Sensing Distance Amplifiers E3S-X3, E3X, E3XA, E3A2-X, E3XR, E3C-X Fiber-optic Cables Extensive Selection of Fiber-optic Sensing Heads Offers Many Unique Solutions for Tough Problems Fiber-optic sensors detect small, fast-moving objects in space-confined installations and harsh environments For a custom fit in the field, most plastic filament cables can be cut to length For detection in hard-to-reach places, sensing heads with bendable stainless steel tubing retain complex shapes Coiled and ultra-flexible cables are ideal for flexing and reciprocating machinery such as robots Periscope sensing heads or accessories save space in right angle detection Convergent beam sensing heads allow accurate positioning, even for shiny objects Narrow detection zone of concentric beam sensing heads helps eliminate background objects and gives consistant sensing, regardless of object direction Most fiber cables offer IP67 protection and temperature ratings of -40C to 70C (-40F to 158F) E32 E32 E32 Application Examples Detect small holes in machine parts Detecting presence of printed circuit board components Detects metal or non-metal chips within a sensing area as large as 2 x 11-mm Detects when tape roll has reached selected diameter Chips need not be in a straight line. Outputs a signal when selected diameter is reached. Sensor, used vertically, will detect object as tiny as 1.3 mm. Ordering Information THROUGH-BEAM TYPE General Purpose Part a Number u be Appearance ea a ce E32-T11 Cable Cab e Length e g Se s g Sensing Di t Distance Minimum u Obj t Size Object Si Fiber Material 2m 18 cm (7 in) 1 m (3.28 ft) with E39-F1 0.5 mm (0.02 in) dia. PMMA PE M4 threaded head x 11.7 mm (0.46 in) L E32-T11L Sheath 1.4 mm ID fiber 35 cm (13.8 in) 1 mm ID fiber 10 m 7 m (23 ft) 1 mm ID fiber Long distance 2m 5 cm (1.97 in) E32-T12L 3 mm dia. (0.12 in) x 14 mm (0.55 in) M4 threaded head x 23 mm (0.91 in) L E32-T21 M3 threaded head x 11 mm (0.43 in) L E32-T21L 10 cm (3.94 in) M3 threaded head x 9 mm (0.35 in) L E32-T22 E32-T22L 2 mm dia. (0.8 in) x 22 mm (0.87 in) E32-TC50 50 cm (19 in) E32-TC200 2 m (6.4 ft) E32-TC1000 M4 threaded head x 14 mm (0.55 in) L 5 m (16.4 ft) 10 m (32.8 ft) 0.2 mm (0.01 in) dia. Plastic extra flexible 0.5 mm ID fiber Ultra flexible cable PE 0.5 mm ID fiber 5 cm (2 in) 0.5 mm ID fiber Easy to align 10 cm (3.94 in) 0.5 mm ID fiber 20 0 cm c (7.88 ( 88 in)) 1 m (3.28 (3 28 ft) with E39-F1 lens kit 1 mm ID fiber be L Low cost, t generall purpose 2 mm dia. (0.8 in) x 22 mm (0.87 in) E32-TC500 1.5 mm ID fiber Ultra flexible cable 35 cm (13.8 in) 1 m (3.28 ft) with E39-F1 lens kit M4 threaded head x 11.7 mm (0.46 in) L E32-T17L Core Remarks e a s E32 Part a Number u be E32 Appearance ea a ce E32-TC200A Cable Cab e Length e g Sensing Se s g Di t Distance Minimum u Obj t Size Si Object Fiber Material 2m 12 cm (4.72 in) 0.2 mm (0.01 in) dia. PMMA PE Coiled 56.5 cm (22.2) L; 2 m extended 10 cm (3.9 in) 60 cm (2.0 ft) with E39-F1 lens kit 2m 3.5 cm (1.38 in) M3 threaded head x 12.5 mm (0.49 in) L E32-TC200C M4 threaded head x 11 mm (0.43 in) L E32-TC200E M3 threaded head x 11 mm (0.43 in) L Core Remarks e a s Sheath 1 mm ID fiber 0.5 mm ID fiber Easy to align Armored Type Part Number Appearance E32-UTAT1-3F E32-UTAT1-6F 5/16 -- 24 thread x 3.8 mm (1.5 in) L E32-UTBT1-3F* E32-UTBT1-6F* 5/16-- 24 thread x 38.1 mm (1.5 in) L Sensing g Di t Distance Minimum Obj t Size Object Si Fiber Material Core Sheath 0.91 m (3 ft) 20 cm (7.9 in) 0.2 mm (0.01 in) dia. Glass Stainless steel 1.83 m (6 ft) 17 cm (6.7 in) 0.91 m (3 ft) 40 cm (15.7 in) Cable Length g 0.25 mm (0.01 in) dia Remarks General purpose Can withstand tem eratures to temperatures 150C (302F) General purpose Can withstand temperatures to 200C (392F) 1.83 m (6 ft) *For use with E3JU-X only Probe Type Part Number Appearance 0.8 mm dia E32-T33-1 Cable Length g 2m Sensing g Di t Distance Minimum Obj t Size Object Si Fiber Material Core Sheath 15 mm (0.59 in) 0.15 mm (0.06 in) dia. PMMA PE 18 cm (7 in) 0.2 mm (0.01 in) dia. Remarks 0.25 mm ID fiber Ultra small sensing 3 mm dia E32-TC200B E32-TC200B4 th d d h d M4 threaded head E32-TC200D E32-TC200D4 M3 threaded head E32-TC200F4 Probe = 40 mm 0.56 m (3.3 m) e e e ded when extended 15 cm (5.9 in) 2m 5 cm (2 in) 1 mm ID fiber Probe = 90 mm Probe = 40 mm M4 threaded head E32-TC200F 1 mm ID fiber Probe = 90 mm 0.5 mm ID fiber Probe = 90 mm Probe = 40 mm E32 E32 THROUGH-BEAM TYPE, CONTINUED Side Beam Type Part Number Appearance E32-T14 Cable Length Sensing Distance Minimum Object Size Fiber Material Core Sheath 2m 90 cm (3 ft) 0.1 mm (0.004 in) dia. PMMA PE 12 cm (4.7 in) E32-T14L Remarks 1 mm ID fiber Built-in lens offers long sensing distance 1 mm ID fiber 3 mm dia. E32-T16 75 cm (29 in) ___ E32-T16P 20 cm (8 in) ___ 4.5 cm (1.8 in) 0.1 mm (0.004 in) dia. Maximum T Temperature t Sensing g Di t Distance Minimum Obj t Size Object Si Fiber Material 150C (302F) 15 cm (5.9 in) 1 mm (0.04 in) dia. PMMA PE 1.5 mm ID fiber 300C (572F) 15 cm (5.9 in) 1.5 m (4.9 ft) with E39-F1 lens 0.2 mm (0.01 in) dia. Glass 1 mm ID fiber Cable Cab e Length e g Se s g Sensing Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 10 mm (0.39 in) 0.5 mm (0.02 in) dia. PMMA PE 15 cm (6 in) 0.3 mm (0.01 in) dia. 60 cm (23.6 in) 0.9 mm (0.04 in) dia. Teflon 1 mm ID fiber Ideal for harsh chemical environments 500 mm 0.5 mm (0.02 in) dia. PVC Ideal for sensing silicon wafers Ultra-narrow