1N4678 thru 1N4717-1 DO-7 500 mW AXIAL-LEADED ZENER DIODES SCOTTSDALE DIVISION APPEARANCE The 1N4678 thru 1N4717 series of 0.5 watt Zener Voltage Regulators provides a selection from 1.8 to 43 volts in standard 5% tolerances as well as tighter tolerances identified by different suffix letters on the part number. These glass axial-leaded DO-7 Zeners also have an internal-metallurgicalbond similar to other military requirements for these packages. Microsemi also offers numerous other Zener products to meet higher and lower power applications. DO-7 (DO-204AA) IMPORTANT: For the most current data, consult MICROSEMI's website: http://www.microsemi.com FEATURES * * * * * APPLICATIONS / BENEFITS JEDEC registered 1N4678 thru 1N4717 Internally solder bonded Options for screening in accordance with MIL-PRF19500 for JAN, JANTX, JANTXV, and JANS are available by adding MQ, MX, MV, or MSP prefixes respectively to part numbers as well as "-1" suffix Surface Mount available in DO-213AA package outline by adding a UR or UR-1 (see separate data sheet for 1N4678UR thru 1N4717UR-1) DO-35 glass body axial-leaded Zener equivalents are also available (see separate data sheet) MAXIMUM RATINGS * * * * * * * * * * * * Regulates voltage over a broad operating current and temperature range Guaranteed maximum voltage regulation 10 A to 100 A Voltage selection from 1.8 to 43 V Standard voltage tolerances are plus/minus 5% with no suffix Tight tolerances available in plus or minus 2% or 1% with C or D suffix respectively Flexible axial-lead mounting terminals Nonsensitive to ESD per MIL-STD-750 Method 1020 Capacitance also specified (see Figure 3) Inherently radiation hard as described in Microsemi MicroNote 050 MECHANICAL AND PACKAGING Operating and Storage temperature: -65 C to +175C Thermal Resistance: 300 C/W junction to lead at 3/8 (10 mm) lead length from body, or 360C/W junction to ambient when mounted on FR4 PC board (1 oz Cu) with 4 mm2 copper pads and track width 1 mm, length 25 mm Steady-State Power: 0.5 watts at TL < 25oC 3/8 inch (10 mm) from body or 0.417 W at TA < 25C when mounted on FR4 PC board as described for thermal resistance (see Figure 2 for derating) Forward voltage @200 mA: 1.1 volts (maximum) Solder Temperatures: 260 C for 10 s (max) Copyright 2003 11-05-2003 REV A * * * * * * * * CASE: Hermetically sealed axial-lead glass DO-7 (DO-204AA) package TERMINALS: Leads, tin-lead plated solderable per MIL-STD-750, method 2026 POLARITY: Cathode indicated by band where diode is to be operated with the banded end positive with respect to the opposite end for Zener regulation MARKING: Part number TAPE & REEL option: Standard per EIA-296 (add "TR" suffix to part number) WEIGHT: 0.2 grams See package dimensions on last page Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 1 1N4678 4678 - 1N4717-1 * WWW . Microsemi .C OM DESCRIPTION 1N4678 thru 1N4717-1 DO-7 