EM513 - EM518
DO-41P
Axial Plastic Package
DIM Min Max
A 25.40
B 4.20 5.20
C 0.70 0.90
D 2.00 2.70
EM51_8Rev310506D
All Dimensions are in mm
DO-41P Axial Plastic Package
Continental Device India Limited Data Sheet Page 2 of 5
EM513 - EM518
DO-41P
Axial Plastic Package
All Dimensions are in mm
Packaging Information
Package/ Packaging Type Std. Packing Outer Carton
Case
Type Qty Qty Size L x W x
HGross Weight Qty Size L x
W x H
Gross
Weight
(cm) (Kg) (cm) (Kg)
DO-41P T&A 5,000 5K 27 x 8 x 14 1.96 45K 46 x 35 x
25 17.5
T & A: Tape and Ammo Pack
EM51_8Rev310506D
AMMO PACKING FOR DO-41P
AXIAL TAPE FOR DO-41P
Inner Carton
Continental Device India Limited Data Sheet Page 3 of 5
EM513 - EM518
DO-41P
Axial Plastic Package
i
i
DIM Min Max
A 50.0 54.0 1. 300 mm (Min) leader tape on every roll.
B 95.0 105.0
C 5.60 6.50 2. No. of empty places allowed 0.25% without consecutive empty places.
D 1.5R
E 9.50 10.50 3. Ends of leads shall normally not protrude beyond the tapes.
F 1.25
4. Components shall be held sufficiently in the tape or tapes so that
they can not come free in normal handling.
EM51_8Rev310506D
DO-41P 52 mm Tape TAPE SPECIFICATIONS
All Dimensions are in mm
Continental Device India Limited Data Sheet Page 4 of 5
EM513 - EM518
DO-41P
Axial Plastic Package
Component Disposal Instructions
1. CDIL Semiconductor Devices are RoHS compliant, customers are requested to please dispose
as per prevailing Environmental Legislation of their Country.
2. In Europe, please dispose as per EU Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE).
Customer Notes
EM51_8Rev310506D
Disclaimer
The product information and the selection guides facilitate selection of the CDIL's Semiconductor Device(s) best suited for application in your
product(s) as per your requirement. It is recommended that you completely review our Data Sheet(s) so as to confirm that the Device(s) meet
functionality parameters for your application. The information furnished in the Data Sheet and on the CDIL Web Site/CD are believed to be
accurate and reliable. CDIL however, does not assume responsibility for inaccuracies or incomplete information. Furthermore, CDIL does not
assume liability whatsoever, arising out of the application or use of any CDIL product; neither does it convey any license under its patent rights
nor rights of others. These products are not designed for use in life saving/support appliances or systems. CDIL customers selling these products
(either as individual Discrete Semiconductor Devices or incorporated in their end products), in any life saving/support appliances or systems or
applications do so at their own risk and CDIL will not be responsible for any damages resulting from such sale(s).
CDIL strives for continuous improvement and reserves the right to change the specifications of its products without prior notice.
CDIL is a registered Trademark of
Continental Device India Limited
C-120 Naraina Industrial Area, New Delhi 110 028, India.
Telephone + 91-11-2579 6150, 4141 1112 Fax + 91-11-2579 5290, 4141 1119
email@cdil.com www.cdilsemi.com
Continental Device India Limited Data Sheet Page 5 of 5