1
SY10EL58
SY100EL58
Micrel, Inc.
M9999-121205
hbwhelp@micrel.com or (408) 955-1690
DESCRIPTION
■230ps propagation delay
■High bandwidth output transitions
■Internal 75KΩ input pull-down resistors
■Available in 8-pin SOIC package
The SY10/100EL58 are 2:1 multiplexers. These devices
are functionally equivalent to the E158 devices, with
higher performance capabilities. With propagation delays
and output transition times significantly faster than the
E158, the EL58 is ideally suited for those applications
which require the ultimate in AC performance.
FEATURES
2:1 MULTIPLEXER SY10EL58
SY100EL58
TRUTH TABLE
SEL Data
Ha
Lb
PIN NAMES
Pin Function
Da, DbData Inputs
Q Data Outputs
SEL Select Input
Rev.: G Amendment: /0
Issue Date:
December 2005
2
SY10EL58
SY100EL58
Micrel, Inc.
M9999-121205
hbwhelp@micrel.com or (408) 955-1690
PACKAGE/ORDERING INFORMATION
Ordering Information(1)
Package Operating Package Lead
Part Number Type Range Marking Finish
SY10EL58ZC Z8-1 Commercial HEL58 Sn-Pb
SY10EL58ZCTR(2) Z8-1 Commercial HEL58 Sn-Pb
SY100EL58ZC Z8-1 Commercial XEL58 Sn-Pb
SY100EL58ZCTR(2) Z8-1 Commercial XEL58 Sn-Pb
SY10EL58ZI Z8-1 Industrial HEL58 Sn-Pb
SY10EL58ZITR(2) Z8-1 Industrial HEL58 Sn-Pb
SY100EL58ZI Z8-1 Industrial XEL58 Sn-Pb
SY100EL58ZITR(2) Z8-1 Industrial XEL58 Sn-Pb
SY10EL58ZG(3) Z8-1 Industrial HEL58 with Pb-Free
Pb-Free bar-line indicator NiPdAu
SY10EL58ZGTR(2, 3) Z8-1 Industrial HEL58 with Pb-Free
Pb-Free bar-line indicator NiPdAu
SY100EL58ZG(3) Z8-1 Industrial XEL58 with Pb-Free
Pb-Free bar-line indicator NiPdAu
SY100EL58ZGTR(2, 3) Z8-1 Industrial XEL58 with Pb-Free
Pb-Free bar-line indicator NiPdAu
Notes:
1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only.
2. Tape and Reel.
3. Pb-Free package is recommended for new designs.
8-Pin SOIC (Z8-1)
1
2
3
45
6
7
8
NC VCC
Q
VEE
QDb
SEL
DaMUX
1
0
3
SY10EL58
SY100EL58
Micrel, Inc.
M9999-121205
hbwhelp@micrel.com or (408) 955-1690
AC ELECTRICAL CHARACTERISTICS
VEE = VEE (Min.) to VEE (Max.); VCC = GND
TA = -40°CTA = 0°CTA = +25°CTA = +85˚C
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
tPD Propagation Delay to 60 220 380 110 220 330 120 230 340 140 250 360 ps
Output D 90 250 410 140 250 360 150 260 370 170 280 390
trOutput Rise/Fall Times Q 100 225 350 100 225 350 100 225 350 100 225 350 ps
tf(20% to 80%)
DC ELECTRICAL CHARACTERISTICS
TA = -40°CTA = 0°CTA = +25°CTA = +85˚C
Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit
IEE Power Supply Current mA
10EL — 14 17 11 14 17 11 14 17 11 14 17
100EL — 14 17 11 14 17 11 14 17 13 16 19
VEE Power Supply Voltage V
10EL –4.75 –5.2 –5.5 –4.75 –5.2 –5.5 –4.75 –5.2 –5.5 –4.75 –5.2 –5.5
100EL –4.20 –4.5 –5.5 –4.20 –4.5 –5.5 –4.20 –4.5 –5.5 –4.20 –4.5 –5.5
IIH Input HIGH Current — — 150 — — 150 — — 150 — — 150 µA
VEE = VEE (Min.) to VEE (Max.); VCC = GND
4
SY10EL58
SY100EL58
Micrel, Inc.
M9999-121205
hbwhelp@micrel.com or (408) 955-1690
8-PIN SOIC .150" WIDE (Z8-1)
Rev. 03
MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA
TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com
The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.
Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.
Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can
reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into
the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s
use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify
Micrel for any damages resulting from such use or sale.
© 2005 Micrel, Incorporated.
