MAC97A8@116 - NXP SEMICONDUCTORS

1. Product profile

1.1 General description

PNP/PNP Resistor-Equipped Transistors (RET) in Surface-Mounted Device (SMD) plastic

packages.

1.2 Features and benefits

1.3 Applications

Low current peripheral driver

Control of IC inputs

Replaces general-purpose transistors in digital applications

1.4 Quick reference data

PEMB11; PUMB11

PNP/PNP resistor-equipped transistors;

R1 = 10 k, R2 = 10 k

Rev. 3 — 30 November 2011 Product data sheet

Table 1. Product overview

Type number Package NPN/PNP

complement NPN/NPN

complement Package

configuration

NXP JEITA

PEMB11 SOT666 - PEMD3 PEMH11 ultra small and flat lead

PUMB11 SOT363 SC-88 PUMD3 PUMH11 very small

100 mA output current capability Reduces component count

Built-in bias resistors Reduces pick and place costs

Simplifies circuit design AEC-Q101 qualified

Table 2. Quick reference data

Symbol Parameter Conditions Min Typ Max Unit

Per transis tor

VCEO collector-emitter voltage open base - - 50 V

IOoutput current - - 100 mA

R1 bias resistor 1 (input) 7 10 13 k

R2/R1 b ias resis tor ratio 0.8 1.0 1.2

Product data sheet Rev. 3 — 30 November 2011 2 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

2. Pinning information

3. Ordering information

4. Marking

[1] * = placeholder for manufacturing site code.

Table 3. Pinning

Pin Description Simplified outline Graphic symbol

1 GND (emitter) TR1

2 input (base) TR1

3 output (collector) TR2

4 GND (emitter) TR2

5 input (base) TR2

6 output (collector) TR1

001aab555

6 45

1 32

006aaa212

R1 R2

TR1 TR2

213

Table 4. Orderin g information

Type number Package

Name Description Version

PEMB11 - plastic surface-mounted package; 6 leads SOT666

PUMB11 SC-88 plastic surface-mounted package; 6 leads SOT363

Table 5. Marking codes

Type number Marking code[1]

PEMB11 B1

PUMB11 B*1

Product data sheet Rev. 3 — 30 November 2011 3 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

5. Limiting values

[1] Device mounted on an FR4 Printed-Circuit Board (PCB), single-sided copper, tin-plated and standard

footprint.

[2] Reflow soldering is the only recommended soldering method.

Table 6. Limiting values

In accordance with the Absolute Maximum Rating System (IEC 60134).

Symbol Parameter Conditions Min Max Unit

Per transis tor

VCBO collector-base voltage open emitter - 50 V

VCEO collector-emitter voltage open base - 50 V

VEBO emitter-base voltage open collector - 10 V

VIinput voltage

positive - +10 V

negative - 40 V

IOoutput current - 100 mA

ICM peak collector current - 100 mA

Ptot total power dissipation Tamb 25 C[1]

PEMB11 (SOT666) [2] -200mW

PUMB11 (SOT363) - 200 mW

Per device

Ptot total power dissipation Tamb 25 C[1]

PEMB11 (SOT666) [2] -300mW

PUMB11 (SOT363) - 300 mW

Tjjunction temperature - 150 C

Tamb ambient temperature 65 +150 C

Tstg storage temperature 65 +150 C

Product data sheet Rev. 3 — 30 November 2011 4 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

6. Thermal characteristics

[1] Device mounted on an FR4 PCB, single-sided copper, tin-plated and standard footprint.

[2] Reflow soldering is the only recommended soldering method.

