&DSDFLWRUVIRU$&0RWRU5XQ$SSOLFDWLRQV
Series/Type:%%0RWRU&DS
The following products presented in this data sheet are being withdrawn.
Ordering Code Substitute Product Date of
Withdrawal
Deadline Last
Orders
Last Shipments
B32321B7206J030 On request 2011-04-15 2011-07-29 2011-10-31
For further information please contact your nearest EPCOS sales office, which will also support
you in selecting a suitable substitute. The addresses of our worldwide sales network are
presented at www.epcos.com/sales.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
UL type (construction only)
Construction
Dielectric: polypropylene film
Plastic can and top UL 94 V2 material
Dry type
Features
Self-healing properties
Low dissipation factor
P0 safety class to IEC 60252-1 2001-02
High insulation resistance
UL file E 183224 (construction only)
Typical applications
For general sine wave applications,
mainly as motor run capacitor
Terminals
B32321 – Single Fast on: 6.3 × 0.8 mm
B32323 – Double Fast on: 6.3 × 0.8 mm
Mounting parts (optional)
Threaded stud at bottom of can (M8, max. torque = 5 Nm)
Fast fixation for mounting into a hole of Ø 8 mm
Technical data and specifications
Reference standards IEC 60252-1 2001-02 / UL 810
Safety class according IEC 60252-1 2001-02 P0
Life expectancy to IEC 60252 2001 250 V / 85 °C: 10,000 h (class B)
400 V / 85 °C: 10,000 h (class B)
480 V / 85 °C: 3,000 h (class C)
UL 810 file E 183224
for Nashik and Gravatai plant
Construction only
Rated capacitance CRSee dimensions table
Tolerance ±5%
Rated voltage VR250 V AC, 400 V AC, 480 V AC
Rated frequency fR50 / 60 Hz
FK PC PM AC July 2007
Please read the important notes, Page 2 of 9
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Maximum ratings
Maximum permissible voltage Vmax 1.1 · VR(VR= Rated voltage)
Maximum permissible current Imax 1.3 · IR(IR= Rated current)
Test data
AC test voltage terminal to terminal VTT 2 · VR, 2 s (routine test)
2 · VR, 60 s (type test)
Insulation resistance Rins or time constant τ
at 20 °C, rel. humidity ≤ 65%
(minimum as delivered values)
3,000 s
Dissipation factor tan δ at 20 °C ≤ 1.0 ·10-3 (120 Hz)
Maximum rate of voltage rise dV/dtmax 10 V/μs
Climatic data
Climatic category 25/085/21 to IEC 60068-1
Lower category Tmin –25 °C
Upper category Tmax +85 °C
Damp heat test ttest 21 days
Mechanical and thermal properties
Ball pressure test to IEC 60309-1 sec. 27.3 20 N at 125 °C
Plastic can and top disk material UL 94 V2 minimum
UL 94 V2 compatible
Glow wire test to IEC 60695-2-1/0 and –2-1/1
Test temp 550 °C for IR ≤ 0.5 A
Test temp 750 °C for IR > 0.5 A
Self extinguish within 30 seconds of
withdrawing the glow wire and without
igniting wrapping tissue.
Tracking test to IEC 60112 solution A > 250 V
Compatibility to RoHS
Compliance to directive 2002/95/EC
FK PC PM AC July 2007
Please read the important notes, Page 3 of 9
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Approvals
VDE EN 60252
400 V / 85 °C: 10,000 h (class B)
480 V / 85°C: 3,000 h (class C)
Approved
Approved
UL 810 E183224
250 V
400 V
480 V
Approved
Approved
Approved
FK PC PM AC July 2007
Please read the important notes, Page 4 of 9
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Dimensional drawings
B32321 B32323
FK PC PM AC July 2007
Please read the important notes, Page 5 of 9
cautions and warnings.
