LSCRTD - LAUREL ELECTRONICS, INC.

Type 12 Free-Standing Modular Enclosure Disconnects

Detail Sheet

see universal

opening detail

panel

The dimensional information provided in this drawing is derived from information supplied by the

manufacturer of the equipment to be installed. Fit and function of all equipment should be checked

before and after installation to assure proper and safe operation and compliance with the applicable

regulations, codes and standards.

Universal opening must be filled with an operator adapter kit for the specific brand and type of

disconnect being used, (see page 381).

C9.31

(236)

9.93

(252)

3.37

(86)

4.00

(102)

2.75

(70)

3.00

(76) 1.62

(41)

1.12

(28)

.28 D

(7)

(TYP)

Flange Mounting Universal Opening Detail

this area

represents

disconnect

switch or

circuit

breaker

Important Note

When ordering modular enclosure systems, be sure to

include all the necessary components.

1. Disconnect master or slave enclosure

2. Gasket kits and/or end plates (see page 259)

3. Operator adapter plates MUST be ordered for the

specific brand and type of disconnect being used,

(see page 381)

Disconnect switch (or circuit breaker), operating handle and

operating mechanism are not furnished with enclosure, see

disconnect ordering information, pages 260 - 270.

Modular Encl.

260

Type 12 Modular Enclosures

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

* Do not install disconnects in this height enclosure.

(1) Dimension “D” does not include space for auxiliary switches.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit

and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulations, codes and standards.

Type 12 Free-Standing Modular Enclosure Disconnects

Allen-Bradley®

Allen-Bradley Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84

for Switches Amp Volt A B A B C D(1)

in. mm in. mm in. mm in. mm in. mm in. mm

DS30 30A (non) (non) -- 7.87 200 6.00 152 13.73 349 11.50 292 4.00 102 6.75 171

DS30 30A (non) (non) - 11.87 301 10.00 254 17.37 441 15.50 394 4.00 102 6.75 171

DS30 30A 30A 250V H,K,R 11.87 301 10.00 254 17.37 441 15.50 394 5.25 133 6.75 171

DS30 30A 30A 600V H,K,R 11.87 301 10.00 254 17.37 441 15.50 394 8.00 203 6.75 171

DS30 30A 30A 600V J 11.87 301 10.00 254 17.37 441 15.50 394 5.25 133 6.75 171

DS30 30A 60A 250V H,K 11.87 301 10.00 254 17.37 441 15.50 394 6.00 152 6.75 171

DS30 30A 60A 600V H,K 11.87 301 10.00 254 17.37 441 15.50 394 8.50 216 6.75 171

DS30 30A 60A 600V J 11.87 301 10.00 254 17.37 441 15.50 394 5.50 140 6.75 171

DS60 60A (non) (non) - 11.87 301 9.87 251 17.37 441 15.37 394 4.00 102 6.75 171

DS60 60A 30A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 394 8.00 203 6.75 171

DS60 60A 60A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 394 6.00 152 6.75 171

DS60 60A 60A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 394 8.50 216 6.75 171

DS60 60A 60A 600V J 11.87 301 9.87 251 17.37 441 15.37 394 5.50 140 6.75 171

DS60 60A 100A 250V H,K 11.87 301 9.87 251 17.37 441 15.37 394 8.50 216 6.75 171

DS60 60A 100A 600V H,K 11.87 301 9.87 251 17.37 441 15.37 394 10.50 267 6.75 171

DS60 60A 100A 600V J 11.87 301 9.87 251 17.37 441 15.37 394 7.25 184 6.75 171

DS100 100A (non) (non) - 11.87 301 8.37 251 17.37 441 13.87 352 4.75 121 8.00 203

DS100 100A 100A 250V H,K,R 11.87 301 8.37 251 17.37 441 13.87 352 10.50 267 8.00 203

DS100 100A 100A 600V H,K,R 11.87 301 8.37 251 17.37 441 13.87 352 12.50 318 8.00 203

DS100 100A 100A 600V J 11.87 301 8.37 251 17.37 441 13.87 352 9.25 235 8.00 203

DS100 100A 200A 250V H,K 11.87 301 8.37 251 17.37 441 13.87 352 11.25 286 8.00 203

DS100 100A 200A 600V H,K 11.87 301 8.37 251 17.37 441 13.87 352 13.75 349 8.00 203

DS100 100A 200A 600V J 11.87 301 8.37 251 17.37 441 13.87 352 10.00 254 8.00 203

DS200 200A (non) (non) - 10.43 265 6.00 102 15.93 405 11.50 292 10.00 254 11.00 279

DS200 200A 200A 250V H,K,R 10.43 265 6.00 102 15.93 405 11.50 292 15.00 381 11.00 279

DS200 200A 200A 600V H,K,R 10.43 265 6.00 102 15.93 405 11.50 292 17.25 438 11.00 279

DS200 200A 200A 600V J 10.43 265 6.00 102 15.93 405 11.50 292 13.50 343 11.00 279

DS200 200A 400A 250V H,K 10.43 265 6.00 102 15.93 405 11.50 292 15.75 400 11.00 279

DS200 200A 400A 600V H,K 10.43 265 6.00 102 15.93 405 11.50 292 18.75 476 11.00 279

DS200 200A 400A 600V J 10.43 265 6.00 102 15.93 405 11.50 292 14.25 362 11.00 279

DS400 400A (non) (non) - * * * * 15.93 405 9.62 244 10.75 273 11.00 279

DS400 400A 400A 250V H,K,R * * * * 15.93 405 9.62 244 16.25 413 11.00 279

DS400 400A 400A 600V H,K,R * * * * 15.93 405 9.62 244 19.25 489 11.00 279

DS400 400A 400A 600V J * * * * 15.93 405 9.62 244 14.75 375 11.00 279

Allen-Bradley Circuit Breaker Type Enclosure Height

Mechanism for Amp 72 84

Circuit Breakers Manufacturer Frame(s) A B A B C D(1)

in. mm in. mm in. mm in. mm in. mm in. mm

M40 150A General Electric TED, THED, TEC 11.87 301 11.25 286 17.37 441 16.75 425 5.75 146 4.75 121

