SPECIFICATION * Samsung P/N : CL31B225KPFNNNE , 10V, 10%, X7R, 1206 * Description : CAP, 2.2 * Supplier : Samsung electro-mechanics * Product : Multi-layer Ceramic Capacitor A. Samsung Part Number Series Size Dielectric Capacitance Capacitance tolerance Rated Voltage Thickness CL 31 B 225 K P F N N N E Samsung Multi-layer Ceramic Capacitor 1206 (inch code) L: 3.2 0.15 mm 1.6 W: Inner electrode Termination X7R 2.2 10 % Ni Cu Sn 100% Plating 10 V 1.25 0.15 mm 0.15 mm (Pb Free) Product Special Normal Packaging Embossed Type, 7" reel Reserved for future use B. Samsung Reliablility Test and Judgement condition Performance 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X7R Characterisitcs Adhesive Strength (From -55 to 125, Capacitance change shoud be within 15%) No peeling shall be occur on the 500gF, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.05 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface SnAg3.0Cu0.5 solder is to be soldered newly 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 7.5% Solder pot : 2705, 101sec. Performance Vibration Test Capacitance change : within 5% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan : IR : Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% With rated voltage 0.075 max 402, 90~95%RH, 500+12/-0hrs 500Mohm or 25Mohm Whichever is Smaller High Temperature Capacitance change : Resistance Tan : IR : Test condition within 12.5% With 200% 0.075 max Max. operating temperature 1000Mohm or 50Mohm Whichever is Smaller Temperature Capacitance change : Cycling Tan , IR : initial spec. of the rated voltage within 7.5% 1000+48/-0hrs 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.