REV. | D | A man +015 38 .010 [.25 UNLESS OTHERWISE NOTED DIMENSIONS ARE IN INCHES TITLE: TOLERANCES ARE: ONE PLACE DECIMALS + .1 TWO PLACE DECIMALS + .01 THREE PLACE DECIMALS + .005 FOUR PLACE DECIMALS + .0010 + LBS DOUBLE ROW ASSEMBLY ANGLES DWG NO: LBS1XX-X-X-D SHEET 1 OF 1 G Cc > G G LC] LC] SO OL YJ aN LC] V/ G G @l LC] Cc 1960 REF. = po ot = pO of = ) Of = po ot LBS1XXXX-D POSITION SPECIFICATION _| 01 THRU 36 "A= NO. OF POS. x .100 LEAD STYLE SPECIFICATION (SEE TABLE 1) [4.978] PLATING SPECIFICATIION -G: GOLD SPECIFY G IN TERMINAL SUFFIX X T: TIN SPECIFY T IN TERMINAL SUFFIX X L BODY SPECIFICATION USE LBS36D PROPRIETARY NOTE THIS DOCUMENT CONTAINS INFORMATION CONFIDENTIAL AND PROPRIETARY TO SAMTEC AND SHALL NOT BE OBTAINED WITHOUT THE EXPRESSED WRITTEN CONSENT OF SAMTEC INC. \/ f \ JN /N iN F: FLASH GOLD SPECIFY F IN TERMINAL SUFFIX X (SEE TABLE 1) 100 [2.54] REF "B +.008 [.20] | | NOTES: 1. MIN. PUSHOUT FORCE: 3 Ibs. 2. MAX. ALLOWABLE BOW AFTER ASSEMBLY: .003 [.08] in./in. 3. MAX. VARIATION BETWEEN ANY TWO PINS TO BE .010 [.25] MAX. 4. A\ REPRESENTS A CRITICAL DIMENSION FOR STATISTICAL L PROCESS CONTROL USE. 0 4.008 [.20] TABLE 1 STYLE 3 "c TERMINAL COMMENTS mor seve te ue A .210 [5.33] 125 [3.18] T1M7-01-X FOR USE WITH Tl [Ee c 1BS-DMKT B .335 [8.51] 125 [3.18] T1M702X STANDARD SS c 585 [14.86] 125 [3.18] T1M703X SOCKET STRIP O10 PRHONE (812) 844-6733 P.O. BOX 1147 CODE 55322 D 835 [21.21] 125 [3.18] T1M704X MADE BY GEE RNR | BSE Geom FG, PURVIS APPROVAL PAE LBS1XXXXD SHEET 1 OF 1