M40 150A Westinghouse F (series C) 11.87 301 11.25 286 17.37 441 16.75 425 5.00 127 4.75 121

M50 250A Westinghouse J (series C) 11.87 301 10.87 276 17.37 441 16.37 416 9.75 248 5.00 127

M60 400A Westinghouse K (series C) 11.87 301 10.62 270 17.37 441 16.12 409 9.75 248 6.25 159

1949V Disconnect Mechanism

Modular Encl.

Type 12 Modular Enclosures

261

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches. Millimeters shown are for reference only.

Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

Allen-Bradley ®

(1) Dimension “D” does not include space for auxiliary switches. The dimensional information provided in this table is derived from informa-

tion supplied by the manufacturer of the equipment to be installed. Fit and

function of all equipment should be checked before and after installation to

assure proper and safe operation and compliance with the applicable regula-

tions, codes and standards.

1494V Disconnect Mechanism

Allen-Bradley Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84

for Switches Amp Volt A B A B C D(1)

in. mm in. mm in. mm in. mm in. mm in. mm

N30 30A (NON) (NON) - 9.87 251 9.37 238 15.37 390 14.87 378 4.75 121 6.50 165

NF30 30A 30A 250V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 6.50 165 6.50 165

NF30 30A 30A 600V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 9.25 235 6.50 165

NF30 30A 30A 600V J 9.87 251 9.37 238 15.37 390 14.87 378 6.50 165 6.50 165

NF30 30A 60A 250V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 7.25 184 6.50 165

NF30 30A 60A 600V H,K,R 9.87 251 9.37 238 15.37 390 14.87 378 9.75 248 6.50 165

NF30 30A 60A 600V J 9.87 251 9.37 238 15.37 390 14.87 378 6.75 171 6.50 165

N60 60A (NON) (NON) - 9.87 251 8.62 238 15.37 390 14.12 378 4.75 121 6.50 165

NF60 60A 30A 600V H,K,R 9.87 251 8.62 238 15.37 390 14.12 378 10.50 267 6.50 165

NF60 60A 60A 250V H,K,R 9.87 251 8.62 238 15.37 390 14.12 378 8.50 216 6.50 165

NF60 60A 60A 600V H,K,R 9.87 251 8.62 219 15.37 390 14.12 378 11.00 279 6.50 165

NF60 60A 60A 600V J 9.87 251 8.62 219 15.37 390 14.12 378 7.75 197 6.50 165

NF60 60A 100A 250V H,K,R 9.87 251 8.62 219 15.37 390 14.12 378 11.00 279 6.50 165

NF60 60A 100A 600V H,K,R 9.87 251 8.62 219 15.37 390 14.12 378 13.00 330 6.50 165

NF60 60A 100A 600V J 9.87 251 8.62 219 15.37 390 14.12 378 9.75 248 6.50 165

N100 100A (NON) (NON) - 9.87 251 6.75 171 15.37 390 12.25 311 4.75 121 7.25 184

NF100 100A 100A 250V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 11.50 292 7.50 191

NF100 100A 100A 600V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 13.50 343 7.50 191

NF100 100A 100A 600V J 9.87 251 6.75 171 15.37 390 12.25 311 10.25 260 7.50 191

NF100 100A 200A 250V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 12.25 311 7.75 197

NF100 100A 200A 600V H,K,R 9.87 251 6.75 171 15.37 390 12.25 311 14.75 375 7.75 197

NF100 100A 200A 600V J 9.87 251 6.75 171 15.37 390 12.25 311 11.00 279 7.75 197

N200 200A (NON) (NON) - 8.56 217 5.12 130 14.06 357 10.62 270 7.25 184 10.50 267

NF200 200A 200A 250V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 15.00 381 10.50 267

NF200 200A 200A 600V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 17.50 445 10.50 267

NF200 200A 200A 600V J 8.56 217 5.12 130 14.06 357 10.62 270 13.75 349 10.50 267

NF200 200A 400A 250V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 16.50 419 11.00 279

NF200 200A 400A 600V H,K,R 8.56 217 5.12 130 14.06 357 10.62 270 19.50 495 11.00 279

NF200 200A 400A 600V J 8.56 217 5.12 130 14.06 357 10.62 270 15.00 381 11.00 279

1494D Disconnect Mechanism

Allen-Bradley Circuit Breaker Type Enclosure Height

Mechanism for Amp 72 84

Circuit Breakers Manufacturer Frame(s) A B A B C D(1)

in. mm in. mm in. mm in. mm in. mm in. mm

N4/N40 150A General Electric TED, THED, TEC 9.87 251 9.25 235 15.37 390 14.75 375 5.87 149 4.62 117

N5/N55 225A General Electric TFK, THFK, TFC 9.87 251 8.50 216 15.37 390 14.00 356 8.87 225 4.75 121

N4/N40 150A Westinghouse F (series C) 9.87 251 9.25 235 15.37 390 14.75 375 5.87 149 4.62 117

N5/N50 250A Westinghouse J (series C) 9.87 251 8.50 216 15.37 390 14.00 356 8.87 225 4.75 121

Modular Encl.