FR4 PCB, standard footprint

Fig 1. Per device: Power derating curve for SOT363 (SC-88) and SOT 666

Tamb (°C)

-75 17512525 75-25

006aac749

200

100

300

400

Ptot

(mW)

Table 7. Thermal characteris tics

Symbol Parameter Conditions Min Typ Max Unit

Per transis tor

Rth(j-a) thermal resistance from

junction to ambient in free air [1]

PEMB11 (SOT666) [2] --625K/W

PUMB11 (SOT363) - - 625 K/W

Per device

Rth(j-a) thermal resistance from

junction to ambient in free air [1]

PEMB11 (SOT666) [2] --417K/W

PUMB11 (SOT363) - - 417 K/W

Product data sheet Rev. 3 — 30 November 2011 5 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

FR4 PCB, standard footprint

Fig 2. Transient thermal impedance from junction to ambient as a function of pulse duration for

PEMB11 (SOT666); typical values

FR4 PCB, standard footprint

Fig 3. Transient thermal impedance from junction to ambient as a function of pulse duration for

PUMB11 (SOT363); typical values

006aac751

10-5 1010-2

10-4 102

10-1 tp (s)

10-3 103

102

103

Zth(j-a)

(K/W)

duty cycle = 1

0.75 0.5

0.33 0.2

0.1

0.05

0.02 0.01

006aac750

10-5 1010-2

10-4 102

10-1 tp (s)

10-3 103

102

103

Zth(j-a)

(K/W)

duty cycle = 1

0.75 0.5

0.33

0.2

0.1 0.05

0.02 0.01

Product data sheet Rev. 3 — 30 November 2011 6 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

7. Characteristics

[1] Characteristics of built-in transistor.

Table 8. Characteristics

Tamb = 25



C unless otherwise specified.

Symbol Parameter Conditions Min Typ Max Unit

Per transis tor

ICBO collector-base

cut-off current VCB =50 V; IE=0A - - 100 nA

ICEO collector-emitter

cut-off current VCE =30 V; IB=0A - - 1A

VCE =30 V; IB=0A;

Tj= 150 C--5A

IEBO emitter-base

cut-off current VEB =5V; I

C=0A - - 400 A

hFE DC current gain VCE =5V; I

C=5mA 30 - -

VCEsat collector-emitter

saturation voltage IC=10 mA; IB=0.5 mA - - 150 mV

VI(off) off-state input

voltage VCE =5V; I

C=100 A-1.1 0.8 V

VI(on) on-state input

voltage VCE =0.3 V; IC=10 mA 2.5 1.8 - V

R1 bias resistor 1 (input) 7 10 13 k

R2/R1 bias resistor ratio 0.8 1.0 1.2

Cccollector capacitance VCB =10 V; IE=i

e=0A;

f=1MHz --3pF

fTtransition frequency VCB =5V; I

C=10 mA;

f = 100 MHz [1] - 180 - MHz

Product data sheet Rev. 3 — 30 November 2011 7 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

VCE =5V

(1) Tamb = 100 C

(2) Tamb =25C

(3) Tamb =40 C

IC/IB=20

(1) Tamb = 100 C

(2) Tamb =25C

(3) Tamb =40 C

Fig 4. DC current gain as a function of collector

current; typical values Fig 5. Collector-emitter satu ra tion voltage as a

function of collector current; typical values

VCE =0.3 V

(1) Tamb =40 C

(2) Tamb =25C

(3) Tamb = 100 C

VCE =5V

(1) Tamb =40 C

(2) Tamb =25C

(3) Tamb = 100 C

Fig 6. On-state input voltage as a function of

collector current; typical valu es Fig 7. Off-state input voltage as a function of

collector current; typical values

IC (mA)

-10-1 -102

-10-1

006aac773

102

103

hFE

(1)

(2)

(3)

IC (mA)

-1 -102

-10

006aac774

-10-1

-1

VCEsat

(V)

-10-2

(1)

(2)

(3)

006aac775

IC (mA)

-10-1 -102

-10-1

-1

-10

VI(on)

(V)

-10-1

(1)

(2)

(3)

IC (mA)

-10-1 -10-1

006aac776

-1

-10

VI(off)

(V)

-10-1

(1)

(2)

(3)

Product data sheet Rev. 3 — 30 November 2011 8 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

8. Test information

8.1 Quality information

This product has been qualified in accordance with the Automotive Electronics Council

(AEC) standard Q101 - Stress test qualification for discrete semiconductors, and is

suitable for use in automotive applications.

