Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 Elektrische Eigenschaften / Electrical properties Hochstzulassige Werte / Maximum rated values Gleichrichterdiode, -thyristor / Rectifierdiode, -thyristor Periodische Spitzensperrspannung repetitive peak reverse voltage V RRM Tvj = - 40C...Tvj max Durchlastrom-Grenzeffektivwert (pro Element) RMS on-state current (per chip) ITRMSM 1600 V 70 A Ausgangsstrom output current TC = 85C Id 125 A Stostrom-Grenzwert surge current Tvj = 25C, tp = 10ms ITSM 650 550 A A Grenzlastintegral It-value Tvj = 25C, tp = 10ms Kritische Stromsteilheit critical rate of rise of on-state current DIN IEC 747-6 Kritische Spannungssteilheit critical rate of rise of off-state voltage Tvj = Tvj max, v D = 0,67 VDRM Tvj = Tvj max, t p = 10ms It Tvj = Tvj max, t p = 10ms (di/dt)cr 2100 1500 As As 120 A/s 1000 V/s 1200 V 70 A f = 50Hz, iGM = 0,6A, diG /dt = 0,6A/s (dv/dt)cr 8. Kennbuchstabe / 8th letter F IGBT Kollektor-Emitter-Sperrspannung collector-emitter voltage V CES Kollektor-Dauergleichstrom DC-collector current TC = 80C IC Periodischer Kollektor-Spitzenstrom repetitive peak collektor current t p = 1ms ICRM 150 A Gesamt-Verlustleistung total power dissipation TC = 25C Ptot 400 W V GE 20 V V RRM 1200 V Gate-Emitter Spitzenspannung gate-emitter peak voltage Schnelle Diode / Fast diode Periodische Spitzensperrspannung repetitive peak reverse voltage Dauergleichstrom DC forward current TC = 80C IF 35 A Periodischer Spitzenstrom repetitive peak forward current t p = 1ms IFRM 70 A Isolations-Prufspannung insulation test voltage RMS, f = 50Hz, t = 1min V ISOL 2,5 kV prepared by: Ralf Jorke approved by: Lothar Kleber date of publication: 13.12.2000 revision: 1 Modul BIP AM; R. Jorke NTC connected to baseplate 19. Dez 00 http://store.iiic.cc/ A 32/00 Seite/page 1(12) Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 Elektrische Eigenschaften / Electrical properties Charakteristische Werte / Characteristic values Gleichrichterdiode, -thyristor / Rectifierdiode, -thyristor min. typ. max. Durchlaspannung forward voltage Tvj = Tvj max, iF = 100A vF 1,35 V Schleusenspannung threshold voltage Tvj = Tvj max V(TO) 0,75 V Ersatzwiderstand forward slope resistance Tvj = Tvj max rT 6,3 m Zundstrom gate trigger current Tvj = 25C, vD = 6V IGT 150 mA Zundspannung gate trigger voltage Tvj = 25C, vD = 6V VGT 2,5 V Tvj = Tvj max, vD = 6V IGD 5,0 2,5 mA mA 0,2 V Nicht zundender Steuerstrom gate non-trigger current Tvj = Tvj max, vD = 0,5 VDRM Nicht zundende Steuerspannung gate non-trigger voltage Tvj = Tvj max, vD = 0,5 VDRM VGD Haltestrom holding current Tvj = 25C, vD = 6V, RA = 5 IH 200 mA Einraststrom latching current Tvj = 25C, vD = 6V, RGK 20 IL 600 mA iD, iR 10 mA tgd 1,2 s 190 s iGM = 0,6A, diG/dt = 0,6A/s, tg = 10s Vorwarts- und Ruckwarts-Sperrstrom forward off-state and reverse currents vD = VDRM, vR = VRRM Zundverzug gate controlled delay time Tvj = 25C, iGM = 0,6A, diG/dt = 0,6A/s Tvj = Tvj max DIN IEC 747-6 Freiwerdezeit circuit commutated turn-off time Tvj = Tvj max, iTM = 50A tq vRM = 100V, VDM = 0,67 VDRM dVD/dt = 20V/s, -diT /dt = 10A/s 7. Kennbuchstabe / 7th letter O TC = 25C RAA+KK Kollektor-Emitter Sattigungsspannung collector-emitter saturation voltage Tvj = 25C, iC = 70A, vGE = 15V vCE sat Gate-Emitter-Schwellspannung gate-emitter threshold voltage Tvj = 25C, iC = 3mA, vGE = vCE vGE(TO) Tvj = 25C, f0 = 1MHz, Cies 5,1 iCES 10 500 Modul Leitungswiderstand, Anschlusse-Chip lead resistance, terminals-chip 1 m IGBT 2,05 2,75 2,40 Tvj = 125C, iC = 70A, vGE = 15V Eingangskapazitat input capacitance 4,5 5,5 6,5 V V nF vCE = 25V, vGE = 0V Kollektor-Emitter Reststrom collector-emitter cut-off current Tvj = 25C, vCE = 1200V, vGE = 0V 500 A Gate-Emitter Reststrom gate leakage current Tvj = 25C, vCE = 0V, vGE = 20V iGES 400 nA Emitter-Gate Reststrom gate-leakage current Tvj = 25C, vCE = 0V, vEG = 20V iEGS 400 nA Durchlaspannung forward voltage Tvj = 25C, iF = 35A vF Sperrverzogerungsladung recovered charge iFM = 35A, -di/dt = 900A/s, vR = 600V Tvj = 125C, vCE = 1200V, vGE = 0V Schnelle Diode / Fast diode Tvj = 125C, iF = 35A Tvj = 25C Tvj = 125C BIP AM; R. Jorke 19. Dez 00 1,85 2,40 1,75 Qr 3,6 7,6 Seite/page 2(12) http://store.iiic.cc/ V As As Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 Thermische Eigenschaften / Thermal properties Gleichrichter / Rectifier , = 120rect Innerer Warmewiderstand thermal resistance, junction to case RthJC max. 0,63 max. 0,25 max. 0,80 C/W C/W C/W RthCK max. 0,25 max. 0,16 max. 0,24 C/W C/W C/W Transistor / Transistor, DC Schnelle Diode / Fast diode, DC Ubergangs-Warmewiderstand thermal resistance, case to heatsink Gleichrichter / Rectifier Transistor / Transistor Schnelle Diode / Fast diode Hochstzulassige Sperrschichttemperatur max. junction temperature Tvj max Betriebstemperatur operating temperature Lagertemperatur storage temperature 125 C Tc op - 40...+125 C Tstg - 40...+130 C Mechanische Eigenschaften / Mechanical properties Gehause, siehe Anlage case, see appendix Seite 4 page 4 Al2O3 Innere Isolation internal insulation CTI comperative tracking index 225 Anzugsdrehmoment fur mechanische Befestigung mounting torque Toleranz / tolerance 15% Gewicht weight M1 G 4 typ. Kriechstrecke creepage distance Schwingfestigkeit vibration resistance f = 50Hz V Nm 185 g 12,5 mm 50 m/s Temperatursensor / Temperature sensor R25 Nennwiderstand rated resistance TC = 25C Verlustleistung power dissipation TC = 25C P25 B-Wert B-value R2 = R1 exp [B(1/T1 - 1/T2)] B25/50 5 k 20 mW R100 = 493 5% max. 3375 K Kuhlkorper / heatsinks : Mit dieser technischen Information werden Halbleiterbauelemente spezifiziert, jedoch keine Eigenschaften zugesichert. Sie gilt in Verbindung mit den zugehorigen Technischen Erlauterungen. / This technical Information specifies semiconductor devices but promises no characteristics. It is valid in combination with the belonging technical notes. BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 3(12) Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT BIP AM; R. Jorke TD B6HK 124 N 16 RR 19. Dez 00 http://store.iiic.cc/ N Seite/page 4(12) B6 Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N Analytische Elemente des transienten Warmewiderstandes ZthJC fur DC, Gleichrichter Analytical elements of transient thermal impedance ZthJC for DC, rectifier Pos. n 1 2 3 4 R thn [ C / W ] 0,2370 0,1770 0,0290 0,0180 n [s] 0,0300 0,0190 0,0140 0,0003 5 t - = Rthn 1 - e n n =1 nmax Analytische Funktion: BIP AM; R. Jorke Z thJC 19. Dez 00 6 7 Seite/page 5(12) http://store.iiic.cc/ B6 Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 200 180 Tvj = 125C 160 140 i T [A] 120 100 80 60 40 20 0 0 0,2 0,4 0,6 0,8 1 1,2 1,4 1,6 1,8 vT [V] Grenzdurchlakennlinie / Limiting on-state characteristic iT = f(vT ) BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 6(12) 2 Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 150 140 130 120 110 TC [C] 100 90 80 70 60 50 40 B2: 180sin B6: 120rect 30 20 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 Id [A] Hochstzulassige Gehausetemperatur / Maximum allowable case temperatur TC = f(Id) Parameter: Stromrichterschaltung / converter circuit BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 7(12) 150 Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 1000 250A 100A 50A Qr [As] 20A 100 1 10 100 - di/dt [A/s] Sperrverzogerungsladung / Recovered charge Qr = f(-di/dt) Tvj = Tvjmax; vR = 0,5VRRM; vRM = 0,8VRRM Parameter: Durchlastrom / On-state current i TM BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 8(12) Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 0,80 60 rect 0,70 120 rect 0,60 180 rect 180 sin 0,50 ZthJC [C/W] DC 0,40 0,30 0,20 0,10 0,00 0,001 0,01 0,1 1 t [s] Transienter innerer Warmewiderstand Gleichrichter / Transient thermal impedance converter ZthJC = f(t) Parameter: Stromfluwinkel / Current conduction angle BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 9(12) Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 150 125 Tvj = 25C Tvj = 125C iC [A] 100 75 50 25 0 0 0,5 1 1,5 2 2,5 3 3,5 v CE [V] Ausgangskennlinienfeld Brems-Chopper-IGBT (typisch) / Output characteristic brake-chopper-IGBT (typical) vGE = 15V , iC = f(vCE) BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 10(12) 4 Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 50 40 Tvj = 125C Tvj = 25C iF [A] 30 20 10 0 0 0,5 1 1,5 2 2,5 v F [V] Durchlakennlinie der Brems-Chopper-Diode (typisch) / On-state characteristic of