beam E32-T24 1 mm dia. 1 mm ID fiber includes 0.5 mm and 1.0 mm slit masks 0.5 mm ID fiber 2 mm dia. High Temperature Type Part Number Appearance E32-T51 M3 threaded head E32-T61 M4 threaded head Core Remarks Sheath SUS 304 Special Purpose Type Part a Number u be Appearance ea a ce E32-G14 2m Remarks e a s 1 mm ID fiber Ideal for mark sensing or belt alignment 10 mm E32-M21 0.5 mm ID fiber Use with E3XA-CC4A for shape recognition M3 threaded head E32-T12F 5 mm dia. E32-T22S 3.0 mm dia. E32-T24S E32-T84S 3.5 x 3 mm dia. 350 mm 450-480 mm Side-view Ideal for sensing silicon wafers Ultra-narrow beam 0.3 mm Glass SUS 304 Angled head ideal for sensing silicon wafers E32 E32 DIFFUSE TYPE General Purpose Part a Number u be Appearance ea a ce E32-CC200 Cable Cab e Length e g Sensing Se s g Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 2m 7.5 cm (3 in) 0.03 mm (0.001 in) dia. PMMA PE Remarks e a s 1 mm ID fiber Concentric beam M6 threaded head x 20 mm (0.79 in) L E32-D11 4.5 cm (1.8 in) 0.25 mm ID fiber Ultra-flexible cable M6 threaded head x 17 mm (0.67 in) L E32-D11L 10 cm (4 in) 0.015 mm (0.0006 in) dia. 1 mm ID fiber Long distance 0.7 cm (0.28 in) 0.03 mm (0.001 in) dia. 0.25 mm ID fiber Ultra-flexible cable M6 threaded head x 17 mm (0.67 in) L E32-D21 M3 threaded head x 11 mm (0.43 in) L E32-D21L 2.5 cm (1 in) 0.5 mm ID fiber M4 threaded head x 12 mm (0.47 in) L E32-D22L . 3 mm (0.12 in) dia. x 15 mm (0.59 in) L E32-D32 2 cm (0.79 in) 0.25 mm ID fiber Concentric beam 2 mm dia. E32-D32L 4 cm (1.57 in) 0.04 mm (0.002 in) dia. Long distance Concentric beam 7.5 5 ccm (3 in)) 0 0 5 mm 0.015 (0 0006 iin)) di (0.0006 dia. 1 mm ID fiber be L Low cost, t generall purpose ur ose 0.64 m 2.49 m when extended 7.5 cm (3 in) 0.03 mm (0.001 in) dia. 1 mm ID fiber 2m 1.8 cm (0.71 in) 3 mm dia. E32-DC50 0.5 m (19 in) E32-DC200 2 m (6.4 ft) E32-DC500 E32-DC1000 M6 threaded head x 12 mm (0.47 (0 47 in) L E32-DC200C M6 threaded head x 17 mm (0.67 in) L E32-DC200E 5 m (16.4 ft) 10 m (32.8 ft) M3 threaded head x 11 mm (0.43 in) L 0.5 mm ID fiber Armored Type Part a Number u be Appearance ea a ce E32-UDAT1-3F E32-UDAT1-6F 5/16 -- 24 thread x 38.1 mm (1.5 in) L E32-UDBT1-3F* E32-UDBT1-6F* 5/16 -- 24 thread x 38.1 mm (1.5 in) L *For use with E3JU-X only Se s g Sensing Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 0.91 m (3 ft) 8 cm (3.1 in) Glass 1.83 m (6 ft) 6.5 cm (2.6 in) 0.03 mm (0 001 in) dia. (0.001 dia Stainless steel 0.91 m (3 ft) 9 cm (3.5 in) 1.83 m (6 ft) 8 cm (3.1 in) Cable Cab e Length e g 0.05 mm. (0.002 in) dia Remarks e a s General purpose Can withstand temperatures to 150C (302F) General purpose Can withstand temperatures to 200C (392F) E32 E32 DIFFUSE TYPE, CONTINUED Probe Type Part a Number u be Appearance ea a ce E32-D33 3 mm dia. Cable Cab e Length e g Sensing Se s g Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 2m 5 mm (0.2 in) 0.015 mm (0.0006 in) dia. PMMA PE 7.5 cm (3 in) 0.03 mm (0.001 (0 00 in)) dia. da 0.8 mm dia. E32-DC200B M6 threaded head 0.25 mm ID fiber Ultra small sensing 1 mm ID fiber Probe = 90 mm E32-DC200B4 Probe = 40 mm E32-DC200D E32-DC200D4 Remarks e a s M6 threaded head E32-DC200F 0.64 m (2.49 when extended) t d d) 2.2 cm (0.87 in) 2m 1.8 cm (0.71 in) No cable 3 cm (1.2 in) 1 mm ID fiber Probe = 90 mm Probe = 40 mm 0.5 mm ID fiber Probe = 90 mm M3 threaded head E32-DC200F4 E32-DC9G E32-DC9G4 Probe = 40 mm N/A 1 mm ID fiber Probe = 90 mm Probe = 40 mm 1.2 mm dia. Side Beam Type Part a Number u be E32-D14L E32-D24 Appearance ea a ce 6 mm dia. Cable Cab e Length e g 2m Se s g Sensing Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 4 cm (1.6 in) 0.03 mm (0.001 in) dia. PMMA PE 1 mm ID fiber 0.5 mm ID fiber 1.5 cm (0.6 in) 2 mm dia. 3 mm dia. Remarks e a s High Temperature Type Part Number Appearance E32-D51 Maximum T Temperature t Sensing g Di t Distance Minimum Obj t Size Object Si Fiber Material 150C (302F) 6 cm (2.4 in) 0.03 mm (0.001 in) dia. PMMA PE 1.5 mm ID fiber 300C (572F) 4.5 cm (1.8 in) Glass 1.4 mm ID fiber 400C (752F) 3 cm (1.2 in) Core Remarks Sheath M6 threaded head E32-D61 SUS 304 M6 threaded head E32-D73 1.25 mm dia. M4 threaded head 1 mm ID fiber E32 E32 Convergent Type and Special Purpose Se s g Sensing Di t Distance Minimum u Obj t Size Object Si Fiber Material Core Sheath 5 cm (2 in) 0.03 mm (0.01 in) dia. PMMA Teflon 1 mm ID fiber Ideal for harsh chemical environments E32-L24L 4 2 mm (0.16 0.07 in) 0.15 mm (0.006 in) dia. PE Side view Convergent beam Ideal for sensing silicon wafers E32-L25 3.3 mm ((0.13 in)) 0.25 mm ((0.01 in)) dia. 7.2 1.8 mm (0.28 0.07 in) 0.15 mm (0.006 in) dia. Part a Number u be Appearance ea a ce E32-D12F Cable Cab e Length e g 2m 6-mm dia. Convergent beam g Ideal for sensing ili f silicon wafers E32-L25A E32-L25L Remarks e a s RETROREFLECTIVE TYPE Special Purpose Part Number Appearance E32-R16 Reflector E39-R1 E32-R21 M6 threaded head Reflector E39-R3 Cable L Length th Sensing g Di t Distance Minimum Obj t Size Object Si Fiber Material Core Sheath 2m 15 to 150 cm (5.91 to 59.05 in) with E39-R1 reflector 0.03 mm (0.001 in) dia. PMMA PE 1 to 25 cm (0.39 to 9.84 in) with E39-R3 reflector Remarks For detection of shiny transparent or opaque objects E39-R1 included For detection of shiny transparent or opaque objects E39-R3 included E32 E32 Specifications FIBER UNIT Through-beam (Separate) Sensors Part Number Operating Ambient Temperature Operating Ambient