Coin Cell Holder PICK & PLACE READY BY DESIGN Battery Retainer for O20mm Coin Cell Horizontal designs are tape & reel packaged for auto placement. Highly effective retention of coin cell batteries. Eliminates the need for soldered-in cells. Vertical mount minimises PCB real estate usage. Low profile design available with dual independent contact points for enhanced electrical reliability. Accomodates CR2032 and similar coin cell batteries. standard Low profile Packaging Packaging Format: Reel quantity: Suitable for battery size: Tape & Reel 550 on a O330mm reel CR2016, CR2025, CR2032 Format: Reel quantity: Suitable for battery size: 15.60 21.10 Tape & Reel 500 on a O330mm reel CR2032 2.60 5.40 (O 22.30) 5.10 19.90 3.00 31.10 23.79 4.00 square 18.40 11.40 4.00 5.50 square 30.70 Negative contact 3.00 3.60 Recommended PC Board Pattern Recommended PC Board Pattern 13.00 Vertical 22.90 5.70 Packaging Format: Suitable for battery size: Loose (Tray) CR2032 16.90 5.00 3 x 0 0.90 EZ-BoardWare 0.60 5.00 10.00 0.30 3.20 3.20 10.00 3.30 Recommended PC Board Pattern HOW TO ORDER S8 XXX - XX R Packaging R Series code Tape & Reeled Blank Loose (S8401) tYPE Finish 211 Low Profile 401 Vertical 45 Gold (S8421) 421 Standard 46 Tin (S8201, S8401) All dimensions in mm. www.harwin.com 186