10
Stud M8x1.25
Nut M8x1.25
Star Washer 8mm
# = 3: Can with M8 bolt
10
10
M-Clip
10.2+0.1/-0
2.0±0.05
Ø2.2+0.1/-0
Ø8.2+0.2/-0
# = 5: Fast fix mounting
M8-sized
fast
fixation
# = 1: Can without mounting
Mounting options
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
Ordering codes and packing units
VR
V AC
CR
μF
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
250 2 25 × 58 30 × 62 B3232*C1205J0#0 112
3 25 × 58 30 × 62 B3232*C1305J0#0 112
4 25 × 58 30 × 62 B3232*C1405J0#0 112
5 25 × 58 30 × 62 B3232*C1505J0#0 112
6 25 × 58 30 × 62 B3232*C1605J0#0 112
7 25 × 58 30 × 62 B3232*C1705J0#0 112
8 25 × 58 30 × 62 B3232*C1805J0#0 112
9 30 × 62 30 × 62 B3232*C1905J0#0 112
10 30 × 62 30 × 62 B3232*C1106J0#0 112
12 30 × 62 30 × 62 B3232*C1126J0#0 112
14 30 × 62 30 × 62 B3232*C1146J0#0 112
15 30 × 62 30 × 62 B3232*C1156J0#0 112
16 35 × 62 35 × 62 B3232*C1166J0#0 84
18 35 × 62 35 × 62 B3232*C1186J0#0 84
20 35 × 62 35 × 62 B3232*C1206J0#0 84
22 35 × 62 35 × 62 B3232*C1226J0#0 84
25 35 × 71 35 × 71 B3232*C1256J0#0 84
30 35 × 71 35 × 71 B3232*C1306J0#0 84
35 40 × 71 40 × 71 B3232*C1356J0#0 60
40 40 × 71 40 × 71 B3232*C1406J0#0 60
45 40 × 71 40 × 71 B3232*C1456J0#0 60
50 40 × 95 40 × 98 B3232*C1506J0#0 60
55 40 × 95 40 × 98 B3232*C1556J0#0 60
60 40 × 95 40 × 98 B3232*C1606J0#0 60
FK PC PM AC July 2007
Please read the important notes, Page 6 of 9
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
VR
V AC
CR
µF
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
400 2 25 × 58 30 × 62 B3232*B4205J0#0 112
3 25 × 58 30 × 62 B3232*B4305J0#0 112
4 25 × 58 30 × 62 B3232*B4405J0#0 112
5 30 × 62 30 × 62 B3232*B4505J0#0 112
6 30 × 62 30 × 62 B3232*B4605J0#0 112
7 35 × 62 35 × 62 B3232*B4705J0#0 84
8 35 × 62 35 × 62 B3232*B4805J0#0 84
9 35 × 62 35 × 62 B3232*B4905J0#0 84
10 35 × 62 35 × 62 B3232*B4106J0#0 84
12 35 × 71 35 × 71 B3232*B4126J0#0 84
14 35 × 71 35 × 71 B3232*B4146J0#0 84
15 40 × 71 40 × 71 B3232*B4156J0#0 60
16 40 × 71 40 × 71 B3232*B4166J0#0 60
18 40 × 71 40 × 71 B3232*B4186J0#0 60
20 40 × 71 40 × 71 B3232*B4206J0#0 60
22 40 × 71 40 × 71 B3232*B4226J0#0 60
25 40 × 95 40 × 95 B3232*B4256J0#0 60
30 40 × 95 40 × 95 B3232*B4306J0#0 60
35 45 × 95 45 × 95 B3232*B4356J0#0 45
40 45 × 95 45 × 95 B3232*B4406J0#0 45
45 45 × 95 45 × 95 B3232*B4456J0#0 45
50 45 × 95 45 × 98 B3232*B4506J0#0 45
55 45 × 95 45 × 98 B3232*B4556J0#0 45
60 45 × 95 45 × 98 B3232*B4606J0#0 45
FK PC PM AC July 2007
Please read the important notes, Page 7 of 9
cautions and warnings.
