TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUAR Y 1997 – REVISED MARCH 2001
1
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
D
Output Swing includes Both Supply Rails
D
Low Noise . . . 12 nV/√Hz Typ at f = 1 kHz
D
Low Input Bias Current ...1 pA Typ
D
Fully Specified for Both Single-Supply and
Split-Supply Operation
D
Low Power . . . 500 µA Max
D
Common-Mode Input Voltage Range
Includes Negative Rail
D
Low Input Offset Voltage
950 µV Max at TA = 25°C (TLC2262A)
D
Macromodel Included
D
Performance Upgrade for the TS27M2/M4
and TLC27M2/M4
D
Available in Q-Temp Automotive
HighRel Automotive Applications
Configuration Control/Print Support
Qualification to Automotive Standards
description
The TLC2262 and TLC2264 are dual and
quadruple operational amplifiers from Texas
Instruments. Both devices exhibit rail-to-rail
output performance for increased dynamic range
in single- or split-supply applications. The
TLC226x family offers a compromise between the
micropower TLC225x and the ac performance of
the TLC227x. It has low supply current for
battery-powered applications, while still having
adequate ac performance for applications that
demand it. The noise performance has been
dramatically improved over previous generations
of CMOS amplifiers. Figure 1 depicts the low level
of noise voltage for this CMOS amplifier, which
has only 200 µA (typ) of supply current per
amplifier.
The TLC226x, exhibiting high input impedance
and low noise, are excellent for small-signal
conditioning for high-impedance sources, such as
piezoelectric transducers. Because of the micro-
power dissipation levels, these devices work well
in hand-held monitoring and remote-sensing
applications. In addition, the rail-to-rail output feature with single or split supplies makes this family a great
choice when interfacing with analog-to-digital converters (ADCs). For precision applications, the TLC226xA
family is available and has a maximum input offset voltage of 950 µV. This family is fully characterized at 5 V
and ±5 V.
The TLC2262/4 also makes great upgrades to the TLC27M2/L4 or TS27M2/L4 in standard designs. They offer
increased output dynamic range, lower noise voltage and lower input offset voltage. This enhanced feature set
allows them to be used in a wider range of applications. For applications that require higher output drive and
wider input voltage range, see the TL V2432 and TL V2442. If your design requires single amplifiers, please see
the TLV2211/21/31 family. These devices are single rail-to-rail operational amplifiers in the SOT-23 package.
Their small size and low power consumption, make them ideal for high density, battery-powered equipment.
Copyright 2001, Texas Instruments Incorporated
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of Texas Instruments
standard warranty. Production processing does not necessarily include
testing of all parameters.
Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of
Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet.
Advanced LinCMOS is a trademark of Texas Instruments.
40
20
10
0
60
30
VN – Equivalent Input Noise Voltage – nv//Hz
50
f – Frequency – Hz
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
10 102103104
nV/ Hz
Vn
VDD = 5 V
RS = 20 Ω
TA = 25°C
Figure 1
On products compliant to MIL-PRF-38535, all parameters are tested
unless otherwise noted. On all other products, production
processing does not necessarily include testing of all parameters.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
2POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262 AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(JG)
PLASTIC
DIP
(P)
TSSOP
(PW)
CERAMIC
FLATPACK
(U)
0°C to 70°C2.5 mV TLC2262CD — — TLC2262CP TLC2262CPW —
40°Cto125°C
950
µ
V TLC2262AID — — TLC2262AIP TLC2262AIPW —
–
40°C
to
125°C
µ
2.5 mV TLC2262ID — — TLC2262IP — —
40°Cto125°C
950
µ
V TLC2262AQD — — — — —
–
40°C
to
125°C
µ
2.5 mV TLC2262QD — — — — —
–55°C to 125°C950 µV
2.5 mV —
—TLC2262AMFK
TLC2262MFK TLC2262AMJG
TLC2262MJG —
——
—TLC2262AMU
TLC2262MU
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2262CDR). The PW package is available only left-end taped
and reeled. Chips are tested at 25°C.
TLC2264 AVAILABLE OPTIONS
PACKAGED DEVICES
TAVIOmax
AT 25°CSMALL
OUTLINE
(D)
CHIP
CARRIER
(FK)
CERAMIC
DIP
(J)
PLASTIC
DIP
(N)
TSSOP
(PW)
CERAMIC
FLATPACK
(W)
0°C to 70°C2.5 mV TLC2264CD — — TLC2264CN TLC2264CPW —
40°Cto125°C
950
µ
V TLC2264AID — — TLC2264AIN TLC2264AIPW —
–
40°C
to
125°C
µ
2.5 mV TLC2264ID — — TLC2264IN — —
40
°
Cto125
°
C
950
µ
V TLC2264AQD — — — — —
–
40°C
to
125°C
µ
2.5 mV TLC2264QD — — — — —
–55°C to 125°C950 µV
2.5 mV —
—TLC2264AMFK
TLC2264MFK TLC2264AMJ
TLC2264MJ —
——
—TLC2264AMW
TLC2264MW
The D packages are available taped and reeled. Add R suffix to device type (e.g., TLC2264CDR). The PW package is available only left-end taped
and reeled. Chips are tested at 25°C.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
3
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262M, TLC2262AM . . . JG PACKAGE
(TOP VIEW)
TLC2262C, TLC2262AC
TLC2262I, TLC2262AI
TLC2262Q, TLC2262AQ
D, P, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
VDD–/GND
VDD+
2OUT
2IN–
2IN+
NC
VCC +
2OUT
2IN –
2IN +
NC
1OUT
1IN –
1IN +
VCC–/GND
1
2
3
4
5
10
9
8
7
6
TLC2262M, TLC2262AM ...U PACKAGE
(TOP VIEW)
1
2
3
4
8
7
6
5
1OUT
1IN–
1IN+
VDD–/GND
VDD+
2OUT
2IN–
2IN+
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
NC
2OUT
NC
2IN–
NC
NC
1IN–
NC
1IN+
NC
NC
1OUT
NC
2IN+
NC NC
NC
NC VDD+
VDD–
TLC2262M, TLC2262AM . . . FK PACKAGE
(TOP VIEW)
/GND
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
VDD+
2IN+
2IN–
2OUT
4OUT
4IN–
4IN+
VDD–/GND
3IN+
3IN–
3OUT
3 2 1 20 19
910111213
4
5
6
7
8
18
17
16
15
14
4IN+
NC
VCC–/GND
NC
3IN+
1IN+
NC
VCC+
NC
2IN+
1IN –
1OUT
NC
3OUT
3IN –4OUT
4IN –
2IN –
2OUT
NC
TLC2264M, TLC2264AM . . . FK PACKAGE
(TOP VIEW)
TLC2264C, TLC2264AC
TLC2264I, TLC2264AI
TLC2264Q, TLC2264AQ
D, N, OR PW PACKAGE
(TOP VIEW)
1
2
3
4
5
6
7
14
13
12
11
10
9
8
1OUT
1IN–
1IN+
VDD+
2IN+
2IN–
2OUT
4OUT
4IN–
4IN+
VDD–/GND
3IN+
3IN–
3OUT
TLC2264M, TLC2264AM ...J OR W PACKAGE
(TOP VIEW)
NC – No internal connection
NC – No internal connection
NC – No internal connection
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
4POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
equivalent schematic (each amplifier)
Q3 Q6 Q9 Q12 Q14 Q16
Q2 Q5 Q7 Q8 Q10 Q11
D1
Q17Q15Q13
Q4Q1
R5
C1
VDD+
IN+
IN–
R3 R4 R1 R2
OUT
VDD–/GND
ACTUAL DEVICE COMPONENT COUNT†
COMPONENT TLC2262 TLC2264
Transistors 38 76
Resistors 28 56
Diodes 9 18
Capacitors 3 6
†Includes both amplifiers and all ESD, bias, and trim circuitry
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
5
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)†
Supply voltage, VDD+ (see Note 1) 8 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply voltage, VDD– (see Note 1) –8 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Differential input voltage, VID (see Note 2) ±16 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input voltage, VI (any input, see Note 1) VDD– – 0.3 V to VDD+
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Input current, II (each input) ±5 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Output current, IO ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current into VDD+ ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Total current out of VDD– ±50 mA. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Duration of short-circuit current at (or below) 25°C (see Note 3) unlimited. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Continuous total dissipation See Dissipation Rating Table. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating free-air temperature range, TA: C suffix 0°C to 70°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
I suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Q suffix –40°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
M suffix –55°C to 125°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Storage temperature range, Tstg –65°C to 150°C. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds: D, N, P, and PW packages 260°C. . . . . . .
J, JG, U, and W packages 300°C. . . . . . .
†Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings only , and
functional operation of the device at these or any other conditions beyond those indicated under “recommended operating conditions” is not
implied. Exposure to absolute-maximum-rated conditions for extended periods may af fect device reliability.
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VDD+ and VDD –.
2. Differential voltages are at IN+ with respect to IN–. Excessive current flows if input is brought below VDD– – 0.3 V.
3. The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum
dissipation rating is not exceeded.
DISSIPATION RATING TABLE
PACKAGE
T
A
≤ 25°CDERATING FACTOR T
A
= 70°C T
A
= 85°C T
A
= 125°C
PACKAGE
A
POWER RATING ABOVE TA = 25°C
A
POWER RATING
A
POWER RATING
A
POWER RATING
D–8725 mW 5.8 mW/°C464 mW 377 mW 145 mW
D–14 950 mW 7.6 mW/°C 608 mW 494 mW 190 mW
FK 1375 mW 11.0 mW/°C 880 mW 715 mW 275 mW
J1375 mW 11.0 mW/°C 880 mW 715 mW 275 mW
JG 1050 mW 8.4 mW/°C 672 mW 546 mW 210 mW
N1150 mW 9.2 mW/°C 736 mW 598 mW 230 mW
P1000 mW 8.0 mW/°C 640 mW 520 mW 200 mW
PW–8525 mW 4.2 mW/°C 336 mW 273 mW 105 mW
PW–14 700 mW 5.6 mW/°C 448 mW 364 mW 140 mW
U700 mW 5.5 mW/°C 452 mW 370 mW 150 mW
W700 mW 5.5 mW/°C452 mW 370 mW 150 mW
recommended operating conditions
C SUFFIX I SUFFIX Q SUFFIX M SUFFIX
UNIT
MIN MAX MIN MAX MIN MAX MIN MAX
UNIT
Supply voltage, VDD±±2.2 ±8±2.2 ±8±2.2 ±8±2.2 ±8 V
Input voltage range, VIVDD–VDD+ –1.5 VDD–VDD+ –1.5 VDD–VDD+ –1.5 VDD–VDD+ –1.5 V
Common-mode input voltage, VIC VDD–VDD+ –1.5 VDD–VDD+ –1.5 VDD–VDD+ –1.5 VDD–VDD+ –1.5 V
Operating free-air temperature, TA0 70 –40 125 –40 125 –55 125 °C
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
6POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262C electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2262C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500
µV
V
IO
Input
offset
voltage
Full range 3000 µ
V
αVIO Temperature coefficient of input of fset voltage 25°C
to 70°C2µV/°C
Input offset voltage long-term drift
(see Note 4) VIC = 0,
VO = 0, VDD± = ±2.5 V,
RS = 50 Ω25°C 0.003 µV/mo
IIO
In
p
ut offset current
O
S
25°C 0.5 p
A
I
IO
Input
offset
current
Full range 100
pA
IIB
In
p
ut bias current
25°C 1 p
A
I
IB
Input
bias
current
Full range 100
pA
VICR
Common mode in
p
ut voltage range
RS=50Ω
|VIO|≤5mV
25°C0
to
4
–0.3
to
4.2
V
V
ICR
Common
-
mode
input
voltage
range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range 0
to
3.5
V
IOH = –20 µA 25°C 4.99
IOH = 100 µA
25°C 4.85 4.94
VOH High-level output voltage
I
OH = –
100
µ
A
Full range 4.82 V
IOH = 400 µA
25°C 4.70 4.85
I
OH = –
400
µ
A
Full range 4.60
VIC = 2.5 V, IOL = 50 µA 25°C 0.01
VIC =25V
IOL = 500 µA
25°C 0.09 0.15
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15
VOL Low-level output voltage
VIC =25V
IOL =1
m
A
25°C 0.2 0.3 V
V
IC =
2
.
