TPSA154K050R9000 - AVX

TPS Series

Low ESR

HOW TO ORDER

Technical Data: All technical data relate to an ambient temperature of +25°C

Capacitance Range: 0.15 μF to 1500 μF

Capacitance Tolerance: ±10%; ±20%

Rated Voltage (VR)+85°C: 2.5 4 6.3 10 16 20 25 35 50

Category Voltage (VC) +125°C: 1.7 2.7 4 7 10 13 17 23 33

Surge Voltage (VS) +85°C: 3.3 5.2 8 13 20 26 32 46 65

Surge Voltage (VS) +125°C: 2.2 3.4 5 8 13 16 20 28 40

Temperature Range: -55°C to +125°C

Environmental Classification: 55/125/56 (IEC 68-2)

Reliability: 1% per 1000 hours at 85°C, VRwith 0.1Ω/V series impedance,

60% confidence level

Termination Finished: Sn Plating (standard), Gold and SnPb Plating upon request

TECHNICAL SPECIFICATIONS

CASE DIMENSIONS: millimeters (inches)

Code EIA EIA L±0.20 W+0.20 (0.008) H+0.20 (0.008) W1±0.20 A+0.30 (0.012) S Min.

Code Metric (0.008) -0.10 (0.004) -0.10 (0.004) (0.008) -0.20 (0.008)

A1206 3216-18 3.20 (0.126) 1.60 (0.063) 1.60 (0.063) 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)

B1210 3528-21 3.50 (0.138) 2.80 (0.110) 1.90 (0.075) 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)

C2312 6032-28 6.00 (0.236) 3.20 (0.126) 2.60 (0.102) 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)

D2917 7343-31 7.30 (0.287) 4.30 (0.169) 2.90 (0.114) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)

E2917 7343-43 7.30 (0.287) 4.30 (0.169) 4.10 (0.162) 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)

F2312 6032-20 6.00 (0.236) 3.20 (0.126) 2.00 (0.079) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)

P0805 2012-15 2.05 (0.081) 1.35 (0.053) 1.50 (0.059) max. 1.00 ±0.10 0.50 (0.020) 0.85 (0.033)

(0.039 ±0.004)

R0805 2012-12 2.05 (0.081) 1.30 (0.051) 1.20 (0.047) max. 1.00 ±0.10 0.50 (0.020) 0.85 (0.033)

(0.039 ±0.004)

S1206 3216-12 3.20 (0.126) 1.60 (0.063) 1.20 (0.047) max. 1.20 (0.047) 0.80 (0.031) 1.10 (0.043)

T1210 3528-12 3.50 (0.138) 2.80 (0.110) 1.20 (0.047) max. 2.20 (0.087) 0.80 (0.031) 1.40 (0.055)

V2924 7361-38 7.30 (0.287) 6.10 (0.240) 3.55 (0.140) 3.10 (0.120) 1.30 (0.051) 4.40 (0.173)

W2312 6032-15 6.00 (0.236) 3.20 (0.126) 1.50 (0.059) max. 2.20 (0.087) 1.30 (0.051) 2.90 (0.114)

X2917 7343-15 7.30 (0.287) 4.30 (0.169) 1.50 (0.059) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)

Y2917 7343-20 7.30 (0.287) 4.30 (0.169) 2.00 (0.079) max. 2.40 (0.094) 1.30 (0.051) 4.40 (0.173)

W1 dimension applies to the termination width for A dimensional area only.

For part marking see page 130

107

Capacitance Code

pF code: 1st two

digits represent

significant figures,

3rd digit represents

multiplier (number of

zeros to follow)

Tolerance

K = ±10%

M = ±20%

010

Rated DC Voltage

002 = 2.5Vdc

004 = 4Vdc

006 = 6.3Vdc

010 = 10Vdc

016 = 16Vdc

020 = 20Vdc

025 = 25Vdc

035 = 35Vdc

050 = 50Vdc

Packaging

R = Pure Tin 7" Reel

S = Pure Tin 13" Reel

A = Gold Plating 7" Reel

B = Gold Plating 13" Reel

H = Tin Lead 7" Reel

(Contact Manufacturer)

K = Tin Lead 13" Reel

(Contact Manufacturer)

H, K = Non RoHS

0100

ESR in mΩ

• Low ESR series of robust Mn02solid

electrolyte capacitors

• CV range: 0.15-1500μF / 2.5-50V

• 14 case sizes available

• Power supply applications

TPS

Type

Case Size

See table

above

—

Additional

characters may be

added for special

requirements

V = Dry pack Option

(selected codes only)

LEAD-FREE COMPATIBLE

COMPONENT

SnPb termination option is not

RoHS compliant.

TPS Series

Low ESR

Released codes

(M tolerance only)

Engineering samples - please contact manufacturer

*Codes under development - subject to change

ESR limits quoted in brackets (milliohms)

NOTE: Voltage ratings are minimum values. AVX reserves the right to supply

higher ratings in the same case size, to the same reliability standards.

Capacitance Rated Voltage DC (VR) to 85°C

μF Code 2.5V (e) 4V (G) 6.3V (J) 10V (A) 16V (C) 20V (D) 25V (E) 35V (V) 50V (T)

0.15 154 A(9000)

0.22 224 A(6000) A(7000)

0.33 334 A(6000)

0.47 474 A(7000) A(6000) C(2300)

B(4000)

0.68 684 A(6000) A(6000)

1 105 R(9000) A(3000), R(6000) R(2500,4000) A(3000) C(2500)

S(6000), T(2000) B(2000)

1.5 155 A(3000) B(2500) C(1500,2000)

B(1800)

2.2 225 R(7000) A(1800) A(1800,3500) A(3000) B(900,1200,2500) A(1500), B(750, D(1200)

T(2000) 1500,2000), C(1000)

3.3 335 T(1500) A(3500) A(2500) A(1000,1500) B(1000) D(800)

B(1300) B(750,1500,2000) C(700)

4.7 475 S(4000) A(1400) A(2000) A(1800)

B(700,900,1500) B(700,1500) D(300,500,700)

R(3000,5000) B(800,1500) B(750,1000) C(600), D(700)

A(1000)

6.8 685 A(1800) A(1800) A(1500) B(600,1000) B(700) C(350) D(200, 300,

T(1800) B(600,1200)

C(700) C(500,600,700) D(150,400,500) 500,600)

A(1500) A(900,1800) B(500,800), C(500) B(500,1000) B(1800) D(125,300) E(250,300,

10 106 R(3000) R(1000,1500,3000) P(2000)

(M)

, S(900) T(800,1000) C(500,700) C(300,500) E(200), Y(250) 400,500)

T(1000) T(1000,2000) W(500,600) W(250, 500)

A(1000) B(500) C(220,300) C(350,450) E(250)

15 156 A(700,1500) B(450,600) B(500,800) C(400,450) D(100,300) D(100,300) V(250)

T(1200) Y(250)

A(500,900) A(900) B(400,600) B(400,600) D(125,200,300,400)

22 226 B(375,600) B(400,500,700) C(150,250,300,375) C(100,150,400)

C(275,400) E(125,200,300)

S(900) C(300), T(800) W(500) D(200,300) D(100,200,300) Y(200)

A(700) B(350,500) D(100,200,300)

A(600) B(250,425,500,650) C(100,150,225,300) C(300) E(100,175, D(200,300)

33 336 B(250,350,450,600) C(150,375,500) D(200), W(140,175, D(100,200) 200,300) E(100,250,300)

T(800) W(350) 250,400,500) Y(200) V(200)

Y(300,400)

A(800) B(250,350,500,650) C(110,350) D(75,100,200)

47 476 A(500) B(250,350,500) C(200,350) D(80,100,150,200) E(70,125,150, D(125,150,250) E(200,250)

C(300), T(1200) D(100) W(200) 200,250) E(80,100,125) V(150,200)

W(125,150,250) X(180), Y(250)

B(600) C(125,200)

B(250,350,500) C(80,100,200,300) D(70,100,150) D(70,150, E(125,200)

68 686 C(150,200)

D(100,150), W(100,150)

F(200), X(150) 200,300) V(80,95,150,200) V(150,200)

W(110,125,250) Y(100,200) Y(150,200,250) E(125,150,200)

B(400)

