Only One Name Means ProTek’Tion™
The SMSxx and SMSxxC series are subminiature monolithic TVS suppressor arrays designed for the protecon of sensi-
ve IC components from the damaging eects of Electrostac Discharge (ESD). This series is ideally suited for use in
portable electronics such as SMART phones, laptops, and other wireless devices.
The SMSxx and SMSxxC series is usable on I/O ports where the signal voltage is posive. These devices will also
provide protecon in accordance with IEC 61000-4-2 and IEC 61000-4-4 requirements. This series is available in a SOT-
23-6 package conguraon and is rated at 350 Was peak pulse power (8/20µs) per line.
• Compable with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
• Compable with IEC 61000-4-4 (EFT): 40A, 5/50ns
• Compable with IEC 61000-4-5 (Surge): 12A, 8/20µs - Level 1(Line-
Gnd) & Level 2(Line-Line)
• 350 Was Peak Pulse Power per Line(tp = 8/20µs)
• Monolithic Design
• Protects 4 Lines
• Unidireconal & Bidireconal Conguraons
• ESD Protecon > 25 kilovolts
• Low Clamping Voltage
• Low Leakage Current
• Avaiable in Mulple Voltages
• RoHS Compliant
• REACH Compliant
• Molded JEDEC SOT-23-6 Package
• Approximate Weight: 16 milligrams
• Lead-Free Pure-Tin Plang (Annealed)
• Solder Reow Temperature:
Pure-Tin - Sn, 100: 260-270°C
• Flammability Rang UL 94V-0
• 8mm Tape and Reel per EIA Standard 481
• SMART Phones
• Portable Electronics
• FireWire, Ethernet and USB Interfaces
16
5
2
34
16
5
2
34
UNIDIRECTIONAL BIDIRECTIONAL
Only One Name Means ProTek’Tion™
Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 350 Was
Operang Temperature TL-55 to 150 °C
Storage Temperature TSTG -55 to 150 °C
SMS05 PRH 5.0 6.0 9.8 20 150
SMS05C PRL 5.0 6.0 9.8 20 150
SMS12 PRI 12.0 13.3 19.0 1 80
SMS12C PRM 12.0 13.3 19.0 1 80
SMS15 PRJ 15.0 16.7 24.0 1 50
SMS15C PRN 15.0 16.7 24.0 1 50
SMS24 PRK 24.0 26.7 40.0 1 40
SMS24C PRO 24.0 26.7 40.0 1 40
1. Part numbers with an addional “C” sux are bidireconal, i.e., SMS05.
2. Unidireconal Only: For SMSxx, test between pin 1 to 2 or 5, 4 to 2 or 5, 6 to 2 or 5, 3 to 2 or 5. For SMSxxC, test between 2 to 1, 3, 4, 5, or 6.
3. Bidireconal Only: For SMSxxC, test between pin 5 to 1 or 3 or 4 or 6. Electrical characteriscs apply in both direcons.
4. Unidireconal Only: For SMSxx, capacitance measured between pins 1, 3, 4, 6 to 2. For SMSxxC, capacance measured between pins 2 to 1, 3, 4, 5, or 6.
Only One Name Means ProTek’Tion™
350W, 8/20µs Waveform
Peak Pulse Power
8/20µs
Average Power
TEST
WAVEFORM
PARAMETERS
tf = 8µs
td = 20µs
tf
e-t
Peak Value IPP
td = t/(IPP/2)
Only One Name Means ProTek’Tion™
Only One Name Means ProTek’Tion™
Circuit connecvity is as follows:
• Line 1 connected to pin 1.
• Line 2 connected to pin 3.
• Line 3 connected to pin 4.
• Line 4 connected to pin 6.
• Pin 5 connected to ground.
• Pin 6 not connected.
Circuit board layout is crical for electromagnec compability protecon. The following guidelines are recommended:
• The protecon device should be placed near the input terminals or connectors, the device will divert the transient current
immediately before it can be coupled into the nearby traces.
• The path length between the TVS device and the protected line should be minimized.
• All conducve loops including power and ground loops should be minimized.
• The transient current return path to ground should be kept as short as possible to reduce parasic inductance.
• Ground planes should be used whenever possible. For mullayer PCBs, use ground vias.