5
V
,
I
OL =
1
m
A
Full range 0.3
VIC =25V
IOL =4
m
A
25°C 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2
V25V
R50kه
25°C 80 170
AVD Large-signal dif ferential voltage amplification VIC = 2.5 V,
VO=1Vto4V
R
L =
50
kه
Full range 55 V/mV
VD
gg g
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550
ri(d) Differential input resistance 25°C1012 Ω
ri(c) Common-mode input resistance 25°C1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz, P package 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 240 Ω
CMRR
Common mode rejection ratio
V
IC
= 0 to 2.7 V, V
O
= 2.5 V, 25°C 70 83
dB
CMRR
Common
-
mode
rejection
ratio
IC ,O,
RS = 50 ΩFull range 70
dB
kSVR
Su
pp
ly voltage rejection ratio (∆VDD/∆VIO)
V
DD
= 4.4 V to 16 V, 25°C 80 95
dB
k
SVR
Supply
-
voltage
rejection
ratio
(∆V
DD
/∆V
IO
)
DD ,
VIC = VDD/2, No load Full range 80
dB
IDD
Su
pp
ly current
VO=25V
No load
25°C 400 500
µA
I
DD
Supply
current
V
O =
2
.
5
V
,
No
load
Full range 500 µ
A
†Full range is 0°C to 70°C.
‡Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
7
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262C operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2262C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
SR
Slew rate at unity gain
V
O
= 1.5 V to 3.5 V, R
L
= 50 kΩ
‡
,25°C 0.35 0.55
V/µs
SR
Slew
rate
at
unity
gain
O,
CL = 100 pF‡
L,
Full range 0.3
V/
µ
s
V
Equivalent in
p
ut noise voltage
f = 10 Hz 25°C 40
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C 12 n
V/√H
z
VN(PP)
Peak-to-peak equivalent input noise f = 0.1 Hz to 1 Hz 25°C 0.7
µV
V
N(PP)
q
voltage f = 0.1 Hz to 10 Hz 25°C 1.3 µ
V
InEquivalent input noise current 25°C 0.6 fA√Hz
THD+N
Total harmonic distortion
p
lus noise
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017%
THD
+
N
Total
harmonic
distortion
plus
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03%
Gain-bandwidth product f = 10 kHz,
CL = 100 pF‡RL = 50 kΩ‡,25°C 0.71 MHz
BOM Maximum output-swing bandwidth VO(PP) = 2 V,
RL = 50 kه,AV = 1,
CL = 100 pF‡25°C 185 kHz
AV
=–
1,
To 0 1%
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25°C
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
φmPhase margin at unity gain
RL=50kه
CL= 100
p
F‡
25°C 56°
Gain margin
R
L =
50
kه
,
C
L =
100
pF‡
25°C11 dB
†Full range is 0°C to 70°C.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
8POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262C electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise specified)
PARAMETER
TEST CONDITIONS
TA†
TLC2262C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500
µV
V
IO
Input
offset
voltage
Full range 3000 µ
V
αVIO
Tem
p
erature coefficient of in
p
ut offset voltage
25°C
2
µV/°C
αVIO
Temperature
coefficient
of
input
offset
voltage
to 70°C
2
µ
V/°C
Input offset voltage long-term drift (see Note 4) VIC = 0,
RS=50Ω
VO = 0, 25°C 0.003 µV/mo
IIO
In
p
ut offset current
RS
=
50
Ω
25°C 0.5 p
A
I
IO
Input
offset
current
Full range 100
pA
IIB
In
p
ut bias current
25°C 1 p
A
I
IB
Input
bias
current
Full range 100
pA
–5–5.3
25°C
5
to
5.3
to
VICR
Common mode in
p
ut voltage range
|VIO|≤5mV
RS=50Ω
4 4.2
V
V
ICR
Common
-
mode
input
voltage
range
|V
IO
|
≤5
mV
,
R
S =
50
Ω
–5
V
Full range
5
to
g
3.5
IO = –20 µA 25°C 4.99
IO= 100 µA
25°C 4.85 4.94
VOM+ Maximum positive peak output voltage
I
O = –
100
µ
A
Full range 4.82 V
IO= 400 µA
25°C 4.7 4.85
I
O = –
400
µ
A
Full range 4.6
VIC = 0, IO = 50 µA 25°C–4.99
VIC =0
IO= 500 µA
25°C–4.85 –4.91
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85
VOM–Maximum negative peak output voltage
VIC =0
IO=1
m
A
25°C–4.7 –4.8 V
V
IC =
0
,
I
O =
1
m
A
Full range –4.7
VIC =0
IO=4
m
A
25°C–4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8
RL=50kΩ
25°C 80 200
AVD Large-signal dif ferential voltage amplification VO = ±4 V
R
L =
50
kΩ
Full range 55 V/mV
RL = 1 MΩ25°C 1000
ri(d) Differential input resistance 25°C1012 Ω
ri(c) Common-mode input resistance 25°C1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz, P package 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 220 Ω
CMRR
Common mode rejection ratio
V
IC
= –5 V to 2.7 V, 25°C 75 88
dB
CMRR
Common
-
mode
rejection
ratio
IC ,
VO = 0 V, RS = 50 ΩFull range 75
dB
kSVR
Su
pp
ly voltage rejection ratio (∆VDD±/∆VIO)
V
DD±
= 2.2 V to ±8 V, 25°C 80 95
dB
k
SVR
Supply
-
voltage
rejection
ratio
(∆V
DD±
/∆V
IO
)
DD±,
VIC = 0, No load Full range 80
dB
IDD
Su
pp
ly current
VO=0V
No load
25°C 425 500
µA
I
DD
Supply
current
V
O =
0
V
,
No
load
Full range 500 µ
A
†Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
9
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262C operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2262C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VO=±19V
RL=50kΩ
25°C 0.35 0.55
SR Slew rate at unity gain
V
O =
±1
.
9
V
,
CL
=
100
p
F
R
L =
50
kΩ
Full
03
V/µs
CL
=
100
F
range
0
.
3
V
Equivalent in
p
ut noise voltage
f = 10 Hz 25°C 43
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C 12 n
V/√H
z
VN(PP)
Peak-to-peak equivalent input noise f = 0.1 Hz to 1 Hz 25°C 0.8
µV
V
N(PP)
q
voltage f = 0.1 Hz to 10 Hz 25°C 1.3 µ
V
InEquivalent input noise current 25°C 0.6 fA√Hz
THD+N
Total harmonic distortion
p
ulse duration
VO = ±2.3 V,
f 20 kHz
AV = 1
25°C
0.014%
THD
+
N
Total
harmonic
distortion
pulse
duration
f
=
20
kH
z,
RL = 50 kΩAV = 10
25°C
0.024%
Gain bandwidth
p
roduct
f = 10 kHz, R
L
= 50 kΩ
25°C
073
MHz
Gain
-
bandwidth
product
,
CL = 100 pF
L
25°C
0
.
73
MHz
BOM
Maximum out
p
ut swing bandwidth
VO
(
PP
)
= 4.6 V, AV = 1,
25°C
85
kHz
B
OM
Maximum
output
-
swing
bandwidth
O(PP)
RL = 50 kΩ,
V
CL = 100 pF
25°C
85
kHz
AV
=–
1,
To 0 1%
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25
°
C
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
φmPhase margin at unity gain
RL=50kΩ
CL= 100
p
F
25°C 57°
Gain margin
R
L =
50
kΩ
,
C
L =
100
pF
25°C11 dB
†Full range is 0°C to 70°C.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
10 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264C electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2264C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500
µV
V
IO
Input
offset
voltage
Full range 3000 µ
V
αVIO Temperature coefficient of input of fset voltage 25°C
to 70°C2µV/°C
Input offset voltage long-term drift
(see Note 4) VIC = 0,
VO = 0, VDD± = ±2.5 V,
RS = 50 Ω25°C0.003 µV/mo
IIO
In
p
ut offset current
O
S
25°C 0.5 p
A
I
IO
Input
offset
current
Full range 100
pA
IIB
In
p
ut bias current
25°C 1 p
A
I
IB
Input
bias
current
Full range 100
pA
VICR
Common mode in
p
ut voltage range
RS=50Ω
|VIO|≤5mV
25°C0
to
4
–0.3
to
4.2
V
V
ICR
Common
-
mode
input
voltage
range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range 0
to
3.5
V
IOH = –20 µA 25°C 4.99
IOH = 100 µA
25°C 4.85 4.94
VOH High-level output voltage
I
OH = –
100
µ
A
Full range 4.82 V
IOH = 400 µA
25°C 4.70 4.85
I
OH = –
400
µ
A
Full range 4.60
VIC = 2.5 V, IOL = 50 µA 25°C 0.01
VIC =25V
IOL = 500 µA
25°C 0.09 0.15
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15
VOL Low-level output voltage
VIC =25V
IOL =1
m
A
25°C 0.2 0.3 V
V
IC =
2
.