(M)

C(200)

B(200,250, B(250,400) C(75,100,150,200) D(60,100,125,150) D(85,100,150)

100 107 B(200) 350,500) C(75,150) D(50,65,80,100,125, E(55,100,125,150) E(100,150,200) E(150)

(M)

/V(100)

W(100) W(100,150) 150), E(125) W(150) F(150,200)

(M)

V(60,85,100,200)

Y(100) X(85,150,200) Y(100,150,200)

Y(100,150,200)

B(250) C(50,90,150,200,250) C(150), D(50,85,100), D(60,85,100,125,150)

150 157 B(150) C(70,80) D(50,125), E(100), F(200), X(100)

(M)

E(100), V(45,75) V(80)

Y(40,50) Y(100,150,200) Y(200)

(M)

B(150, C(70,100,125,250) D(40,50,100,150)

220 227 200,600) D(40,50,100) D(50,100,125) E(50,60,70,100, E(100,150)

D(45)Y(40,50,75) E(100), F(200) 125,150) V(50,75,100,150)

Y(100,150) Y(100,150,200)

C(100) C(80,100)

330 337 Y(40) D(35,45,100) D(45,50,70,100) D(50,65,100,150) E(200)

(M)

F(200) E(50,100,125,150) E(40,50,60,100)

X(100) V(100), Y(100,150) V(40,60,100)

D(35) D(45,60,100,200)

470 477 F(200) D(45,100) E(45,50,60,100,200) E(45,50,60,100,200)

Y(100) E(35,45,100) V(40,55,100), Y(150) V(40,60,100)

D(35,50) D(45,60,100) E(45,60,100)

680 687 E(35,50) E(40,60,100) V(35,40,50)

Y(100)

1000 108 E(30,40) E(40,60) E(100)

(M)

, V(40,50)

(M)

Y(100)

(M)

V(25,35,40,50)

1500 158 D(100) E(50,75)

E(50) V(50,75)

(M)

V(30,40)

(M)

CAPACITANCE AND RATED VOLTAGE, VR (VOLTAGE CODE) RANGE

(LETTER DENOTES CASE SIZE)

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

2.5 Volt @ 85ºC (1.7 Volt @ 125ºC)

TPSB107*002#0200 B 100 2.5 5 6 200 1 0.652 0.587 0.261 0.130 0.117 0.052

TPSB157*002#0150 B 150 2.5 3 10 150 1 0.753 0.677 0.301 0.113 0.102 0.045

TPSB227*002#0150 B 220 2.5 4.4 16 150 1 0.753 0.677 0.301 0.113 0.102 0.045

TPSB227*002#0200 B 220 2.5 4.4 16 200 1 0.652 0.587 0.261 0.130 0.117 0.052

TPSB227*002#0600 B 220 2.5 4.4 16 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSD227*002#0045 D 220 2.5 4.4 8 45 1 1.826 1.643 0.730 0.082 0.074 0.033

TPSY337*002#0040 Y 330 2.5 8.2 8 40 1

1.768 1.591 0.707 0.071 0.064 0.028

TPSD477*002#0035 D 470 2.5 11.6 8 35 1 2.070 1.863 0.828 0.072 0.065 0.029

TPSF477*002#0200 F 470 2.5 11.8 12 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSY477*002#0100 Y 470 2.5 11 12 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSD687*002#0035 D 680 2.5 17 16 35 1 2.070 1.863 0.828 0.072 0.065 0.029

TPSD687*002#0050 D 680 2.5 17 16 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSE687*002#0035 E 680 2.5 17 10 35 1

2.171 1.954 0.868 0.076 0.068 0.030

TPSE687*002#0050 E 680 2.5 17 10 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSY687*002#0100 Y 680 2.5 17 12 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSE108*002#0030 E 1000 2.5 20 14 30 1

2.345 2.111 0.938 0.070 0.063 0.028

TPSE108*002#0040 E 1000 2.5 20 14 40 1

2.031 1.828 0.812 0.081 0.073 0.032

TPSY108M002#0100 Y 1000 2.5 25 30 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSD158*002#0100 D 1500 2.5 37.5 60 100 1 1.125 1.102 0.490 0.122 0.110 0.049

TPSE158*002#0050 E 1500 2.5 37.5 20 50 1

1.817 1.635 0.727 0.001 0.082 0.036

TPSV158M002#0030 V 1500 2.5 30 20 30 1

2.887 2.598 1.155 0.087 0.078 0.035

TPSV158M002#0040 V 1500 2.5 30 20 40 1

2.500 2.250 1.000 0.100 0.090 0.040

4 Volt @ 85ºC (2.7 Volt @ 125ºC)

TPSR106*004#3000 R 10 4 0.5 6 3000 1 0.135 0.122 0.054 0.406 0.366 0.162

TPSA476*004#0500 A 47 4 1.9 8 500 1 0.387 0.349 0.155 0.194 0.174 0.077

TPSB107*004#0200 B 100 4 4 8 200 1 0.652 0.587 0.261 0.130 0.117 0.052

TPSB107*004#0250 B 100 4 4 8 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB107*004#0350 B 100 4 4 8 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB107*004#0500 B 100 4 4 8 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSW107*004#0100 W 100 4 4 6 100 1 0.949 0.854 0.379 0.095 0.085 0.038

TPSB157*004#0250 B 150 4 6 10 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSC157*004#0070 C 150 4 6 6 70 1 1.254 1.128 0.501 0.088 0.079 0.035

TPSC157*004#0080 C 150 4 6 6 80 1 1.173 1.055 0.469 0.094 0.084 0.038

TPSD227*004#0040 D 220 4 8.8 8 40 1 1.936 1.743 0.775 0.077 0.070 0.031

TPSD227*004#0050 D 220 4 8.8 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD227*004#0100 D 220 4 8.8 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSY227*004#0040 Y 220 4 8.8 8 40 1

1.768 1.591 0.707 0.071 0.064 0.028

TPSY227*004#0050 Y 220 4 8.8 8 50 1

1.581 1.423 0.632 0.095 0.085 0.038

TPSY227*004#0075 Y 220 4 8.8 8 75 1

1.291 1.162 0.516 0.097 0.087 0.039

TPSC337*004#0100 C 330 4 13.2 8 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSD337*004#0035 D 330 4 13.2 8 35 1 2.070 1.863 0.828 0.072 0.065 0.029

TPSD337*004#0045 D 330 4 13.2 8 45 1 1.826 1.643 0.730 0.082 0.074 0.033

TPSD337*004#0100 D 330 4 13.2 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSF337*004#0200 F 330 4 13.2 10 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSX337*004#0100 X 330 4 13.2 8 100 1

1.000 0.900 0.400 0.100 0.090 0.040

TPSD477*004#0045 D 470 4 18.8 12 45 1 1.826 1.643 0.730 0.082 0.074 0.033

TPSD477*004#0100 D 470 4 18.8 12 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSE477*004#0035 E 470 4 18.8 12 35 1

2.171 1.954 0.868 0.076 0.068 0.030

TPSE477*004#0045 E 470 4 18.8 12 45 1

1.915 1.723 0.766 0.086 0.078 0.034

TPSE477*004#0100 E 470 4 18.8 12 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSD687*004#0045 D 680 4 27.2 14 45 1 1.915 1.643 0.730 0.082 0.074 0.033

TPSD687*004#0060 D 680 4 27.2 14 60 1 1.581 1.423 0.632 0.095 0.085 0.038

TPSD687*004#0100 D 680 4 27.2 14 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSE687*004#0040 E 680 4 27.2 10 40 1

2.031 1.828 0.812 0.081 0.073 0.032

TPSE687*004#0060 E 680 4 27.2 10 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE687*004#0100 E 680 4 27.2 10 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE108*004#0040 E 1000 4 40 14 40 1

2.031 1.828 0.812 0.081 0.073 0.032

TPSE108*004#0060 E 1000 4 40 14 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSV108*004#0025 V 1000 4 40 16 25 1

3.162 2.846 1.265 0.079 0.071 0.032

TPSV108*004#0035 V 1000 4 40 16 35 1

2.673 2.405 1.069 0.094 0.084 0.037

TPSV108*004#0040 V 1000 4 40 16 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV108*004#0050 V 1000 4 40 16 50 1