1
6
5
2
3
4
Line 1
Line 2
Line 3
Line 4
I/O Port
1
6
5
2
3
4
Line 1
Line 2
Line 3
Line 4
I/O Port
Circuit connecvity is as follows:
• Line 1 connected to pin 1.
• Line 2 connected to pin 3.
• Line 3 connected to pin 4.
• Line 4 connected to pin 5.
• Pin 6 connected to ground.
• Pin 2 not connected.
Only One Name Means ProTek’Tion™
A 2.80 3.05 0.110 0.120
B 1.50 1.75 0.059 0.070
C 0.90 1.30 0.036 0.051
D 0.30 0.40 0.012 0.016
E 0.85 1.05 0.033 0.040
G 0.90 1.45 0.036 0.057
J 0.09 0.20 0.003 0.008
K 2.60 3.00 0.102 0.118
L 0.0 0.15 0.0 0.006
M 0.30 0.60 0.012 0.024
1. Controlling dimension: inches.
2. Dimensioning and tolerances per ANSI Y14.5M, 1985.
3. Dimensions are exclusive of mold ash and metal burrs.
A 0.70 0.028
B 1.90 0.074
C 0.95 0.037
D 2.40 0.094
E 1.00 0.039
1. Controlling dimension: inches.
D
E
K
4
56
3
2
1
A
G
C
L
BM
0° - 8°
J
D
C
B
A
E
Only One Name Means ProTek’Tion™
178mm (7”) 8mm 3.20 ± 0.10 3.20 ± 0.10 1.65 ± 0.10 1.50 ± 0.10 1.75 ± 0.10 3.50 ± 0.05 8.00 ± 0.30 4.00 ± 0.10 2.00 ± 0.05 4.00 ± 0.10 0.25
1. Dimensions are in millimeters.
2. Surface mount product is taped and reeled in accordance with EIA-481.
3. Sux - T7 = 7” Reel - 3,000 pieces per 8mm tape.
4. Marking on Part - marking code (see page 2) and pin one dened by dot on package.
Package outline, pad layout and tape specicaons per document number 06013.R5 2/11
SMSxx/SMSxxC -LF -T7 3,000 7” n/a
This device is only available in a Lead-Free conguraon.
Top Cover Tape
K0
D
P0
P2
10 Pitches Cumulave
Tolerance on Tape. ± 0.2
A0
B0
P
E
F
W
User Direcon of Feed
Pin 1
t
Only One Name Means ProTek’Tion™
COPYRIGHT © ProTek Devices 2001 - This literature is subject to all applicable copyright laws and is not for resale in any manner.
SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteriscs described herein without noce.
DESIGN CHANGES: ProTek reserves the right to disconnue product lines without noce and that the nal judgement concerning selecon and specicaons is the buyer’s and that in furnishing engineering
and technical assistance. ProTek assumes no responsibility with respect to the selecon or specicaons of such products. ProTek makes no warranty, representaon or guarantee regarding the suitability of
its products for any parcular purpose, nor does ProTek assume any liability arising out of the applicaon or use of any product or circuit and specically disclaims any and all liability without limitaon special,
consequenal or incidental damages.
LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without wrien consent from the factory.
In business more than 20 years, ProTek Devices™ is a privately-held company located in Tempe, Arizona, that oers a product line of tran-
sient voltage suppressors (TVS); avalanche breakdown diodes; steering diode TVS arrays and other surge suppressor component products.
These TVS devices protect electronic systems from the eects of lightning, electrostac discharge (ESD), nuclear electromagnec pulses
(NEMP), inducve switching and EMI / RFI. ProTek Devices also oers high performance interface and linear products that include analog
switches; mulplexers; LED drivers; audio control ICs; RF and related high frequency products. The analog devices work in a host of con-
sumer; industrial; automove and other applicaons.
2929 South Fair Lane
Tempe, Arizona 85282
USA
General: 602-431-8101
Sales: & Markeng: 602-414-5109
Customer Service: 602-414-5114
Product Technical Support: 602-414-5107
General: 602-431-2288
Sales: sales@protekdevices.com
Customer Service: service@protekdevices.com
Technical Support: support@protekdevices.com
8 Ubi Road 2, #06-19
Zervex
Singapore - 408538
Tel: +65-67488312
Fax: +65-67488313
www.protekdevices.com