262

Type 12 Modular Enclosures

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

Culter-Hammer®

* Do not install disconnects in this height enclosure.

(1) Wire bending space “B” does not allow the use of cable larger than 300 MCM in 72H enclosures.

(2) Wire bending space “B” does not allow the use of cable larger than 250 MCM in 72H enclosures.

(3) Wire bending space “B” does not allow the use of cable larger than 300 MCM in 84H enclosures.

(4) Wire bending space “B” does not allow the use of Westinghouse terminals TA1201NB1 in 84H enclosures.

C361 Disconnect Mechanism

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit

and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulations, codes and standards.

Cutler-Hammer Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84

for Switches Amp Volt A B A B C D

in. mm in. mm in. mm in. mm in. mm in. mm

NC 30A (non) (non) - 11.87 301 10.50 267 17.37 441 16.00 406 4.75 121 6.25 159

SC21 30A 30A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 7.75 197 6.25 159

SC61 30A 30A 600V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 7.75 197 6.25 159

SC61 30A 60A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 8.25 210 6.25 159

ND 60A (non) (non) - 11.87 301 10.50 267 17.37 441 16.00 406 4.75 121 6.25 159

SD22 60A 30A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 7.75 197 6.25 159

SD22 60A 60A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 8.25 210 6.25 159

SD62 60A 60A 600V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 8.25 210 6.25 159

SD62 60A 60A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 8.00 203 6.25 159

NE 100A (non) (non) - 11.87 301 10.12 257 17.37 441 15.62 397 4.25 108 7.50 191

SE263 100A 100A 250V H,K,R 11.87 301 10.12 257 17.37 441 15.62 397 9.00 229 7.50 191

SE263 100A 100A 600V H,K,R 11.87 301 10.12 257 17.37 441 15.62 397 9.00 229 7.50 191

SE263 100A 100A 600V J 11.87 301 10.12 257 17.37 441 15.62 397 7.75 197 7.50 191

NF 200A (non) (non) - 11.87 301 8.12 206 17.37 441 13.62 346 13.25 337 10.25 260

SF264 200A 200A 250V H,K,R 11.87 301 8.12 206 17.37 441 13.62 346 13.25 337 10.25 260

SF264 200A 200A 600V H,K,R 11.87 301 8.12 206 17.37 441 13.62 346 13.25 337 10.25 260

C371 Disconnect Mechanism

Cutler-Hammer Circuit Breaker Type Enclosure Height

Mechanism for Amp 72 84

Circuit Breakers Manufacturer Frame(s) A B A B C D

in. mm in. mm in. mm in. mm in. mm in. mm

C371E 150A Cutler-Hammer HMCP,FS,FH 11.87 301 11.62 295 17.37 441 17.12 435 6.00 152 5.75 146

C371F (1) 225A Cutler-Hammer HMCP,JS,JH,JL 11.87 301 11.50 292 17.37 441 17.00 432 11.00 279 8.25 210

C371F (1) 400A Cutler-Hammer HMCP,KS,KH 11.87 301 11.00 279 17.37 441 16.50 419 9.75 248 8.25 210

C371G (2) 600A Cutler-Hammer LS,LH 11.87 301 9.37 238 17.37 441 14.87 378 8.50 216 12.00 305

C371K (3) 800A Cutler-Hammer MS,MH * * * * 17.37 441 11.37 289 10.25 260 12.00 305

C371K (3) 1200A Cutler-Hammer NS,NH * * * * 17.37 441 11.37 289 10.25 260 12.00 305

C371E 150A Westinghouse F(series C) 11.87 301 11.62 295 17.37 441 17.12 435 6.00 152 5.75 146

C371F (1) 250A Westinghouse J(series C) 11.87 301 11.50 292 17.37 441 17.00 432 9.00 229 8.25 210

C371F (1) 400A Westinghouse K(series C) 11.87 301 11.00 279 17.37 441 16.50 419 9.75 248 8.25 210

C371G (2) 600A Westinghouse LA,LC 11.87 301 9.37 238 17.37 441 14.87 378 8.50 216 12.00 305

C371K (3) 800A Westinghouse MC * * * * 17.37 441 11.37 289 10.25 260 12.00 305

C371K (3)(4) 1200A Westinghouse NC * * * * 17.37 441 11.37 289 10.25 260 12.00 305

Modular Encl.

Type 12 Modular Enclosures

263

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches. Millimeters shown are for reference only.

Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

General Electric®

TDA Disconnect Mechanism

* Do not install disconnects in this height enclosure.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit

and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulations, codes and standards.