9. Package outline

f = 1 MHz; Tamb =25CV

CE =5V; T

amb =25C

Fig 8. Collector capacitance as a function of

collector-base voltage; typical values Fig 9. Transition frequency as a function of collector

current; typical values of built-in transistor

VCB (V)

0 -50-40-20 -30-10

006aac777

(pF)

006aac763

IC (mA)

-10-1 -102

-10-1

102

103

(MHz)

Fig 10. Package outline PEMB11 (SOT666) Fig 11. Package outline PUMB11 (SOT363/SC-88)

Dimensions in mm 04-11-08

1.7

1.5

1.7

1.5

1.3

1.1

0.18

0.08

0.27

0.17

0.5

pin 1 index

123

456

0.6

0.5

0.3

0.1

06-03-16Dimensions in mm

0.25

0.10

0.3

0.2

pin 1

index

1.3

0.65

2.2

2.0 1.35

1.15

2.2

1.8 1.1

0.8

0.45

0.15

132

465

Product data sheet Rev. 3 — 30 November 2011 9 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

10. Packing information

[1] For further information and the availability of packing methods, see Section 14.

[2] T1: normal taping

[3] T2: reverse taping

11. Soldering

Table 9. Packing methods

The indicated -xxx are the last thre e digits of the 12NC ordering code.[1]

Type number Package Description Packing quantity

3000 4000 8000 10000

PEMB11 SOT666 2 mm pitch, 8 mm tape and reel - - -315 -

4 mm pitch, 8 mm tape and reel - -115 - -

PUMB11 SOT363 4 mm pitch, 8 mm tape and reel; T1 [2] -115 - - -135

4 mm pitch, 8 mm tape and reel; T2 [3] -125 - - -165

Reflow soldering is the only recommended soldering method.

Fig 12. Reflow soldering footprint PEMB11 (SOT666)

solder lands

placement area

occupied area

solder paste

sot666_fr

2.75

2.45

2.1

1.6

0.4

(6×)

0.55

(2×)

0.25

(2×)

0.6

(2×)

0.65

(2×)

0.3

(2×)

0.325

(4×)

0.45

(4×)

0.5

(4×)

0.375

(4×)

1.72

1.7

1.0750.538

Dimensions in mm

Product data sheet Rev. 3 — 30 November 2011 10 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

Fig 13. Reflow soldering footprint PUMB11 (SOT363/SC-88)

Fig 14. W ave soldering footprint PUMB1 1 (SOT363/SC-88)

solder lands

solder resist

occupied area

solder paste

sot363_fr

2.65

2.35 0.4 (2×)

0.6

(2×)

0.5

(4×)

0.5

(4×)

0.6

(4×)

0.6

(4×)

1.5

1.8

Dimensions in mm

sot363_fw

solder lands

solder resist

occupied area

preferred transport

direction during soldering

5.3

1.3 1.3

1.5

0.3

1.5

4.5

2.45

2.5

Dimensions in mm

Product data sheet Rev. 3 — 30 November 2011 11 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

12. Revision history

Table 10. Revision history

Document ID Release date Data sheet status Change notice Supersedes

PEMB11_PUMB11 v.3 20111130 Product data sheet - PEMB11_PUMB11 v.2

Modifications: •The format of this document has been redesigned to comply with the new identity

guidelines of NXP Semiconductors.

•Legal texts have been adapted to the new company name where appropriate.

•Section 1 “Product profile”: updated

•Section 4 “Marking”: updated

•Table 7 “Thermal characteristics”: updated according to th e latest measurements

•Table 8 “Characteristics”: ICEO updated according to the latest measurements, Vi(on) and

Vi(off) changed respectively to VI(on) and VI(off), fT added

•Figure 1 to 9: added

•Section 8 “Test information”: added

•Figure 11 and 10: replaced by minimized package outline drawings

•Section 10 “Packing information”: added

•Section 11 “Soldering”: added

•Section 13 “Legal information”: updated

PEMB11_PUMB11 v.2 20 031003 Product data sheet - PEMB11 v.1

PUMB11 v.1

PEMB11 v.1 20010913 Preliminary specification - -

PUMB11 v.1 20000808 Product specification - -

Product data sheet Rev. 3 — 30 November 2011 12 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

13. Legal information

13.1 Data sheet status

[1] Please consult the most recently issued document before initiating or completing a design.

