US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded Power Inductors
–
LPS6235
Document 587-1
Document 587-1 Revised 12/01/11
DCR SRF Isat (A)5 Irms (A)6
Inductance2 max3 typ4 10% 20% 30% 20°C 40°C
Part number1 ±20% (µH) (Ohms) (MHz) drop drop drop rise rise
LPS6235-682ML_ 6.8 0.075 55 2.6 2.7 2.8 1.30 1.90
LPS6235-822ML_ 8.2 0.095 48 2.5 2.6 2.7 1.30 1.85
LPS6235-103ML_ 10.0 0.100 37 2.3 2.4 2.5 1.28 1.80
LPS6235-123ML_ 12.0 0.110 29 1.9 2.2 2.3 1.25 1.75
LPS6235-153ML_ 15.0 0.125 25 1.9 2.0 2.0 1.22 1.70
LPS6235-183ML_ 18.0 0.140 24 1.7 1.8 1.9 1.20 1.65
LPS6235-223ML_ 22.0 0.145 24 1.6 1.7 1.7 1.10 1.60
LPS6235-333ML_ 33.0 0.180 16 1.3 1.4 1.5 1.00 1.30
LPS6235-473ML_ 47.0 0.245 13 1.1 1.2 1.2 0.80 1.15
LPS6235-563ML_ 56.0 0.280 12 1.0 1.0 1.1 0.75 1.07
LPS6235-683ML_ 68.0 0.345 10.8 0.90 0.94 0.96 0.73 1.00
LPS6235-823ML_ 82.0 0.315 10.0 0.46 0.52 0.55 0.72 0.95
LPS6235-104ML_ 100.0 0.375 9.0 0.46 0.52 0.54 0.70 0.90
LPS6235-124ML_ 120.0 0.435 8.3 0.44 0.48 0.51 0.60 0.80
LPS6235-154ML_ 150.0 0.535 7.3 0.37 0.43 0.45 0.53 0.73
LPS6235-224ML_ 220.0 0.820 5.6 0.31 0.36 0.37 0.45 0.64
LPS6235-334ML_ 330.0 1.20 4.4 0.26 0.29 0.30 0.40 0.50
LPS6235-474ML_ 470.0 1.60 3.6 0.22 0.25 0.26 0.32 0.43
LPS6235-564ML_ 560.0 2.00 3.1 0.20 0.22 0.23 0.29 0.38
LPS6235-684ML_ 680.0 2.20 2.8 0.17 0.19 0.21 0.28 0.37
LPS6235-824ML_ 820.0 2.70 2.5 0.16 0.18 0.19 0.26 0.33
LPS6235-105ML_ 1000.0 3.40 2.2 0.14 0.17 0.18 0.24 0.30
LPS6235-155ML_ 1500.0 4.60 1.9 0.12 0.13 0.14 0.19 0.26
LPS6235-185ML_ 1800.0 5.42 1.7 0.11 0.12 0.13 0.18 0.23
LPS6235-225ML_ 2200.0 6.70 1.5 0.090 0.11 0.11 0.16 0.22
LPS6235-335ML_ 3300.0 9.50 1.1 0.080 0.090 0.10 0.14 0.180
LPS6235-475ML_ 4700.0 14.5 0.94 0.070 0.077 0.084 0.11 0.150
LPS6235-565ML_ 5600.0 16.4 0.86 0.060 0.070 0.080 0.10 0.130
LPS6235-685ML_ 6800.0 21.4 0.80 0.057 0.065 0.069 0.090 0.120
LPS6235-825ML_ 8200.0 24.5 0.70 0.052 0.060 0.067 0.085 0.115
LPS6235-106ML_ 10000.0 29.5 0.61 0.050 0.055 0.060 0.075 0.095
• Low DCR; high current; shielded construction
• Perfect for backlight applications
Designer’s Kit C345 contains 3 each of all values
Core material Ferrite
Core and winding loss See www.coilcraft.com/coreloss
Terminations RoHS compliant silver-palladium-platinum-glass frit.
Other terminations available at additional cost.
