Tyco / Electronics
Raychem Circuit Protection
308 Constitution Drive
Menlo Park, CA 94025-1164
Phone: 800-227-4856
Fax: 800-227-4866
PolySwitch®
PTC Devices
Overcurrent Protection Device
PRODUCT: RGEF600-1
DOCUMENT: SCD 25832
PCN: E75873
REV LETTER: B
REV DATE: JUNE 29, 2005
PAGE NO.: 1 OF 1
Specification Status: Released
Electrical Rating
Voltage: 16V MAX
Current: 100A MAX
Insulating Material:
Cured, Flame Retardant Epoxy Polymer
meets UL94 V-0 Requirements
Lead Material:
20 AWG Tin Plated Copper
(0.81mm [0.032] nom. diameter)
Marking:
Ra
y
chem Lo
g
o
and Volta
g
e
Lot Identification
(
can be on back
)
Part Identification
16
GF600
TABLE I. DIMENSIONS:
A B C D E F
MIN MAX MIN MAX MIN MAX MIN MAX MIN MAX TYP
mm: 9.7 10.7 12.2 17.1 4.3 5.8 25.4 - 2.0 3.0 1.2
in*: (0.38) (0.42) (0.48) (0.67) (0.17) (0.23) (1.0) - (0.08) (0.12) (0.05)
*Rounded off approximation
TABLE II. PERFORMANCE RATINGS:
I HOLD
RATED
CURRENT
CURRENT
RATINGS INITIAL
RESISTANCE
VALUES
TIME TO TRIP R1 MAX
1 HR. POST
TRIP
RESISTANCE
STANDARD
TRIP
TRIPPED-
STATE
POWER
DISSIPATION
AMPS
AT 25°C AMPS
AT 25°C OHMS
AT 25°C SECONDS AT
25°C, 30A OHMS
AT 25°C WATTS
AT 25°C
HOLD HOLD TRIP MIN MAX MAX MAX TYP
6.0 6.0 10.2 0.0100 0.0190 3.3 0.0280 2.8
Agency Recognitions: UL, CSA, TUV
Reference Documents: PS300
Precedence: This specification takes precedence over documents referenced herein.
Effectivity: Reference documents shall be the issue in effect on the date of invitation for bid.
CAUTION: Operation beyond the rated voltage or current may result in rupture, electrical arcing or flame.
Materials Information
ROHS Compliant ELV Compliant Pb-Free
© 2005 Tyco Electronics Corporation. All rights reserved.