5
V
,
I
OL =
1
m
A
Full range 0.3
VIC =25V
IOL =4
m
A
25°C 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2
V25V
R50kه
25°C 80 170
AVD Large-signal dif ferential voltage amplification VIC = 2.5 V,
VO=1Vto4V
R
L =
50
kه
Full range 55 V/mV
VD
gg g
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550
ri(d) Differential input resistance 25°C1012 Ω
ri(c) Common-mode input resistance 25°C1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz, N package 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 240 Ω
CMRR
Common mode rejection ratio
V
IC
= 0 to 2.7 V, V
O
= 2.5 V, 25°C 70 83
dB
CMRR
Common
-
mode
rejection
ratio
IC ,
RS = 50 Ω
O,
Full range 70
dB
kSVR
Su
pp
ly voltage rejection ratio (∆VDD/∆VIO)
VDD = 4.4 V to 16 V, 25°C 80 95
dB
k
SVR
Supply
-
voltage
rejection
ratio
(∆V
DD
/∆V
IO
)
VIC = VDD/2, No load Full range 80
dB
IDD
Su
pp
ly current (four am
p
lifiers)
VO=25V
No load
25°C 0.8 1
mA
I
DD
Supply
current
(four
amplifiers)
V
O =
2
.
5
V
,
No
load
Full range 1
mA
†Full range is 0°C to 70°C.
‡Referenced to 2.5 V
NOTE 4. Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
11
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264C operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
T†
TLC2264C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VO=14Vto26V
RL=50kه
25°C 0.35 0.55
SR Slew rate at unity gain
V
O =
1
.
4
V
to
2
.
6
V
,
CL
=
100
p
F
‡
R
L =
50
kه
,Full
03
V/µs
CL
=
100
F‡
range
0
.
3
V
Equivalent in
p
ut noise voltage
f = 10 Hz 25°C 40
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C 12 n
V/√H
z
VN(PP)
Peak-to-peak equivalent input noise f = 0.1 Hz to 1 Hz 25°C 0.7
µV
V
N(PP)
q
voltage f = 0.1 Hz to 10 Hz 25°C 1.3 µ
V
InEquivalent input noise current 25°C 0.6 fA/√Hz
THD+N
Total harmonic distortion
p
lus noise
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017%
THD
+
N
Total
harmonic
distortion
plus
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03%
Gain-bandwidth product f = 10 kHz,
CL = 100 pF‡RL = 50 kΩ‡,25°C 0.71 MHz
BOM Maximum output-swing bandwidth VO(PP) = 2 V,
RL = 50 kه,AV = 1,
CL = 100 pF‡25°C 185 kHz
AV
=–
1,
To 0 1%
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25
°
C
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
φmPhase margin at unity gain
RL=50kه
CL= 100
p
F‡
25°C56°
Gain margin
R
L =
50
kه
,
C
L =
100
pF‡
25°C11 dB
†Full range is 0°C to 70°C.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
12 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264C electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise specified)
PARAMETER
TEST CONDITIONS
TA†
TLC2264C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500
µV
V
IO
Input
offset
voltage
Full range 3000 µ
V
αVIO
Tem
p
erature coefficient of in
p
ut offset voltage
25°C
2
µV/°C
αVIO
Temperature
coefficient
of
input
offset
voltage
to 70°C
2
µ
V/°C
Input offset voltage long-term drift (see Note 4) VIC = 0,
RS=50Ω
VO = 0, 25°C0.003 µV/mo
IIO
In
p
ut offset current
RS
=
50
Ω
25°C 0.5 p
A
I
IO
Input
offset
current
Full range 100
pA
IIB
In
p
ut bias current
25°C 1 p
A
I
IB
Input
bias
current
Full range 100
pA
–5–5.3
25°C
5
to
5.3
to
VICR
Common mode in
p
ut voltage range
|VIO|≤5mV
RS=50Ω
4 4.2
V
V
ICR
Common
-
mode
input
voltage
range
|V
IO
|
≤5
mV
,
R
S =
50
Ω
–5
V
Full range
5
to
g
3.5
IO = –20 µA 25°C 4.99
IO= 100 µA
25°C 4.85 4.94
VOM+ Maximum positive peak output voltage
I
O = –
100
µ
A
Full range 4.82 V
IO= 400 µA
25°C 4.7 4.85
I
O = –
400
µ
A
Full range 4.6
VIC = 0, IO = 50 µA 25°C–4.99
VIC =0
IO= 500 µA
25°C–4.85 –4.91
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85
VOM–Maximum negative peak output voltage
VIC =0
IO=1
m
A
25°C–4.7 –4.8 V
V
IC =
0
,
I
O =
1
m
A
Full range –4.7
VIC =0
IO=4
m
A
25°C–4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8
RL=50kΩ
25°C 80 200
AVD Large-signal dif ferential voltage amplification VO = ±4 V
R
L =
50
kΩ
Full range 55 V/mV
RL = 1 MΩ25°C 1000
ri(d) Differential input resistance 25°C1012 Ω
ri(c) Common-mode input resistance 25°C1012 Ω
ci(c) Common-mode input capacitance f = 10 kHz, N package 25°C 8 pF
zoClosed-loop output impedance f = 100 kHz, AV = 10 25°C 220 Ω
CMRR
Common mode rejection ratio
VIC = –5 V to 2.7 V, 25°C 75 88
dB
CMRR
Common
-
mode
rejection
ratio
VO = 0, RS = 50 ΩFull range 75
dB
kSVR
Su
pp
ly voltage rejection ratio (∆VDD±/∆VIO)
VDD± = ±2.2 V to ±8 V, 25°C 80 95
dB
k
SVR
Supply
-
voltage
rejection
ratio
(∆V
DD±
/∆V
IO
)
VIC = 0, No load Full range 80
dB
IDD
Su
pp
ly current (four am
p
lifiers)
VO=0
No load
25°C 0.85 1
mA
I
DD
Supply
current
(four
amplifiers)
V
O =
0
,
No
load
Full range 1
mA
†Full range is 0°C to 70°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
13
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264C operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
T†
TLC2264C
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX
UNIT
VO=±19V
RL=50kΩ
25°C 0.35 0.55
SR Slew rate at unity gain
V
O =
±1
.
9
V
,
CL
=
100
p
F
R
L =
50
kΩ
,Full
03
V/µs
CL
=
100
F
range
0
.
3
V
Equivalent in
p
ut noise voltage
f = 10 Hz 25°C 43
nV/√Hz
V
n
Equivalent
input
noise
voltage
f = 1 kHz 25°C 12 n
V/√H
z
VN(PP)
Peak-to-peak equivalent input noise f = 0.1 Hz to 1 Hz 25°C 0.8
µV
V
N(PP)
q
voltage f = 0.1 Hz to 10 Hz 25°C 1.3 µ
V
InEquivalent input noise current 25°C 0.6 fA/√Hz
THD+N
Total harmonic distortion
p
lus noise
VO = ±2.3 V,
f 20 kHz
AV = 1
25°C
0.014%
THD
+
N
Total
harmonic
distortion
plus
noise
f
=
20
kH
z,
RL = 50 kΩAV = 10
25°C
0.024%
Gain bandwidth
p
roduct
f = 10 kHz, R
L
= 50 kΩ,
25°C
073
MHz
Gain
-
bandwidth
product
,
CL = 100 pF
L,
25°C
0
.
73
MHz
BOM
Maximum out
p
ut swing bandwidth
V
O(PP)
= 4.6 V, A
V
= 1,
25°C
70
kHz
B
OM
Maximum
output
-
swing
bandwidth
O(PP) ,
RL = 50 kΩ,
V,
CL = 100 pF
25°C
70
kHz
AV
=–
1,
To 0 1%
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25°C
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
φmPhase margin at unity gain
RL=50kΩ
CL= 100
p
F
25°C57°
Gain margin
R
L =
50
kΩ
,
C
L =
100
pF
25°C11 dB
†Full range is 0°C to 70°C.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
14 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2262I TLC2262AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO
Temperature
coefficient
25°C
2
2
µV/°C
αVIO
coefficient
of input offset voltage to 85°C
2
2
µ
V/°C
Input offset voltage
long-term drift
(see Note 4) VDD± = ±2.5 V,
V
O
= 0, VIC = 0,
R
S
= 50 Ω25°C0.003 0.003 µV/mo
O,
S
25°C 0.5 0.5 p
A
IIO Input offset current 85°C 150 150
pA
Full range 800 800 pA
I
25°C 1 1 pA
I
IB Input bias current 85°C 150 150 pA
Full range 800 800 pA
0–0.3 0 –0.3
25°Cto to to to
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
4 4.2 4 4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
0 0
V
Full range to to
g
3.5 3.5
IOH = –20 µA 25°C 4.99 4.99
High level output
IOH = 100 µA
25°C 4.85 4.94 4.85 4.94
VOH
Hi
g
h
-
l
eve
l
ou
t
pu
t
voltage
I
OH = –
100
µ
A
Full range 4.82 4.82 V
voltage
IOH = 400 µA
25°C 4.7 4.85 4.7 4.85
I
OH = –
400
µ
A
Full range 4.5 4.5
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
Low level output
VIC =25V
IOL = 500 µA
25°C 0.09 0.15 0.09 0.15
VOL
L
ow-
l
eve
l
ou
t
pu
t
voltage
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15 0.15 V
voltage
VIC =25V
IOL =4
m
A
25°C 0.8 1 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2 1.2
Lar
g
e-si
g
nal
V25V
RL50 kه
25°C 80 100 80 170
AVD
Large signal
differential
V
IC =
2
.
5
V
,
VO=1Vto4V
R
L =
50
kه
Full range 50 50 V/mV
VD
voltage amplification
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550 550
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ri(c) Common-mode input
resistance 25°C 1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, P package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 240 240 Ω
CMRR
Common-mode V
IC
= 0 to 2.7 V, V
O
= 2.5 V, 25°C 70 83 70 83
dB
CMRR
rejection ratio
IC ,O,
RS = 50 ΩFull range 70 70
dB
†Full range is – 40°C to 125°C.
‡Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
15
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262I operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2262I TLC2262AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
Suppl
y
-volta
g
e re-
VDD =44Vto16V
25°C80 95 80 95
kSVR
yg
jection ratio
(∆VDD/∆VIO)
V
DD =
4
.
4
V
to
16
V
,
VIC = VDD/2, No load Full
range 80 80 dB
25°C400 500 400 500
IDD Supply current VO = 2.5 V, No load Full
range 500 500 µA
Slew rate at unity
VO=15Vto35V
RL50 kه
25°C0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
1
.
5
V
to
3
.
5
V
,
CL
=
100
p
F
‡
R
L =
50
kه
,Full
025
025
V/µs
gain
CL
=
100
F‡
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 40 40
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA√Hz
THD+N
Total harmonic
distortion
p
lus
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017% 0.017%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03% 0.03%
Gain-bandwidth f = 50 kHz
,
R
L
= 50 kΩ
‡,
25°C
082
082
MHz
product
f
50
kHz,
CL = 100 pF‡
RL
50
kΩ,
25°C
0
.
