DISCRETE SEMICONDUCTORS DATA SHEET BGY887B CATV amplifier module Product specification Supersedes data of February 1995 1997 Apr 15 NXP Semiconductors Product specification CATV amplifier module FEATURES BGY887B PINNING - SOT115J Excellent linearity PIN DESCRIPTION Extremely low noise 1 input High gain 2 common Excellent return loss properties. 3 common alfpage 5 +VB APPLICATIONS 7 common Single-module line extender in CATV systems operating in the 40 to 860 MHz frequency range. 8 common 9 output 1 2 8 5 7 9 3 Side view MSA319 Fig.1 Simplified outline. DESCRIPTION Hybrid amplifier module in a SOT115J package operating with a voltage supply of 24 V (DC). This high gain module consists of two cascaded stages, both in cascode configuration. QUICK REFERENCE DATA SYMBOL PARAMETER CONDITIONS MIN. MAX. UNIT Gp power gain f = 50 MHz 28.5 29.5 dB f = 860 MHz 29 dB Itot total current consumption (DC) VB = 24 V 340 mA LIMITING VALUES In accordance with the Absolute Maximum Rating System (IEC 134). SYMBOL PARAMETER MIN. MAX. UNIT Vi RF input voltage 55 dBmV Tstg storage temperature 40 +100 C Tmb operating mounting base temperature 20 +100 C 1997 Apr 15 2 NXP Semiconductors Product specification CATV amplifier module BGY887B CHARACTERISTICS Table 1 Bandwidth 40 to 860 MHz; VB = 24 V; Tmb = 30 C; ZS = ZL = 75 SYMBOL PARAMETER Gp power gain SL slope cable equivalent FL S11 S22 CONDITIONS MIN. MAX. f = 50 MHz 28.5 f = 860 MHz 29 dB f = 40 to 860 MHz 0.5 2.5 dB flatness of frequency response f = 40 to 860 MHz 0.5 dB input return losses f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 860 MHz 14 dB f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 860 MHz 14 dB output return losses 29.5 UNIT dB CTB composite triple beat 49 channels flat; Vo = 44 dBmV; measured at 859.25 MHz 60 dB Xmod cross modulation 49 channels flat; Vo = 44 dBmV; measured at 55.25 MHz 60 dB CSO composite second order distortion 49 channels flat; Vo = 44 dBmV; measured at 860.5 MHz 60 dB d2 second order distortion note 1 70 dB Vo output voltage dim = 60 dB; note 2 58.5 dBmV F noise figure f = 50 MHz 5 dB f = 550 MHz 5.5 dB f = 600 MHz 5.5 dB f = 650 MHz 5.5 dB f = 750 MHz 6 dB f = 860 MHz 6.5 dB note 3 340 mA Itot total current consumption (DC) Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 805.25 MHz; Vq = 44 dBmV; measured at fp + fq = 860.5 MHz. 2. Measured according to DIN45004B: fp = 851.25 MHz; Vp = Vo; fq = 858.25 MHz; Vq = Vo 6 dB; fr = 860.25 MHz; Vr = Vo 6 dB; measured at fp + fq fr = 849.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1997 Apr 15 3 NXP Semiconductors Product specification CATV amplifier module Table 2 BGY887B Bandwidth 40 to 860 MHz; VB = 24 V; Tmb = 30 C; ZS = ZL = 75 SYMBOL Gp PARAMETER power gain CONDITIONS MIN. MAX. UNIT f = 50 MHz 28.5 29.5 dB f = 860 MHz 29 dB f = 40 to 860 MHz 0.5 2.5 dB SL slope cable equivalent FL flatness of frequency response f = 40 to 860 MHz 0.5 dB S11 input return losses f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 860 MHz 14 dB f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 860 MHz 14 dB S22 output return losses CTB composite triple beat 129 channels flat; Vo = 44 dBmV; measured at 859.25 MHz 46 dB Xmod cross modulation 129 channels flat; Vo = 44 dBmV; measured at 55.25 MHz 52 dB CSO composite second order distortion 129 channels flat; Vo = 44 dBmV; measured at 860.5 MHz 53 dB d2 second order distortion note 1 70 dB Vo output voltage dim = 60 dB; note 2 58.5 dBmV F noise figure see Table 1 dB Itot total current consumption (DC) note 3 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 805.25 MHz; Vq = 44 dBmV; measured at fp + fq = 860.5 MHz. 2. Measured according to DIN45004B: fp = 851.25 MHz; Vp = Vo; fq = 858.25 MHz; Vq = Vo 6 dB; fr = 860.25 MHz; Vr = Vo 6 dB; measured at fp + fq fr = 849.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1997 Apr 15 4 NXP Semiconductors Product specification CATV amplifier module Table 3 BGY887B Bandwidth 40 to 750 MHz; VB = 24 V; Tmb = 30 C; ZS = ZL = 75 SYMBOL Gp PARAMETER power gain CONDITIONS MIN. MAX. UNIT f = 50 MHz 28.5 29.5 dB f = 750 MHz 29 dB 0.2 2.2 dB SL slope cable equivalent f = 40 to 750 MHz FL flatness of frequency response f = 40 to 750 MHz 0.45 dB S11 input return losses f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 750 MHz 14 dB f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 640 MHz 15.5 dB f = 640 to 750 MHz 14 dB S22 output return losses CTB composite triple beat 110 channels flat; Vo = 44 dBmV; measured at 745.25 MHz 50 dB Xmod cross modulation 110 channels flat; Vo = 44 dBmV; measured at 55.25 MHz 54 dB CSO composite second order distortion 110 channels flat; Vo = 44 dBmV; measured at 746.5 MHz 56 dB d2 second order distortion note 1 70 dB Vo output voltage dim = 60 dB; note 2 59 dBmV F noise figure see Table 1 dB Itot total current consumption (DC) note 3 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 691.25 MHz; Vq = 44 dBmV; measured at fp + fq = 746.5 MHz. 2. Measured according to DIN45004B: fp = 740.25 MHz; Vp = Vo; fq = 747.25 MHz; Vq = Vo 6 dB; fr = 749.25 MHz; Vr = Vo 6 dB; measured at fp + fq fr = 738.