Humidity Permissible Bending Radius Sheath Material Enclosure Rating E32-M21 --40C to 70C (--40F to 158F) with ith no icing i i 35% to 85% 25 mm min. Black polyethylene IEC IP67 4 mm min. Vinyl chloride E32-T11 E32-T11L 25 mm min. Black polyethylene E32-T12F --30C to 70C (--22F to 158F) with no icing 40 mm min. Teflon-covered black polyethylene E32-T12L --40C to 70C (--40F to 158F) with ith no icing i i 25 mm min. Black polyethylene E32-T16P 10 mm min. Vinyl chloride IEC IP50 E32-T17L 25 mm min. Black polyethylene IEC IP67 E32-T21 4 mm min. Vinyl chloride E32-T21L 25 mm min. Black polyethylene E32-T14 E32-T14L E32-T16 E32-T22 E32-T22L E32-T24 E32-T51 --40C to 150C* (--40F to 302F) with no icing 35 mm min. Fluoride resin E32-T61 --40C to 300C (--40F to 572F) with no icing 25 mm min. SUS E32-TC200 --40C to 70C (--40F to 158F) with ith no icing i i E32-TC200A E32-TC200B E32-TC200B4 E32-TC200C E32-TC200D E32-TC200D4 E32-TC200E E32-TC200F E32-TC200F4 *When used continuously between --40C and 130C (--40F and 266F) Black polyethylene E32 E32 Reflective Sensors Part Number Differential Travel Operating Ambient Temperature Operating Ambient Humidity Permissible Bending Radius Material Enclosure Rating E32-CC200 20% of max. detection sensing distance (Adjust(Adjust able in a range of 0% to 20% when the E3X-H11 is used.) --40C to 70C ( 40F to 158F) (--40F with no icing 35% to 85% 25 mm min. Black polyethylene IEC IP67 4 mm min. Vinyl chloride 25 mm min. Black polyethylene --30C to 70C (--22F to 158F) with no icing 40 mm min. Teflon-covered black polyethylene* --40C to 70C ( 40F to 158F) (--40F with no icing 25 mm min. Black polyethylene 4 mm min. Vinyl chloride 25 mm min. Black polyethylene E32-D11 E32-D11L E32-D12F E32-D14L E32-D21 E32-D21L E32-D22L E32-D24 E32-D32 E32-D32L E32-D33 E32-D51 --40C to 150C (--40F to 302F) with no icing** 35 mm min. Fluoride resin E32-D61 --40C to 300C (--40F to 572F) with no icing 25 mm min. SUS E32-D73 --40C to 400C (--40F to 752F) with no icing E32-DC200 E32-DC200B E32-DC200B4 E32-DC200C E32-DC200D E32-DC200D4 E32-DC200E E32-DC200F E32-DC200F4 E32-DC9G E32-DC9G4 --40C to 70C (--40F to 158F) with no icing E32-L24L*** --40C to 105C (--40F to 221F) with no icing Black polyethylene 10 mm min. (average at 10% decrease of sensing distance) Reinforced polyethylene IEC IP50 *Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin. **When used continuously between --40C and 130C (--40F and 266F) ***Beam size: 2 mm dia. E32 E32 Part Number Differential Travel Operating Ambient Temperature Operating Ambient Humidity Permissible Bending Radius Material Enclosure Rating E32-L25 20% of max. detection sensing distance (Adjustable in a range of 0% to 20% when the E3X-H11 is used.) --40C to 70C (--40F to 158F) with no icing 35% to 85% 25 mm min. Black polyethylene IEC IP50 --40C to 105C (--40F to 221F) with no icing 10 mm min. (average at 10% decrease of sensing distance) Reinforced polyethylene E32-R16 E39-R1 --25C to 55C (--13F to 131F) with no icing 25 mm min. Black polyethylene E32-R21 E39-R3 --40C to 70C (--40F to 158F) with no icing E32-L25A E32-L25L*** IEC IP66 IEC IP67 *Teflon is a registered trademark of the Dupont Company and the Mitsui Dupont Chemical Company for their fluoride resin **When used continuously between --40C and 130C (--40F and 266F) ***Beam size: 2 mm dia. Fine Through-beam Sensors Part Number Beam Size Differential Travel Horizontal Positioning Accuracy Operating Ambient Temperature Operating Ambient Humidity Permissible Bending Radius* Material Enclosure Rating E32-T22S 13 mm dia. (at a distance of 200 mm) --- --- --40C to 70C (--40F to 158F) with no icing 35% to 85% 10 mm min. Reinforced laminated vinyl chloride IEC IP67 25 mm min. SUS E32-T24S E32-T84S --40C to 200C (--40F to 392F) with no icing *Average at 30% of sensing distance Slot Sensors Part Number Operating Ambient Temperature Operating Ambient Humidity Permissible Bending Radius Material Enclosure Rating E32-G14 --40C to 70C (--40F to 158F) with no icing 35% to 85% 25 mm min. Black polyethylene IEC IP67 E32 E32 Engineering Data EXCESS GAIN RATIO Through-beam Type E32-T22 E32-T21L, E32-T22L E32-T11L, E32-T12L 6 Sensing distance Sensing distance Excess gain ratio Excess gain ratio Excess gain ratio 5 W/E3X-A E3X-A E3X-F Operating level 4 3 E3X-A 2 E3X-F 1 E3X-VG Operating level E3X-VG 0 Sensing distance (mm) Sensing distance (mm) E32-TC200E, E32-TC200F E32-TC200F4 200 Operating level 400 600 800 1000 Sensing distance (mm) E32-T21 E32-TC50/200/500/1000, E32-TC200A, E32-TC200B, E32-TC200B4 Excess gain ratio Excess gain ratio Excess gain ratio 100 50 30 10 5 1 Operating level Operating level Operating level 0 20 40 60 80 100 120 Sensing distance (mm) Sensing distance (mm) E32-TC200 + E39-F1 E32-TC200 + E39-F2 Sensing distance (mm) E32-T11 100 50 Excess gain ratio Operating level Excess gain ratio Excess gain ratio 30 10 Operating level 5 1 Operating level 0 Sensing distance (m) Sensing distance (mm) 50 100 150 200 250 300 350 400 Sensing distance (mm) E32 E32 E32-UTAT1-3F E32-UTAT1-6F 100 50 6 10 5 1 Excess gain ratio 30 30 Excess gain ratio Excess gain ratio E32-T17L 100 50 10 5 1 Operating level Operating level 0 50 100 150 200 250 300 350 0 50 Sensing distance (mm) 100 150 200 Sensing distance 5 4 3 2 1 250 0 300 350 5 Sensing distance (mm) Excess gain ratio 15 20 25 Sensing distance (m) E32-T24 Excess gain ratio E32-TC200B E32-TC200B4 Excess gain