82
0
.
82
MHz
BOM
Maximum output- V
O(PP)
= 2 V, A
V
= 1,
25°C
185
185
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kه,
V,
CL = 100 pF‡
25°C
185
185
kHz
AV
=–
1,
To 0 1%
64
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25°C
6
.
4
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
14
.
1
φmPhase margin at
unity gain R
L
= 50 kΩ
‡
, C
L
= 100 pF
‡
25°C 56°56°
Gain margin
L,
L
25°C11 11 dB
†Full range is – 40°C to 125°C.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
16 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262I electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2262I TLC2262AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO
Temperature coefficient of 25°C
2
2
µV/°C
αVIO input offset voltage to 85°C
2
2
µ
V/°C
Input offset voltage
long-term drift
(see Note 4) VIC = 0,
R50Ω
VO = 0 25°C0.003 0.003 µV/mo
RS = 50 Ω25°C 0.5 0.5 pA
IIO Input offset current 85°C 150 150 pA
Full range 800 800 pA
25°C 1 1 pA
IIB Input bias current 85°C 150 150 pA
Full range 800 800 pA
25
°
C
–5–5.3 –5–5.3
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
25°C
to 4 to 4.2 to 4 to 4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range
–5–5
V
Full
range
to 3.5 to 3.5
IO = –20 µA 25°C 4.99 4.99
M i iti k
IO= 100 µA
25°C 4.85 4.94 4.85 4.94
VOM+ Maximum positive peak
out
p
ut voltage
I
O = –
100
µ
A
Full range 4.82 4.82 V
out ut
voltage
IO= 400 µA
25°C 4.7 4.85 4.7 4.85
I
O = –
400
µ
A
Full range 4.5 4.5
VIC = 0, IO = 50 µA 25°C–4.99 –4.99
M i ti k
VIC =0
IO= 500 µA
25°C–4.85 –4.91 –4.85 –4.91
VOM–Maximum negative peak
out
p
ut voltage
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85 –4.85 V
out ut
voltage
VIC =0
IO=4
m
A
25°C–4–4.3 –4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8 –3.8
L i l diff ti l
RL=50kΩ
25°C 80 200 80 200
AVD Large-signal dif ferential
voltage am
p
lification
VO = ±4 V
R
L =
50
kΩ
Full range 50 50 V/mV
voltage
am lification
RL = 1 MΩ25°C 1000 1000
ri(d) Differential input
resistance 25°C1012 1012 Ω
ri(c) Common-mode input
resistance 25°C1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, P package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 220 220 Ω
CMRR
Common-mode V
IC
= –5 V to 2.7 V, 25°C 75 88 75 88
dB
CMRR
rejection ratio
IC ,
VO = 0, RS = 50 ΩFull range 75 75
dB
kSVR
Supply-volta
g
e rejection V
DD
= 4.4 V to 16 V, 25°C 80 95 80 95
dB
k
SVR
ygj
ratio (∆VDD± /∆VIO)
DD ,
VIC = VDD/2, No load Full range 80 80
dB
†Full range is – 40°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
17
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262I operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
TA†
TLC2262I TLC2262AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
25°C 425 500 425 500
IDD Supply Current VO = 2.5 V, No load Full
range 500 500
Slew rate at unity
VO=±19V
RL=50kΩ
25°C 0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
±1
.
9
V
,
CL
=
100
p
F
R
L =
50
kΩ
,Full
025
025
V/µs
gain
CL
=
100
F
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 43 43
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.8 0.8
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA√Hz
THD+N
Total harmonic
distortion
p
lus
VO = ±2.3 V,
RL50 kΩ
AV = 1
25°C
0.014% 0.014%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
R
L =
50
kΩ
,
f = 20 kHz AV = 10
25°C
0.024% 0.024%
Gain-bandwidth f =10 kHz, R
L
= 50 kΩ,
25°C
073
073
MHz
product
,
CL = 100 pF
L,
25°C
0
.
73
0
.
73
MHz
BOM
Maximum
out
p
ut swing
V
O(PP)
= 4.6 V, A
V
= 1,
25°C
85
85
kHz
B
OM ou
t
pu
t
-sw
i
ng
bandwidth
O(PP) ,
RL = 50 kΩ,
V,
CL = 100 pF
25°C
85
85
kHz
AV
=–
1,
To 0 1%
71
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25°C
7
.
1
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
16
.
5
φmPhase margin at
unity gain RL = 50 kΩ, CL = 100 pF 25°C 57°57°
Gain margin
L
L
25°C11 11 dB
†Full range is –40°C to 125°C.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
18 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264I electrical characteristics at specified free-air temperature, VDD = 5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
T†
TLC2264I TLC2264AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO Temperature coefficient
of input offset voltage 25°C
to 125°C2 2 µV/°C
Input offset voltage
long-term drift (see Note 4) V
DD±
=±2.5 V
,
V
IC
= 0
,
25°C 0.003 0.003 µV/mo
VDD±
±2.5
V,
VO = 0,
VIC
0,
RS = 50 Ω25°C0.5 0.5
IIO Input offset current 85°C 150 150 pA
Full range 800 800
25°C 1 1
IIB Input bias current 85°C 150 150 pA
Full range 800 800
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
25°C0
to
4
–0.3
to
4.2
0
to
4
–0.3
to
4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range 0
to
3.5
0
to
3.5
V
IOH = –20 µA 25°C 4.99 4.99
High level output
IOH = 100 µA
25°C 4.85 4.94 4.85 4.94
VOH
Hi
g
h
-
l
eve
l
ou
t
pu
t
voltage
I
OH = –
100
µ
A
Full range 4.82 4.82 V
voltage
IOH = 400 µA
25°C 4.7 4.85 4.7 4.85
I
OH = –
400
µ
A
Full range 4.5 4.5
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
Low level output
VIC =25V
IOL = 500 µA
25°C 0.09 0.15 0.09 0.15
VOL
L
ow-
l
eve
l
ou
t
pu
t
voltage
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15 0.15 V
voltage
VIC =25V
IOL =4
m
A
25°C 0.8 1 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2 1.2
Large signal differential
V25V
RL50 kه
25°C 80 100 80 170
AVD
L
arge-s
i
gna
l
diff
eren
ti
a
l
voltage am
p
lification
V
IC =
2
.
5
V
,
VO=1Vto4V
R
L =
50
kه
Full range 50 50 V/mV
VD
voltage
am lification
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550 550
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ri(c) Common-mode
input resistance 25°C 1012 1012 Ω
ci(c) Common-mode
input capacitance f = 10 kHz, N package 25°C 8 8 pF
zoClosed-loop
output impedance f = 100 kHz, AV = 10 25°C 240 240 Ω
CMRR
Common-mode VIC = 0 to 2.7 V, VO = 2.5 V, 25°C 70 83 70 83
dB
CMRR
rejection ratio
IC
RS = 50 Ω
O
Full range 70 70
dB
kSVR
Supply-voltage
rejection ratio
VDD = 4.4 V to 16 V, 25°C 80 95 80 95
dB
k
SVR re
j
ec
ti
on ra
ti
o
(∆VDD/∆VIO)VIC = VDD/2, No load Full range 80 80
dB
†Full range is – 40°C to 125°C.
‡Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
19
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264I operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER
TEST CONDITIONS
T†
TLC2264I TLC2264AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
Su
pp
ly current
25°C0.8 1 0.8 1
IDD
Supply
current
(four amplifiers) VO = 2.5 V, No load Full
range 1 1 V/µs
Slew rate at unity
VO14Vto26V
RL50 kه
25°C0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
1
.
4
V
t
o
2
.
6
V
,
CL
=
100
p
F‡
R
L =
50
kه
,Full
025
025
V/µs
gain
CL
=
100
F‡
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 40 40
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA/√Hz
THD+N
Total harmonic
distortion
p
lus
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017% 0.017%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03% 0.03%
Gain-bandwidth f = 50 kHz
,
R
L
= 50 kΩ
‡,
25°C
071
071
MHz
product
f
50
kHz,
CL = 100 pF‡
RL
50
kΩ,
25°C
0
.
71
0
.
71
MHz
BOM
Maximum output- V
O(PP)
= 2 V, A
V
= 1,
25
°
C
185
185
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kه,
V,
CL = 100 pF‡
25°C
185
185
kHz
AV
=–
1,
To 0 1%
64
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25
°
C
6
.
4
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
14
.
1
φmPhase margin at
unity gain R
L
= 50 kΩ
‡
, C
L
= 100 pF
‡
25°C 56°56°
Gain margin
L,
L
25°C11 11 dB
†Full range is – 40°C to 125°C.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
20 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264I electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless otherwise
noted)
PARAMETER
TEST CONDITIONS
TA†
TLC2264I TLC2264AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO
Temperature coefficient of 25°C
2
2
µV/°C
αVIO input offset voltage to 125°C
2
2
µ
V/°C
Input offset voltage
long-term drift
(see Note 4) VIC = 0,
RS50 Ω
VO = 0, 25°C0.003 0.003 µV/mo
R
S =
50
Ω
25°C 0.5 0.5
IIO Input offset current 85°C 150 150 pA
Full range 800 800
25°C 1 1 pA
IIB Input bias current 85°C 150 150 pA
Full range 800 800 pA
–5–5.3 –5–5.3
25°Cto to to to
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
4 4.2 4 4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
–5–5
V
Full range to to
g
3.5 3.5
IO = –20 µA 25°C 4.99 4.99
Maximum positive peak
IO= 100 µA
25°C 4.85 4.94 4.85 4.94
VOM+
M
ax
i
mum pos
iti
ve pea
k
out
p
ut voltage
I
O = –
100
µ
A
Full range 4.82 4.82 V
out ut
voltage
IO= 400 µA
25°C 4.7 4.85 4.7 4.85
I
O = –
400
µ
A
Full range 4.5 4.5
VIC = 0, IO = 50 µA 25°C–4.99 –4.99
Maximum negative peak
VIC =0
IO= 500 µA
25°C–4.85 –4.91 –4.85 –4.91
VOM–
M
ax
i
mum nega
ti
ve pea
k
out
p
ut voltage
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85 –4.85 V
out ut
voltage
VIC =0
IO=4
m
A
25°C–4–4.3 –4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8 –3.8
Large signal differential
RL=50kΩ
25°C 80 200 80 200
AVD
L
arge-s
i
gna
l
diff
eren
ti
a
l
voltage am
p
lification
VO = ±4 V
R
L =
50
kΩ
Full range 50 50 V/mV
voltage
am lification
RL = 1 MΩ25°C 1000 1000
ri(d) Differential input
resistance 25°C1012 1012 Ω
ri(c) Common-mode input
resistance 25°C1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, N package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 220 220 Ω
CMRR
Common-mode VIC = –5 V to 2.7 V, 25°C 75 88 75 88
dB
CMRR
rejection ratio VO = 0, RS = 50 ΩFull range 75 75
dB
kSVR
Supply-volta
g
e rejection VDD± = ±2.2 V to ±8 V, 25°C 80 95 80 95
dB
k
SVR
ygj
ratio (∆VDD±/∆VIO)VIC = VDD/2, No load Full range 80 80
dB
†Full range is – 40°C to 125°C.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
21
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264I operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER
TEST CONDITIONS
T†
TLC2264I TLC2264AI
UNIT
PARAMETER
TEST
CONDITIONS
T
A
†
MIN TYP MAX MIN TYP MAX
UNIT
Su
pp
ly current
25°C 0.85 1 0.85 1
IDD
Supply
current
(four amplifiers) VO = 0, No load Full
range 1 1
Slew rate at unity
VO=±19V
RL=50kΩ
25°C 0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
±1
.