General Electric Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84

for Switches Amp Volt A B A B C D

in. mm in. mm in. mm in. mm in. mm in. mm

TDOM1A 30A (non) (non) - 11.87 301 12.37 314 17.37 441 17.87 454 7.00 178 5.50 140

TDOM1A 30A 30A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 7.00 178 5.50 140

TDOM1B 30A 30A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 30A 60A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 30A 60A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1A 60A (non) (non) - 11.87 301 12.37 314 17.37 441 17.87 454 7.00 178 5.50 140

TDOM1B 60A 60A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 60A 60A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 60A 100A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 60A 100A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1A 100A (non) (non) - 11.87 301 12.37 314 17.37 441 17.87 454 7.00 178 5.5 140

TDOM1B 100A 100A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 100A 100A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 100A 200A 250V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM1B 100A 200A 600V H,R 11.87 301 12.37 314 17.37 441 17.87 454 11.50 292 5.50 140

TDOM2 200A (non) (non) - 11.87 301 9.75 248 17.37 441 15.25 387 7.00 178 9.25 235

TDOM2 200A 200A 250V H,R 11.87 301 9.75 248 17.37 441 15.25 387 15.50 394 9.25 235

TDOM2 200A 200A 600V H,R 11.87 301 9.75 248 17.37 441 15.25 387 15.50 394 9.25 235

General Electric Enclosure Height

Mechanism for Amp Circuit Breaker Type 72 84

Circuit Breakers ABA B CD

in. mm in. mm in. mm in. mm in. mm in. mm

TDOM1A 150A TEB, TEC, TED, THED 11.87 301 11.25 286 17.37 441 16.75 425 7.00 178 5.50 140

TDOM1B 150A TB1, TEC, TECL 11.87 301 11.25 286 17.37 441 16.75 425 11.50 292 5.50 140

TDOM1C 150A TEL 11.87 301 11.25 286 17.37 441 16.75 425 7.00 178 5.50 140

TDOM1D 150A THCL1 11.87 301 9.87 251 17.37 441 15.37 390 7.00 178 5.50 140

TDOM3 225A TFJ, TFK, THFK, TFL 11.87 301 10.87 276 17.37 441 16.37 416 10.50 267 6.00 152

TDOM4 400A TJJ, TJK4, THJK4, TJL4V 11.87 301 10.00 254 17.37 441 15.50 394 8.25 210 9.50 241

TDOM4 600A TJK6, THJK6, TJ4V, TJL4V 11.87 301 10.00 254 17.37 441 15.50 394 8.25 210 9.50 241

TDOM5 400A TB4, TJH6S 11.87 301 10.00 254 17.37 441 15.50 394 14.25 362 9.50 241

TDOM6 225A TLB2, THLC2 * * * * 17.37 441 14.87 378 11.75 298 9.50 241

TDOM6 400A TLB4, THLC4 * * * * 17.37 441 13.50 343 11.75 298 9.50 241

TDOM7 600A TB6 * * * * 17.37 441 11.75 298 18.25 464 9.50 241

TDOM7 800A TB8 * * * * 17.37 441 11.75 298 18.25 464 9.50 241

Modular Encl.

264

Type 12 Modular Enclosures

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

I-T-E Siemens®

Disconnect Cable Circuit Breaker Type

Mechanism Length

FHOE036 36 ED2 ,ED4, ED6, HED4, HED6, ED6ETI

FHOE036 36 CED6, CED6ETI

FHOF036 36 FD6, FXD6, HFD6, FXD6ETI

FHOF036 36 CFD6, CFD6ETI

FHOJ036 36 JD2, JD6, JXD6, HJD6, JXD6ETI, LD6, LXD6, HLD6, LXD6ETI, SHJD6, SLD6, SHLD6

FHOJ036 36 CJD6, CJD6ETI, CLD6, CLD6ETI, SCJD6, SCLD6

FHON048 48 MD6, HMD6, CMD6, MXD6ETI, CMD6ETI, SMD6, SHMD6, SCMD6, ND6, HND6, CND6, SND6, SCND6

* Non-standard mechanism with 48 inch operating cable must be specified.

(1) Flexible operating cable allows disconnect to be mounted within minimum and maximum of “C” dimension when “D” is minimum.

(2) Flexible operating cable allows disconnect to be mounted within minimum and maximum of “D” dimension when “C” is nominal.