500 mW AXIAL-LEADED ZENER DIODES SCOTTSDALE DIVISION 1.8 2.0 2.2 2.4 2.7 3.0 3.3 3.6 3.9 4.3 4.7 5.1 5.6 6.2 6.8 7.5 8.2 8.7 9.1 10.0 11.0 12.0 13.0 14.0 15.0 16.0 17.0 18.0 19.0 20.0 22.0 24.0 25.0 27.0 28.0 30.0 33.0 36.0 39.0 43.0 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 50 0.70 0.70 0.75 0.80 0.85 0.90 0.95 0.95 0.97 0.99 0.99 0.97 0.96 0.95 0.90 0.75 0.50 0.10 0.08 0.10 0.11 0.12 0.13 0.14 0.15 0.16 0.17 0.18 0.19 0.20 0.22 0.24 0.25 0.27 0.28 0.30 0.33 0.36 0.39 0.43 IR A 7.5 5.0 4.0 2.0 1.0 0.8 7.5 7.5 5.0 4.0 10.0 10.0 10.0 10.0 10.0 10.0 1.0 1.0 1.0 1.0 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.05 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 0.01 @ VR VOLTS 1.0 1.0 1.0 1.0 1.0 1.0 1.5 2.0 2.0 2.0 3.0 3.0 4.0 5.0 5.1 5.7 6.2 6.6 6.9 7.6 8.4 9.1 9.8 10.6 11.4 12.1 12.9 13.6 14.4 15.2 16.7 18.2 19.0 20.4 21.2 22.8 25.0 27.3 29.6 32.6 MAXIMUM DC ZENER CURRENT* IZM mA 240 220 200 190 180 170 160 150 140 130 120 110 100 90 70 63.6 58.0 54.8 52.4 49.6 43.2 40.8 38.0 35.0 32.6 30.8 29.0 26.4 25.0 23.8 21.6 19.8 19.0 17.6 17.0 15.8 14.4 13.2 12.2 11.0 *JEDEC registered data except IZM has been increased (doubled) for 500 mW power dissipation capabilities NOTES: 1. 2. 3. Copyright 2003 11-05-2003 REV A All types as shown are +/-5% tolerance. Also available in 2% and 1% tolerance by adding suffix C and D respectively. VZ @ 100A minus VZ @ 10A. The electrical characteristics are measured after allowing the device to stabilize for 20 seconds when mounted with 3/8" minimum lead length from the base. Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 2 1N4678 - 1N4717-1 1N4678 1N4679 1N4680 1N4681 1N4682 1N4683 1N4684 1N4685 1N4686 1N4687 1N4688 1N4689 1N4690 1N4691 1N4692 1N4693 1N4694 1N4695 1N4696 1N4697 1N4698 1N4699 1N4700 1N4701 1N4702 1N4703 1N4704 1N4705 1N4706 1N4707 1N4708 1N4709 1N4710 1N4711 1N4712 1N4713 1N4714 1N4715 1N4716 1N4717 MAXIMUM REVERSE LEAKAGE CURRENT WWW . Microsemi .C OM *ELECTRICAL CHARACTERISTICS @ 25C JEDEC NOMINAL ZENER MAXIMUM TYPE ZENER TEST VOLTAGE NUMBER VOLTAGE CURRENT REGULATION (Note 3) (Note 2 & 3) (Note 1) VZ IZT VZ VOLTS VOLTS A 1N4678 thru 1N4717-1 DO-7 500 mW AXIAL-LEADED ZENER DIODES SCOTTSDALE DIVISION TEMPERATURE COEFFICIENT %/ C o RATED POWER DISSIPATION - mW mV Change /C o TEMPERATURE COEFFICIENT mV/ C o TL - LEAD TEMPERATURE ( C) 3/8" FROM BODY or TA on FR4 PC BOARD Voltage Temperature o Coefficient %/ C WWW . Microsemi .C OM GRAPHS NOMINAL ZENER VOLTAGE (VOLTS) FIGURE 1 POWER DERATING CURVE FIGURE 2 ZENER VOLTAGE TEMPERATURE COEFFICIENT vs. ZENER VOLTAGE 1N4678 4678 - 1N4717-1 Typical Capacitance in PicoFarads DO-7 PACKAGE DIMENSIONS ZENER VOLTAGE VZ FIGURE 3 CAPACITANCE vs. VZ CURVE Copyright 2003 11-05-2003 REV A All dimensions in: INCH mm Microsemi Scottsdale Division 8700 E. Thomas Rd. PO Box 1390, Scottsdale, AZ 85252 USA, (480) 941-6300, Fax: (480) 947-1503 Page 3