9
V
,
CL
=
100
p
F
R
L =
50
kΩ
,Full
025
025
V/µs
gain
CL
=
100
F
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 43 43
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.8 0.8
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA/√Hz
THD+N
Total harmonic
distortion
p
lus
VO = ±2.3 V,
RL50 kΩ
AV = 1
25°C
0.014% 0.014%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
R
L =
50
kΩ
,
f = 20 kHz AV = 10
25°C
0.024% 0.024%
Gain-bandwidth f =10 kHz, R
L
= 50 kΩ,
25°C
073
073
MHz
product
,
CL = 100 pF
L,
25°C
0
.
73
0
.
73
MHz
BOM
Maximum output- V
O(PP)
= 4.6 V, A
V
= 1,
25
°
C
70
70
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kΩ,
V,
CL = 100 pF
25°C
70
70
kHz
AV
=–
1,
To 0 1%
71
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25
°
C
7
.
1
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
16
.
5
φmPhase margin at
unity gain RL = 50 kΩ, CL = 100 pF 25°C 57°57°
Gain margin
L
L
25°C11 11 dB
†Full range is –40°C to 125°C.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
22 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262Q/M electrical characteristics at specified free-air temperature, VDD = 5 V (unless
otherwise noted)
PARAMETER TEST CONDITIONS T
A
†TLC2262Q,
TLC2262M TLC2262AQ,
TLC2262AM UNIT
A
MIN TYP MAX MIN TYP MAX
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO
Temperature coefficient
Full range
5
5
µV/°C
αVIO of input offset voltage
Full
range
5
5
µ
V/°C
Input offset voltage
long-term drift
(see Note 4)
VDD± = ±2.5 V,
VO = 0, VIC = 0,
RS = 50 Ω25°C 0.003 0.003 µV/mo
IIO
In
p
ut offset current
25°C 0.5 0.5 p
A
I
IO
Input
offset
current
125°C 800 800
pA
IIB
In
p
ut bias current
25°C 1 1 p
A
I
IB
Input
bias
current
125°C 800 800
pA
25°C
0to4
–0.3
0to4
–0.3
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
25°C
0
to
4
to 4.2
0
to
4
to 4.2
V
VICR
volta
g
e ran
g
e
RS
=
50
Ω
,
|VIO|
≤5
mV
0to
0to
V
gg
Full ran
g
e
0
to
35
0
to
35
Full
range
3
.
5
3
.
5
IOH = –20 µA 25°C 4.99 4.99
High level output
IOH = 100 µA
25°C 4.85 4.94 4.85 4.94
VOH
Hi
g
h
-
l
eve
l
ou
t
pu
t
voltage
I
OH = –
100
µ
A
Full range 4.82 4.82 V
voltage
IOH = 400 µA
25°C 4.7 4.85 4.7 4.85
I
OH = –
400
µ
A
Full range 4.5 4.5
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
Low level output
VIC =25V
IOL = 500 µA
25°C 0.09 0.15 0.09 0.15
VOL
L
ow-
l
eve
l
ou
t
pu
t
voltage
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15 0.15 V
voltage
VIC =25V
IOL =4
m
A
25°C 0.8 1 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2 1.2
Large signal differential
V25V
RL50 kه
25°C 80 100 80 170
AVD
L
arge-s
i
gna
l
diff
eren
ti
a
l
voltage am
p
lification
V
IC =
2
.
5
V
,
VO=1Vto4V
R
L =
50
kه
Full range 50 50 V/mV
VD
voltage
am lification
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550 550
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ri(c) Common-mode input
resistance 25°C 1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, P package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 240 240 Ω
CMRR
Common-mode VIC = 0 to 2.7 V, VO = 2.5 V, 25°C 70 83 70 83
dB
CMRR
rejection ratio
IC O
RS = 50 ΩFull range 70 70
dB
kSVR
Supply-voltage rejection VDD = 4.4 V to 16 V, 25°C 80 95 80 95
dB
k
SVR
ygj
ratio (∆VDD/∆VIO)
DD
VIC = VDD/2, No load Full range 80 80
dB
IDD
Su
pp
ly current
VO=25V
No load
25°C 400 500 400 500
µA
I
DD
Supply
current
V
O =
2
.
5
V
,
No
load
Full range 500 500 µ
A
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
‡Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
23
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262Q/M operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER TEST CONDITIONS T
A
†TLC2262Q,
TLC2262M TLC2262AQ,
TLC2262AM UNIT
A
MIN TYP MAX MIN TYP MAX
Slew rate at unity
VO=05Vto35V
RL50 kه
25°C0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
0
.
5
V
to
3
.
5
V
,
CL
=
100
p
F
‡
R
L =
50
kه
,Full
025
025
V/µs
gain
CL
=
100
F‡
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 40 40
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA√Hz
THD+N
Total harmonic
distortion
p
lus
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017% 0.017%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03% 0.03%
Gain-bandwidth f = 50 kHz
,
R
L
= 50 kΩ
‡,
25
°
C
082
082
MHz
product
f
50
kHz,
CL = 100 pF‡
RL
50
kΩ,
25°C
0
.
82
0
.
82
MHz
BOM
Maximum output- V
O(PP)
= 2 V, A
V
= 1,
25°C
185
185
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kه,
V,
CL = 100 pF‡
25°C
185
185
kHz
AV
=–
1,
To 0 1%
64
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25°C
6
.
4
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
14
.
1
φmPhase margin at
unity gain R
L
= 50 kΩ
‡
, C
L
= 100 pF
‡
25°C 56°56°
Gain margin
L,
L
25°C11 11 dB
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
24 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262Q/M electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise noted)
PARAMETER TEST CONDITIONS T
A
†TLC2262Q,
TLC2262M TLC2262AQ,
TLC2262AM UNIT
A
MIN TYP MAX MIN TYP MAX
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO Temperature coefficient of
input offset voltage Full range 5 5 µV/°C
Input offset voltage long-
term drift (see Note 4) VIC = 0,
RS = 50 ΩVO = 0, 25°C0.003 0.003 µV/mo
IIO
In
p
ut offset current
25°C 0.5 0.5 p
A
I
IO
Input
offset
current
125°C 800 800
pA
IIB
In
p
ut bias current
25°C 1 1 p
A
I
IB
Input
bias
current
125°C 800 800
pA
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
25°C–5
to 4 –5.3
to 4 –5
to 4 –5.3
to 4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range –5
to 3.5 –5
to 3.5
V
IO = –20 µA 25°C 4.99 4.99
Maximum positive peak
IO= 100 µA
25°C 4.85 4.94 4.85 4.94
VOM+
M
ax
i
mum pos
iti
ve pea
k
out
p
ut voltage
I
O = –
100
µ
A
Full range 4.82 4.82 V
out ut
voltage
IO= 400 µA
25°C 4.7 4.85 4.7 4.85
I
O = –
400
µ
A
Full range 4.5 4.5
VIC = 0, IO = 50 µA 25°C–4.99 –4.99
Maximum negative peak
VIC =0
IO= 500 µA
25°C–4.85 –4.91 –4.85 –4.91
VOM–
M
ax
i
mum nega
ti
ve pea
k
out
p
ut voltage
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85 –4.85 V
out ut
voltage
VIC =0
IO=4
m
A
25°C–4–4.3 –4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8 –3.8
Large signal differential
RL=50kΩ
25°C 80 200 80 200
AVD
L
arge-s
i
gna
l
diff
eren
ti
a
l
voltage am
p
lification
VO = ±4 V
R
L =
50
kΩ
Full range 50 50 V/mV
voltage
am lification
RL = 1 MΩ25°C 1000 1000
ri(d) Differential input
resistance 25°C1012 1012 Ω
ri(c) Common-mode input
resistance 25°C1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, P package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 220 220 Ω
CMRR
Common-mode VIC = –5 V to 2.7 V, 25°C 75 88 75 88
dB
CMRR
rejection ratio
IC
VO = 0, RS = 50 ΩFull range 75 75
dB
kSVR
Supply-voltage rejection VDD = 4.4 V to 16 V, 25°C 80 95 80 95
dB
k
SVR
ygj
ratio (∆VDD± /∆VIO)
DD
VIC = VDD/2, No load Full range 80 80
dB
IDD
Su
pp
ly current
VO=0
No load
25°C 425 500 425 500
µA
I
DD
Supply
current
V
O =
0
,
No
load
Full range 500 500 µ
A
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
25
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2262Q/M operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER TEST CONDITIONS T
A
†TLC2262Q,
TLC2262M TLC2262AQ,
TLC2262AM UNIT
A
MIN TYP MAX MIN TYP MAX
Slew rate at unity
VO=±2V
RL=50kΩ
25°C 0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
±2
V
,
CL
=
100
p
F
R
L =
50
kΩ
,Full
025
025
V/µs
gain
CL
=
100
F
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 43 43
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.8 0.8
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA√Hz
THD+N
Total harmonic
distortion
p
lus
VO = ±2.3 V,
RL50 kΩ
AV = 1
25°C
0.014% 0.014%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
R
L =
50
kΩ
,
f = 20 kHz AV = 10
25°C
0.024% 0.024%
Gain-bandwidth f =10 kHz, R
L
= 50 kΩ,
25
°
C
073
073
MHz
product
,
CL = 100 pF
L,
25°C
0
.
73
0
.
73
MHz
BOM
Maximum output- V
O(PP)
= 4.6 V, A
V
= 1,
25°C
85
85
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kΩ,
V,
CL = 100 pF
25°C
85
85
kHz
AV
=–
1,
To 0 1%
71
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25°C
7
.
1
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
16
.