I-T-E Siemens Circuit

Enclosure Height

Enclosure Cable Mechanism Breaker Amp Device ACD

Circuit Breakers Frame Height 72 84 nom min max min max

in. mm in. mm in. mm in. mm in. mm in. mm in. mm in. mm

36 FHOE036 ED 125A 6.37 162 11.87 301 17.37 441 5.37 136 -2.75 -70 13.50 343 3.00 76 9.75 248

36 FHOE036 CED 125A 9.62 244 11.87 301 17.37 441 8.50 216 .06 15 16.87 428 3.00 76 9.75 248

18 36 FHOF036 FD 250A 9.50 241 11.87 301 17.37 441 5.62 143 2.43 62 13.87 352 4.50 114 8.50 216

36 FHOF036 CFD 250A 14.12 359 11.87 301 17.37 441 10.25 260 7.25 184 18.62 473 4.50 114 8.50 216

36 FHOJ036 JD,LD 400A,600A 11.00 279 11.87 301 17.37 441 5.25 133 -2.87 -73 13.43 341 7.50 191 10.12 257

36 FHOJ036 CJD 400A,600A 17.87 454 11.87 301 17.37 441 12.12 308 4.12 105 20.37 517 7.50 114 10.12 257

48 * ED 125A 6.37 162 11.87 301 17.37 441 5.37 136 -15.37 -390 26.25 667 3.00 76 24.43 621

48 * CED 125A 9.62 244 11.87 301 17.37 441 8.50 216 -12.00 -305 26.50 673 4.50 114 24.43 621

48 * FD 250A 9.50 241 11.87 301 17.37 441 5.62 143 -12.15 -309 26.50 673 4.50 114 23.00 584

18 48 * CFD 250A 14.12 359 11.87 301 17.37 441 10.25 260 -10.25 -260 30.37 771 4.50 114 23.00 584

48 * JD,LD 400A,600A 11.00 279 11.87 301 17.37 441 5.25 133 -15.43 -392 26.12 663 7.50 191 24.50 622

48 * CJD 400A,600A 17.87 454 11.87 301 17.37 441 12.12 308 -8.50 -216 33.00 838 7.50 191 24.50 622

48 FHON048 MD,ND 800A,1200A 16.00 406 11.87 301 17.37 441 8.12 206 -5.12 -130 21.43 544 9.00 229 20.50 521

48 * ED 125A 6.37 162 11.87 301 17.37 441 5.37 136 -13.37 -340 23.25 591 3.00 76 20.62 524

48 * CED 125A 9.62 244 11.87 301 17.37 441 8.50 216 -10.00 -254 26.50 673 3.00 76 20.62 254

48 * FD 250A 9.50 241 11.87 301 17.37 441 5.62 143 -13.00 -330 23.50 597 4.50 114 19.37 492

24 48 * CFD 250A 14.12 359 11.87 301 17.37 441 10.25 260 -8.25 -210 28.37 721 4.50 114 19.37 492

48 * JD,LD 400A,600A 11.00 279 11.87 301 17.37 441 5.25 133 -13.43 -343 23.12 587 7.50 191 20.93 532

48 * CJD 400A,600A 17.87 454 11.87 301 17.37 441 12.12 308 -6.50 -165 30.00 762 7.50 191 20.93 532

48 FHON048 MD,ND 800A,1200A 16.00 406 11.87 301 17.37 441 8.12 206 -3.12 -79 19.93 506 9.00 229 20.50 521

MAX-FLEX Disconnects

MAX-FLEX Disconnect Mechanism

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed.

Fit and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the

applicable regulations, codes and standards.

Modular Encl.

Type 12 Modular Enclosures

265

Notes: Refer to detail sheet for drawing information and associated dimensions. Flexible cable allows for variable disconnect mounting and adequate

wire bending space must be maintained Dimensions are in inches. Millimeters shown are for reference only. Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

Square D®

* Do not install disconnects in this height enclosure.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit and

function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulation, codes and standards.

9422 Disconnect Mechanism

Square D Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Class 72 84

for Switches Amp Volt A B A B C D

in. mm in. mm in. mm in. mm in. mm in. mm

RC-1 30A (non) (non) - 11.87 301 11.75 298 17.37 441 17.18 436 3.25 83 7.25 1842

RC-2 30A 30A 250V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 5.00 127 7.25 1842

RC-3 30A 30A 600V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 8.00 203 7.25 1842

RC-3 30A 30A 600V J 11.87 301 11.75 298 17.37 441 17.18 436 5.00 127 7.25 1842

RC-3 30A 60A 250V H,K,R 11.87 301 11.75 298 17.37 441 17.18 436 6.00 152 7.25 1842

TC-1 30A (non) (non) - 11.87 301 9.87 251 17.37 441 15.37 390 5.75 146 6.25 159

TC-2 30A 30A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 5.75 146 6.25 159

TC-3 30A 30A 600V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 7.75 197 6.25 159

TC-3 30A 30A 600V J 11.87 301 9.87 251 17.37 441 15.37 390 5.75 146 6.25 159

TC-3 30A 60A 250V H,K,R 11.87 301 9.87 251 17.37 441 15.37 390 6.00 152 6.25 159

TD-1 60A (non) (non) - 11.87 301 10.75 273 17.37 441 16.25 413 6.50 165 6.75 171

TD-2 60A 30A 600V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 8.50 216 6.75 171

TD-2 60A 60A 250V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 6.50 165 6.75 171

TD-3 60A 60A 600V H,K,R 11.87 301 10.75 273 17.37 441 16.25 413 9.00 229 6.75 171

TD-3 60A 60A 600V J 11.87 301 10.75 273 17.37 441 16.25 413 6.50 165 6.75 171

TE-1 100A (non) (non) - 11.87 301 10.50 267 17.37 441 16.00 406 4.75 257 8.50 216

TE-2 100A 100A 250V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 7.50 191 8.50 216

TE-2 100A 100A 600V H,K,R 11.87 301 10.50 267 17.37 441 16.00 406 9.50 241 8.50 216

TE-2 100A 100A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 6.25 159 8.50 216

TE-3 100A 200A 600V J 11.87 301 10.50 267 17.37 441 16.00 406 13.75 349 8.50 216

TF-1 200A (non) (non) - 11.87 301 9.12 232 17.37 441 14.62 371 5.50 140 11.75 298

TF-2 200A 200A 250V H,K,R 11.87 301 9.12 232 17.37 441 14.62 371 11.50 62 11.75 298

TF-2 200A 200A 600V H,K,R 11.87 301 9.12 232 17.37 441 14.62 371 14.00 356 11.75 298

TF-2 200A 200A 600V J 11.87 301 9.12 232 17.37 441 14.62 371 10.25 260 11.75 298

TF-3 200A 400A 600V J 11.87 301 9.12 232 17.37 441 14.62 371 14.50 368 11.75 298

Square D Enclosure Height

Mechanism for Amp Circuit Breaker Type 72 84

Circuit Breakers ABA B CD

in. mm in. mm in. mm in. mm in. mm in. mm

RN-1 100A FAL, FHL, FCL 7.87 200 6.87 174 17.37 441 16.37 416 5.25 133 5.50 140

RP-1 250A KAL, KHL, KCL 7.87 200 6.62 168 17.37 441 17.12 435 7.25 184 5.75 146

RR-1 400A LAL, LHL, Q4L * * * * 17.37 441 12.75 324 7.75 197 9.00 229

RR-2 400A ILL * * * * 17.37 441 17.12 435 11.00 279 15.75 400

RT-1 800A MEL * * * * 17.37 441 12.62 321 9.25 235 12.00 305

RT-1 1000A MAL, MHL * * * * 17.37 441 12.62 321 9.25 235 12.00 305

Modular Encl.

