DATA BRIEF
Rev 1
November 2005 1/3
3
AC7MDT10-D32/S28
SDIP32/SO28 Connection Kit for ST7MDT10-EMU3
The SDIP32/SO28 Connection Kit (AC7MDT10-
D32/S28) provides the hardware you need to
connect your ST7MDT10-EMU3 emulator to your
application when debugging applications for ST7
microcontrollers in SDIP32 and SO28 packages.
Connection Kit Contents
■SDIP32 adapter (DB510) – Allows the
connection of your ST7MDT10-EMU3 emulator
to your application board in place of your ST7.
■SDIP32-SO28 device adapter (DB359) –
Adapts the SDIP32 adapter to SO28 footprint
of the ST7 on your application board.
For more information...
■ST7-EMU3 User Manual – Information
common to all EMU3 series emulators
■ST7MDT10-EMU3 Probe User Guide –
Information specific to ST7MDT10-EMU3
Figure 1. SDIP32 adapter
SDIP32 adapter (DB510)
Figure 2. SDIP32 application connection
Figure 3. SDIP32 to SO28 device adapter
1. Solder socket on to the
application board.
3. Align pin 1 indicators, then
insert the pins of the SDIP32
adapter into the socket on the
application board.
Pin 1
Indicators
2. Plug the SDIP32 adapter
into the W2 connector on the
target emulation board of your
ST7MDT10-EM3.
Application board
SDIP32 adapter (DB510)
SO28 device adapter
(DB359)
www.st.com
AC7MDT10-D32/S28
2/3
Revision history
Figure 4. SO28 application board connection
Date Revision Changes
14-November-2005 1Initial release.
1. Solder the connection pins to your
application board in place of your MCU. When
soldering, insert the connection pins into the
device adapter, which serves as a support to
ensure correct alignment.
2. Plug the SDIP32 adapter
into the W2 connector on the
target emulation board of your
ST7MDT10-EM3.
3. Align pin 1 indicators, then
insert the pins of the SDIP32
adapter into the SDIP32-
SO28 device adapter.
Pin 1
Indicators
Application board
AC7MDT10-D32/S28
3/3
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences
of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted
by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject
to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not
authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics.
The ST logo is a registered trademark of STMicroelectronics.
All other names are the property of their respective owners
© 2005 STMicroelectronics - All rights reserved
STMicroelectronics group of companies
Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan -
Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America
www.st.com
