Metal Alloy Inductors DFE252010P Recommended patterns Inductance Range: 0.33~4.7H (Unit: mm) FEATURES (Unit: mm) Miniature size: 2520 footprint (2.5mmx2.0mm) and low profile(1.0mm Max. height) The use of magnetic iron powder ensure capability for large current. The use of Flat wire for Low DC resistance. Magnetically shielded, low audible core noise. Reflow solderable. Operating temperature : -40+125C STANDARD PART NUMBERS (2.52.01.0mm Max.) -40+125C TYPE DFE252010P (Quantity/reel; 3,000 PCS) Part Number Inductance L(H) Tolerance (%) DFE252010P-R33M=P2 DFE252010P-R47M=P2 DFE252010P-R68M=P2 DFE252010P-1R0M=P2 DFE252010P-1R2M=P2 DFE252010P-1R5M=P2 DFE252010P-2R2M=P2 DFE252010P-3R3M=P2 DFE252010P-4R7M=P2 0.33 0.47 0.68 1.0 1.2 1.5 2.2 3.3 4.7 20 20 20 20 20 20 20 20 20 Test Frequency (MHz) 1 1 1 1 1 1 1 1 1 (1) Inductance is measured with a LCR meter 4284A (Agilent Technologies) or equivalent. Test frequency at 1MHz (2) DC resistance is measured with 34420A (Agilent Technologies) or 3541(HIOKI). (Reference ambient temperature 20C) (3) Maximum allowable DC current is that which causes a 30% inductance reduction from the initial value, coil temperature to rise by 40C whichever is smaller. (Reference ambient temperature 20C) DC Resistance (m) Max. (Typ.) 29 (22) 35 (27) 48 (40) 54 (45) 68 (57) 82 (68) 115 (96) 195 (160) 270 (220) Rated DC Current (A) Max. (Typ.) L/L=30% T=40C 5.7 (6.4) 3.8 (4.4) 5.0 (5.5) 3.5 (4.1) 4.1 (4.6) 3.0 (3.5) 3.8 (4.2) 2.7 (3.2) 3.2 (3.7) 2.4 (2.8) 3.0 (3.4) 2.1 (2.5) 2.6 (2.9) 1.7 (2.0) 2.1 (2.4) 1.4 (1.7) 1.7 (1.9) 1.1 (1.3) (1)LCR4284A (Agilent Technologies) 1MHz (2)34420A (Agilent Technologies)/ 3541(HIOKI) 20C (3) 30%40C 20C Mouser Electronics Authorized Distributor Click to View Pricing, Inventory, Delivery & Lifecycle Information: Murata: DFE252010P-3R3M=P2 DFE252010P-1R2M=P2 DFE252010P-2R2M=P2 DFE252010P-1R0M=P2 DFE252010P1R5M=P2 DFE252010P-R47M=P2 DFE252010P-R33M=P2 DFE252010P-4R7M=P2