ratio E32-M21 10 E3X-A Operating level Operating level Sensing distance (mm) Sensing distance (mm) E32-T14L E32-T14 Sensing distance (mm) E32-T16 4 3 E3X-A 2 E3X-F Excess gain ratio 5 Excess gain ratio Excess gain ratio 6 1 E3X-VG 0 Operating level 50 100 200 250 Sensing distance (mm) 300 Sensing distance (mm) Sensing distance (cm) 30 E32 E32 E32-T51 E32-T61 E32-T12F Excess gain ratio Excess gain ratio Excess gain ratio 6 E3X-A Sensing distance 5 4 3 E3X-A 2 E3X-F Operating level Operating level 1 E3X-VG 0 Sensing distance (mm) Operating level 40 Sensing distance (mm) 80 120 160 200 Sensing distance (mm) Diffuse Type E32-D32, E32-DC9G E32-D21L, E32-D22L E32-D21 100 Excess gain ratio 50 Sensing object Excess gain ratio Excess gain ratio Sensing distance E3X-A Operating level E3X-F E3X-VG 30 10 5 1 Operating level Operating level 0 Sensing distance (mm) 4 6 10 12 14 16 E32-D11L 6 30 5 Excess gain ratio 100 50 10 5 1 Sensing distance Sensing object 4 3 2 E3X-F Operating level Operating level 8 Sensing distance (mm) E32-D11 Excess gain ratio E32-DC50, E32-DC200, E32-DC500, E32-DC1000 Excess gain ratio 2 Sensing distance (mm) E3X-A 1 E3X-VG 0 Sensing distance (mm) 10 20 30 40 50 Sensing distance (mm) 60 70 0 40 Operating level 80 120 Sensing distance (mm) 160 200 E32 E32 E32-UDAT1-6F 30 30 Excess gain ratio 100 50 Excess gain ratio 100 50 10 5 1 E32-D33 Excess gain ratio E32-UDAT1-3F 10 5 1 Operating level Operating level Operating level w/E3X-A 50 100 150 200 0 50 Sensing distance (mm) 100 150 200 Sensing distance (mm) E32-D24 Sensing distance (mm) E32-D14L E32-D51 6 Excess gain ratio Excess gain ratio Sensing distance 5 4 3 E3X-A 2 E3X-F Operating level 1 E3X-VG 0 Sensing distance (mm) E32-D61 Excess gain ratio 0 40 Operating level 80 120 160 200 Sensing distance (mm) Sensing distance (mm) E32-D73 E32-D12F 6 Sensing distance Operating level Excess gain ratio E3X-A Excess gain ratio Excess gain ratio 5 Sensing object 4 3 2 E3X-F Operating level 1 E3X-VG 0 Sensing distance (mm) Sensing distance (mm) 40 E3X-A Operating level 80 120 Sensing distance (mm) 160 200 E32 E32 Retroreflective Type E32-L25, E32-L25A E32-R21 Operating level Excess gain ratio E32-R16 Excess gain ratio Excess gain ratio Convergent Type 0.1 0 Set distance (mm) Sensing distance (mm) 1 2 OPERATING RANGE Through-beam Type Operating position Y (mm) Operating range with E3X-A11 amplifier Operating position Y (mm) E32-T11L + E39-F3 4 E3X-A 3 2 E3X-F 1 X Y 0 1 2 Set distance X (mm) 3 4 E32-T14 with E3X-A11 amplifier E32-T16 with E3X-A11 amplifier Setting range (mm) E32-T22, E32-T24 with E3X-A11 amplifier Operating position Y (mm) With E3X-A: Adjust the angle of E39-F3 so that the sensor can detect an object at a distance of 90 mm. (For E3X-F: 50 mm). Operating position Y (mm) Note: 3 Sensing distance (m) 4 E32 E32 E32-M21 with E3X-A11 amplifier Setting range (mm) Operating position Y (mm) E32-T51, E32-T61 with E3X-A11 amplifier Diffuse Type Operating position Y (mm) E32-D21L, E32-D22L X E3X-VG E3X-F Y E3X-A Set distance X (mm) E32-D11L Operating position Y (mm) E3X-F E3X-VG Y Set distance X (mm) E32-DC200C Operating range with E3X-A11 amplifier 3.0 (0.118) Parallel offset Y 2.0 (0.079) 1.0 (0.039) Detecting distance X 0 1.0 (0.039) Detectable object 2.0 (0.079) 3.0 (0.118) 8 (0.316) 16 (0.630) 24 (0.945) Detecting distance X [mm (inch)] with 5 x 5 cm (2 x 2 in) 90% reflective mat paper Operating position Y (mm) Parallel offset Y [mm (inch)] X E3X-A E32-DC50 E32-DC200 E32-DC200B E32-CC200 E32 E32 E32-D12F Operating position Y (mm) 16 E3X-A 12 8 E3X-VG X Y E3X-F 4 0 20 40 60 80 4 8 100 Set distance X (mm) 12 16 E32-UDAT1-3F with E3X-A amplifier E32-D24, E32-D32, E32-D33 E32-UDAT1-3F 10 5 0 Sensing distance X (mm) 60 30 5 120 90 E32-UDAT1-6F 10 Operating position Y (mm) Operating position Y (mm) 20 15 52 20 Set distance X (mm) Operating position Y (mm) E32-D14L X E3X-A E3X-VG E3X-F Set distance X (mm) Operating position Y (mm) E32-D51, E32-D61, E32-D73 E32-D51 Y E32 E32 Retroreflective Type E32-L25, E32-L25A E32-R21 with E3X-A11 amplifier Set range (mm) Operating position Y (mm) Convergent Type Set distance (mm) Sensing distance (mm) Dimensions Unit: mm (inch) THROUGH-BEAM TYPE (Sold in pairs) General Purpose E32-T11 Sensing head (nickel-plated Sixteen, brass) Two hexagon clamping nuts 0.265 M4 x 0.7 Two toothed washers (0.01) dia. Optical fiber, 2.2 (0.086) dia. Protective tube M2.6 x 0.45 3.2 2.4 3.3 14 (0.55) 7 (0.28) 15 2 m (6.56 ft.) E32-T11L 1.4 (0.06) dia. 3.2 7 (0.28) Two hexagon clamping nuts (T = 2.4) Two toothed washers (for M4) Sensing head Optical fiber, 2.2 (0.086) dia. (nickel-plated brass) M4x0.7 M2.6 x 0.45 3 (0.12) 11 2 m (6.56 ft.) 14 (0.55) E32-T12L 1.4 dia. 2.4 dia. (0.09) Sensing head (nickel-plated brass) 3 dia. 3 Optical fiber, 2.2 (0.086) dia. 11 14 (0.55) 2 m (6.56 ft.) E32 E32 E32-T17L Sensing head (ABS) M14 x 1 Two hexagon clamping nuts 10-mm dia. lens (PMMA) Optical fiber, 2.2 (0.086) dia. 5 19 (0.75) 23 42 10 m (32.8 ft.) E32-T21 Sensing head (nickel-plated brass) M3 x 0.5 Two hexagon clamping nuts Two toothed washers Protective tube Optical fiber, 1 dia. Four, 0.25 (0.01) dia. 11 (0.43) 5.5 (0.22) 10 15 1.8 2.5 Fiber attachment (E39-F9) 25 (0.99) 2 m (6.56 ft.) E32-T21L Two hexagon clamping nuts Two toothed washers Sensing head M3 x 0.5 (nickel-plated brass) Optical fiber, 1 dia. 0.9 (0.04) dia. 1.7 (0.07) 2.5 5.5 (0.22) Fiber attachment (E39-F9) 