1.5KE47A - COMCHIP TECHNOLOGY

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

• Working Peak Reverse Voltage Range − 5.8 V to 214 V

• Peak Power − 1500 Watts @ 1 ms

• ESD Rating of Class 3 (>16 kV) per Human Body Model

• Maximum Clamp Voltage @ Peak Pulse Current

• Low Leakage < 5 µA Above 10 V

• UL 497B for Isolated Loop Circuit Protection

• Response Time is Typically < 1 ns

• Pb−Free Packages are Available

Features

These devices are designed to protect voltage sensitive

components from high voltage, high−energy transients.

They have excellent clamping capability, high surge

capability, low zener impedance an d fast response time.

These devices are Littelfuse’s exclusive, cost-effective,

highly reliable, axial leaded package and are ideally-suited

for use in communication systems, numerical controls,

process controls, medical equipment, business machines,

power supplies and many other industrial/consumer

applications, to protect CMOS, MOS and Bipolar

integrated circuits.

Description

Rating Symbol Value Unit

Peak Power Dissipation (Note 1)

@ TL ≤ 25°C PPK 1500 W

Steady State Power Dissipation

@ TL ≤ 75°C, Lead Length = 3/8 ≤

Derated above TL = 75°C

PD5.0

mW/°C

Thermal Resistance,

Junction-to-Lead RθJL 20 °C/W

Forward Surge Current (Note 2)

@TA = 25°C IFSM 200 A

Operating and Storage

Temperature Range TJ, Tstg

−65 to

+175 °C/W

Maximum Ratings and Thermal Characteristics

1N6267A Series

Functional Diagram

Bi-directional

Uni-directional

Cathode Anode

Maximum ratings are those values beyond which device damage can occur. Maximum

ratings applied to the device are individual stress limit values (not normal operating

conditions) and are not valid simultaneously. If these limits are exceeded, device

functional operation is not implied, damage may occur and reliability may be affected.

1. Nonrepetitive current pulse per Figure 5 and derated above TA = 25C per Figure 2.

2. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses

per minute maximum.

NOTES: Please see 1.5KE6.8CA to 1.5KE250CA for Bidirectional Devices

Additional Information

Samples

Resources

Datasheet

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Electrical Characteristics (TA = 25 ° C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 3) = 53 A)

Device

JEDEC

Device†

(Note 4)

VRWM

(Note 5)

RWM

Breakdown Voltage VC @IPP (Volts)

(Note 7) CVBR

VBR (V) (Note 6) @ITVCIPP

(Volts) (µA) Min Nom Max (mA) (Volts) (A) (mV/°C)

1.5KE6.8A, G 1N6267A, G 5.8 1000 6.45 6.8 7.14 10 10.5 143 0.057

1.5KE7.5A, G 1N6268A, G 6.4 500 7. 1 3 7. 5 7.88 10 11. 3 132 0.061

1.5KE8.2A, G 1N6269A, G 7.02 200 7.79 8.2 8.61 10 12.1 124 0.065

1.5KE9.1A, G 1N6270A, G 7.78 50 8.65 9.1 9.55 113.4 112 0.068

1.5KE10A, G 1N6271A, G 8.55 10 9.5 10 10.5 114.5 103 0.073

1.5KE11A, G 1N6272A, G 9.4 510.5 11 11. 6 115.6 96 0.075

1.5KE12A, G 1N6273A, G 10.2 511. 4 12 12.6 116.7 90 0.078

1.5KE13A, G 1N6274A, G 11. 1 512.4 13 13.7 118.2 82 0.081

1.5KE15A, G 1N6275A, G 12.8 514.3 15 15.8 121.2 71 0.084

1.5KE16A, G 1N6276A, G 13.6 515.2 16 16.8 122.5 67 0.086

1.5KE18A, G 1N6277A, G 15.3 51 7. 1 18 18.9 125.2 59.5 0.088

1.5KE20A, G 1N6278A, G 1 7. 1 519 20 21 127.7 54 0.09

1.5KE22A, G 1N6279A, G 18.8 520.9 22 23.1 130.6 49 0.092

1.5KE24A, G 1N6280A, G 20.5 522.8 24 25.2 133.2 45 0.094

1.5KE27A, G 1N6281A, G 23.1 525.7 27 28.4 137.5 40 0.096

1.5KE30A, G 1N6282A, G 25.6 528.5 30 31.5 141.4 36 0.097

1.5KE33A, G 1N6283A, G 28.2 531.4 33 34.7 145.7 33 0.098

Symbol Parameter

IPP Maximum Reverse Peak Pulse Current

VCClamping Voltage @ IPP

VRWM Working Peak Reverse Voltage

IRMaximum Reverse Leakage Current @ VRWM

VBR Breakdown Voltage @ IT

ITTest Current

IFForward Current

VFForward Voltage @ IF

I-V Curve Characteristics (TA = 25ºC unless otherwise noted, VF = 3.5 V Max. @ IF (Note 3) = 100 A)