266

Type 12 Modular Enclosures

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

Westinghouse®

* Do not install disconnects in this height enclosure.

(1) Dimensions “C” and “D” on these disconnects do not include space for fuse blocks which are mounted separately.

AMT Disconnect Mechanism

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit

and function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulation, codes and standards.

Westinghouse Fuse Clip Rating Fuse Enclosure Height Pivot Width

Mechanism Amp Class 60 72 C D

for Switches Amp Volt ABAB variable fixed

in. mm in. mm in. mm in. mm in. mm in. mm in mm

DS16U 30A (non) (non) - 13.12 333 13.25 337 18.62 473 18.75 476 5.25 133 9.00 229 7.00 178

DS121R 30A 30A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 10.25 260 9.00 229 7.00 178

DS161U 30A 30A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 12.25 311 9.00 229 7.00 178

DS122 30A 60A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 10.25 260 9.00 229 7.00 178

DS162 30A 60A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 12.25 311 9.00 229 7.00 178

DS26U 60A (non) (non) - 13.12 333 13.25 337 18.62 473 18.75 476 5.25 133 9.00 229 7.00 178

DS222R 60A 60A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 10.25 260 9.00 229 7.00 178

DS262R 60A 60A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 12.25 311 9.00 229 7.00 178

DS263 60A 100A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 10.25 260 9.00 229 7.00 178

DS263 60A 100A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 12.25 311 9.00 229 7.00 178

DS36U 100A (non) (non) - 13.12 333 13.25 337 18.62 473 18.75 476 5.25 133 9.00 229 7.00 178

DS363R 100A 100A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 10.25 260 9.00 229 7.00 178

DS363R 100A 100A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 12.25 311 9.00 229 7.00 178

DS364 (1) 100A 200A 250V H,R 13.12 333 13.25 337 18.62 473 18.75 476 5.25 133 9.00 229 7.00 178

DS364 (1) 100A 200A 600V H,J,R 13.12 333 13.25 337 18.62 473 18.75 476 5.25 133 9.00 229 7.00 178

DS46U 200A (non) (non) - 13.12 333 11.00 279 18.62 473 16.50 419 6.00 152 12.00 305 10.00 254

DS464R 200A 200A 250V H,R 13.12 333 11.00 279 18.62 473 16.50 419 14.00 356 12.00 305 10.00 254

DS464R 200A 200A 600V H,R 13.12 333 11.00 279 18.62 473 16.50 419 15.25 387 12.00 35 10.00 254

DS464R 200A 200A 600V J 13.12 333 11.00 279 18.62 473 16.50 419 14.00 356 12.00 305 10.00 254

DS465 (1) 200A 400A 250V H,J,R 13.12 333 11.00 279 18.62 473 16.50 419 6.00 152 12.00 305 10.00 254

DS465 (1) 200A 400A 600V H,J,R 13.12 333 11.00 279 18.62 473 16.50 419 6.00 152 12.00 305 10.00 254

Westinghouse Enclosure Height Pivot Width

Mechanism for Amp Circuit Breaker Type 72 84 C D

Circuit Breakers ABAB variable fixed

in. mm in. mm in. mm in. mm in. mm in. mm in mm

EB 100A EB 13.12 333 12.37 314 18.62 473 17.87 454 5.50 140 9.25 235 7.25 184

FB Tri-Pac 100A FB Tri-Pac 13.12 333 12.37 314 18.62 473 17.87 454 8.25 210 9.25 235 7.25 184

MCP 150A MCP (0-4) current limiting 13.12 333 12.37 314 18.62 473 17.87 454 8.25 210 9.25 235 7.25 184

F Frame 150A F (series C) 13.12 333 12.37 314 18.62 473 17.87 454 5.50 140 9.25 235 7.25 184

J Frame 250A J (series C) 13.12 333 9.50 241 18.62 473 15.00 381 6.75 36 9.25 235 - -

K Frame 400A K (series C) 13.12 333 9.00 229 18.62 473 14.50 368 8.25 210 9.25 235 - -

LA Tri-Pac 400A LA Tri-Pac * * * * 18.62 473 16.50 419 14.25 362 12.00 305 - -

LA, LC 600A LA, LAB, HLA, LC, HLC 13.12 333 11.00 279 18.62 473 16.50 419 9.00 229 12.00 305 - -

MC 800A MC, HMC * * * * 18.62 473 12.87 327 10.50 267 12.00 305 - -

NB Tri-Pac 800A NB Tri-Pac * * * * 18.62 473 12.87 327 10.50 267 12.00 305 - -

NB, NC 1200A NB, HNB, NC, HNC * * * * 18.62 473 12.87 327 10.50 267 12.00 305 - -

Modular Encl.

Type 12 Modular Enclosures

267

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches. Millimeters shown are for reference only.

Data subject to change without notice.

Type 12 Free-Standing Modular Enclosure Disconnects

Westinghouse

* Do not install disconnects in this height enclosure.

(1) Dimensions "C" and "D" on these disconnects do not include space for fuse blocks which are mounted separately.

The dimensional information provided in this table is derived from information supplied by the manufacturer of the equipment to be installed. Fit and

function of all equipment should be checked before and after installation to assure proper and safe operation and compliance with the applicable

regulation, codes and standards.

