Tyco / Electronics PolySwitch(R) PTC Devices Raychem Circuit Protection 308 Constitution Drive Menlo Park, CA 94025-1164 Phone: 800-227-4856 Fax: 800-227-4866 PRODUCT: RGEF600-1 DOCUMENT: SCD 25832 PCN: E75873 REV LETTER: B REV DATE: JUNE 29, 2005 PAGE NO.: 1 OF 1 Overcurrent Protection Device Specification Status: Released Electrical Rating Voltage: 16V MAX Current: 100A MAX Insulating Material: Cured, Flame Retardant Epoxy Polymer meets UL94 V-0 Requirements Lead Material: 20 AWG Tin Plated Copper (0.81mm [0.032] nom. diameter) Marking: Raychem Logo and Voltage 16 GF600 Part Identification Lot Identification (can be on back) TABLE I. DIMENSIONS: mm: in*: A B MIN MAX MIN MAX 9.7 10.7 12.2 17.1 (0.38) (0.42) (0.48) (0.67) *Rounded off approximation C MIN 4.3 (0.17) D MAX 5.8 (0.23) MIN 25.4 (1.0) E MAX - MIN 2.0 (0.08) MAX 3.0 (0.12) F TYP 1.2 (0.05) TABLE II. PERFORMANCE RATINGS: I HOLD RATED CURRENT CURRENT RATINGS INITIAL RESISTANCE VALUES TIME TO TRIP AMPS AT 25C HOLD 6.0 AMPS AT 25C HOLD TRIP 6.0 10.2 OHMS AT 25C MIN MAX 0.0100 0.0190 SECONDS AT 25C, 30A MAX 3.3 Agency Recognitions: Reference Documents: Precedence: Effectivity: CAUTION: R1 MAX 1 HR. POST TRIP RESISTANCE STANDARD TRIP OHMS AT 25C MAX 0.0280 WATTS AT 25C TYP 2.8 UL, CSA, TUV PS300 This specification takes precedence over documents referenced herein. Reference documents shall be the issue in effect on the date of invitation for bid. Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame. Materials Information ROHS Compliant TRIPPEDSTATE POWER DISSIPATION ELV Compliant (c) 2005 Tyco Electronics Corporation. All rights reserved. Pb-Free