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Electrical Characteristics (TA = 25 ° C unless otherwise noted, VF = 3.5 V Max. @ IF (Note 3) = 53 A)

Device

JEDEC

Device†

(Note 4)

VRWM

(Note 5)

RWM

Breakdown Voltage VC @IPP (Volts)

(Note 7) CVBR

VBR (V) (Note 6) @ITVCIPP

(Volts) (µA) Min Nom Max (mA) (Volts) (A) (mV/°C)

1.5KE36A, G 1N6284A, G 30.8 534.2 36 37.8 149.9 30 0.099

1.5KE39A, G 1N6285A, G 33.3 537.1 39 41 153.9 28 0.1

1.5KE43A, G 1N6286A, G 36.8 540.9 43 45.2 159.3 25.3 0.101

1.5KE47A, G 1N6287A, G 40.2 544.7 47 49.4 164.8 23.2 0.101

1.5KE51A, G 1N6288A, G 43.6 548.5 51 53.6 170.1 21.4 0.102

1.5KE56A, G 1N6289A, G 47.8 553.2 56 58.8 177 19.5 0.103

1.5KE62A, G 1N6290A, G 53 558.9 62 65.1 185 1 7. 7 0.104

1.5KE68A, G 1N6291A, G 58.1 564.6 68 71.4 192 16.3 0.104

1.5KE75A, G 1N6292A, G 64.1 571.3 75 78.8 1103 14.6 0.105

1.5KE82A, G 1N6293A, G 70.1 577.9 82 86.1 1113 13.3 0.105

1.5KE91A, G 1N6294A, G 77.8 586.5 91 95.5 1125 12

1.5KE100A, G 1N6295A, G 85.5 595 100 105 1137 11 0.106

1.5KE110A, G 1N6296A, G 94 5105 110 116 1152 9.9 0.107

1.5KE120A, G 1N6297A, G 102 5114 120 126 1165 9.1 0.107

1.5KE130A, G 1N6298A, G 111 5124 130 137 1179 8.4 0.107

1.5KE150A, G 1N6299A, G 128 5143 150 158 1207 7. 2 0.108

1.5KE160A, G 1N6300A, G 136 5152 160 168 1219 6.8 0.108

1.5KE170A, G 1N6301A, G 145 5162 170 179 1234 6.4 0.108

1.5KE180A, G 1N6302A, G* 154 5171 180 189 1246 6.1 0.108

1.5KE200A, G 1N6303A, G 171 5190 200 210 12 74 5.5 0.108

1.5KE220A, G _185 5209 220 231 1328 4.6 0.109

1.5KE250A, G _214 5237 250 263 1344 50.109

Devices listed in bold italic are Littelfuse Preferred devices. Preferred devices are recommended choices for future use and best overall value.

3. 1/2 sine wave (or equivalent square wave), PW = 8.3 ms, duty cycle = 4 pulses per minute maximum.

4. Indicates JEDEC registered data

5. A transient suppressor is normally selected according to the maximum working peak reverse voltage (VRWM), which should be equal to or greater than the dc or

continuous peak operating voltage level.

6. VBR measured at pulse test current IT at an ambient temperature of 25C

7. Surge current waveform per Figure 5 and derate per Figures 1 and 2.

†The “G” sufﬁx indicates Pb−Free package available.

*Not Available in the 1500/Tape & Reel

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Figure 1. Pulse Rating Curve

Ratings and Characteristic Curves

Figure 2. Pulse Derating Curve

Figure 3. Capacitance versus Breakdown Voltage

VBR , BREAKDOWN VOLTAGE (VOLTS)

Figure 4. Steady State Power Derating Figure 5. Pulse Waveform

1N6373, ICTE-5, MPTE-5, through 1N6389, ICTE-45, C, MPTE-45, C 1N6267A/1.5KE6.8A through 1N6303A/1.5KE200A

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Figure 6. Dynamic Impedance

Ratings and Characteristic Curves

1N6373, ICTE-5, MPTE-5, through 1N6389, ICTE-45, C, MPTE-45, C 1.5KE6.8A through 1.5KE200A

Figure 7. Typical Derating Factor for Duty Cycle

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Application Notes

Response Time

In most applications, the transient suppressor device

is placed in parallel with the equipment or component

to be protected. In this situation, there is a time

delay associated with the capacitance of the device

and an overshoot condition associated with the

inductance of the device and the inductance of the

connection method. The capacitance effect is of minor

importance in the parallel protection scheme because

it only produces a time delay in the transition from the

operating voltage to the clamp voltage as shown in

Figure 8.