SM Disconnect Mechanism

Westinghouse Fuse Clip Rating Fuse Enclosure Height

Mechanism Amp Switch Type Class 72 84

for Switches ABABCD

in. mm in. mm in. mm in. mm in. mm in. mm

SM100R 30A De-ion Switch - 11.31 287 11.25 286 16.81 427 16.75 425 6.62 168 4.75 121

SM100R 60A De-ion Switch - 11.31 287 11.25 286 16.81 427 16.75 425 6.62 168 4.75 121

SM100R 100A De-ion Switch - 11.31 287 9.75 248 16.81 427 15.25 387 6.62 168 5.25 121

SM100SFR 30A DS121R H,R 11.31 287 11.50 292 16.81 427 17.00 432 7.00 178 5.50 140

SM100SFR 30A DS122 H,R 11.31 287 11.50 292 16.81 427 17.00 432 7.87 200 5.50 140

SM100SFR 60A DS222R H,R 11.31 287 11.50 292 16.81 427 17.00 432 7.87 200 5.50 140

SM100SFR 30A DS161R H,R 11.31 287 11.50 292 16.81 427 17.00 432 10.00 254 5.50 140

SM100SFR 30A DS161R J 11.31 287 11.50 292 16.81 427 17.00 432 7.25 184 5.50 140

SM100SFR 60A DS262H J 11.31 287 11.50 292 16.81 427 17.00 432 7.25 184 5.50 140

SM100SFR 30A DS162 H,R 11.31 287 11.50 292 16.81 427 17.00 432 10.37 263 5.50 140

SM100SFR 60A DS262R H,R 11.31 287 11.50 292 16.81 427 17.00 432 10.37 263 5.50 140

SM100SFR 100A DS363R(250V) H,R 11.31 287 11.50 292 16.81 427 17.00 432 10.25 260 5.50 140

SM100SFR 100A DS363R(600V) H,R 11.31 287 11.50 292 16.81 427 17.00 432 12.12 308 5.50 140

SM100SFR 60A DS263(600V) H,R 11.31 287 11.50 292 16.81 427 17.00 432 12.12 308 5.50 140

SM100SFR 100A DS363R J 11.31 287 11.50 292 16.81 427 17.00 432 8.87 225 5.50 140

SM150R 30A DS16U Switch - 11.31 287 11.50 292 16.81 427 17.00 432 5.12 130 5.50 140

SM150R 60A DS26U Switch - 11.31 287 11.50 292 16.81 427 17.00 432 5.12 130 5.50 140

SM150R (1) 100A DS36U Switch - 11.31 287 11.50 292 16.81 427 17.00 432 5.12 130 5.50 140

SM150R (1) 100A DS364 H,R 11.31 287 11.50 292 16.81 427 17.00 432 5.12 130 5.50 140

SM200SR (1) 200A DS46U Switch - 10.87 276 9.00 229 16.37 416 14.50 368 7.37 187 6.75 171

SM200SR (1) 200A DS465 Switch H,R 10.87 276 9.00 229 16.37 416 14.50 368 7.37 187 6.75 171

SM200SFR 200A DS464R H,R 10.87 276 9.00 229 16.37 416 14.50 368 15.25 387 6.75 171

Westinghouse Enclosure Height

Mechanism for Amp Circuit Breaker Type 72 84

Circuit Breakers ABA B CD

in. mm in. mm in. mm in. mm in. mm in. mm

SM150R 100A EB 11.31 287 10.50 267 16.81 427 16.00 406 5.12 130 5.50 140

SM101PR 100A FB Tri-Pac 11.31 287 10.50 267 16.81 427 16.00 406 8.00 203 5.50 140

SM101PR 150A MCP (0-4) current limiting 11.31 287 10.50 267 16.81 427 16.00 406 8.00 203 5.50 140

SM150R 150A F (series C) 11.31 287 10.50 267 16.81 427 16.00 406 8.00 203 5.50 140

SM250JR 250A J (series C) 10.87 276 8.00 203 16.37 416 13.50 343 8.50 216 7.50 191

SM400KR 400A K (series C) 10.87 276 7.62 194 16.37 416 13.12 333 9.12 232 7.50 191

SM400PR 400A LA Tri-Pac 10.87 276 7.75 197 16.37 416 13.25 337 14.50 368 9.75 248

SM400R 600A LA, LAB, HLA, LC, HLC 10.87 276 7.75 197 16.37 416 13.25 337 9.25 50 9.75 248

SM800R 800A MC, HMCL * * * * 16.37 416 9.62 244 10.75 581 9.75 248

SM400PR 800A NB, Tri-Pac * * * * 16.37 416 9.62 244 16.87 428 9.75 248

SM1200R 1200A NB, HNB, NC, HNC * * * * 16.37 416 9.62 244 10.75 581 9.75 248

Modular Encl.

268

Type 12 Modular Enclosures

Notes: Refer to detail sheet for drawing information and associated dimensions. Dimensions are in inches.

Millimeters shown are for reference only. Data subject to change without notice.

General Electric

Standard enclosures designed to accept variable depth

type TDA.

General Electric TDA disconnect switch:

1. Disconnect switch, (QMR, QMW)

2. Operating mechanism

3. Operating handle TDA1

4 Fuse clip kit or no-fuse kit, (if required)

5. Line and load connectors, (if necessary)

6. Extended length drive rod, (if required)

NOTE: These items can be ordered as an assembly.

