NOTES: THIRD ANGLE PROJ. @ G REVISIONS REV DESCRIPTION DATE ECO APPR |. MATERIALS OF CONSTRUCTION: 3, MECHANICAL: ; SELEASE 10 WEG) S-Way-18 | 081021 BEN COUPLING NUT - STAINLESS STEEL, PASSIVATED A. DURABILITY: SMA PLUG SIDE : 500 CYCLES MIN. SMA BODY - STAINLESS STEEL, PASSIVATED P-SMP JACK SIDE: 100 CYCLES MIN WHEN MATED WITH FULL DETENT PLUG P-SMP BODY - BERYLLIUM COPPER, GOLD PLATING 100 CYCLES MIN WHEN MATED WITH LIMITED DETENT PLUG CONTACT PIN - BERYLLIUM COPPER, GOLD PLATING 1000 CYCLES MIN WHEN MATED WITH A SMOOTH BORE PLUG GASKET - SILICONE RUBBER, RED B. TEMPERATURE RANGE: -55C TO +#155C PT RETAINER RING - SUS 304, NATURAL LAN INSULATOR - PTFE, NATURAL 4. PACKAGING: (UTE A. QUANTITY: SINGLE PACK a 2. ELECTRICAL: B. MARKING: BAG TO BE MARKED KAW A. IMPEDANCE: 50 OHM, NOMINAL "AMPHENOL RF, AD-SMAP-PSMPJ-1, AND DATE CODE" B. FREQUENCY RANGE: DC - 10 GHz C. RETURN LOSS(VSWR): 38 dB MIN.@ DC-4 GHz 26 dB MIN.@ 4-10 GHz INSERTION LOSS: 0.05X./nore) dB MAX. SCALE 4.000 D. E. POWER HANDLING: 200W MAX.@ 2.2 GHz AT 20C F . D.W.V: 1000 VRMS, MIN. y8 [.315] HEX. P-SMP JACK D4,15 [. 187] b9 +4Htt-4-FE 4 [. 354] Ne KN el NLU = 1/4-36UNS-2B INTERFACE PER MIL-STD-348 SERIES: SMA PLUG 8 [.315] ACROSS FLATS 23,2 REF [.913] CUSTOMER OUTLINE DRAWING ALL OTHER SHEETS ARE FOR INTERNAL USE ONLY UNLESS OTHERWISE SPECIFIED, DIMENSIONS ARE IN METRIC AND TOLERANCES ARE: MATERIAL DRAWN DATE T | TLE <0. 5mm 0.5 - 6mm 6 - 30mm 30 - |20mm ANGLES M. ZHANG 15-May-18 Amoheno| RF 6 Seon 0 tent ano en : 3 P-SMP JACK TO SMA P NOTICE - These drawings, specifications, or other data (1) are, and gemain the ENGINEER DATE h Inf property of Amphenol corp. (2) must be returned upon request; and (3) are - - www. amphenolIrf.com confidential and not to be disclosed to any Person other than those 1 whom they M. ZHANG 26-Jan-16 PLUG ADAPTER P are given by Amphenol Corp. the furnishing of these drawings, specifications, or other data by Amphenol Corp., or to any other person to anyone for any purpose is REFEREE 6971 AND APPROVED DATE DRAWING NO. AD-SMAP-PSMP J- | not to be regarded by implication or otherwise in any manner licensing, granting - - : . rights to permitting such holder or any other person to manufacture, use or sell any FIGURAT . S. HSIEH 18-May-18 SCALE: 10.051 0] SHEET 2 OF 2 ITEM NO AD-SMAP-PSMPJ- | product, process or design, patented or otherwise, that may in any way be related to CONFIGURATION LEVEL: In Work CAD FILE DWG SIZE REV , or disclosed by said drawings, specifications, or other data. FINISH B A PART NO. AD-SMAP-PSMPJ- |