5
φmPhase margin at
unity gain RL = 50 kΩ, CL = 100 pF 25°C 57°57°
Gain margin
L
L
25°C11 11 dB
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
26 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264Q/M electrical characteristics at specified free-air temperature, VDD = 5 V (unless
otherwise noted)
PARAMETER TEST CONDITIONS T
A†
TLC2264Q,
TLC2264M TLC2264AQ,
TLC2264AM UNIT
A
MIN TYP MAX MIN TYP MAX
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO Temperature coefficient
of input offset voltage Full range 2 2 µV/°C
Input offset voltage
long-term drift
(see Note 4)
VDD± = ±2.5 V,
VO = 0, VIC = 0,
RS = 50 Ω25°C0.003 0.003 µV/mo
IIO
In
p
ut offset current
25°C 0.5 0.5 p
A
I
IO
Input
offset
current
125°C 800 800
pA
IIB
In
p
ut bias current
25°C 1 1 p
A
I
IB
Input
bias
current
125°C 800 800
pA
VICR
Common-mode input
RS=50Ω
|VIO|≤5mV
25°C0
to 4 –0.3
to 4.2 0
to 4 –0.3
to 4.2
V
V
ICR voltage range
R
S =
50
Ω
,
|V
IO
|
≤5
mV
Full range 0
to 3.5 0
to 3.5
V
IOH = –20 µA 25°C 4.99 4.99
IOH = 100 µA
25°C 4.85 4.94 4.85 4.94
VOH High-level output voltage
I
OH = –
100
µ
A
Full range 4.82 4.82 V
IOH = 400 µA
25°C 4.7 4.85 4.7 4.85
I
OH = –
400
µ
A
Full range 4.5 4.5
VIC = 2.5 V, IOL = 50 µA 25°C 0.01 0.01
VIC =25V
IOL = 500 µA
25°C 0.09 0.15 0.09 0.15
VOL Low-level output voltage
V
IC =
2
.
5
V
,
I
OL =
500
µ
A
Full range 0.15 0.15 V
VIC =25V
IOL =4
m
A
25°C 0.8 1 0.7 1
V
IC =
2
.
5
V
,
I
OL =
4
m
A
Full range 1.2 1.2
Large signal differential
V25V
RL50 kه
25°C 80 100 80 170
AVD
L
arge-s
i
gna
l
diff
eren
ti
a
l
voltage am
p
lification
V
IC =
2
.
5
V
,
VO=1Vto4V
R
L =
50
kه
Full range 50 50 V/mV
VD
voltage
am lification
VO
=
1
V
to
4
V
RL = 1 MΩ‡25°C 550 550
ri(d) Differential input
resistance 25°C 1012 1012 Ω
ri(c) Common-mode input
resistance 25°C 1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, N package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 240 240 Ω
CMRR
Common-mode rejection VIC = 0 to 2.7 V, VO = 2.5 V, 25°C 70 83 70 83
dB
CMRR
j
ratio
IC
RS = 50 Ω
O
Full range 70 70
dB
kSVR Supply-voltage rejection
ratio (∆VDD/∆VIO)VDD = 4.4 V to 16 V, 25°C 80 95 80 95 dB
IDD
Suppl
y
current
VO=25V
No load
25°C 0.8 1 0.8 1
mA
I
DD
y
(four amplifiers)
V
O =
2
.
5
V
,
No
load
Full range 1 1
mA
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
‡Referenced to 2.5 V
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
27
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264Q/M operating characteristics at specified free-air temperature, VDD = 5 V
PARAMETER TEST CONDITIONS T
A†
TLC2264Q,
TLC2264M TLC2264AQ,
TLC2264AM UNIT
A
MIN TYP MAX MIN TYP MAX
Slew rate at unity
VO=05Vto35V
R50kه
25°C0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
0
.
5
V
to
3
.
5
V
,
CL
=
100
p
F
‡
R
L =
50
kه
,Full
025
025
V/µs
gain
CL
=
100
F‡
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 40 40
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.7 0.7
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA/√Hz
THD+N
Total harmonic
distortion
p
lus
VO = 0.5 V to 2.5 V,
f 20 kHz
AV = 1
25°C
0.017% 0.017%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
f
=
20
kH
z,
RL = 50 kهAV = 10
25°C
0.03% 0.03%
Gain-bandwidth f = 50 kHz
,
R
L
= 50 kΩ
‡,
25
°
C
071
071
MHz
product
f
50
kHz,
CL = 100 pF‡
RL
50
kΩ,
25°C
0
.
71
0
.
71
MHz
BOM
Maximum output- V
O(PP)
= 2 V, A
V
= 1,
25°C
185
185
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kه,
V,
CL = 100 pF‡
25°C
185
185
kHz
AV
=–
1,
To 0 1%
64
64
t
Settling time
AV
=
1
,
Step = 0.5 V to 2.5 V,
To
0
.
1%
25°C
6
.
4
6
.
4
µs
t
s
Settling
time
,
RL = 50 kه,
‡
To 0 01%
25°C
14 1
14 1
µ
s
L
CL = 100 pF‡
To
0
.
01%
14
.
1
14
.
1
φmPhase margin at
unity gain R
L
= 50 kΩ
‡
, C
L
= 100 pF
‡
25°C 56°56°
Gain margin
L,
L
25°C11 11 dB
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
‡Referenced to 2.5 V
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
28 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264Q/M electrical characteristics at specified free-air temperature, VDD± = ±5 V (unless
otherwise noted)
PARAMETER TEST CONDITIONS T
A†
TLC2264Q,
TLC2264M TLC2264AQ,
TLC2264AM UNIT
A
MIN TYP MAX MIN TYP MAX
VIO
In
p
ut offset voltage
25°C 300 2500 300 950
µV
V
IO
Input
offset
voltage
Full range 3000 1500 µ
V
αVIO
Temperature coefficient of
Full range
2
2
µV/°C
αVIO input offset voltage
Full
range
2
2
µ
V/°C
Input offset voltage
long-term drift (see Note 4) VIC = 0,
RS = 50 ΩVO = 0, 25°C0.003 0.003 µV/mo
IIO
In
p
ut offset current
25°C 0.5 0.5 p
A
I
IO
Input
offset
current
125°C 800 800
pA
IIB
In
p
ut bias current
25°C 1 1 p
A
I
IB
Input
bias
current
125°C 800 800
pA
–5
–53
–5
–53
25°C–
5
to 4
–
5
.
3
to 4 2
–
5
to 4
–
5
.
3
to 4 2
VICR
Common-mode input R
S
= 50 Ω,
25 C
t
o
4
t
o
4
.
2
t
o
4
t
o
4
.
2
V
V
ICR volta
g
e ran
g
e
S,
|
V
IO|
≤5 mV
–5
–5
V
voltage
range
|VIO|
≤5
mV
Full ran
g
e–
5
to 3 5
–
5
to 3 5
Full
range
t
o
3
.
5
t
o
3
.
5
IO = –20 µA 25°C 4.99 4.99
M i iti k
IO= 100 µA
25°C 4.85 4.94 4.85 4.94
VOM+ Maximum positive peak
out
p
ut voltage
I
O = –
100
µ
A
Full range 4.82 4.82 V
out ut
voltage
IO= 400 µA
25°C 4.7 4.85 4.7 4.85
I
O = –
400
µ
A
Full range 4.5 4.5
VIC = 0, IO = 50 µA 25°C–4.99 –4.99
M i ti k
VIC =0
IO= 500 µA
25°C–4.85 –4.91 –4.85 –4.91
VOM–Maximum negative peak
out
p
ut voltage
V
IC =
0
,
I
O =
500
µ
A
Full range –4.85 –4.85 V
out ut
voltage
VIC =0
IO=4
m
A
25°C–4–4.3 –4–4.3
V
IC =
0
,
I
O =
4
m
A
Full range –3.8 –3.8
L i l diff ti l
RL=50kΩ
25°C 80 200 80 200
AVD Large-signal dif ferential
voltage am
p
lification
VO = ±4 V
R
L =
50
kΩ
Full range 50 50 V/mV
voltage
am lification
RL = 1 MΩ25°C 1000 1000
ri(d) Differential input resistance 25°C1012 1012 Ω
ri(c) Common-mode input
resistance 25°C1012 1012 Ω
ci(c) Common-mode input
capacitance f = 10 kHz, N package 25°C 8 8 pF
zoClosed-loop output
impedance f = 100 kHz, AV = 10 25°C 220 220 Ω
CMRR
Common-mode VIC = –5 V to 2.7 V, 25°C 75 88 75 88
dB
CMRR
rejection ratio VO = 0, RS = 50 ΩFull range 75 75
dB
kSVR
Supply-volta
g
e rejection VDD± = ±2.2 V to ±8 V, 25°C 80 95 80 95
dB
k
SVR
ygj
ratio (∆VDD±/∆VIO)VIC = VDD/2, No load Full range 80 80
dB
IDD
Supply current
VO=0
No load
25°C 0.85 1 0.85 1
mA
I
DD
y
(four amplifiers)
V
O =
0
,
No
load
Full range 1 1
mA
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
NOTE 4: Typical values are based on the input offset voltage shift observed through 500 hours of operating life test at T A = 150°C extrapolated
to TA = 25°C using the Arrhenius equation and assuming an activation energy of 0.96 eV.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
29
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TLC2264Q/M operating characteristics at specified free-air temperature, VDD± = ±5 V
PARAMETER TEST CONDITIONS T
A†
TLC2264Q,
TLC2264M TLC2264AQ,
TLC2264AM UNIT
A
MIN TYP MAX MIN TYP MAX
Slew rate at unity
VO=±2V
RL=50kΩ
25°C 0.35 0.55 0.35 0.55
SR
Slew
rate
at
unity
gain
V
O =
±2
V
,
CL
=
100
p
F
R
L =
50
kΩ
,Full
025
025
V/µs
gain
CL
=
100
F
range
0
.
25
0
.
25
V
Equivalent input f = 10 Hz 25°C 43 43
nV/√Hz
V
n
q
noise voltage f = 1 kHz 25°C 12 12 n
V/√H
z
VN(PP)
Peak-to-peak
equivalent in
p
ut
f = 0.1 Hz to 1 Hz 25°C 0.8 0.8
µV
V
N(PP) equ
i
va
l
en
t
i
npu
t
noise voltage f = 0.1 Hz to 10 Hz 25°C 1.3 1.3 µ
V
InEquivalent input
noise current 25°C 0.6 0.6 fA/√Hz
THD+N
Total harmonic
distortion
p
lus
VO = ±2.3 V,
RL50 kΩ
AV = 1
25°C
0.014% 0.014%
THD
+
N
di
s
t
or
ti
on p
l
us
noise
R
L =
50
kΩ
,
f = 20 kHz AV = 10
25°C
0.024% 0.024%
Gain-bandwidth f =10 kHz, R
L
= 50 kΩ,
25
°
C
073
073
MHz
product
,
CL = 100 pF
L,
25°C
0
.
