Central H11C4M PHOTO SCR OPTOCOUPLER TM Semiconductor Corp. DESCRIPTION: The Central Semiconductor H11C4M is a galliumarsenide infrared emitting Diode optically coupled with a light activated silicon controlled rectifier in a DIP-6 dual-in-line package. This device is designed for applications requiring a high degree of isolation between triggering and load circuits. MARKING: H11C4M DIP-6 CASE APPLICATIONS: * Communications equipment * Solid state relays * Portable equipment * Low power logic circuits requiring a high degree of input/output isolation FEATURES: * Forward current IF=50mA MAX (Input) * On-State current IT(RMS)=150mA (Input) * Reverse current IR=10A MAX (Input) * Blocking voltage VDRM, VRRM=400V MAX (Output) * Isolation test voltage 5000VRMS MAXIMUM RATINGS: (TA=25C) Isolation Voltage Isolation Resistance (@ VIO=500V) Operating Temperature Range Storage Temperature Range SYMBOL VISO RISO TJ Tstg 5000 1011 -30 to +100 -55 to +125 UNITS VRMS C C INPUT MAXIMUM RATINGS (LED): (TA=25C) Continuous Forward Current Continuous Reverse Voltage Peak Forward Surge Current (tp=1s) Power Dissipation SYMBOL IF VR IFSM PD 50 5.0 1.0 75 UNITS mA V A mW SYMBOL VDRM, VRRM VRGM IT(RMS) IT ITSM 400 6.0 150 10 5.0 UNITS V V mA A A OUTPUT MAXIMUM RATINGS (SCR): (TA=25C) Peak Repetitive Off-State Voltage Peak Reverse Gate Voltage RMS On-State Current Peak On-State Current (tp=100s) Peak One Cycle Surge (tp=10ms) INPUT ELECTRICAL CHARACTERISTICS: (TA=25C unless otherwise noted) SYMBOL TEST CONDITIONS MIN TYP IR VR=3.0V VF IF=10mA CJ VR=0V, f=1.0MHz 50 MAX 10 1.5 UNITS A V pF R2 (8-December 2008) Central TM Semiconductor Corp. H11C4M PHOTO SCR OPTOCOUPLER OUTPUT ELECTRICAL CHARACTERISTICS: (TA=25C unless otherwise noted) SYMBOL TEST CONDITIONS TYP MAX IDRM, IRRM VDRM, VRRM=400V, RGK=10k, TA=100C 150 VTM ITM=100mA 1.3 IGT VD=100V, RL=10k 50 VGT VD=100V, RL=10k 1.0 IH IT=100mA, RGK=27k 500 UNITS A V A V A COUPLER ELECTRICAL CHARACTERISTICS: (TA=25C unless otherwise noted) SYMBOL TEST CONDITIONS TYP MAX IFT VAK=50V, RGK=10k 20 IFT VAK=100V, RGK=27k 11 UNITS mA mA DIP-6 CASE - MECHANICAL OUTLINE LEAD CODE: 1) ANODE (LED) 2) CATHODE (LED) 3) NO CONNECTION 4) CATHODE (SCR) 5) ANODE (SCR) 6) GATE (SCR) MARKING: H11C4M R2 (8-December 2008)