[2] The term ‘short data sheet’ is explained in section “Definitions”.

[3] The product status of de vice(s) descr ibed in th is docume nt may have cha nged since this docume nt was publis hed and ma y dif fer in case of multiple devices. The latest product status

information is available on the Internet at URL http://www.nxp.com.

13.2 Definitions

Draft — The document is a draft version only. The content is still under

internal review and subject to formal approval, which may result in

modifications or additions. NXP Semiconductors does not give any

representations or warranties as to the accuracy or completeness of

information included herein and shall have no liab ility for the consequences of

use of such information.

Short data sheet — A short dat a sheet is an extract from a full data sheet

with the same product type number(s) and tit le. A short data sh eet is intended

for quick reference only and shou ld not be rel ied u pon to cont ain det ailed and

full information. For detailed and full information see the relevant full data

sheet, which is available on request via the local NXP Semiconductors sales

office. In case of any inconsistency or conflict with the short data sheet, the

full data sheet shall pre vail.

Product specificat io n — The information and data provided in a Product

data sheet shall define the specification of the product as agreed be tween

NXP Semiconductors and its customer, unless NXP Semiconductors and

customer have explicitly agreed otherwise in writing. In no event however,

shall an agreement be valid in which the NXP Semiconductors product is

deemed to off er functions and qualities beyond those described in the

Product data sheet.

13.3 Disclaimers

Limited warr a nty and liability — Information in this document is believed to

be accurate and reliable. However, NXP Semiconductors does not give any

representations or warranties, expressed or implied, as to the accuracy or

completeness of such information and shall have no liability for the

consequences of use of such information.

In no event shall NXP Semiconductors be liable for any indirect, incidental,

punitive, special or consequ ential damages (including - wit hout limitatio n - lost

profits, lost savings, business interruption, costs related to the removal or

replacement of any products or rework charges) whether or not such

damages are based on tort (including negligence), warranty, breach of

contract or any other legal theory.

Notwithstanding any damages that customer might incur for any reason

whatsoever, NXP Semiconductors’ aggreg ate and cumulative li ability towards

customer for the products described herein shall be limited in accordance

with the Terms and conditions of commercial sale of NXP Semiconductors.

Right to make changes — NXP Semiconductors reserves the right to make

changes to information published in this document, including without

limitation specifications and product descriptions, at any time and without

notice. This document supersedes and replaces all informa tion supplied prior

to the publication hereof .

Suitability for use — NXP Semiconductors products are not designed,

authorized or warranted to be suit able for use in life support, life-critical or

safety-critical systems or equipment, nor in applications where failure or

malfunction of an NXP Semiconductors product can reasonably be expected

to result in perso nal injury, death or severe property or envi ronmental

damage. NXP Semiconductors accepts no liab ility for inclusion and/or use of

NXP Semiconductors products in such equipment or applications and

therefore such inclusion and/or use is at the customer’s own risk.

Applications — Applications that are described herein for any of these

products are for il lustrative purposes only. NXP Semiconductors makes no

representation or warranty tha t such application s will be suitable for the

specified use without further testing or modification.

Customers are responsible for the design and ope ration of their applications

and products using NXP Semiconductors product s, and NXP Semiconductors

accepts no liability for any assistance with applications or customer product

design. It is customer’s sole responsibility to determine whether the NXP

Semiconductors product is suit able and fit for the custome r’s applications and

products planned, as well as fo r the planned application and use of

customer’s third party customer(s). Customers should provide appropriate

design and operating safeguards to minimize the risks associated with their

applications and products.

NXP Semiconductors does not accept any liability rela ted to any default,

damage, costs or problem which is based on any weakness or default in the

customer’s applications or products, or the application or use by customer’s

third party customer(s). Customer is responsible for doing all necessary

testing for th e customer’s applications and products using NXP

Semiconductors products in order to avoid a default of the applications and

the products or of the application or use by customer’s third party

customer(s). NXP does not accept any liability in this respect.

