SPECIFICATION(Reference sheet) Supplier : Samsung electro-mechanics Samsung P/N: CL05A105KP5NNNC Product : Multi-layer Ceramic Capacitor Description : CAP, 1, 10V, 10%, X5R, 0402 A. Samsung Part Number Series Size Capacitance 05 A 105 K P 5 N N N C Samsung Multi-layer Ceramic Capacitor 0402 (inch code) L: 1.0 0.05 X5R Dielectric Capacitance CL 0.5 0.05 mm W: Inner electrode Ni Termination Cu Plating Sn 100% 1 10 % tolerance mm Product Normal (Pb Free) Rated Voltage 10 V Special Reserved for future use Thickness 0.5 0.05 mm Packaging Cardboard Type, 7" reel B. Samsung Reliability Test and Judgement condition Judgement 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X5R Characteristics Adhesive Strength (From -55 to 85, Capacitance change should be within 15%) No peeling shall be occur on the 500g*F, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Judgement Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% 0.2 max With rated voltage 402, 90~95%RH, 500+12/-0hrs 12.5* or Over High Temperature Capacitance change : Resistance Tan IR : Test condition within 12.5% 0.2 max Capacitance change : Cycling Tan , IR : initial spec. of the rated voltage Max. operating temperature 1000+48/-0hrs 25* or Over Temperature With 150% within 7.5% 1 cycle condition Min. operating temperature 25 25 Max. operating temperature 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) Product specifications included in the specifications are effective as of March 1, 2013. Please be advised that they are standard product specifications for reference only. We may change, modify or discontinue the product specifications without notice at any time. So, you need to approve the product specifications before placing an order. Should you have any question regarding the product specifications, please contact our sales personnel or application engineers.