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1997 Apr 15 5 NXP Semiconductors Product specification CATV amplifier module Table 4 BGY887B Bandwidth 40 to 600 MHz; VB = 24 V; Tmb = 30 C; ZS = ZL = 75 SYMBOL Gp PARAMETER power gain CONDITIONS MIN. MAX. UNIT f = 50 MHz 28.5 29.5 dB f = 600 MHz 29 dB 2 dB SL slope cable equivalent f = 40 to 600 MHz FL flatness of frequency response f = 40 to 600 MHz 0.35 dB S11 input return losses f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 600 MHz 16 dB f = 40 to 80 MHz 20 dB f = 80 to 160 MHz 18.5 dB f = 160 to 320 MHz 17 dB f = 320 to 600 MHz 16 dB S22 output return losses CTB composite triple beat 85 channels flat; Vo = 44 dBmV; measured at 595.25 MHz 55 dB Xmod cross modulation 85 channels flat; Vo = 44 dBmV; measured at 55.25 MHz 56 dB CSO composite second order distortion 85 channels flat; Vo = 44 dBmV; measured at 596.5 MHz 60 dB d2 second order distortion note 1 72 dB Vo output voltage dim = 60 dB; note 2 61 dBmV F noise figure see Table 1 dB Itot total current consumption (DC) note 3 340 mA Notes 1. fp = 55.25 MHz; Vp = 44 dBmV; fq = 541.25 MHz; Vq = 44 dBmV; measured at fp + fq = 596.5 MHz. 2. Measured according to DIN45004B: fp = 590.25 MHz; Vp = Vo; fq = 597.25 MHz; Vq = Vo 6 dB; fr = 599.25 MHz; Vr = Vo 6 dB; measured at fp + fq fr = 588.25 MHz. 3. The module normally operates at VB = 24 V, but is able to withstand supply transients up to 30 V. 1997 Apr 15 6 NXP Semiconductors Product specification CATV amplifier module BGY887B PACKAGE OUTLINE Rectangular single-ended package; aluminium flange; 2 vertical mounting holes; 2 x 6-32 UNC and 2 extra horizontal mounting holes; 7 gold-plated in-line leads SOT115J D E Z p A2 1 2 3 5 7 8 9 A L F S W c e b w M e1 d U2 q2 Q B y M B q1 x M B y M B p U1 q 0 5 10 mm scale DIMENSIONS (mm are the original dimensions) UNIT A2 A max. max. mm 20.8 9.5 OUTLINE VERSION b c D max. d E max. e e1 F L min. p 4.15 2.04 0.51 0.25 27.2 13.75 2.54 5.08 12.7 8.8 3.85 2.54 0.38 REFERENCES IEC JEDEC JEITA q q1 q2 S U1 U2 W w x 2.4 38.1 25.4 10.2 4.2 44.75 8.2 6-32 0.25 0.7 44.25 7.8 UNC EUROPEAN PROJECTION y Z max. 0.1 3.8 ISSUE DATE 04-02-04 10-06-18 SOT115J 1997 Apr 15 Q max. 7 NXP Semiconductors Product specification CATV amplifier module BGY887B DATA SHEET STATUS DOCUMENT STATUS(1) PRODUCT STATUS(2) DEFINITION Objective data sheet Development This document contains data from the objective specification for product development. Preliminary data sheet Qualification This document contains data from the preliminary specification. Product data sheet Production This document contains the product specification. Notes 1. Please consult the most recently issued document before initiating or completing a design. 2. The product status of device(s) described in this document may have changed since this document was published and may differ in case of multiple devices. The latest product status information is available on the Internet at URL http://www.nxp.com. DISCLAIMERS property or environmental damage. NXP Semiconductors accepts no liability for inclusion and/or use of NXP Semiconductors products in such equipment or applications and therefore such inclusion and/or use is at the customer's own risk. Limited warranty and liability Information in this document is believed to be accurate and reliable. However, NXP Semiconductors does not give any representations or warranties, expressed or implied, as to the accuracy or completeness of such information and shall have no liability for the consequences of use of such information. Applications Applications that are described herein for any of these products are for illustrative purposes only. NXP Semiconductors makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification. In no event shall NXP Semiconductors be liable for any indirect, incidental, punitive, special or consequential damages (including - without limitation - lost profits, lost savings, business interruption, costs related to the removal or replacement of any products or rework charges) whether or not such damages are based on tort (including negligence), warranty, breach of contract or any other legal theory. Customers are responsible for the design and operation of their applications and products using NXP Semiconductors products, and NXP Semiconductors accepts no liability for any assistance with applications or customer product design. It is customer's sole responsibility to determine whether the NXP Semiconductors product is suitable and fit for the customer's applications and products planned, as well as for the planned application and use of customer's third party customer(s). Customers should provide appropriate design and operating safeguards to minimize the risks associated with their applications and products. Notwithstanding any damages that customer might incur for any reason whatsoever, NXP Semiconductors' aggregate and cumulative liability towards customer for the products described herein shall be limited in accordance with the Terms and conditions of commercial sale of NXP Semiconductors. NXP Semiconductors does not accept any liability related to any default, damage, costs or problem which is based on any weakness or default in the customer's applications or products, or the application or use by customer's third party customer(s). Customer is responsible for doing