General Electric TDA circuit breaker:

1. Circuit breaker

2. Operating mechanism

3. Operating handle TDA1

4. Line and load connectors, (if necessary)

5. Extended length drive rod, (if required)

I-T-E Siemens

Standard enclosures designed to accept MAX-FLEX

type FHO.

I-T-E MAX-FLEX circuit breaker:

1. Circuit breaker

2. Operating mechanism

3. Operating handle

4. Line and load connectors, (if necessary)

5. Operating cable

NOTE: Items 2,3 and 5 can be ordered as an assembly,

standard with a 36 inch long operating cable. All 24 inch

deep enclosures require a 48 inch long cable.

Square D

Standard enclosures designed to accept variable depth

type 9422.

Square D 9422 disconnect switch:

1. Disconnect switch

2. Operating mechanism

3. Operating handle

4. Fuse clip kit, (if required)

5. Line and load connectors, (if necessary)

6. Connecting rod

Square D 9422 circuit breaker:

1. Circuit breaker

2. Operating mechanism

3. Operating handle

4. Line and load connectors, (if necessary)

5. Connecting rod

Type 12 Free-Standing Modular Enclosure Disconnects

Disconnect Ordering Information

Allen-Bradley

Standard enclosures designed to accept variable depth

type 1494V.

Allen-Bradley 1494V disconnect switch:

1. Disconnect switch

2. Operating mechanism

3. Operating handle

4. Fuse block kit, (if required)

5. Fuse clip kit, (if required)

6. Line and load connectors, (if necessary)

7. Connecting rod

Allen-Bradley 1494V circuit breaker:

1. Circuit breaker (General Electric, Westinghouse)

2. Operating mechanism

3. Operating handle

4. Line and load connectors, (if necessary)

5. Connecting rod

Standard enclosures designed to accept fixed depth type

1494F or 1494D.

Allen-Bradley 1494F disconnect switch:

1. Disconnect switch

2. Operating mechanism

3. Operating handle

4. Fuse block kit, (if required)

5. Fuse clip kit, (if required)

6. Line and load connectors, (if necessary)

Allen-Bradley 1494D circuit breaker:

1. Circuit breaker (General Electric, Westinghouse)

2. Operating mechanism

3. Operating handle

4. Line and load connectors, (if necessary)

5. Slide mechanism

Cutler-Hammer

Standard enclosures designed to accept variable depth

type C361 or C371.

Cutler-Hammer C361 disconnect switch:

1. Disconnect switch

2. Operating mechanism

3. Operating handle

4. Fuse clip kit (if required)

5. Line and load connectors (if necessary)

NOTE: Items 1,2 and 3 can be ordered as an assembly.

Cutler-Hammer C371 circuit breaker:

1. Circuit breaker (Cutler-Hammer, Westinghouse)

2. Operating mechanism

3. Operating handle

4. Line and load connectors (if necessary)

NOTE: Items 2 and 3 can be ordered as an assembly.

Modular Encl.

Type 12 Modular Enclosures

269

Type 12 Free-Standing Modular Enclosure Disconnects

Disconnect Ordering Information

Westinghouse

Standard enclosures designed to accept below handle

type AMT.

Westinghouse AMT disconnect switch:

1. Disconnect switch

2. Pivot mechanism assembly for below handle mounting

3. Backplate and yoke assembly for below handle

mounting

4. Operating handle

5. Fuse block kit, (if required)

6. Fuse clip kit (if required)

7. Line and load connectors, (if necessary)

8. Connecting rod

Westinghouse AMT circuit breaker:

1. Circuit breaker

2. Pivot mechanism assembly for below handle mounting

3. Backplate and yoke assembly for below handle

mounting

4. Operating handle

5. Line and load connectors, (if necessary)

6. Fuse clip kit, (if required)

7. Connecting rod

Standard enclosures designed to accept fixed depth

type SM.

Westinghouse SM disconnect switch:

1. Disconnect switch

2. Operating mechanism

3. Operating handle

4. Fuse block kit, (if required)

5. Fuse clip kit, (if required)

6. Line and load connectors, (if necessary)

Westinghouse SM circuit breaker:

1. Circuit breaker

2. Operating mechanism

3. Operating handle

4. Line and load connectors, (if necessary)

Important Note

When ordering modular flange-mounted disconnect

equipment, be sure to include all necessary

components listed below.

1. Enclosure includes the following equipment:

Enclosure door locking handle and rods

Door interlocking system

Interlocking connecting rod

Adjustable bracket, (see note 4)

2. Operator adapter plate, gasket and hardware for the type

of disconnect device being used MUST be ordered

separately (see page 381)

3. Modular gasket kits and/or end plates (see page 259)

4. 24 inch deep enclosures include an adjustable bracket for

mounting some disconnects:

Cutler-Hammer C361 device

Cutler-Hammer C371 E and F devices unless long

connecting rod C371CS1 is specified

Cutler-Hammer C371 G and K devices unless long

connecting rod C371CS2 is specified

General Electric TDA device unless extended length rod

TDSR is specified

Square D 9422 device unless extra long connecting rod

9422-R2 is specified

Note: Some devices require two rods, consult the device

manufacturer (Westinghouse AMT below handle device)

5. Disconnects and related components are available from

the manufacturer

6. The disconnect ordering information provided is derived

from information supplied by the manufacturer of the

equipment to be installed. Fit and function of all

equipment should be checked before and after installation

to assure proper and safe operation and compliance with

the applicable regulations, codes and standards.

Modular Encl.

270

Type 12 Modular Enclosures