73
0
.
73
MHz
BOM
Maximum output- V
O(PP)
= 4.6 V, A
V
= 1,
25°C
70
70
kHz
B
OM swing bandwidth
O(PP) ,
RL = 50 kΩ,
V,
CL = 100 pF
25°C
70
70
kHz
AV
=–
1,
To 0 1%
71
71
t
Settling time
AV
=
1
,
Step = –2.3 V to 2.3 V,
To
0
.
1%
25°C
7
.
1
7
.
1
µs
t
s
Settling
time
,
RL = 50 kΩ,
To 0 01%
25°C
16 5
16 5
µ
s
L
CL = 100 pF
To
0
.
01%
16
.
5
16
.
5
φmPhase margin at
unity gain RL = 50 kΩ, CL = 100 pF 25°C 57°57°
Gain margin
L
L
25°C11 11 dB
†Full range is –40°C to 125°C for Q suf fix, – 55°C to 125°C for M suffix.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
30 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Table of Graphs
FIGURE
VIO Input of fset voltage Distribution
vs Common-mode input voltage 2 – 5
6, 7
αVIO Input offset voltage temperature coef ficient Distribution 8 – 11
IIB/IIO Input bias and input offset currents vs Free-air temperature 12
VIInput voltage range vs Supply voltage
vs Free-air temperature 13
14
VOH High-level output voltage vs High-level output current 15
VOL Low-level output voltage vs Low-level output current 16, 17
VOM+ Maximum positive output voltage vs Output current 18
VOM–Maximum negative output voltage vs Output current 19
VO(PP) Maximum peak-to-peak output voltage vs Frequency 20
IOS Short-circuit output current vs Supply voltage
vs Free-air temperature 21
22
VOOutput voltage vs Differential input voltage 23, 24
Differential gain vs Load resistance 25
AVD Large-signal dif ferential voltage amplification vs Frequency
vs Free-air temperature 26, 27
28, 29
zoOutput impedance vs Frequency 30, 31
CMRR Common-mode rejection ratio vs Frequency
vs Free-air temperature 32
33
kSVR Supply-voltage rejection ratio vs Frequency
vs Free-air temperature 34, 35
36
IDD Supply current vs Supply voltage
vs Free-air temperature 37, 38
39, 40
SR Slew rate vs Load capacitance
vs Free-air temperature 41
42
Inverting large-signal pulse response 43, 44
VO
Voltage-follower large-signal pulse response 45, 46
V
OInverting small-signal pulse response 47, 48
Voltage-follower small-signal pulse response 49, 50
VnEquivalent input noise voltage vs Frequency 51, 52
Noise voltage (referred to input) Over a 10-second period 53
Integrated noise voltage vs Frequency 54
THD + N Total harmonic distortion plus noise vs Frequency 55
Gain-bandwidth product vs Supply voltage
vs Free-air temperature 56
57
φmPhase margin vs Frequency
vs Load capacitance 26, 27
58
Gain margin vs Load capacitance 59
B1Unity-gain bandwidth vs Load capacitance 60
Overestimation of phase margin vs Load capacitance 61
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
31
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 2
Precentage of Amplifiers – %
DISTRIBUTION OF TLC2262
INPUT OFFSET VOLTAGE
VIO – Input Offset Voltage – mV
15
10
5
0
20
25
–1.6 –0.8 0 0.8 1.6
VDD± = ±2.5 V
TA = 25°C
1274 Amplifiers From 2 W afer Lots
Figure 3
Percentage of Amplifiers – %
DISTRIBUTION OF TLC2262
INPUT OFFSET VOLTAGE
VIO – Input Offset Voltage – mV
15
10
5
0
20
25
–1.6 –0.8 0 0.8 1.6
VDD± = ±5 V
TA = 25°C
1274 Amplifiers From 2 W afer Lots
Figure 4
12
8
4
0
Percentage of Amplifiers – %
16
DISTRIBUTION OF TLC2264
INPUT OFFSET VOLTAGE
20
–1.6 –0.8 0 0.8 1.6
VIO – Input Offset Voltage – mV
2272 Amplifiers From 2 W afer Lots
VDD±= ±2.5 V
TA = 25°C
Figure 5
12
8
4
0
Percentage of Amplifiers – %
16
DISTRIBUTION OF TLC2264
INPUT OFFSET VOLTAGE
20
–1.6 –0.8 0 0.8 1.6
2272 Amplifiers From 2 Wafer Lots
VDD±= ±5 V
TA = 25°C
VIO – Input Offset Voltage – mV
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
32 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 6
0
VIO – Input Offset Voltage – mV
0.5
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
1
–0.5
–1–1012345
ÁÁÁ
ÁÁÁ
VIO
VIC – Common-Mode Input Voltage – V
VDD = 5 V
RS = 50 Ω
TA = 25°C
†For curves where VDD = 5 V, all loads are referenced to 2.5 V. Figure 7
0
VIO – Input Offset Voltage – mV
0.5
INPUT OFFSET VOLTAGE
vs
COMMON-MODE INPUT VOLTAGE
1
–0.5
–1–6–5–4–3–2–10 1 2 3 4 5
ÁÁ
ÁÁ
ÁÁ
VIO
VIC – Common-Mode Input Voltage – V
VDD± = ±5 V
RS = 50 Ω
TA = 25°C
15
10
5
0
Percentage of Amplifiers – %
20
25
DISTRIBUTION OF TLC2262 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
30
–5–4–3–2–10 1 2 3 4 5
128 Amplifiers From 2 Wafer Lots
VDD± = ±2.5 V
P Package
TA = 25°C to 125°C
αVIO – Temperature Coefficient – µV/°C
Figure 8
15
10
5
0
Percentage of Amplifiers – %
20
25
DISTRIBUTION OF TLC2262 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
30
–5–4–3–2–10 1 2 3 4 5
αVIO – Temperature Coefficient – µV/°C
128 Amplifiers From 2 W afer Lots
VDD± = ±5 V
P Package
TA = 25°C to 125°C
Figure 9
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
33
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 10
Percentage of Amplifiers – %
DISTRIBUTION OF TLC2264 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
αVIO – Temperature Coefficient of
Input Offset Voltage – µV/°C
10
5
30
0
20
15
25
35
–5–4–3–2–10 1 2 3 4 5
128 Amplifiers From
2 W afer Lots
VDD± = ±2.5 V
N Package
TA = 25°C to 125°C
Percentage of Amplifiers – %
DISTRIBUTION OF TLC2264 INPUT OFFSET
VOLTAGE TEMPERATURE COEFFICIENT†
αVIO – Temperature Coefficient of
Input Offset Voltage – µV/°C
10
5
30
0
20
15
25
35
–5–4–3–2–10 1 2 3 4 5
128 Amplifiers From
2 W afer Lots
VDD± = ±5 V
N Package
TA = 25°C
to 125°C
Figure 11
0
50
100
150
200
250
300
350
400
450
25 45 65 85 105 125
Figure 12
IIB and IIO – Input Bias and Input Offset Currents – pA
INPUT BIAS AND INPUT OFFSET CURRENTS
†
vs
FREE-AIR TEMPERATURE
IIB
IIO
VDD± = ±2.5 V
VIC = 0 V
VO = 0
RS = 50 Ω
TA – Free-Air Temperature – °C
ÁÁ
ÁÁ
IIB IIO
Figure 13
0
2345
VI – Input Voltage Range – V
4
8
INPUT VOLTAGE RANGE
vs
SUPPLY VOLTAGE
10
678
6
2
–2
–4
–6
–8
–10
| VIO | ≤ 5 mV
RS = 50 Ω
TA = 25°C
VI
| VDD± | – Supply Voltage – V
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
34 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 14
5
2
1
0
VI – Input Voltage Range – V
3
4
INPUT VOLTAGE RANGE†‡
vs
FREE-AIR TEMPERATURE
5
–1
–75 –55 –35 –15 25 45 65 85 105 125
| VIO | ≤5 mV
VDD = 5 V
ÁÁ
ÁÁ
VI
TA – Free-Air Temperature – °C
Figure 15
VOH – High-Level Output Voltage – V
HIGH-LEVEL OUTPUT VOLTAGE†‡
vs
HIGH-LEVEL OUTPUT CURRENT
|IOH| – High-Level Output Current – µA
ÁÁ
ÁÁ
VOH
3
2
1
00 500 1000
4
5
6
1500 2000 3000 35002500
VDD = 5 V
TA = 125°C
TA = 25°C
TA = –55°C
TA = –40°C
Figure 16
0.6
0.4
0.2
00123
VOL – Low-Level Output Voltage – V
0.8
1
LOW-LEVEL OUTPUT VOLTAGE ‡
vs
LOW-LEVEL OUTPUT CURRENT
1.2
45
VIC = 0 VIC = 1.25 V
VIC = 2.5 V
VDD = 5 V
TA = 25°C
ÁÁ
ÁÁ
ÁÁ
VOL
IOL – Low-Level Output Current – mA
Figure 17
0.8
0.4
0.2
00123
VOL – Low-Level Output Voltage – V
1
1.2
LOW-LEVEL OUTPUT VOLTAGE †‡
vs
LOW-LEVEL OUTPUT CURRENT
1.4
456
0.6
IOL – Low-Level Output Current – mA
TA = 125°C
TA = 25°C
TA = –55°C
VDD = 5 V
VIC = 2.5 V
ÁÁ
ÁÁ
VOL
TA = –40°C
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
35
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 18
VOM + – Maximum Positive Output Voltage – V
MAXIMUM POSITIVE OUTPUT VOLTAGE†
vs
OUTPUT CURRENT
ÁÁ
ÁÁ
ÁÁ
VOM +
| IO | – Output Current – µA
3
2
1
00 500 1000
4
5
6
1500 2000 3000 35002500
VDD± = ±5 V
TA = 125°C
TA = 25°C
TA = –55°C
TA = –40°C
Figure 19
01 2
VOM – – Maximum Negative Output Voltage – V
MAXIMUM NEGATIVE OUTPUT VOLTAGE†
vs
OUTPUT CURRENT
3456
–3.8
–4
–4.2
–4.4
–4.6
–4.8
–5
VDD± = ±5 V
VIC = 0
TA = 125°C
TA = 25°C
TA = –55°C
IO – Output Current – mA
ÁÁ
ÁÁ
ÁÁ
ÁÁ
VOM –
TA = –40°C
6
5
3
1
0
10
4
VO(PP) – Maximum Peak-to-Peak Output Voltage – V
8
7
9
f – Frequency – Hz
MAXIMUM PEAK-TO-PEAK OUTPUT VOLTAGE†‡
vs
FREQUENCY
2
ÁÁ
ÁÁ
ÁÁ
VO(PP)
103104105106
VDD = 5 V
VDD± = ±5 V RL = 10 kΩ
TA = 25°C
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V .