all necessary testing for the customer's applications and products using NXP Semiconductors products in order to avoid a default of the applications and the products or of the application or use by customer's third party customer(s). NXP does not accept any liability in this respect. Right to make changes NXP Semiconductors reserves the right to make changes to information published in this document, including without limitation specifications and product descriptions, at any time and without notice. This document supersedes and replaces all information supplied prior to the publication hereof. Suitability for use NXP Semiconductors products are not designed, authorized or warranted to be suitable for use in life support, life-critical or safety-critical systems or equipment, nor in applications where failure or malfunction of an NXP Semiconductors product can reasonably be expected to result in personal injury, death or severe 1997 Apr 15 8 NXP Semiconductors Product specification CATV amplifier module BGY887B Limiting values Stress above one or more limiting values (as defined in the Absolute Maximum Ratings System of IEC 60134) will cause permanent damage to the device. Limiting values are stress ratings only and (proper) operation of the device at these or any other conditions above those given in the Recommended operating conditions section (if present) or the Characteristics sections of this document is not warranted. Constant or repeated exposure to limiting values will permanently and irreversibly affect the quality and reliability of the device. Quick reference data The Quick reference data is an extract of the product data given in the Limiting values and Characteristics sections of this document, and as such is not complete, exhaustive or legally binding. Non-automotive qualified products Unless this data sheet expressly states that this specific NXP Semiconductors product is automotive qualified, the product is not suitable for automotive use. It is neither qualified nor tested in accordance with automotive testing or application requirements. NXP Semiconductors accepts no liability for inclusion and/or use of non-automotive qualified products in automotive equipment or applications. Terms and conditions of commercial sale NXP Semiconductors products are sold subject to the general terms and conditions of commercial sale, as published at http://www.nxp.com/profile/terms, unless otherwise agreed in a valid written individual agreement. In case an individual agreement is concluded only the terms and conditions of the respective agreement shall apply. NXP Semiconductors hereby expressly objects to applying the customer's general terms and conditions with regard to the purchase of NXP Semiconductors products by customer. In the event that customer uses the product for design-in and use in automotive applications to automotive specifications and standards, customer (a) shall use the product without NXP Semiconductors' warranty of the product for such automotive applications, use and specifications, and (b) whenever customer uses the product for automotive applications beyond NXP Semiconductors' specifications such use shall be solely at customer's own risk, and (c) customer fully indemnifies NXP Semiconductors for any liability, damages or failed product claims resulting from customer design and use of the product for automotive applications beyond NXP Semiconductors' standard warranty and NXP Semiconductors' product specifications. No offer to sell or license Nothing in this document may be interpreted or construed as an offer to sell products that is open for acceptance or the grant, conveyance or implication of any license under any copyrights, patents or other industrial or intellectual property rights. Export control This document as well as the item(s) described herein may be subject to export control regulations. Export might require a prior authorization from national authorities. 1997 Apr 15 9 NXP Semiconductors provides High Performance Mixed Signal and Standard Product solutions that leverage its leading RF, Analog, Power Management, Interface, Security and Digital Processing expertise Customer notification This data sheet was changed to reflect the new company name NXP Semiconductors, including new legal definitions and disclaimers. No changes were made to the technical content, except for package outline and simplified outline drawings which were updated to the latest version. Contact information For additional information please visit: http://www.nxp.com For sales offices addresses send e-mail to: salesaddresses@nxp.com (c) NXP B.V. 2010 All rights are reserved. Reproduction in whole or in part is prohibited without the prior written consent of the copyright owner. The information presented in this document does not form part of any quotation or contract, is believed to be accurate and reliable and may be changed without notice. No liability will be accepted by the publisher for any consequence of its use. Publication thereof does not convey nor imply any license under patent- or other industrial or intellectual property rights. Printed in The Netherlands 127167/00/02/pp10 Date of release: 1997 Apr 15 Document order number: 9397 750 02118