LA6324NM - Sanyo Semiconductor

High-Performance

Quad Operational Amplifier

Overview

The LA6324 consists of four independent, high-performance,

internally phase compensated operational amplifiers that are

designed to operate from a single power supply over a wide

range of voltages. These four operational amplifiers are

packaged in a single package. As in case of conventional

general-purpose operational amplifiers, operation from dual

power supplies is also possible and the power dissipation is

low. It can be applied to various uses in commercial and

industrial equipment including all types of transducer

amplifiers and DC amplifiers.

Features

.No phase compensation required

.Wide operating voltage range:

3.0 V to 30.0 V (single supply)

±1.5Vto±15.0 V (dual supplies)

.Highly resistant to dielectric breakdown

.Input voltage range includes the neighborhood of GND level

and output voltage range VOUT is from 0 to VCC – 1.5 V.

.Small current dissipation:

ICC = 0.6 mA typ/VCC =+5V,R

L=∞

Package Dimensions

unit : mm

3003A-DIP14

[LA6324N]

SANYO : DIP14

unit : mm

3034A-MFP14

[LA6324NM]

SANYO : MFP14

Ordering number: EN2704B

Monolithic Linear IC

LA6324N, 6324NM

Any and all SANYO products described or contained herein do not have specifications that can handle

applications that require extremely high levels of reliability, such as life-support systems, aircraft’s

control systems, or other applications whose failure can be reasonably expected to result in serious

physical and/or material damage. Consult with your SANYO representative nearest you before using

any SANYO products described or contained herein in such applications.

SANYO assumes no responsibility for equipment failures that result from using products at values that

exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges, or other

parameters) listed in products specifications of any and all SANYO products described or contained

herein.

SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters

TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN

63096HA(II)/4138TA(KOTO) No.2704-1/5

Specifications

Maximum Ratings at Ta = 25°C

Parameter Symbol Conditions Ratings Unit

Maximum supply voltage VCC max 32 V

Differential input voltage VID 32 V

Maximum input voltage VIN max –0.3 to +32 V

Allowable power dissipation Pd max LA6324N 720 mW

LA6324NM 330 mW

Operating temperature Topr –30 to +85 °C

Storage temperature Tstg –55 to +125 °C

Operating Characteristics at Ta = 25°C, VCC =+5V

Parameter Symbol Conditions Test circuit min typ max Unit

Input offset voltage VIO 1±2±7mV

Input offset current IIO IIN(+)/I

IN(–) 2 ±5±50 nA

Input bias current IBIIN(+)/I

IN(–) 3 45 250 nA

Common-mode input voltage

range VICM 40 V

CC – 1.5 V

Common-mode rejection ratio CMR 4 65 80 dB

Voltage gain VG VCC =15V,R

L^2kΩ5 25 100 V/mV

Output voltage range VOUT 0V

CC – 1.5 V

Supply voltage rejection ratio SVR 6 65 100 dB

Channel separation CS f=1kto20kHz 7 120 dB

Current drain ICC 8 0.6 2 mA

ICC VCC =30V 8 1.5 3 mA

Output current (Source) IOsource VIN

=1V,V

–

=0V 9 20 40 mA

Output current (Sink) IOsink VIN

=0V,V

–

= 1 V 10 10 20 mA

Equivalent Circuit

(1 unit)

Pin Assignment

(LA6324N, 6324NM)

Top view

LA6324N, 6324NM

No.2704-2/5

Test Circuit

1. Input offset voltage VIO 2. Input offset current IIO

3. Input bias current IB

4. Common-mode rejection ratio CMR

Common-mode input voltage range VICM 5. Voltage gain VG

6. Supply voltage rejection ratio SVR

7. Channel separation CS

SW: a

SW: b

These apply also to other channels.

LA6324N, 6324NM

No.2704-3/5

8. Current drain ICC 9. Output current IOsource 10. Output current IOsink

Current drain, ICC –mA

CC –V

Supply voltage, VCC –V

Input bias current, IB–nA

B–V

Supply voltage, VCC –V

Output current, IO(source) – mA

IO(source) – Ta

Ambient temperature, Ta – °C

Voltage gain, VG – dB

VG–V

Supply voltage, VCC –V

Output voltage amplitude, VOUT – Vp-p

VO–f

Frequency,f–Hz

Voltage gain, VG – dB

VG–f

CC =30V

10 to 15 V

Frequency,f–Hz

LA6324N, 6324NM

No.2704-4/5

Sample Application Circuits

Allowable power dissipation, Pd max – mW

Pd max – Ta

Ambient temperature, Ta – °C

Pd max – Ta

Allowable power dissipation, Pd max – mW

Ambient temperature, Ta – °C

Noninverting DC amplifier Inverting AC amplifierRectangular wave oscillator

Unit (resistance: Ω, capacitance: F)

LA6324N, 6324NM

PS No.2704-5/5

Specifications of any and all SANYO products described or contained herein stipulate the performance,

characteristics, and functions of the described products in the independent state, and are not guarantees

of the performance, characteristics, and functions of the described products as mounted in the customer’s

products or equipment. To verify symptoms and states that cannot be evaluated in an independent device,

the customer should always evaluate and test devices mounted in the customer’s products or equipment.

SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all

semiconductor products fail with some probability. It is possible that these probabilistic failures could

give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire,

or that could cause damage to other property. When designing equipment, adopt safety measures so

that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective

circuits and error prevention circuits for safe design, redundant design, and structural design.

In the event that any or all SANYO products(including technical data,services) described or

contained herein are controlled under any of applicable local export control laws and regulations,

such products must not be exported without obtaining the export license from the authorities

concerned in accordance with the above law.

No part of this publication may be reproduced or transmitted in any form or by any means, electronic or

mechanical, including photocopying and recording, or any information storage or retrieval system,

or otherwise, without the prior written permission of SANYO Electric Co. , Ltd.

Any and all information described or contained herein are subject to change without notice due to

product/technology improvement, etc. When designing equipment, refer to the “Delivery Specification”

for the SANYO product that you intend to use.

Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not

guaranteed for volume production. SANYO believes information herein is accurate and reliable, but

no guarantees are made or implied regarding its use or any infringements of intellectual property rights

or other rights of third parties.

This catalog provides information as of June, 1996. Specifications and information herein are subject to

change without notice.