25 (0.99) 10 1.8 11 (0.04) 2 m (6.56 ft.) E32-T22 0.5 dia. Sensing head 1.4 dia. SUS303 17 22 (0.86) 2 (0.08) dia. Heat-shrinkable tubing 25 (0.99) Optical fiber, 1 dia. 10 Fiber attachment (E39-F9) 12 2 m (6.56 ft.) E32-T22L 0.9 dia. 1.8 (0.07) dia. 2 (0.07) Sensing head, 2 dia. (stainless) Heat-shrinkable tubing Optical fiber, 1.0 dia. 17 22 (0.86) 12 2 m (6.56 ft.) Fiber attachment (E39-F9) 25 (0.99) 10 E32 E32 E32-TC50, E32-TC200, E32-TC500, E32-TC1000 1.0 (0.04) dia. Two hexagon clamping nuts Two toothed washers Sensing head M4 x 0.7 (nickel-plated brass) M2.6 x 0.45 Optical fiber, 2.2 dia. 2.4 3 3.2 14 (0.55) 7 (0.28) * 2 m (6.56 ft.) * This length is 50 cm for E32-TC50, 5 m for E32-TC500 and 10 m for E32-TC10000. E32-TC200A Two hexagon clamping nuts Two toothed washers Sensing head M3 x 0.5 (nickel-plated brass) 1.0 (0.04) dia. 2.6 dia. 3 dia. 5.5 (0.22) 1.8 7 (0.28) 14 (0.55) 1.5 Optical fiber, 2.2 dia. 2 m (6.56 ft.) E32-TC200C Two hexagon clamping nuts 1.0 (0.04) dia. 3 (0.12) 22 (0.87) dia. Optical fiber, 2.2 dia. 2.4 7 (0.28) 75 (3.0) Two toothed washers M4x0.7 (nickelplated brass) Sensing head M2.6 x 0.45 11 (0.43) 90 (3.54) 400 (15.8) 2 m (6.56 ft.) when straight E32-TC200E Two hexagon clamping nuts Fiber attachment (E39-F9) Two toothed washers 0.5 (0.02) dia. Sensing head M3 x 0.5 (nickel-plated brass) Optical fiber, 1 dia. 2.5 (0.10) 5.5 (0.22) 25 (0.99) 10 1.8 11 (0.43) 2 m (6.56 ft.) Armored Type E32-UTAT1-3F E32-UTAT1-6F 12.7 (0.5) (5/16 -- 24) thread (Stainless Steel) 5.1 (0.2) (Stainless Steel) (ABS) (Stainless Steel) O8.0 (0.315) O5.0 (0.197) O2.2 (0.087) 4.0 (0.157) 4.0 (0.157) O1.27 (0.05) (Fiber Bundle) 38.1 (1.5) 50.8 (2) 5.0 (0.197) 17.0 (0.669) A 15.0 (0.59) B L Note: Distance A can withstand 150C (302F); Distance B can withstand 70C (158F); L=3ft. or 6ft. E32 E32 E32-UTBT1-3F E32-UTBT1-6F O7.1 (0.281) (5/16 -- 24) thread (Brass) 12.7 (0.5) 5.9 (0.234) (Stainless Steel) (Stainless Steel) O4.7 (0.187) 12.7 (0.5) 15.2 (0.6) 0.9 (0.035) O3.2 (0.125) (Fiber Bundle) 38.1 (1.5) 25.4 (1.0) A B L Note: Distance A can withstand 200C (392F); Distance B can withstand 70C (158F); L=3ft. or 6ft. Probe Type E32-T33-1 Two, 0.25 (0.01) dia. Sensing head (SUS303) 0.8 3 (0.12) dia. (0.03) dia. 15 15 Heat-shrinkable tubing Optical fiber, two, 1 (0.04) dia. 25 (0.98) 10 12 35 (1.38) 2 m (6.56 ft.) E32-TC200B E32-TC200B4 1.0 (0.04) dia. Stainless tube 1.2 dia. (SUS304) max. Two hexagon clamping nuts Two toothed washers Sensing head M4 x 0.7 (nickel-plated brass) 2.4 3.2 7 (0.28) 11 90 (3.5) [40 (1.57)] (see note) Optical fiber, 2.2 (0.086) dia. 2 m (6.56 ft.) Note: The values in the brackets are for the E32-TC200B4. E32-TC200D E32-TC200D4 Two hexagon clamping nuts Two toothed washers Stainless tube 1.0 dia. 1.2 (SUS304) dia. max. 3.2 7 22 (0.87) dia. Optical fiber, 2.2 dia. 2.4 11 90 (3.5) [40 (1.57)] See note 75 Sensing head M4 x 0.7 (nickel-plated brass) 90 (3.53) 2m (6.56ft.) when straight Note: The values in the brackets are for the E32-TC200D4. 400 (15.8) Fiber attachment (E39-F9) E32 E32 E32-TC200F E32-TC200F4 Two hexagon clamping nuts 0.5 (0.02) dia. Stainless tube (SUS304) 0.9 dia. min. 2.5 (0.10) Two toothed washers Sensing head M3 x 0.5 (nickel-plated brass) Optical fiber, 1 dia. 1.8 90 11 (3.5) (0.43) [40 (1.57)] (See note) 5.5 (0.22) Fiber attachment (E39-F9) 25 (0.99) 10 2 m (6.56 ft.) Note: The values in the brackets are for the E32-TC200F4. Side Beam Type E32-T14 Lens unit (PMMA) 4.4 dia. Heat resistive ABS 8.2 7 (0.28) Optical axis R3.5 10.5 7 Optical fiber, 2.2 (0.086) dia. Two, 3.2 dia. 8 10 0.2 2.5 9.2 16 (0.63) 11.2 2m (6.56 ft.) E32-T14L Sensing head, 3 dia. Heat-shrinking tubing (stainless) 45 Optical fiber, 2.2 (0.086) dia. 2.8 3 (0.12) dia. 1.5 1 1.5 30 (1.18) 35 (1.38) Sensing surface 12 2 m (6.56 ft.) E32 E32 E32-T16 20 (0.79) 4 3.2 10.2 Two, R2 0.5-mm (0.02) Wide Slit Seal (Sold in Pairs) 6 (0.23) Mounting Holes 4 2 (0.79) 0.5 20 4 Sensing head (ABS) 15.5 (0.61) 8.85 Two, (R) 1.2 Two, (R) 4.5 8.4 3 Two, M3 11 (0.43) 15 23 (0.90) 2.3 5.5 3.2 25 27 (1.06) 20 Lens (2 x 10) Black 1-mm (0.04) Wide Slit Seal (Sold in Pairs) 6 1 58 6 dia. 4 43.2 Two, 3.2 (0.16) dia. 2m (6.56 ft.) 23 (0.90) Mounting bracket E39-L4 15 Black Fiber 2.2 (0.08) dia. 33 (1.30) E32-T16P E32-T16P + E39-L94 Mounting Two, 3.2 dia., 6 dia counter sinking 14.5 (0.57) 0.5-mm (0.02) wide Seal Slit (Two slits are provided) 4 (0.15) 3.4 (0.13) 10.7 2 0.5 (0.02) 19 (0.75) 13.4 27 (1.06) 20 (0.79) 4 35 (1.38) 20 (0.79) 4 4.8 Two, M3 Sensing head (2 x 11) (PMMA) 4 26.4 (1.04) Black 12.2 (0.48) Sensing head (heat-resistive ABS) 1-mm (0.04) wide Seal Slit (Two slits are provided) Sensing head 3.4 (0.13) 2m (6.56 ft.) 1 2.2 (0.09) dia. optical fiber 52 (2.04) 20 (0.79) 3.2 (0.13) 19 (0.75) 4 43.2 (1.7) 13.4 26.4 (1.04) Black 2.2-dia. fiber 23.2 E39-L94 Mounting Bracket (0.91) (sold separately) E32 E32 E32-T24 45 1 0.5 Fiber attachment (E39-F9) Sensing head 1 (0.04) dia. SUS304 2 (0.07) dia. Protective tube 1.4 dia. Optical fiber, 1 dia. 1.5 15 15 (0.59) 25 (0.99) 10 (0.39) 12 2 m (6.56 ft.) 35 (1.38) High Temperature Type E32-T51 Two hexagon clamping nuts Two toothed washers Sensing head M4 x 0.7 (nickel-plated brass) 1.5 (0.06) dia. 2.85 dia. 7 (0.28) 2.4 Optical fiber, 2.2 dia. 15 17 (0.67) 1 2 m (6.56 ft.) Note: Resistant temperature is 150C (302F). Resistant temperature is 130C (266F) when used continuously. E32-T61 1.0 (0.04) dia. 7 (0.28) Two