2.236 2.012 0.894 0.112 0.101 0.045

TPSE158*004#0050 E 1500 4 60 30 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE158*004#0075 E 1500 4 60 30 75 1

1.483 1.335 0.593 0.111 0.100 0.044

TPSV158M004#0050 V 1500 4 60 30 50 1

2.236 2.012 0.894 0.112 0.101 0.045

TPSV158M004#0075 V 1500 4 60 30 75 1

1.826 1.643 0.730 0.137 0.123 0.055

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

6.3 Volt @ 85ºC (4 Volt @ 125ºC)

TPSR225*006#7000 R 2.2 6.3 0.5 6 7000 1 0.089 0.080 0.035 0.620 0.558 0.248

TPSS475*006#4000 S 4.7 6.3 0.5 6 4000 1 0.127 0.115 0.051 0.510 0.459 0.204

TPSA685*006#1800 A 6.8 6.3 0.5 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPSA106*006#1500 A 10 6.3 0.6 6 1500 1 0.224 0.201 0.089 0.335 0.302 0.134

TPSR106*006#1000 R 10 6.3 0.6 8 1000 1 0.235 0.211 0.094 0.235 0.211 0.094

TPSR106*006#1500 R 10 6.3 0.6 8 1500 1 0.191 0.172 0.077 0.287 0.259 0.115

TPSR106*006#3000 R 10 6.3 0.6 8 3000 1 0.135 0.122 0.054 0.406 0.366 0.162

TPST106*006#1000 T 10 6.3 0.6 6 1000 1 0.283 0.255 0.113 0.283 0.255 0.113

TPSA156*006#0700 A 15 6.3 0.9 6 700 1 0.327 0.295 0.131 0.229 0.206 0.092

TPSA156*006#1500 A 15 6.3 0.9 6 1500 1 0.224 0.201 0.089 0.335 0.302 0.134

TPSA226*006#0500 A 22 6.3 1.4 6 500 1 0.387 0.349 0.155 0.194 0.174 0.077

TPSA226*006#0900 A 22 6.3 1.4 6 900 1 0.289 0.260 0.115 0.260 0.234 0.104

TPSB226*006#0375 B 22 6.3 1.4 6 375 1 0.476 0.428 0.190 0.179 0.161 0.071

TPSB226*006#0600 B 22 6.3 1.4 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSS226*006#0900 S 22 6.3 1.4 8 900 1 0.269 0.242 0.107 0.242 0.218 0.097

TPSA336*006#0600 A 33 6.3 2.1 8 600 1 0.354 0.318 0.141 0.212 0.191 0.085

TPSB336*006#0250 B 33 6.3 2.1 6 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB336*006#0350 B 33 6.3 2.1 6 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB336*006#0450 B 33 6.3 2.1 6 450 1 0.435 0.391 0.174 0.196 0.176 0.078

TPSB336*006#0600 B 33 6.3 2.1 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPST336*006#0800 T 33 6.3 2.1 10 800 1 0.316 0.285 0.126 0.253 0.228 0.101

TPSA476*006#0800 A 47 6.3 2.8 10 800 1 0.306 0.276 0.122 0.245 0.220 0.098

TPSB476*006#0250 B 47 6.3 3 6 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB476*006#0350 B 47 6.3 3 6 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB476*006#0500 B 47 6.3 3 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSC476*006#0300 C 47 6.3 3 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPST476*006#1200 T 47 6.3 2.8 10 1200 1 0.258 0.232 0.103 0.310 0.279 0.124

TPSB686*006#0250 B 68 6.3 4.3 8 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB686*006#0350 B 68 6.3 4.3 8 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB686*006#0500 B 68 6.3 4.3 8 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSC686*006#0150 C 68 6.3 4.3 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC686*006#0200 C 68 6.3 4.3 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSW686*006#0110 W 68 6.3 4.3 6 110 1 0.905 0.814 0.362 0.099 0.090 0.040

TPSW686*006#0125 W 68 6.3 4.3 6 125 1 0.849 0.764 0.339 0.106 0.095 0.042

TPSW686*006#0250 W 68 6.3 4.3 6 250 1 0.600 0.540 0.240 0.150 0.135 0.060

TPSB107*006#0250 B 100 6.3 6.3 10 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB107*006#0400 B 100 6.3 6.3 10 400 1 0.461 0.415 0.184 0.184 0.166 0.074

TPSC107*006#0075 C 100 6.3 6.3 6 75 1 1.211 1.090 0.484 0.091 0.082 0.036

TPSC107*006#0150 C 100 6.3 6.3 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSW107*006#0100 W 100 6.3 6.3 6 100 1 0.949 0.854 0.379 0.095 0.085 0.038

TPSW107*006#0150 W 100 6.3 6.3 6 150 1 0.775 0.697 0.310 0.116 0.105 0.046

TPSY107*006#0100 Y 100 6.3 6.3 6 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSC157*006#0050 C 150 6.3 9.5 6 50 1 1.483 1.335 0.593 0.074 0.067 0.030

TPSC157*006#0090 C 150 6.3 9.5 6 90 1 1.106 0.995 0.442 0.099 0.090 0.040

TPSC157*006#0150 C 150 6.3 9.5 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC157*006#0200 C 150 6.3 9.5 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSC157*006#0250 C 150 6.3 9.5 6 250 1 0.663 0.597 0.265 0.166 0.149 0.066

TPSD157*006#0050 D 150 6.3 9.5 6 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD157*006#0125 D 150 6.3 9.5 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSY157*006#0040 Y 150 6.3 9.5 6 40 1

1.768 1.591 0.707 0.071 0.064 0.028

TPSY157*006#0050 Y 150 6.3 9.5 6 50 1

1.581 1.423 0.632 0.079 0.071 0.032

TPSC227*006#0070 C 220 6.3 13.9 8 70 1 1.254 1.128 0.501 0.088 0.079 0.035

TPSC227*006#0100 C 220 6.3 13.9 8 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSC227*006#0125 C 220 6.3 13.9 8 125 1 0.938 0.844 0.375 0.117 0.106 0.047

TPSC227*006#0250 C 220 6.3 13.9 8 250 1 0.663 0.597 0.265 0.166 0.149 0.066

TPSD227*006#0050 D 220 6.3 13.9 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD227*006#0100 D 220 6.3 13.9 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD227*006#0125 D 220 6.3 13.9 8 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSE227*006#0100 E 220 6.3 13.9 8 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSF227*006#0200 F 220 6.3 13.2 10 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSY227*006#0100 Y 220 6.3 13.9 10 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY227*006#0150 Y 220 6.3 13.9 10 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSC337*006#0080 C 330 6.3 19.8 12 80 1 1.173 1.055 0.469 0.094 0.084 0.038

TPSC337*006#0100 C 330 6.3 19.8 12 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSD337*006#0045 D 330 6.3 20.8 8 45 1 1.826 1.643 0.730 0.082 0.074 0.033

TPSD337*006#0050 D 330 6.3 20.8 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSD337*006#0070 D 330 6.3 20.8 8 70 1 1.464 1.317 0.586 0.102 0.092 0.041

TPSD337*006#0100 D 330 6.3 20.8 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSE337*006#0050 E 330 6.3 20.8 8 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE337*006#0100 E 330 6.3 20.8 8 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE337*006#0125 E 330 6.3 20.8 8 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE337*006#0150 E 330 6.3 20.8 8 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSV337*006#0100 V 330 6.3 20.8 8 100 1

1.581 1.423 0.632 0.158 0.142 0.063

TPSY337*006#0100 Y 330 6.3 20.8 12 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY337*006#0150 Y 330 6.3 20.8 12 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSD477*006#0045 D 470 6.3 29.6 12 45 1 1.826 1.643 0.730 0.082 0.074 0.033

TPSD477*006#0060 D 470 6.3 29.6 12 60 1 1.581 1.423 0.632 0.095 0.085 0.038

TPSD477*006#0100 D 470 6.3 29.6 12 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD477*006#0200 D 470 6.3 29.6 12 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSE477*006#0045 E 470 6.3 29.6 10 45 1