Weight 460 – 480 mg
Ambient temperature –40°C to +85°C with Irms current, +85°C to
+125°C with derated current
Storage temperature Component: –40°C to +125°C.
Tape and reel packaging: –40°C to +80°C
Resistance to soldering heat Max three 40 second reflows at
+260°C, parts cooled to room temperature between cycles
Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C /
85% relative humidity)
Failures in Time (FIT) / Mean Time Between Failures (MTBF)
38 per billion hours / 26,315,789 hours, calculated per Telcordia SR-332
Packaging 350/7″reel; 1500/13″ reel Plastic tape: 16 mm wide,
0.3 mm thick, 8 mm pocket spacing, 3.68 mm pocket depth
Recommended pick and place nozzle OD: 6.2 mm; ID: ≤ 3.1 mm
PCB washing Tested with pure water or alcohol only. For other solvents,
see Doc787_PCB_Washing.pdf.
1. Please specify termination and packaging codes:
LPS6235-106MLC
Termination: L = RoHS compliant silver-palladium-
platinum-glass frit.
Special order:
T = RoHS tin-silver-copper (95.5/4/0.5)
or S = non-RoHS tin-lead (63/37).
Packaging: C = 7″ machine-ready reel. EIA-481
embossed plastic tape (350 parts
per full reel).
B = Less than full reel. In tape, but not
machine ready. To have a leader and
trailer added ($25 charge), use code
letter C instead.
D = 13″ machine-ready reel. EIA-481
embossed plastic tape. Factory
order only, not stocked (1500 parts
per full reel).
2. Inductance tested at 100 kHz, 0.1 Vrms, 0 Adc using an
Agilent/HP 4192A.
3. DCR measured on a micro-ohmmeter.
4. SRF measured using Agilent/HP 8753ES or equivalent.
5. DC current that causes the specified inductance drop
from its value without current.
6. Current that causes the specified temperature rise from
25°C ambient.
7. Electrical specifications at 25°C.
Refer to Doc 362 “Soldering Surface Mount Components”
before soldering.
US
UK
Taiwan
China
Singapore
+1-847-639-6400 sales@coilcraft.com
+44-1236-730595 sales@coilcraft-europe.com
+886-2-2264 3646 sales@coilcraft.com.tw
+86-21-6218 8074 sales@coilcraft.com.cn
+ 65-6484 8412 sales@coilcraft.com.sg
© Coilcraft Inc. 2013
This product may not be used in medical or high
risk applications without prior Coilcraft approval.
Specification subject to change without notice.
Please check web site for latest information.
Shielded SMT Power Inductors
–
LPS6235 Series
Document 587-2
0.236 ±0.003
6,00 ±0,076
0.236 ±0.003
6,00 ±0,076
0.138
3,50 max
Winding
direction
Dash
number Internal
code
XXX X
0.167
4,25
0.167
4,25
0.079
2,00
0.079
2,00
0.260
6,60
0.260
6,60
0.071
1,80
*
*
Dimensions are of the case not
including the termination. Formaximum
overall dimensions including the
termination, add 0.005 in/0,13 mm.
*
Recommended
Land Pattern
0.165
4,20
0.165
4,20
0.039
1,00 typ
typ
0.039
1,00
**
Foroptional tin-lead and tin-silver-copper
terminations,dimensions are forthe
mounted part. Dimensions before mounting
can be an additional 0.005 inch (0,13 mm).
**
inches
mm
Dimensions are in
Typical L vs Current Typical L vs Frequency
1
10
10000
1000
100
0.01 0.1
11
0
Frequency (MHz)
Inductance (µH)
3300 µH
10 µH
33 µH
1000 µH
330 µH
100 µH
1
10
10000
1000
100
0.01 0.1
11
0
Current (A)
Inductance (µH)
33 µH
330 µH
1000 µH
3300 µH
100 µH
10 µH
Typical Current Derating
-40 -20 020406080100 140120
Ambient temperature (°C)
Percent of rated current
120
110
100
90
80
70
60
50
40
30
20
10
0
Isat
Irms
25°C
Document 587-2 Revised 12/01/11