hexagon clamping nuts Two toothed washers SUS flexible tube Sensing head M4 x 0.7 (SUS303) M2.6 x 0.45 3 2.4 20 (0.79) 2.8 dia. Hexagon clamping screw 4 dia. 5 dia. Sleeve (See note) 4 dia. 10 5 2 m (6.56 ft.) A 13 (0.51) 28 (1.10) B Note: Section A resists 300C and section B (which is inserted to the amplifier) resists 110C. The operating temperature of section B must also be within the withstand temperature range of the amplifier. Special Purpose E32-G14 Sensing head (ABS) 36.3 (1.43) 25.2 (0.99) 20 (0.79) 9.2 22 (6.56 ft.) R1.6 R1.6 Mounting Holes Two, M3 Lens (PMMA) R3.5 24 10 (0.95) 4 7.4 (0.29) 7.0 Optical axis 3.2 9.0 (0.35) 9.4 (0.37) 1.6 23.5 (0.92) 1.6 9.4 (0.37) Optical fiber 2.2 (0.86) dia. E32 E32 E32-M21 Sensing head M3 x 0.35 (SUS303) Two hexagon clamping nuts Two toothed washers Silicone tube Plastic fibers, four, 1 (0.04) dia. Sleeve 13 28 (1.10) 1.8 2 m (6.56 ft.) 11 23 (0.90) Note: One set of silicone tubes is black while the other set is gray for easy identification when they are connected to the light source and receiver. E32-T12F 4-mm (0.16) dia. lens Sensing head, 5 dia. Fluoride resin 4 dia. 20 Optical fiber, 2.2 (0.086) dia. 100 (3.93) 2 m (6.56 ft.) E32-T22S Sensing head (nickel-plated brass) 1.7 dia. Optical fiber, 2.2 (0.086) dia. 3 (0.12) dia. 15 (0.59) 2 m (6.56 ft.) E32-T24S 1.8 (0.07) 0.4 (0.02) Sensing head (nickel-plated brass) 3.5 dia. Optical fiber, 2.2 (0.086) dia. 11 (0.43) 3.2 17.6 (0.69) 3.2 3 Mounting bracket (attachment) 10 20.5 (0.81) 2 (0.08) dia. 2 (0.08) Sensing surface 2 m (6.56 ft.) E32 E32 E32-T84S A 14.2 (0.56) R8 3 (0.12) 4 4 2.9 mm SUS 304 90 B 20 (0.79) 15 (0.59) 2.000 (78.74) 12 (0.47) 13 (0.51) 5 2.2 mm dia. 3.5 (0.14) 3 DIFFUSE TYPE General Purpose E32-CC200 Sixteen, 0.25 (0.01) dia. for 1.0 dia. for light light reception emission 2.5 dia. 3 5.2 Two hexagon clamping nuts Two toothed washers Sensing head M6 x 0.75 (nickel-plated brass) 2.4 2 m (6.56 ft.) 23 (0.90) 10 Optical fiber, two, 2.2 dia. E32-D11 Sixteen, 0.265 dia.(0.01) Sensing head Two hexagon clamping nuts (SUS303) Two toothed washers (10 teeth) M6 X 0.75 Protective tube 5.2 2.4 10 (0.39) 15 17 (0.67) E32-D11L Optical fiber, two, 2.2 dia. 2 m (6.56 ft.) Two hexagon clamping nuts Two toothed washers Two, 1.4 dia. Sensing head (nickel-plated brass) M6 x 0.75 4 dia. Two optical fiber,2.2 dia. 5.2 10 (0.39) 3 2.4 2 m (6.56 ft.) 20 (0.79) E32-D21 Sensing head (nickel-plated brass) M3 x 0.5 Two hexagon clamping nuts Two toothed washers Protective tube Four, 0.25 (0.01) dia. 2.5 Fiber attachment (E39-F9) 1.8 5.5 25 (0.98) Optical fiber, two, 1 dia. 15 11 (0.43) 2 m (6.56 ft.) 10 (0.39) E32 E32 E32-D21L Two fiber attachments (E39-F9) Two hexagon clamping nuts Two toothed washers Sensing head M4 x 0.75 (nickel-plated brass) Optical fiber, two, 1.0 dia. Two, 0.9 (0.04) dia. 2.4 3 3.2 25 (0.98) 10 (0.39) 7 (0.28) 2 m (6.56 ft.) 15 (0.59) E32-D22L Two fiber attachments (E39-F9) 25 (0.98) Two, 0.9 dia. 2.7 dia. Sensing head 3 dia. (nickel-plated brass) Optical fiber, two, 1 dia. 10 (0.39) 3 15 (0.59) 2 m (6.56 ft.) E32-D32 Two fiber attachments (E39-F9) Light source fiber 0.5 dia. Receive fiber (0.25 dia.) x 4 25 (0.98) Sensing head SUS303 2 (0.08) 3 (0.12) Heat-shrinkable dia. tubing dia. 2 15 (0.59) Optical fibers, two, 1 (0.04) dia. 10 (0.39) 12 2 m (6.56 ft.) 22 (0.87) E32-D32L 2 m (6.56 ft.) standard length Light source (1 dia.) Receive (0.265 dia.) x 16 15 (0.59) 15 (0.59) 400 (15.75) Sensing head, 3 dia (0.12). (stainless) Branching box, 6 dia. (heat-resistive ABS black resin) 1,570 (61.81) Optical fibers, two, 2.2 (0.09) dia. E32-DC50, E32-DC200, E32-DC500, E32-DC1000 Two, 1.0 dia. Two hexagon clamping nuts Two toothed washers Sensing head M6 x 0.75 (ADC) 4 (0.16) dia. Optical fiber,2.2 dia. 4.8 10 (0.39) 3 17 (0.67) 2.4 L Part number E32-DC50 E32-DC200 L 50 cm (19 in) 2 m (6.56 ft.) E32-DC500 5 m (16.3 ft.) E32-DC1000 10 m (32.8 ft.) E32 E32 E32-DC200C 150 (5.90) Two hexagon clamping nuts Two toothed washers Sensing head (nickel-plated brass) M6 x 0.75 Two, 1.0 dia. 22 dia. (0.87) 5.2 Optical fiber, 2.2 x 2 dia. 2.4 10 (0.39) 17 (0.67) 2 m (6.56 ft.) when straight 90 (3.54) E32-DC200E 400 (15.8) Two fiber attachments (E39-F9) Two hexagon clamping nuts Two toothed washers Sensing head M3 x 0.5 (SUS304) Two, 0.5 dia. Optical fiber, two, 1 dia. 2.5 (0.10) 25 (0.98) 10 (0.39) 1.8 11 (0.43) 5.5 (0.22) 2 m (6.56 ft.) Armored Type E32-UDAT1-3F E32-UDAT1-6F (ABS) (5/16 -- 24) thread (Stainless Steel) 12.7 (0.5) 5.1 (0.2) (Stainless Steel) (Stainless Steel) O8.0 (0.315) O5.0 (0.197) O2.2 (0.087) (Epoxy-filled PVC) 4.0 (0.157) 4.0 (0.157) O1.7 (0.066) (Fiber Bundle) 38.1 (1.5) 5.0 (0.197) 17.0 (0.669) 38.1 (1.5) 15.0 (0.59) 190.5 (7.5) 50.8 (2.0) A B L Note: Distance A can withstand 150C (302F); Distance B can withstand 70C (158F); L=3ft. or 6ft. E32--UDBT1--3F E32--UDBT1--6F 12.7 (0.5) (5/16 -- 24) thread (Brass) 5.9 (0.234) (Stainless Steel) (Stainless Steel) (PVC) O7.1 (0.281) O4.7 (0.187) 12.7 (0.5) 15.2 (0.6) 0.9 (0.035) 25.4 (1.0) O3.2 (0.125) (Fiber Bundle) 38.1 (1.5) 152.4 (6.0) 38.1 (1.5) A B L Note: Distance A can withstand 200C (392F); Distance B can withstand 70C (158F); L=3ft. or 6ft. E32 E32 Probe Type E32-D33 0.8 (0.03) dia. Two, 0.25 (0.01) dia. Sensing head (SUS303) 3 (0.12) dia. 15 (0.59) Heat-shrinkable tubing Optical fiber, two, 1 (0.04) dia. 25 (0.98) Fiber attachment (E39-F9) 10 (0.39) 12 (0.47) 15 (0.59) 35 (1.38) 2 m (6.56 ft.) E32-DC200B E32-DC200B4 Two, 1.0 dia. Two hexagon clamping nuts Two toothed washers Sensing head M6 x 0.75 (fine screw) Stainless tube 2.5 dia. (SUS304) max. Optical fiber,2.2 dia. 2.4 5.2 10 (0.39) 17 (0.67) 90 (3.54) [40 (1.57)] See note 2 m (6.56 ft.) Note: The values in the brackets are for the E32-DC200B4. E32-DC200D E32-DC200D4 Two, 1.0 (0.04) dia. Two hexagon clamping nuts Two toothed washers Sensing head M6 x 0.75 (SUS304) Stainless tube 2.5 dia. (SUS304) max. 150 (5.90) 22 dia. (0.87) Optical fiber, two, 2.2 dia. 90 (3.54) 2.4 5.2 10 (0.39) Note: 90 (3.54) [40 (1.57)] See note 17 (0.67) 400 (15.8) 2 m (6.56 ft.) when straight The value in the brackets is for the E32-DC200D4. E32-DC200F E32-DC200F4 Two, 0.5 (0.02) dia. Stainless tube (SUS304) 1.2 dia. min. 2.5 Two hexagon clamping nuts Two toothed washers Sensing head M3 x 0.5 (SUS304) Optical fiber, two, 1 dia. 1.8 5.5 (0.22) Note: 90 (3.5) [40 (1.57)] See note. 11 (0.43) 2 m (6.56 ft.) The values in the brackets are for the E32-TC200F4. Fiber attachment (E39-F9) 25 (0.98) 10 (0.39) E32 E32 E32-DC9G E32-DC9G4 Sleeve 1.2 (0.05) dia. max. 4 (0.16) Stainless tube 8 15 (0.59) Do not bend the stainless tube in this range. 10 (0.39) 7.5 90 (3.54) [40 (1.57)] See note 6 (0.24) 13 (0.51) 17 (0.67) Note: The values in the brackets are for the E32-DC9G4. Side Beam Type E32-D14L Sensing head (stainless) Optical fiber, two, 2.2 (0.09) dia. Heat-shrinkable tubing 45 5.7 6 (0.24) dia. 1.5 1 2 12 (0.47) 30 (1.18) 35 (1.38) Light baffle 2 m (6.56 ft.) Sensing surface E32-D24 Sensing head (SUS304) 2 (0.08) dia. 45 1 0.5 Light baffle 1.5 15 (0.59) Two fiber attachments (E39-F9) 3 (0.12) Heat-shrinkable dia. tubing 15 (0.59) 35 (1.38) Optical fibers, two, 1 (0.04) dia. 25 (0.98) 10 (0.39) 12 (0.47) 2 m (6.56 ft.) Sensing surface High Temperature Type E32-D51 Two hexagon clamping nuts Two toothed washers Sensing head,M6 x 0.75* Two, 1.5 dia. Optical fiber, 2.2 (0.09) d ia. 4.9 3.1 10 (0.39) 3 2.4 13 (0.51) 17 (0.67) 2 m (6.56 ft.) *nickel-plated brass Note: Resistant temperature is 150C (302F). Resistant temperature is 130C (266F) when used continuously. E32 E32 E32-D61 Two hexagon clamping nuts Two toothed washers 1.4 (0.06) dia. Sensing head (SUS303) M3 x 0.75 5 dia. 3.5 dia. M4 x 0.7 SUS flexible tube SUS304 Sleeve Hexagon clamping screw 8 10 (0.39) 3 6.5 5 3 2 2.4 20 (0.79) 2 m (6.56 ft.) 5 6.4 (0.25) B A Note: See note 13 16.5 (0.65) 15 (0.59) Section A resists 300C (572F) and section B (which is inserted to the amplifier) resists 110C (230F). The operating temperature of section B must also be within the withstand temperature range of the amplifier. E32-D73 Two hexagon clamping nuts Two toothed washers SUS flexible tube M4 x 0.7 (SUS303) 4 dia. 2.8 dia. Sensing head 1.25 dia. 2.5 dia. 1.65 dia. 1.0 (0.04) dia. SUS303 Hexagon clamping screw Sleeve 5 dia. 8 7 5 See note 5 2.4 5 10 20 (0.79) 60 (2.36) A Note: 2 m (6.56 ft.) B 6.5 16.5 (0.65) 13 (0.51) 15 (0.59) 6.4 (0.25) C Section A resists 400C (752F), section B resists 300C (572F) and section C (which is inserted to the amplifier) resists 110C (230F). The operating temperature of section C must also be within the withstand temperature range of the amplifier. Convergent Type and Special Purpose E32-D12F Sensing head, 6 (0.24) dia. Fluoride resin 5 (0.20) dia. Optical fiber, two, 2.2 (0.09) dia. 16 2 m (6.56 ft.) 100 (3.94) E32-L24L 4 (0.16) 3.6 (0.14) 18 (0.71) 3.3 3.3 20 (0.79) 1.5 Optical axis Side view prism (PC) Two fiber attachment (E39-F9) 4 25 (0.98) 6 6.5 (0.26) Sensing head (PC) Two, 3.2 dia, 6 dia. counter sinking Two, 1 dia. optical fibers 2m (6.56 ft.) 10 (0.39) E32 E32 E32-L25 20 (0.79) 5 10 (0.39) 4 Note: 4.8 6.5 White line 20 (0.79) 6.5 (0.26) Sensing head (ABS) Two, 3.2 dia., 6 dia. spot facing The fiber for the light source is identified by a white line. Optical fiber, two, 2.2 dia. 2 m (6.56 ft.) E32-L25A 5 20 (0.79) 4 10 4.8 6.5 (0.26) 6.5 (0.26) 20 (0.79) Sensing head (ABS) Two, 3.2 dia., 6 dia. spot facing 2m (6.56 ft.) White line Optical fiber, two, 2.2 dia. E32-L25L Two fiber attachment (E39-F9) 18 (0.71) 4 25 (0.98) 6 (0.24) 16 (0.63) Two, 1 dia. optical fibers 6.5 (0.26) Sensing head (PC) Two, 3.2 dia, 6 dia. counter sinking 2m (6.56 ft.) 10 (0.39) E32 E32 RETROREFLECTIVE TYPE Special Prupose E32-R16 Nameplate 15 (0.59) 27 (1.06) 7 (0.28) 13 (0.51) 10 (0.39) 3.2 (0.13) 7.2 6 15.2 (0.60) 1.5 16 1.5 (0.06) 3.2 4 8 21.5 (0.85) 21 (0.83) 160.2 Lens (PMMA) 17 1 (0.67) 22.5 (0.88) Optical fiber, two, 2.2 (0.09) dia. Standard length: 2 m Two, M3 screws (attachment) Mounting bracket (attachment) E32-R21 Lens (PMMA) Sensing head Two hexagon clamping nuts Two washers Silicone tube M6 x 0.75 Optical fibers, two, 1 dia. Two fiber attachments (E39-F9) 25 (0.98) 10 5 dia. 2.2 (0.09) 10 (0.39) 3 2.8 (0.11) 11 17.8 27.8 (1.09) 14 2 m (6.56 ft.) E32 E32 Installation CUTTING FIBER Insert a fiber into the Fiber Cutter and determine the length of the fiber to be cut. Press down the Fiber Cutter in a single stroke to cut the fiber. When the fiber is cut, an insertion mark is inscribed on the fiber. For a 2.2-mm dia. standard fiber only. 12.6 BENDING RADIUS E39-F11 Sleeve Bender The bending radius of the stainless tube should be as large as possible. The smaller the bending radius becomes, the shorter the sensing distance will be. Insert the tip of the stainless sleeve to the Sleeve Bender and bend the stainless sleeve slowly along the curve of the Sleeve Bender (refer to the figure). Insertion mark 1.2 dia. 1.2 dia. 1.3 dia. max. max. min. R 10 2.2-dia. R 12.5 Insert a fiber into the Fiber Cutter in the direction indicated by the arrow (refer to the following figure). R5 R 7.5 Fiber tip position mark 2 Stainless tube 1 The cutting holes cannot be used twice. If the same hole is used twice, the cutting face of the fiber will be rough and the sensing distance will be reduced. Always use an unused hole. Use either one of the two holes on the right (refer to the following figure) to cut a thin fiber as follows: 1. An attachment is temporarily fitted to a thin fiber before shipment. Temporarily fitted 2. Secure the attachment after adjusting the position of it in the direction indicated by the arrow. 