Film capacitors – AC capacitors
Motor run capacitors B32321/B32323 MotorCap™
VR
V AC
CR
µF
Max. dimensions
d × l (mm)
B32321
Max. dimensions
d × l (mm)
B32323
Ordering code Packing units
pcs.
480 3 30 × 62 30 × 62 B3232*B7305J0#0 112
4 30 × 62 30 × 62 B3232*B7405J0#0 112
5 30 × 62 30 × 62 B3232*B7505J0#0 112
6 35 × 62 35 × 62 B3232*B7605J0#0 84
7 35 × 71 35 × 71 B3232*B7705J0#0 84
8 35 × 71 35 × 71 B3232*B7805J0#0 84
9 35 × 71 35 × 71 B3232*B7905J0#0 84
10 40 × 71 40 × 71 B3232*B7106J0#0 45
12 40 × 71 40 × 71 B3232*B7126J0#0 45
15 45 × 71 45 × 71 B3232*B7156J0#0 45
18 45 × 71 45 × 71 B3232*B7186J0#0 45
20 45 × 71 45 × 71 B3232*B7206J0#0 45
22 45 × 71 45 × 71 B3232*B7226J0#0 45
25 45 × 95 45 × 95 B3232*B7256J0#0 45
30 45 × 95 45 × 95 B3232*B7306J0#0 45
35 45 × 95 45 × 95 B3232*B7356J0#0 45
40 45 × 95 45 × 95 B3232*B7406J0#0 45
Composition of ordering code:
*: Terminals
21 single fast on terminals
23 double fast on terminals
#: Construction
1 plastic can
3 plastic can with M8 bolt
5 plastic can with fast fixation device, available for diameters 30 mm, 32 mm and 35 mm,
others on request
U Please read “Applications warning, installation and maintenance instructions” and the “General Safety Data Sheet for Power
Capacitors” issued by ZVEI, which are available on the internet at www.epcos.com/ac_capacitors, to ensure optimum performance and to
prevent products from failing, and in worst case, bursting and fire. Information given in the data sheet reflects typical specifications. You are
kindly requested to approve our product specifications or request our approval for your specification before ordering.
FK PC PM AC July 2007
Please read the important notes, Page 8 of 9
cautions and warnings.
Important notes
FK PC PM AC July 2007
The following applies to all products named in this publication:
1. Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application. As a
rule, EPCOS is either unfamiliar with individual customer applications or less familiar with them
than the customers themselves. For these reasons, it is always ultimately incumbent on the
customer to check and decide whether an EPCOS product with the properties described in the
product specification is suitable for use in a particular customer application.
2. We also point out that in individual cases, a malfunction of passive electronic components
or failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in which
the malfunction or failure of a passive electronic component could endanger human life or health
(e.g. in accident prevention or lifesaving systems), it must therefore be ensured by means of
suitable design of the customer application or other action taken by the customer (e.g. installation
of protective circuitry or redundancy) that no injury or damage is sustained by third parties in the
event of malfunction or failure of a passive electronic component.
3. The warnings, cautions and product specific notes must be observed.
4. In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as “hazardous”). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
5. We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently,
we cannot guarantee that all products named in this publication will always be available.
6. Unless otherwise agreed in individual contracts, all orders are subject to the current version of
the “General Terms of Delivery for Products and Services in the Electrical Industry”
published by the German Electrical and Electronics Industry Association (ZVEI).
7. The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSSP, MiniBlue, MKK, MLSC, MotorCap,
PCC, PhaseCap, PhaseMod, SIFI, SIKOREL, SilverCap, SIMDAD, SIMID, SineFormer, SIOV,
SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or pending in Europe and in
other countries. Further information will be found on the Internet at www.epcos.com/trademarks.
Page 9 of 9