Limiting values — Stress above one or more limiting values (as defined in

the Absolute Maximum Ratings System of IEC 60134) will cause permanent

damage to the device. Limiting values are stress ratings only and (proper)

operation of the device at these or any other conditions above those given in

the Recommended operating conditions section (if present) or the

Characteristics sections of this document is not warranted. Constant or

repeated exposure to limiting values will permanent ly and irreversibly affect

the quality and reliability of the device.

Terms and conditions of commercial sale — NXP Semiconductors

products are sold subject to the general terms and conditions of commercial

sale, as published at http://www.nxp.com/profile/terms, unless otherwise

agreed in a valid written individua l agreement. In case an individual

agreement is concluded only the ter ms and conditions of the respective

agreement shall apply. NXP Semiconductors hereby expressly objects to

applying the customer’s general terms and conditions with regard to the

purchase of NXP Semiconductors products by customer.

No offer to sell or license — Not hing in this document may be interpret ed or

construed as an of fer t o sell product s that is open for accept ance or t he grant,

conveyance or implication of any license under any copyri ghts, patents or

other industrial or intellectual property rights.

Export control — This document as well as the item(s) described herein

may be subject to export control regulatio ns. Export might require a prior

authorization from competent authorities.

Document status[1][2] Product status[3] Definition

Objective [short] data sheet Development This document contain s data from the objective specification for product development.

Preliminary [short] dat a sheet Qualification This document contains data from the preliminary specification.

Product [short] dat a sheet Production This document contains the product specification.

Product data sheet Rev. 3 — 30 November 2011 13 of 14

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

Quick reference data — The Quick reference data is an extract of the

product data given in the Limiting values and Characteristics sections of this

document, and as such is not complete, exhaustive or legally binding.

13.4 Trademarks

Notice: All refe renced brands, produc t names, service names and trademarks

are the property of their respect i ve ow ners.

14. Contact information

For more information, please visit: http://www.nxp.com

For sales office addresses, please send an email to: salesaddresses@nxp.com

NXP Semiconductors PEMB11; PUMB11

PNP/PNP resistor-equipped transistors; R1 = 10 k, R2 = 10 k

For more information, please visit: http://www.nxp.co m

For sales office addresses, please send an email to: salesaddresses@nxp.com

Date of release: 30 November 2011

Document identifier: PEMB11_PUMB11

Please be aware that important notices concerning this document and the product(s)

described herein, have been included in section ‘Legal information’.

15. Contents

1 Product profile . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.1 General description . . . . . . . . . . . . . . . . . . . . . 1

1.2 Features and benefits. . . . . . . . . . . . . . . . . . . . 1

1.3 Applications . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

1.4 Quick reference data . . . . . . . . . . . . . . . . . . . . 1

2 Pinning information. . . . . . . . . . . . . . . . . . . . . . 2

3 Ordering information. . . . . . . . . . . . . . . . . . . . . 2

4 Marking. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

5 Limiting values. . . . . . . . . . . . . . . . . . . . . . . . . . 3

6 Thermal characteristics . . . . . . . . . . . . . . . . . . 4

7 Characteristics. . . . . . . . . . . . . . . . . . . . . . . . . . 6

8 Test information. . . . . . . . . . . . . . . . . . . . . . . . . 8

8.1 Quality information . . . . . . . . . . . . . . . . . . . . . . 8

9 Package outline . . . . . . . . . . . . . . . . . . . . . . . . . 8

10 Packing information . . . . . . . . . . . . . . . . . . . . . 9

11 Soldering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

12 Revision history. . . . . . . . . . . . . . . . . . . . . . . . 11

13 Legal information. . . . . . . . . . . . . . . . . . . . . . . 12

13.1 Data sheet status . . . . . . . . . . . . . . . . . . . . . . 12

13.2 Definitions. . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13.3 Disclaimers. . . . . . . . . . . . . . . . . . . . . . . . . . . 12

13.4 Trademarks. . . . . . . . . . . . . . . . . . . . . . . . . . . 13

14 Contact information. . . . . . . . . . . . . . . . . . . . . 13

15 Contents . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14