1.915 1.723 0.766 0.086 0.078 0.034

TPSE477*006#0050 E 470 6.3 29.6 10 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE477*006#0060 E 470 6.3 29.6 10 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE477*006#0100 E 470 6.3 29.6 10 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE477*006#0200 E 470 6.3 29.6 10 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSV477*006#0040 V 470 6.3 29.6 10 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV477*006#0055 V 470 6.3 29.6 10 55 1

2.132 1.919 0.853 0.117 0.106 0.047

TPSV477*006#0100 V 470 6.3 29.6 10 100 1

1.581 1.423 0.632 0.158 0.142 0.063

TPSY477*006#0150 Y 470 6.3 28.2 20 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSE687*006#0045 E 680 6.3 42.8 10 45 1

1.915 1.723 0.766 0.086 0.078 0.034

TPSE687*006#0060 E 680 6.3 42.8 10 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE687*006#0100 E 680 6.3 42.8 10 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSV687*006#0035 V 680 6.3 42.8 14 35 1

2.673 2.405 1.069 0.094 0.084 0.037

TPSV687*006#0040 V 680 6.3 42.8 10 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV687*006#0050 V 680 6.3 42.8 10 50 1

2.236 2.012 0.894 0.112 0.101 0.045

TPSE108M006#0100 E 1000 6.3 60 20 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSV108M006#0040 V 1000 6.3 60 16 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV108M006#0050 V 1000 6.3 60 16 50 1

2.236 2.012 0.894 0.112 0.101 0.045

10 Volt @ 85ºC (7 Volt @ 125ºC)

TPSR105*010#9000 R 1 10 0.5 4 9000 1 0.078 0.070 0.031 0.704 0.633 0.281

TPSA225*010#1800 A 2.2 10 0.5 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPST335*010#1500 T 3.3 10 0.5 6 1500 1 0.231 0.208 0.092 0.346 0.312 0.139

TPSA475*010#1400 A 4.7 10 0.5 6 1400 1 0.231 0.208 0.093 0.324 0.292 0.130

TPSR475*010#3000 R 4.7 10 0.5 6 3000 1 0.135 0.122 0.054 0.406 0.366 0.162

TPSR475*010#5000 R 4.7 10 0.5 6 5000 1 0.105 0.094 0.042 0.524 0.472 0.210

TPSA685*010#1800 A 6.8 10 0.7 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPST685*010#1800 T 6.8 10 0.7 6 1800 1 0.211 0.190 0.084 0.379 0.342 0.152

TPSA106*010#0900 A 10 10 1 6 900 1 0.289 0.260 0.115 0.260 0.234 0.104

TPSA106*010#1800 A 10 10 1 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPSP106M010#2000 P 10 10 1 8 2000 1 0.173 0.156 0.069 0.346 0.312 0.139

TPSS106*010#0900 S 10 10 1 8 900 1 0.269 0.242 0.107 0.242 0.218 0.097

TPST106*010#1000 T 10 10 1 6 1000 1 0.283 0.255 0.113 0.283 0.255 0.113

TPST106*010#2000 T 10 10 1 6 2000 1 0.200 0.180 0.080 0.400 0.360 0.160

TPSA156*010#1000 A 15 10 1.5 6 1000 1 0.274 0.246 0.110 0.274 0.246 0.110

TPSB156*010#0450 B 15 10 1.5 6 450 1 0.435 0.391 0.174 0.196 0.176 0.078

TPSB156*010#0600 B 15 10 1.5 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPST156*010#1200 T 15 10 1.5 8 1200 1 0.258 0.232 0.103 0.310 0.279 0.124

TPSB226*010#0400 B 22 10 2.2 6 400 1 0.461 0.415 0.184 0.184 0.166 0.074

TPSB226*010#0500 B 22 10 2.2 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB226*010#0700 B 22 10 2.2 6 700 1 0.348 0.314 0.139 0.244 0.220 0.098

TPSC226*010#0300 C 22 10 2.2 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPST226*010#0800 T 22 10 2.2 8 800 1 0.316 0.285 0.126 0.253 0.228 0.101

TPSA336*010#0700 A 33 10 3.3 8 700 1 0.327 0.295 0.131 0.229 0.206 0.092

TPSB336*010#0250 B 33 10 3.3 6 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB336*010#0425 B 33 10 3.3 6 425 1 0.447 0.402 0.179 0.190 0.171 0.076

TPSB336*010#0500 B 33 10 3.3 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB336*010#0650 B 33 10 3.3 6 650 1 0.362 0.325 0.145 0.235 0.212 0.094

TPSC336*010#0150 C 33 10 3.3 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC336*010#0375 C 33 10 3.3 6 375 1 0.542 0.487 0.217 0.203 0.183 0.081

TPSC336*010#0500 C 33 10 3.3 6 500 1 0.469 0.422 0.188 0.235 0.211 0.094

TPSW336*010#0350 W 33 10 3.3 6 350 1 0.507 0.456 0.203 0.177 0.160 0.071

TPSB476*010#0250 B 47 10 4.7 8 250 1 0.583 0.525 0.233 0.146 0.131 0.058

TPSB476*010#0350 B 47 10 4.7 8 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB476*010#0500 B 47 10 4.7 8 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB476*010#0650 B 47 10 4.7 8 650 1 0.362 0.325 0.145 0.235 0.212 0.094

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSC476*010#0200 C 47 10 4.7 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSC476*010#0350 C 47 10 4.7 6 350 1 0.561 0.505 0.224 0.196 0.177 0.078

TPSD476*010#0100 D 47 10 4.7 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSW476*010#0125 W 47 10 4.7 6 125 1 0.849 0.764 0.339 0.106 0.095 0.042

TPSW476*010#0150 W 47 10 4.7 6 150 1 0.775 0.697 0.310 0.116 0.105 0.046

TPSW476*010#0250 W 47 10 4.7 6 250 1 0.600 0.540 0.240 0.150 0.135 0.060

TPSB686*010#0600 B 68 10 6.8 8 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSC686*010#0080 C 68 10 6.8 6 80 1 1.173 1.055 0.469 0.094 0.084 0.038

TPSC686*010#0100 C 68 10 6.8 6 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSC686*010#0200 C 68 10 6.8 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSC686*010#0300 C 68 10 6.8 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSD686*010#0100 D 68 10 6.8 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD686*010#0150 D 68 10 6.8 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSY686*010#0100 Y 68 10 6.8 6 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY686*010#0200 Y 68 10 6.8 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSW686*010#0100 W 68 10 6.8 6 100 1 0.949 0.854 0.379 0.095 0.085 0.038

TPSW686*010#0150 W 68 10 6.8 6 150 1 0.775 0.697 0.310 0.116 0.105 0.046

TPSB107M010#0400 B 100 10 10 8 400 1 0.461 0.415 0.184 0.184 0.166 0.074

TPSC107*010#0075 C 100 10 10 8 75 1 1.211 1.090 0.484 0.091 0.082 0.036

TPSC107*010#0100 C 100 10 10 8 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSC107*010#0150 C 100 10 10 8 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC107*010#0200 C 100 10 10 8 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSD107*010#0050 D 100 10 10 6 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD107*010#0065 D 100 10 10 6 65 1 1.519 1.367 0.608 0.099 0.089 0.039

TPSD107*010#0080 D 100 10 10 6 80 1 1.369 1.232 0.548 0.110 0.099 0.044

TPSD107*010#0100 D 100 10 10 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD107*010#0125 D 100 10 10 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSD107*010#0150 D 100 10 10 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE107*010#0125 E 100 10 10 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSW107*010#0150 W 100 10 10 6 150 1 0.775 0.697 0.310 0.116 0.105 0.046

TPSX107*010#0085 X 100 10 10 8 85 1

1.085 0.976 0.434 0.092 0.083 0.037

TPSX107*010#0150 X 100 10 10 8 150 1

0.816 0.735 0.327 0.122 0.110 0.049

TPSX107*010#0200 X 100 10 10 8 200 1

0.707 0.636 0.283 0.141 0.127 0.057

TPSY107*010#0100 Y 100 10 10 6 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY107*010#0150 Y 100 10 10 6 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSY107*010#0200 Y 100 10 10 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSC157*010#0150 C 150 10 15 8 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSD157*010#0050 D 150 10 15 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD157*010#0085 D 150 10 15 8 85 1 1.328 1.196 0.531 0.113 0.102 0.045