brake-chopper-FWD (typical) iF = f(vF) BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 11(12) Technische Information / Technical Information Thyristor-Modul mit Chopper-IGBT Thyristor Module with Chopper-IGBT TD B6HK 124 N 16 RR N B6 100 R [k ] 10 1 0,1 0 10 20 30 40 50 60 70 80 90 100 110 120 130 140 T [C] NTC-Temperaturkennlinie (typisch) / NTC-temperature characteristic (typical) R = f(T) BIP AM; R. Jorke 19. Dez 00 http://store.iiic.cc/ Seite/page 12(12) 150 Nutzungsbedingungen Die in diesem Produktdatenblatt enthaltenen Daten sind ausschlielich fur technisch geschultes Fachpersonal bestimmt. Die Beurteilung der Geeignetheit dieses Produktes fur die von Ihnen anvisierte Anwendung sowie die Beurteilung der Vollstandigkeit der bereitgestellten Produktdaten fur diese Anwendung obliegt Ihnen bzw. Ihren technischen Abteilungen. In diesem Produktdatenblatt werden diejenigen Merkmale beschrieben, fur die wir eine liefervertragliche Gewahrleistung ubernehmen. Eine solche Gewahrleistung richtet sich ausschlielich nach Magabe der im jeweiligen Liefervertrag enthaltenen Bestimmungen. Garantien jeglicher Art werden fur das Produkt und dessen Eigenschaften keinesfalls ubernommen. Sollten Sie von uns Produktinformationen benotigen, die uber den Inhalt dieses Produktdatenblatts hinausgehen und insbesondere eine spezifische Verwendung und den Einsatz dieses Produktes betreffen, setzen Sie sich bitte mit dem fur Sie zustandigen Vertriebsburo in Verbindung (siehe www.eupec.com, Vertrieb&Kontakt). Fur Interessenten halten wir Application Notes bereit. Aufgrund der technischen Anforderungen konnte unser Produkt gesundheitsgefahrdende Substanzen enthalten. Bei Ruckfragen zu den in diesem Produkt jeweils enthaltenen Substanzen setzen Sie sich bitte ebenfalls mit dem fur Sie zustandigen Vertriebsburo in Verbindung. Sollten Sie beabsichtigen, das Produkt in Anwendungen der Luftfahrt, in gesundheits- oder lebensgefahrdenden oder lebenserhaltenden Anwendungsbereichen einzusetzen, bitten wir um Mitteilung. Wir weisen darauf hin, dass wir fur diese Falle - die gemeinsame Durchfuhrung eines Risiko- und Qualitatsassessments; - den Abschluss von speziellen Qualitatssicherungsvereinbarungen; - die gemeinsame Einfuhrung von Manahmen zu einer laufenden Produktbeobachtung dringend empfehlen und gegebenenfalls die Belieferung von der Umsetzung solcher Manahmen abhangig machen. Soweit erforderlich, bitten wir Sie, entsprechende Hinweise an Ihre Kunden zu geben. Inhaltliche Anderungen dieses Produktdatenblatts bleiben vorbehalten. Terms & Conditions of usage The data contained in this product data sheet is exclusively intended for technically trained staff. You and your technical departments will have to evaluate the suitability of the product for the intended application and the completeness of the product data with respect to such application. This product data sheet is describing the characteristics of this product for which a warranty is granted. Any such warranty is granted exclusively pursuant the terms and conditions of the supply agreement. There will be no guarantee of any kind for the product and its characteristics. Should you require product information in excess of the data given in this product data sheet or which concerns the specific application of our product, please contact the sales office, which is responsible for you (see www.eupec.com, sales&contact). For those that are specifically interested we may provide application notes. Due to technical requirements our product may contain dangerous substances. For information on the types in question please contact the sales office, which is responsible for you. Should you intend to use the Product in aviation applications, in health or live endangering or life support applications, please notify. Please note, that for any such applications we urgently recommend - to perform joint Risk and Quality Assessments; - the conclusion of Quality Agreements; - to establish joint measures of an ongoing product survey, and that we may make delivery depended on the realization of any such measures. If and to the extent necessary, please forward equivalent notices to your customers. Changes of this product data sheet are reserved. http://store.iiic.cc/