3. Insert the fiber into the E39-F4 to cut. Cutter E39-F4 Two holes for thin fiber Three holes for standard fiber (2.2 mm dia.) Note: Insert the fiber in the direction indicated by the arrow. 90o max. 10 10 Do not bend here. E32 E32 FIBER UNITS WITH 90 BEND IN STAINLESS STEEL TUBE Stainless Steel Tube with a 90 Bend at the Base Length Applicable Models 2 R E32-TC200B/TC200F/DC200F Appearance Stainless Steel Tube with a 90 Bend at the Tip Length 1 R Bending radius 1 (1) R 5.0 10.0 mm 15.0 mm R 7.5 12.5 mm 17.5 mm R 10.0 15.0 mm 20.0 mm R 12.5 17.5 mm 22.5 mm Bending radius 1 (1) R 5.0 5.0 mm 10.0 mm R 7.5 7.5 mm 17.5 mm R 10.0 10.0 mm 20.0 mm R 12.5 12.5 mm 22.5 mm The length overall is 120 mm max. Note: If larger 2 is required, use the E39-F11 Sleeve Bender. The length overall is 120 mm max. Note: If larger 1 is required, use the E39-F11 Sleeve Bender. Sensing Distance for Tubes with 90 Bends Bending Radius Part Number Amplifier Standard R5.0 R7.5 R10.0 R12.5 E32-TC200B E3X-H11 400 mm 260 mm 330 mm 360 mm 400 mm E3X-A 180 mm 110 mm 140 mm 160 mm 180 mm E3X-H11 100 mm 55 mm 100 mm 100 mm 100 mm E3X-A 50 mm 30 mm 50 mm 50 mm 50 mm E3X-H11 36 mm 30 mm 36 mm 36 mm 36 mm E3X-A 18 mm 10 mm 18 mm 18 mm 18 mm E32-TC200F 3 C 00 E32-DC200F 3 C 00 FIBER UNIT WITH LONGER FIBER Applicable Models E32-TC200/-DC200 E32-TC200B/-DC200B E32-TC200E/-DC200E E32-TC200F/-DC200F E32-TC200A Seal E32-L25 (A) Wafer Sensor Insert the fiber with a white line into the light projection side of the Amplifier. The tightening force of the sensor head is 8 kgf cm (0.75 N m). Avoid places where water could be sprayed onto the E32-L25(A). Appearance The length can be ordered in increments of 1 m between 6 m min. and 20 m max.. (2-m and 5-m fiber length types are standard for E32-TC200, E32-DC200.) E32-T14/-G14 HANDLING E32-D51/-T51 Heat-resisting Fiber The bending radius of the fibers should be 35 mm min. Connecting fibers via the E39-F10 Fiber Connector is not possible. The withstand temperature of the Heat-Resisting Fibers is 150C max. In continuous operation, the ambient temperature should be 130C max. E32-T14/-T51 If the sensor is ON because some object in front of the lenses reflects light, attach the black seals (sold together) to the lenses. E32-T16 Slit Seal (Attachment) Peel the E32-T16 Slit Seal off the ground paper and affix the Slit Seal to the sensing face of the sensor so that the corners of the Slit Seal fit in with the corners of the sensing face. To sense an object at a distance of 30 cm max., a 0.5-mm wide Slit Seal must be used. E32-T16 Sensing Head Attachment slit E32 E32 ATTACHMENT UNITS Mounting panel Hexagon clamping nut Applications E39-F10 Fiber Connector Use the following procedure (refer to the figure) to connect fibers via the Fiber Connector. Fiber Unit Protective spiral tube Toothed washer Splice Use the attached saddle to secure the end cap of the Protective Spiral Tube. To secure the Protective Spiral Tube at a position other than the end cap, apply tape to the tube so that the portion becomes thicker in diameter. Retention Unit Retention Unit Each fiber should be as close as possible before they are connected. Sensing distance will be reduced by approximately 25% when fibers are connected. Only fibers with 2.2 mm dia. can be connected. Protective Spiral Tube Insert a fiber to the Protective Spiral Tube from the head connector side (screwed) of the tube. Fiber Unit Protective spiral tube Push the fiber into the Protective Spiral Tube. The tube should be straight so that the fiber is not twisted when inserted. Then turn the end cap of the spiral tube. Saddle Tube End cap E39-F3A Reflective Unit Lens When the E39-F3A is attached to the fiber, the E3X can sense the light reflected from the interior of the E39-F3A. If this happens, adjust the sensitivity of the E3X Amplifier with Sensitivity Adjustor. Place a sensing object or white paper at the sensing distance set and adjust the insertion length of the Fiber Unit to the E39-F3A so that the light spot is as small as possible. Then fix the position of the Fiber Unit with the hexagonal wrench (attachment) Tighten Protective spiral tube Fiber Unit Loosen A Lens Secure the Protective Spiral Tube on a suitable place with the attached nut. B Insertion Fiber Unit (E32-D32) A: The focus is farther than the E39-F3A. B: The focus is closer than the E39-F3A NOTE: DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters to inches divide by 25.4. Omron Europe B.V. EMA-ISD, tel:+31 23 5681390, fax:+31 23 5681397, http://www.eu.omron.com/ema Cat. No. CEDSAX2 3/97 Specifications subject to change without notice. Printed in U.S.A.