TPSD157*010#0100 D 150 10 15 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSE157*010#0100 E 150 10 15 8 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSF157*010#0200 F 150 10 15 10 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSX157M010#0100 X 150 10 15 6 100 1

1.000 0.900 0.400 0.100 0.090 0.040

TPSY157*010#0100 Y 150 10 15 6 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY157*010#0150 Y 150 10 15 6 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSY157*010#0200 Y 150 10 15 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSD227*010#0050 D 220 10 22 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD227*010#0100 D 220 10 22 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD227*010#0150 D 220 10 22 8 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE227*010#0050 E 220 10 22 8 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE227*010#0060 E 220 10 22 8 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE227*010#0070 E 220 10 22 8 70 1

1.535 1.382 0.614 0.107 0.097 0.043

TPSE227*010#0100 E 220 10 22 8 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE227*010#0125 E 220 10 22 8 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE227*010#0150 E 220 10 22 8 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSY227*010#0100 Y 220 10 22 10 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY227*010#0150 Y 220 10 22 10 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSY227*010#0200 Y 220 10 22 10 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSD337*010#0050 D 330 10 33 8 50 1 1.732 1.559 0.693 0.087 0.078 0.035

TPSD337*010#0065 D 330 10 33 8 65 1 1.519 1.367 0.608 0.099 0.089 0.039

TPSD337*010#0100 D 330 10 33 8 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD337*010#0150 D 330 10 33 8 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE337*010#0040 E 330 10 33 8 40 1

2.031 1.828 0.812 0.081 0.073 0.032

TPSE337*010#0050 E 330 10 33 8 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE337*010#0060 E 330 10 33 8 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE337*010#0100 E 330 10 33 8 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSV337*010#0040 V 330 10 33 10 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV337*010#0060 V 330 10 33 10 60 1

2.041 1.837 0.816 0.122 0.110 0.049

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSV337*010#0100 V 330 10 33 10 100 1

1.581 1.423 0.632 0.158 0.142 0.063

TPSE477*010#0045 E 470 10 47 10 45 1

1.915 1.723 0.766 0.086 0.078 0.034

TPSE477*010#0050 E 470 10 47 10 50 1

1.817 1.635 0.727 0.091 0.082 0.036

TPSE477*010#0060 E 470 10 47 10 60 1

1.658 1.492 0.663 0.099 0.090 0.040

TPSE477*010#0100 E 470 10 47 10 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE477*010#0200 E 470 10 47 10 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSV477*010#0040 V 470 10 47 10 40 1

2.500 2.250 1.000 0.100 0.090 0.040

TPSV477*010#0060 V 470 10 47 10 60 1

2.041 1.837 0.816 0.122 0.110 0.049

TPSV477*010#0100 V 470 10 47 10 100 1

1.581 1.423 0.632 0.158 0.142 0.063

16 Volt @ 85ºC (10 Volt @ 125ºC)

TPSA225*016#1800 A 2.2 16 0.5 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPSA225*016#3500 A 2.2 16 0.5 6 3500 1 0.146 0.132 0.059 0.512 0.461 0.205

TPST225*016#2000 T 2.2 16 0.5 6 2000 1 0.200 0.180 0.080 0.400 0.360 0.160

TPSA335*016#3500 A 3.3 16 0.5 6 3500 1 0.146 0.132 0.059 0.512 0.461 0.205

TPSA475*016#2000 A 4.7 16 0.8 6 2000 1 0.194 0.174 0.077 0.387 0.349 0.155

TPSB475*016#0800 B 4.7 16 0.8 6 800 1 0.326 0.293 0.130 0.261 0.235 0.104

TPSB475*016#1500 B 4.7 16 0.8 6 1500 1 0.238 0.214 0.095 0.357 0.321 0.143

TPSA685*016#1500 A 6.8 16 1.1 6 1500 1 0.224 0.201 0.089 0.335 0.302 0.134

TPSB685*016#0600 B 6.8 16 1.1 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSB685*016#1200 B 6.8 16 1.1 6 1200 1 0.266 0.240 0.106 0.319 0.287 0.128

TPSB106*016#0500 B 10 16 1.6 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB106*016#0800 B 10 16 1.6 6 800 1 0.326 0.293 0.130 0.261 0.235 0.104

TPSC106*016#0500 C 10 16 1.6 6 500 1 0.469 0.422 0.188 0.235 0.211 0.094

TPST106*016#0800 T 10 16 1.6 8 800 1 0.316 0.285 0.126 0.253 0.228 0.101

TPST106*016#1000 T 10 16 1.6 8 1000 1 0.283 0.255 0.113 0.283 0.255 0.113

TPSW106*016#0500 W 10 16 1.6 6 500 1 0.424 0.382 0.170 0.212 0.191 0.085

TPSW106*016#0600 W 10 16 1.6 6 600 1 0.387 0.349 0.155 0.232 0.209 0.093

TPSB156*016#0500 B 15 16 2.4 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB156*016#0800 B 15 16 2.4 6 800 1 0.326 0.293 0.130 0.261 0.235 0.104

TPSB226*016#0400 B 22 16 3.5 6 400 1 0.461 0.415 0.184 0.184 0.166 0.074

TPSB226*016#0600 B 22 16 3.5 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSC226*016#0150 C 22 16 3.5 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC226*016#0250 C 22 16 3.5 6 250 1 0.663 0.597 0.265 0.166 0.149 0.066

TPSC226*016#0300 C 22 16 3.5 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSC226*016#0375 C 22 16 3.5 6 375 1 0.542 0.487 0.217 0.203 0.183 0.081

TPSW226*016#0500 W 22 16 3.5 6 500 1 0.424 0.382 0.170 0.212 0.191 0.085

TPSB336*016#0350 B 33 16 5.3 8 350 1 0.493 0.444 0.197 0.172 0.155 0.069

TPSB336*016#0500 B 33 16 5.3 8 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSC336*016#0100 C 33 16 5.3 6 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSC336*016#0150 C 33 16 5.3 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC336*016#0225 C 33 16 5.3 6 225 1 0.699 0.629 0.280 0.157 0.142 0.063

TPSC336*016#0300 C 33 16 5.3 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSD336*016#0200 D 33 16 5.3 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSW336*016#0140 W 33 16 5.3 6 140 1 0.802 0.722 0.321 0.112 0.101 0.045

TPSW336*016#0175 W 33 16 5.3 6 175 1 0.717 0.645 0.287 0.125 0.113 0.050

TPSW336*016#0250 W 33 16 5.3 6 250 1 0.600 0.540 0.240 0.150 0.135 0.060

TPSW336*016#0400 W 33 16 5.3 6 400 1 0.474 0.427 0.190 0.190 0.171 0.076

TPSW336*016#0500 W 33 16 5.3 6 500 1 0.424 0.382 0.170 0.212 0.191 0.085

TPSY336*016#0300 Y 33 16 5.3 6 300 1

0.645 0.581 0.258 0.194 0.174 0.077

TPSY336*016#0400 Y 33 16 5.3 6 400 1

0.559 0.503 0.224 0.224 0.201 0.089

TPSC476*016#0110 C 47 16 7.5 6 110 1 1.000 0.900 0.400 0.110 0.099 0.044

TPSC476*016#0350 C 47 16 7.5 6 350 1 0.561 0.505 0.224 0.196 0.177 0.078

TPSD476*016#0080 D 47 16 7.5 6 80 1 1.369 1.232 0.548 0.110 0.099 0.044

TPSD476*016#0100 D 47 16 7.5 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD476*016#0150 D 47 16 7.5 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSD476*016#0200 D 47 16 7.5 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSW476*016#0200 W 47 16 7.5 6 200 1 0.671 0.604 0.268 0.134 0.121 0.054

TPSX476*016#0180 X 47 16 7.5 6 180 1

0.745 0.671 0.298 0.134 0.121 0.054

TPSY476*016#0250 Y 47 16 7.5 6 250 1

0.707 0.636 0.283 0.177 0.159 0.071

TPSC686*016#0125 C 68 16 10.9 6 125 1 0.938 0.844 0.375 0.117 0.106 0.047

TPSC686*016#0200 C 68 16 10.9 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSD686*016#0070 D 68 16 10.9 6 70 1 1.464 1.317 0.586 0.102 0.092 0.041