The inductive effects in the device are due to actual

turn-on time (time required for the device to go from

zero current to full current) and lead inductance. This

inductive effect produces an overshoot in the voltage

across the equipment or component being protected

as shown in Figure 9. Minimizing this overshoot is

very important in the application, since the main

purpose for adding a transient suppressor is to clamp

voltage spikes. These devices have excellent response

time, typically in the picosecond range and negligible

inductance. However, external inductive effects could

produce unacceptable overshoot. Proper circuit layout,

minimum lead lengths and placing the suppressor

device as close as possible to the equipment or

components to be protected will minimize this

overshoot. Some input impedance represented by Zin

is essential to prevent overstress of the protection

device. This impedance should be as high as possible,

without restricting the circuit operation.

Duty Cycle Derating

The data of Figure 1 applies for non-repetitive

conditions and at a lead temperature of 25ºC. If

the duty cycle increases, the peak power must

be reduced as indicated by the curves of Figure

7. Average power must be derated as the lead or

ambient temperature rises above 25ºC. The average

power derating curve normally given on data sheets

may be normalized and used for this purpose.

At ﬁrst glance the derating curves of Figure 7

appear to be in error as the 10 ms pulse has a higher

derating factor than the 10 µs pulse. However, when

the derating factor for a given pulse of Figure 7 is

multiplied by the peak power value of Figure 1 for the

same pulse, the results follow the expected trend.

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

UL Recognition*Typical Protection Circuit

Clipper Bi-Directional Devices

The entire series has Underwriters Laboratory

Recognition for the classiﬁcation of protectors

(QVGV2) under the UL standard for safety 497B

and File #116110. Many competitors only have one

or two devices recognized or have recognition in a

non-protective category. Some competitors have no

recognition at all. With the UL497B recognition, our

parts successfully passed several tests including

Strike Voltage Breakdown test, Endurance

Conditioning, Temperature test, Dielectric Voltage-

Withstand test, Discharge test and several more.

Whereas, some competitors have only passed a

ﬂammability test for the package material, we have

been recognized for much more to be included in

their Protector category.

*Applies to 1.5KE6.8A, CA thru 1.5KE250A, CA

1. Clipper-bidirectional devices are available in the

1.5KEXXA series and are designated with a “CA”

sufﬁx; for example, 1.5KE18CA. Contact your

nearest Littelfuse representative.

2. Clipper-bidirectional part numbers are tested

in both directions to electrical parameters in

preceding table (except for VF which does

not apply)

3. The 1N6267A through 1N6303A series are JEDEC

registered devices and the registration does not

include a “CA” sufﬁx. To order clipper-bidirectional

devices one must add CA to the 1.5KE device title.

Speciﬁcations are subject to change without notice.

Revised: 11/06/17

TVS Diodes

1500 Watt Zener Transient Voltage Suppressors

Dimensions

Part Marking System

NOTES:

1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982.

2. CONTROLLING DIMENSION: INCH.

3. LEAD FINISH AND DIAMETER UNCONTROLLED IN DIMENSION P.

4. 041A-01 THRU 041A-03 OBSOLETE, NEW STANDARD 041A-04.

Physical Speciﬁcations

Case Void-free, transfer-molded, thermosetting

plastic

Leads Modiﬁed L−Bend providing more contact

area to bond pads

Finish All external surfaces are corrosion

resistant and leads are readily solderable

Mounting Position Any

ORDERING INFORMATION

Device Package Shipping†

1.5KExxxA Axial Lead 500 Units/Box

1.5KExxxAG Axial Lead

(Pb−Free) 500 Units/Box

1.5KExxxARL4 Axial Lead 1500/Tape &

Reel

1.5KExxxARL4G Axial Lead

(Pb−Free)

1500/Tape &

Reel

1N6xxxA Axial Lead 500 Units/Box

1N6xxxAG Axial Lead

(Pb−Free) 500 Units/Box

1N6xxxARL4 Axial Lead 1500/Tape &

Reel

1N6xxxARL4G Axial Lead

(Pb−Free)

1500/Tape &

Reel

Flow/Wave Soldering (Solder Dipping)

Peak Temperature : 260OC

Dipping Time : 1/16” from the case for 10 seconds

Dim

Inches Millimeters

Min Max Min Max

A0.335 0.374 8.50 9.50

B0.189 0.209 4.80 5.30

D0.038 0.042 0.96 1.06

K1.000 --- 25.40 ---

P--- 0.050 --- 1.27

Disclaimer Notice - Information furnished is believed to be accurate and

reliable. However, users should independently evaluate the suitability of and

test each product selected for their own applications. Littelfuse products are

not designed for, and may not be used in, all applications. Read complete

Disclaimer Notice at: www.littelfuse.com/disclaimer-electronics.

A= Assembly Location

1.5KExxxA= ON Device Code

1N6xxxA= JEDEC Device Code

YY = Year

WW = Work Week

= (See Table on Page 3)

(Note: Microdot may be in either location)

1.5KE

xxxA

1N6

xxxA

YYWW