TPSD686*016#0100 D 68 16 10.9 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD686*016#0150 D 68 16 10.9 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSF686*016#0200 F 68 16 10.9 10 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSX686*016#0150 X 68 16 10.9 8 150 1

0.816 0.735 0.327 0.122 0.110 0.049

TPSY686*016#0150 Y 68 16 10.9 6 150 1

0.913 0.822 0.365 0.137 0.123 0.055

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSY686*016#0200 Y 68 16 10.9 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSY686*016#0250 Y 68 16 10.9 6 250 1

0.707 0.636 0.283 0.177 0.159 0.071

TPSC107*016#0200 C 100 16 16 6 200 1 0.742 0.667 0.297 0.148 0.133 0.059

TPSD107*016#0060 D 100 16 16 6 60 1 1.581 1.423 0.632 0.095 0.085 0.038

TPSD107*016#0100 D 100 16 16 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD107*016#0125 D 100 16 16 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSD107*016#0150 D 100 16 16 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE107*016#0055 E 100 16 16 6 55 1

1.732 1.559 0.693 0.095 0.086 0.038

TPSE107*016#0100 E 100 16 16 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE107*016#0125 E 100 16 16 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE107*016#0150 E 100 16 16 6 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSF107M016#0150 F 100 16 16 10 150 1 0.816 0.735 0.327 0.122 0.110 0.049

TPSF107M016#0200 F 100 16 16 10 200 1 0.707 0.636 0.283 0.141 0.127 0.057

TPSY107*016#0100 Y 100 16 24 6 100 1

1.118 1.006 0.447 0.112 0.101 0.045

TPSY107*016#0150 Y 100 16 16 8 150 1

0.913 0.822 0.365 0.137 0.123 0.055

TPSY107*016#0200 Y 100 16 16 8 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSD157*016#0060 D 150 16 24 6 60 1 1.581 1.423 0.632 0.095 0.085 0.038

TPSD157*016#0085 D 150 16 24 6 85 1 1.328 1.196 0.531 0.113 0.102 0.045

TPSD157*016#0100 D 150 16 24 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD157*016#0125 D 150 16 24 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSD157*016#0150 D 150 16 24 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE157*016#0100 E 150 16 24 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSV157*016#0045 V 150 16 24 8 45 1

2.357 2.121 0.943 0.106 0.095 0.042

TPSV157*016#0075 V 150 16 24 8 75 1

1.826 1.643 0.730 0.137 0.123 0.055

TPSY157M016#0200 Y 150 16 24 15 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSE227*016#0100 E 220 16 35.2 10 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE227*016#0150 E 220 16 35.2 10 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSV227*016#0050 V 220 16 35.2 8 50 1

2.236 2.012 0.894 0.112 0.101 0.045

TPSV227*016#0075 V 220 16 35.2 8 75 1

1.826 1.643 0.730 0.137 0.123 0.055

TPSV227*016#0100 V 220 16 35.2 8 100 1

1.581 1.423 0.632 0.158 0.142 0.063

TPSV227*016#0150 V 220 16 35.2 8 150 1

1.291 1.162 0.516 0.194 0.174 0.077

TPSE337M016#0200 E 330 16 52.8 30 200 11) 0.908 0.817 0.363 0.182 0.163 0.073

20 Volt @ 85ºC (13 Volt @ 125ºC)

TPSA105*020#3000 A 1 20 0.5 4 3000 1 0.158 0.142 0.063 0.474 0.427 0.190

TPSR105*020#6000 R 1 20 0.5 4 6000 1 0.096 0.086 0.038 0.574 0.517 0.230

TPSS105*020#6000 S 1 20 0.5 4 6000 1 0.104 0.094 0.042 0.624 0.562 0.250

TPST105*020#2000 T 1 20 0.5 4 2000 1 0.200 0.180 0.080 0.400 0.360 0.160

TPSA225*020#3000 A 2.2 20 0.5 6 3000 1 0.158 0.142 0.063 0.474 0.427 0.190

TPSA335*020#2500 A 3.3 20 0.7 6 2500 1 0.173 0.156 0.069 0.433 0.390 0.173

TPSB335*020#1300 B 3.3 20 0.7 6 1300 1 0.256 0.230 0.102 0.332 0.299 0.133

TPSA475*020#1800 A 4.7 20 0.9 6 1800 1 0.204 0.184 0.082 0.367 0.331 0.147

TPSB475*020#0750 B 4.7 20 0.9 6 750 1 0.337 0.303 0.135 0.252 0.227 0.101

TPSB475*020#1000 B 4.7 20 0.9 6 1000 1 0.292 0.262 0.117 0.292 0.262 0.117

TPSA685*020#1000 A 6.8 20 1.4 6 1000 1 0.274 0.246 0.110 0.274 0.246 0.110

TPSB685*020#0600 B 6.8 20 1.4 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSB685*020#1000 B 6.8 20 1.4 6 1000 1 0.292 0.262 0.117 0.292 0.262 0.117

TPSC685*020#0700 C 6.8 20 1.4 6 700 1 0.396 0.357 0.159 0.277 0.250 0.111

TPSB106*020#0500 B 10 20 2 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSB106*020#1000 B 10 20 2 6 1000 1 0.292 0.262 0.117 0.292 0.262 0.117

TPSC106*020#0500 C 10 20 2 6 500 1 0.469 0.422 0.188 0.235 0.211 0.094

TPSC106*020#0700 C 10 20 2 6 700 1 0.396 0.357 0.159 0.277 0.250 0.111

TPSW106*020#0250 W 10 20 2 6 250 1 0.600 0.540 0.240 0.150 0.135 0.060

TPSW106*020#0500 W 10 20 2 6 500 1 0.424 0.382 0.170 0.212 0.191 0.850

TPSB156*020#0500 B 15 20 3 6 500 1 0.412 0.371 0.165 0.206 0.186 0.082

TPSC156*020#0400 C 15 20 3 6 400 1 0.524 0.472 0.210 0.210 0.189 0.084

TPSC156*020#0450 C 15 20 3 6 450 1 0.494 0.445 0.198 0.222 0.200 0.089

TPSB226*020#0400 B 22 20 4.4 6 400 1 0.461 0.415 0.184 0.184 0.166 0.074

TPSB226*020#0600 B 22 20 4.4 6 600 1 0.376 0.339 0.151 0.226 0.203 0.090

TPSC226*020#0100 C 22 20 4.4 6 100 1 1.049 0.944 0.420 0.105 0.094 0.042

TPSC226*020#0150 C 22 20 4.4 6 150 1 0.856 0.771 0.343 0.128 0.116 0.051

TPSC226*020#0400 C 22 20 4.4 6 400 1 0.524 0.472 0.210 0.210 0.189 0.084

TPSD226*020#0200 D 22 20 4.4 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD226*020#0300 D 22 20 4.4 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSC336*020#0300 C 33 20 6.6 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSD336*020#0100 D 33 20 6.6 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD336*020#0200 D 33 20 6.6 6 200 1 0.866 0.779 0.346 0.173 0.155 0.069

TPSD476*020#0075 D 47 20 9.4 6 75 1 1.414 1.273 0.566 0.106 0.095 0.042

TPSD476*020#0100 D 47 20 9.4 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSD476*020#0200 D 47 20 9.4 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSE476*020#0070 E 47 20 9.4 6 70 1

1.535 1.382 0.614 0.107 0.097 0.043

TPSE476*020#0125 E 47 20 9.4 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE476*020#0150 E 47 20 9.4 6 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSE476*020#0200 E 47 20 9.4 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSE476*020#0250 E 47 20 9.4 6 250 1

0.812 0.731 0.325 0.203 0.183 0.081

TPSD686*020#0070 D 68 20 13.6 6 70 1 1.464 1.317 0.586 0.102 0.092 0.041

TPSD686*020#0150 D 68 20 13.6 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSD686*020#0200 D 68 20 13.6 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD686*020#0300 D 68 20 13.6 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSE686*020#0125 E 68 20 13.6 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE686*020#0150 E 68 20 13.6 6 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSE686*020#0200 E 68 20 13.6 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSD107*020#0085 D 100 20 20 6 85 1 1.328 1.196 0.531 0.113 0.102 0.045

TPSD107*020#0100 D 100 20 20 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD107*020#0150 D 100 20 20 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSE107*020#0100 E 100 20 20 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE107*020#0150 E 100 20 20 6 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSE107*020#0200 E 100 20 20 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSV107*020#0060 V 100 20 20 8 60 1

2.041 1.837 0.816 0.122 0.110 0.049

TPSV107*020#0085 V 100 20 20 8 85 1

1.715 1.543 0.686 0.146 0.131 0.058

TPSV107*020#0100 V 100 20 20 8 100 1

1.581 1.423 0.632 0.158 0.142 0.063

TPSV107*020#0200 V 100 20 20 8 200 1

1.118 1.006 0.447 0.224 0.201 0.089

TPSV157*020#0080 V 150 20 30 8 80 1

1.768 1.591 0.707 0.141 0.127 0.057

25 Volt @ 85ºC (17 Volt @ 125ºC)

TPSA474*025#7000 A 0.47 25 0.5 4 7000 1 0.104 0.093 0.041 0.725 0.652 0.290

TPSA684*025#6000 A 0.68 25 0.5 4 6000 1 0.112 0.101 0.045 0.671 0.604 0.268

TPSR105*025#2500 R 1 25 0.5 4 2500 1 0.148 0.133 0.059 0.371 0.334 0.148

TPSR105*025#4000 R 1 25 0.5 4 4000 1 0.117 0.106 0.047 0.469 0.422 0.188

TPSA155*025#3000 A 1.5 25 0.5 6 3000 1 0.158 0.142 0.063 0.474 0.427 0.190

TPSB155*025#1800 B 1.5 25 0.5 6 1800 1 0.217 0.196 0.087 0.391 0.352 0.156

TPSB225*025#0900 B 2.2 25 0.6 6 900 1 0.307 0.277 0.123 0.277 0.249 0.111

TPSB225*025#1200 B 2.2 25 0.6 6 1200 1 0.266 0.240 0.106 0.319 0.287 0.128

TPSB225*025#2500 B 2.2 25 0.6 6 2500 1 0.184 0.166 0.074 0.461 0.415 0.184

TPSA335*025#1000 A 3.3 25 0.8 6 1000 1 0.274 0.246 0.110 0.274 0.246 0.110

TPSA335*025#1500 A 3.3 25 0.8 6 1500 1 0.224 0.201 0.089 0.335 0.302 0.134

TPSB335*025#0750 B 3.3 25 0.8 6 750 1 0.337 0.303 0.135 0.252 0.227 0.101

TPSB335*025#1500 B 3.3 25 0.8 6 1500 1 0.238 0.214 0.095 0.357 0.321 0.143

TPSB335*025#2000 B 3.3 25 0.8 6 2000 1 0.206 0.186 0.082 0.412 0.371 0.165

TPSB475*025#0700 B 4.7 25 1.2 6 700 1 0.348 0.314 0.139 0.244 0.220 0.098

TPSB475*025#0900 B 4.7 25 1.2 6 900 1 0.307 0.277 0.123 0.277 0.249 0.111

TPSB475*025#1500 B 4.7 25 1.2 6 1500 1 0.238 0.214 0.095 0.357 0.321 0.143

TPSB685*025#0700 B 6.8 25 1.7 6 700 1 0.348 0.314 0.139 0.244 0.220 0.098

TPSC685*025#0500 C 6.8 25 1.7 6 500 1 0.469 0.422 0.188 0.235 0.211 0.094

TPSC685*025#0600 C 6.8 25 1.7 6 600 1 0.428 0.385 0.171 0.257 0.231 0.103

TPSC685*025#0700 C 6.8 25 1.7 6 700 1 0.396 0.357 0.159 0.277 0.250 0.111

TPSB106*025#1800 B 10 25 2.5 6 1800 1 0.217 0.196 0.087 0.391 0.352 0.156

TPSC106*025#0300 C 10 25 2.5 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSC106*025#0500 C 10 25 2.5 6 500 1 0.469 0.422 0.188 0.235 0.211 0.094

TPSC156*025#0220 C 15 25 3.8 6 220 1 0.707 0.636 0.283 0.156 0.140 0.062

TPSC156*025#0300 C 15 25 3.8 6 300 1 0.606 0.545 0.242 0.182 0.163 0.073

TPSD156*025#0100 D 15 25 3.8 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD156*025#0300 D 15 25 3.8 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSC226*025#0275 C 22 25 5.5 6 275 1 0.632 0.569 0.253 0.174 0.157 0.070

TPSC226*025#0400 C 22 25 5.5 6 400 1 0.524 0.472 0.210 0.210 0.189 0.084

TPSD226*025#0100 D 22 25 5.5 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD226*025#0200 D 22 25 5.5 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD226*025#0300 D 22 25 5.5 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSD336*025#0100 D 33 25 8.3 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD336*025#0200 D 33 25 8.3 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD336*025#0300 D 33 25 8.3 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSE336*025#0100 E 33 25 8.3 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE336*025#0175 E 33 25 8.3 6 175 1

0.971 0.874 0.388 0.170 0.153 0.068

TPSE336*025#0200 E 33 25 8.3 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSE336*025#0300 E 33 25 8.3 6 300 1

0.742 0.667 0.297 0.222 0.200 0.089

TPSY336*025#0200 Y 33 25 8.3 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSD476*025#0125 D 47 25 11.8 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

TPSD476*025#0150 D 47 25 11.8 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSD476*025#0250 D 47 25 11.8 6 250 1 0.775 0.697 0.310 0.194 0.174 0.077

TPSE476*025#0080 E 47 25 11.8 6 80 1

1.436 1.293 0.574 0.115 0.103 0.046

TPSE476*025#0100 E 47 25 11.8 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE476*025#0125 E 47 25 11.8 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE686*025#0125 E 68 25 17 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE686*025#0200 E 68 25 17 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSV686*025#0080 V 68 25 17 6 80 1

1.768 1.591 0.707 0.141 0.127 0.057

TPSV686*025#0095 V 68 25 17 6 95 1

1.622 1.460 0.649 0.154 0.139 0.062

TPSV686*025#0150 V 68 25 17 6 150 1

1.291 1.162 0.516 0.194 0.174 0.077

TPSV686*025#0200 V 68 25 17 6 200 1

1.118 1.006 0.447 0.224 0.201 0.089

TPSE107M025#0150 E 100 25 25 10 150 1

1.049 0.944 0.420 0.157 0.142 0.063

TPSV107*025#0100 V 100 25 25 8 100 1

1.581 1.423 0.632 0.158 0.142 0.063

35 Volt @ 85ºC (23 Volt @ 125ºC)

TPSA224*035#6000 A 0.22 35 0.5 4 6000 1 0.112 0.101 0.045 0.671 0.604 0.268

TPSA334*035#6000 A 0.33 35 0.5 4 6000 1 0.112 0.101 0.045 0.671 0.604 0.268

TPSA474*035#6000 A 0.47 35 0.5 4 6000 1 0.112 0.101 0.045 0.671 0.604 0.268

TPSB474*035#4000 B 0.47 35 0.5 4 4000 1 0.146 0.131 0.058 0.583 0.525 0.233

TPSA684*035#6000 A 0.68 35 0.5 4 6000 1 0.112 0.101 0.045 0.671 0.604 0.268

TPSA105*035#3000 A 1 35 0.5 4 3000 1 0.158 0.142 0.063 0.474 0.427 0.190

TPSB105*035#2000 B 1 35 0.5 4 2000 1 0.206 0.186 0.082 0.412 0.371 0.165

TPSB155*035#2500 B 1.5 35 0.5 6 2500 1 0.184 0.166 0.074 0.461 0.415 0.184

TPSA225*035#1500 A 2.2 35 0.8 6 1500 1 0.224 0.201 0.089 0.335 0.302 0.134

TPSB225*035#0750 B 2.2 35 0.8 6 750 1 0.337 0.303 0.135 0.252 0.227 0.101

TPSB225*035#1500 B 2.2 35 0.8 6 1500 1 0.238 0.214 0.095 0.357 0.321 0.143

TPSB225*035#2000 B 2.2 35 0.8 6 2000 1 0.206 0.186 0.082 0.412 0.371 0.165

TPSC225*035#1000 C 2.2 35 0.8 6 1000 1 0.332 0.298 0.133 0.332 0.298 0.133

TPSB335*035#1000 B 3.3 35 1.2 6 1000 1 0.292 0.262 0.117 0.292 0.262 0.117

TPSC335*035#0700 C 3.3 35 1.2 6 700 1 0.396 0.357 0.159 0.277 0.250 0.111

TPSB475*035#0700 B 4.7 35 1.6 6 700 1 0.348 0.314 0.139 0.244 0.220 0.098

TPSB475*035#1500 B 4.7 35 1.6 6 1500 1 0.238 0.214 0.095 0.357 0.321 0.143

TPSC475*035#0600 C 4.7 35 1.6 6 600 1 0.428 0.385 0.171 0.257 0.231 0.103

TPSD475*035#0700 D 4.7 35 1.6 6 700 1 0.463 0.417 0.185 0.324 0.292 0.130

TPSC685*035#0350 C 6.8 35 2.4 6 350 1 0.561 0.505 0.224 0.196 0.177 0.078

TPSD685*035#0150 D 6.8 35 2.4 6 150 1 1.000 0.900 0.400 0.150 0.135 0.060

TPSD685*035#0400 D 6.8 35 2.4 6 400 1 0.612 0.551 0.245 0.245 0.220 0.098

TPSD685*035#0500 D 6.8 35 2.4 6 500 1 0.548 0.493 0.219 0.274 0.246 0.110

TPSD106*035#0125 D 10 35 3.5 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSD106*035#0300 D 10 35 3.5 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSE106*035#0200 E 10 35 3.5 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSY106*035#0250 Y 10 35 3.5 6 250 1

0.707 0.636 0.283 0.177 0.159 0.071

TPSC156*035#0350 C 15 35 5.3 6 350 1 0.561 0.505 0.224 0.196 0.177 0.078

TPSC156*035#0450 C 15 35 5.3 6 450 1 0.494 0.445 0.198 0.222 0.200 0.089

TPSD156*035#0100 D 15 35 5.3 6 100 1 1.225 1.102 0.490 0.122 0.110 0.049

TPSD156*035#0300 D 15 35 5.3 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSY156*035#0250 Y 15 35 5.3 6 250 1

0.707 0.636 0.283 0.177 0.159 0.071

TPSD226*035#0125 D 22 35 7.7 6 125 1 1.095 0.986 0.438 0.137 0.123 0.055

TPSD226*035#0200 D 22 35 7.7 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD226*035#0300 D 22 35 7.7 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSD226*035#0400 D 22 35 7.7 6 400 1 0.612 0.551 0.245 0.245 0.220 0.098

TPSE226*035#0125 E 22 35 7.7 6 125 1

1.149 1.034 0.460 0.144 0.129 0.057

TPSE226*035#0200 E 22 35 7.7 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSE226*035#0300 E 22 35 7.7 6 300 1

0.742 0.667 0.297 0.222 0.200 0.089

TPSY226*035#0200 Y 22 35 7.7 6 200 1

0.791 0.712 0.316 0.158 0.142 0.063

TPSD336*035#0200 D 33 35 11.6 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD336*035#0300 D 33 35 11.6 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSE336*035#0100 E 33 35 11.6 6 100 1

1.285 1.156 0.514 0.128 0.116 0.051

TPSE336*035#0250 E 33 35 11.6 6 250 1

0.812 0.731 0.325 0.203 0.183 0.081

TPSE336*035#0300 E 33 35 11.6 6 300 1

0.742 0.667 0.297 0.222 0.200 0.089

TPSV336*035#0200 V 33 35 11.6 6 200 1

1.118 1.006 0.447 0.224 0.201 0.089

TPSE476*035#0200 E 47 35 16.5 6 200 1

0.908 0.817 0.363 0.182 0.163 0.073

TPSE476*035#0250 E 47 35 16.5 6 250 1

0.812 0.731 0.325 0.203 0.183 0.081

TPSV476*035#0150 V 47 35 16.5 6 150 1

1.291 1.162 0.516 0.194 0.174 0.077

TPSV476*035#0200 V 47 35 16.5 6 200 1

1.118 1.006 0.447 0.224 0.201 0.089

TPSV686*035#0150 V 68 35 23.8 6 150 1

1.291 1.162 0.516 0.194 0.174 0.077

TPSV686*035#0200 V 68 35 23.8 6 200 1

1.118 1.006 0.447 0.224 0.201 0.089

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.

TPS Series

Low ESR

RATINGS & PART NUMBER REFERENCE

Rated DCL DF ESR

100kHz RMS Current (A) 100kHz RMS Voltage (V)

AVX Case Capacitance Voltage (μA) % Max. (mΩ) MSL

Part No. Size (μF) (V) Max. Max. @100kHz 25ºC 85ºC 125ºC 25ºC 85ºC 125ºC

50 Volt @ 85ºC (33 Volt @ 125ºC)

TPSA154*050#9000 A 0.15 50 0.5 4 9000 1 0.091 0.082 0.037 0.822 0.739 0.329

TPSA224*050#7000 A 0.22 50 0.5 4 7000 1 0.104 0.093 0.041 0.725 0.652 0.290

TPSC474*050#2300 C 0.47 50 0.5 4 2300 1 0.219 0.197 0.087 0.503 0.453 0.201

TPSC105*050#2500 C 1 50 0.5 4 2500 1 0.210 0.189 0.084 0.524 0.472 0.210

TPSC155*050#1500 C 1.5 50 0.8 6 1500 1 0.271 0.244 0.108 0.406 0.366 0.162

TPSC155*050#2000 C 1.5 50 0.8 6 2000 1 0.235 0.211 0.094 0.469 0.422 0.188

TPSD225*050#1200 D 2.2 50 1.1 6 1200 1 0.354 0.318 0.141 0.424 0.382 0.170

TPSD335*050#0800 D 3.3 50 1.7 6 800 1 0.433 0.390 0.173 0.346 0.312 0.139

TPSD475*050#0300 D 4.7 50 2.4 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSD475*050#0500 D 4.7 50 2.4 6 500 1 0.548 0.493 0.219 0.274 0.246 0.110

TPSD475*050#0700 D 4.7 50 2.4 6 700 1 0.463 0.417 0.185 0.324 0.292 0.130

TPSD685*050#0200 D 6.8 50 3.4 6 200 1 0.866 0.779 0.346 0.173 0.156 0.069

TPSD685*050#0300 D 6.8 50 3.4 6 300 1 0.707 0.636 0.283 0.212 0.191 0.085

TPSD685*050#0500 D 6.8 50 3.4 6 500 1 0.548 0.493 0.219 0.274 0.246 0.110

TPSD685*050#0600 D 6.8 50 3.4 6 600 1 0.500 0.450 0.200 0.300 0.270 0.120

TPSE106*050#0250 E 10 50 5 6 250 1

0.812 0.731 0.325 0.203 0.183 0.081

TPSE106*050#0300 E 10 50 5 6 300 1

0.742 0.667 0.297 0.222 0.200 0.089

TPSE106*050#0400 E 10 50 5 6 400 1

0.642 0.578 0.257 0.257 0.231 0.103

TPSE106*050#0500 E 10 50 5 6 500 1

0.574 0.517 0.230 0.287 0.259 0.115

TPSE156*050#0250 E 15 50 7.5 6 250 1

0.812 0.731 0.325 0.203 0.183 0.081

TPSV156*050#0250 V 15 50 7.5 6 250 1

1.000 0.900 0.400 0.250 0.225 0.100

11) Dry pack option (see How to order) recommended for reduction of stress during soldering. Dry pack parts should be treated as MSL 3.

Moisture Sensitivity Level (MSL) is defined according to J-STD-020.

All technical data relates to an ambient temperature of +25°C. Capacitance and DF are measured at 120Hz, 0.5V RMS with a maximum DC bias of 2.2 volts.

DCL is measured at rated voltage after 5 minutes.

The EIA & CECC standards for low ESR Solid Tantalum Capacitors allow an ESR movement to 1.25 times catalogue limit post mounting.

For typical weight and composition see page 123.

NOTE: AVX reserves the right to supply a higher voltage rating or tighter tolerance part in the same case size, to the same reliability standards.