Figure 20 Figure 21
IOS – Short-Circuit Output Current – mA
SHORT-CIRCUIT OUTPUT CURRENT
vs
SUPPLY VOLTAGE
IOS
| VDD± | – Supply Voltage – V
2345678
12
10
8
6
4
2
0
–2
–4
VID = –100 mV
VO = 0
TA = 25°C
VID = 100 mV
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
36 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 22
IOS – Short-Circuit Output Current – mA
SHORT-CIRCUIT OUTPUT CURRENT†
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
IOS
–75
13
12
11
10
9
8
7
1
0
–1
–2
–3
–4–50 –25 0 25 50 75 100 125
VO = 0
VDD± = ±5 V
VID = –100 mV
VID = 100 mV
Figure 23
3
2
1
00 250
4
5
OUTPUT VOLTAGE‡
vs
DIFFERENTIAL INPUT VOLTAGE
500 750 1000
VID – Differential Input Voltage – µV
– Output Voltage – V
VO
–1000 –750 –250–500
VDD = 5 V
RL = 50 kΩ
VIC = 2.5 V
TA = 25°C
Figure 24
1
–1
–3
–50 250
3
5
OUTPUT VOLTAGE
vs
DIFFERENTIAL INPUT VOLTAGE
500 750 1000
VID – Differential Input Voltage – µV
VDD± = ±5 V
VIC = 0 V
RL = 50 kΩ
TA = 25°C
– Output Voltage – V
VO
–1000 –750 –250–500 1
10
Differential Gain – V/ mV
DIFFERENTIAL GAIN‡
vs
LOAD RESISTANCE
RL – Load Resistance – kΩ
102
103
104
VO(PP) = 2 V
TA = 25°C
VDD = 5 V
103104105106
VDD± = ±5 V
Figure 25
†
Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
37
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
om – Phase Margin
φm
20
f – Frequency – Hz
80
60
40
0
–20
–40
103104105106107
180°
135°
90°
45°
0°
–45°
–90°
LARGE-SIGNAL DIFFERENTIAL VOLTAGE†
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
AVD – Large-Signal Differential
ÁÁ
ÁÁ
ÁÁ
AVD
V oltage Amplification – dB
†For curves where VDD = 5 V, all loads are referenced to 2.5 V.
Gain
Phase Margin
VDD = 5 V
CL= 100 pF
TA = 25°C
Figure 26
om – Phase Margin
φm
20
f – Frequency – Hz
LARGE-SIGNAL DIFFERENTIAL VOLTAGE
AMPLIFICATION AND PHASE MARGIN
vs
FREQUENCY
80
60
40
0
–20
–40
103104105106107
180°
135°
90°
45°
0°
–45°
–90°
AVD – Large-Signal Differential
ÁÁ
ÁÁ
ÁÁ
AVD
V oltage Amplification – dB
Gain
Phase Margin
VDD± = ±5 V
CL = 100 pF
TA = 25°C
Figure 27
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
38 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION†‡
vs
FREE-AIR TEMPERATURE
–75 –50 –25 0 25 50 75 100 125
TA – Free-Air Temperature – °C
AVD – Large-Signal Differential
ÁÁ
ÁÁ
AVD
V oltage Amplification – V/mV
VDD = 5 V
VIC = 2.5 V
VO = 1 V to 4 V
RL = 50 kΩ
RL = 1 MΩ
RL = 10 kΩ
104
103
102
101
Figure 28 Figure 29
–75 –50 –25 0 25 50 75 100 125
TA – Free-Air Temperature – °C
LARGE-SIGNAL DIFFERENTIAL
VOLTAGE AMPLIFICATION†
vs
FREE-AIR TEMPERATURE
AVD – Large-Signal Differential
ÁÁ
ÁÁ
AVD
V oltage Amplification – V/mV
VDD± = ±5 V
VIC = 0 V
VO = ±4 V
RL = 1 MΩ
RL = 50 kΩ
RL = 10 kΩ
104
103
102
101
10
1
0.1
1000
100
zo – Output Impedance – 0
OUTPUT IMPEDANCE‡
vs
FREQUENCY
f – Frequency – Hz
102103104105106
Ω
zo
VDD = 5 V
TA = 25°C
AV = 100
AV = 10
AV = 1
Figure 30
10
1
0.1
1000
100
OUTPUT IMPEDANCE
vs
FREQUENCY
f – Frequency – Hz
102103104105106
VDD± = ±5 V
TA = 25°C
AV = 100
AV = 10
AV = 1
zo – Output Impedance – 0
Ω
zo
Figure 31
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
39
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 32
60
40
20
0
80
f – Frequency – Hz
COMMON-MODE REJECTION RATIO†
vs
FREQUENCY
100
101102103104105106
VDD± = ±5 V
VDD = 5 V
CMRR – Common-Mode Rejection Ratio – dB
Figure 33
86
84
82
80
88
COMMON-MODE REJECTION RATIO†‡
vs
FREE-AIR TEMPERATURE
90
–75 –50 –25 0 25 50 75 100
VDD± = ±5 V
VDD = 5 V
TA – Free-Air Temperature – °C
CMRR – Common-Mode Rejection Ratio – dB
125
f – Frequency – Hz
SUPPLY-VOLTAGE REJECTION RATIO†
vs
FREQUENCY
100
80
60
40
20
0
–20
101102103104105106
kSVR+
kSVR–
VDD = 5 V
TA = 25°C
KSVR – Supply-Voltage Rejection Ratio – dB
ÁÁ
ÁÁ
ÁÁ
kSVR
Figure 34
KSVR – Supply-Voltage Rejection Ratio – dB
f – Frequency – Hz
SUPPLY-VOLTAGE REJECTION RATIO
vs
FREQUENCY
100
80
60
40
20
0
–20
101102103104105106
ÁÁ
ÁÁ
ÁÁ
kSVR
kSVR+
kSVR–
VDD± = ±5 V
TA = 25°C
Figure 35
‡Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
†For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
40 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 36
100
95
90
KSVR – Supply-Voltage Rejection Ratio – dB
105
SUPPLY-VOLTAGE REJECTION RATIO†
vs
FREE-AIR TEMPERATURE
110
–50 –25 0 25 50 75 100 125
ÁÁ
ÁÁ
ÁÁ
kSVR
TA – Free-Air Temperature – °C
VO = 0
VDD± = ±2.2 V to ±8 V
–75
Figure 37
300
200
100
0012345
IDD – Supply Current – uA
400
500
600
678
| VDD± | – Supply Voltage – V
TA = 25°C
TA = 125°C
TA = –55°C
VO = 0
No Load
ÁÁ
ÁÁ
IDD Aµ
TA = 40°C
TLC2262
SUPPLY CURRENT†
vs
SUPPLY VOLTAGE
Figure 38
600
400
200
0012345
IDD – Supply Current – uA
800
1000
1200
678
| VDD± | – Supply Voltage – V
TA = 25°C
TA = 125°C
TA = –55°C
VO = 0
No Load
ÁÁ
ÁÁ
ÁÁ
IDD Aµ
TA = 40°C
TLC2264
SUPPLY CURRENT†
vs
SUPPLY VOLTAGE
Figure 39
300
200
100
0
400
500
600
–75 –50 –25 0 25 50 75 100
IDD – Supply Current – uA
ÁÁ
ÁÁ
ÁÁ
IDD Aµ
TA – Free-Air Temperature – °C
VDD± = ±5 V
VO = 0
VDD = 5 V
VO = 2.5 V
125
TLC2262
SUPPLY CURRENT†‡
vs
FREE-AIR TEMPERATURE
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
41
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 40
600
400
200
0
800
1000
1200
–50 –25 0 25 50 75 100 125
IDD – Supply Current – uA
ÁÁ
ÁÁ
IDD Aµ
TA – Free-Air Temperature – °C
VDD± = ±5 V
VO = 0
VDD = 5 V
VO = 2.5 V
–75
TLC2264
SUPPLY CURRENT†‡
vs
FREE-AIR TEMPERATURE
0.8
0.4
0.2
0
1
0.6
SR – Slew Rate – v/us
SLEW RATE‡
vs
LOAD CAPACITANCE
sµ
V/
CL – Load Capacitance – pF
101102103104
SR+
VDD = 5 V
AV = –1
TA = 25°C
SR–
Figure 41
Figure 42
0.6
0.4
0.2
0
0.8
1
SLEW RATE†‡
vs
FREE-AIR TEMPERATURE
1.2
–75 –50 –25 0 25 50 75 100
TA – Free-Air Temperature – °C
VDD = 5 V
RL = 50 kΩ
CL = 100 pF
AV = 1
SR – Slew Rate – v/ussµ
V/
125
SR+
SR–
Figure 43
2
1
00 2 4 6 8 10 12
VO – Output Voltage – V
3
4
INVERTING LARGE-SIGNAL PULSE
RESPONSE‡
5
14 16 18 20
VO
VDD = 5 V
RL = 50 kΩ
CL = 100 pF
AV = –1
TA = 25°C
t – Time – µs
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
42 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 44
0
4
024681012
2
1
3
5
14 16 18 20
VDD± = ±5 V
RL = 50 kΩ
CL = 100 pF
AV = –1
TA = 25°C
t – Time – µs
VO – Output Voltage – V
VO
–1
–2
–3
–4
–5
INVERTING LARGE-SIGNAL PULSE
RESPONSE
Figure 45
2
1
00 2 4 6 8 10 12
3
4
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE†
5
14 16 18 20
VDD = 5 V
RL = 50 kΩ
CL = 100 pF
AV = 1
TA = 25°C
t – Time – µs
VO – Output Voltage – V
VO
0
4
024681012
2
1
3
5
14 16 18 20
VDD±= ±5 V
RL = 50 kΩ
CL = 100 pF
AV = 1
TA = 25°C
t – Time – µs
VO – Output Voltage – V
VO
–1
–2
–3
–4
–5
VOLTAGE-FOLLOWER LARGE-SIGNAL
PULSE RESPONSE
Figure 46 Figure 47
2.5
2.45
2.40 2 4 6 8 10 12
2.55
2.6
INVERTING SMALL-SIGNAL
PULSE RESPONSE†
2.65
14 16 18 20
VDD = 5 V
RL = 50 kΩ
CL = 100 pF
AV = –1
TA = 25°C
VO – Output Voltage – V
VO
t – Time – µs
†For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
43
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 48
0
024681012
INVERTING SMALL-SIGNAL
PULSE RESPONSE
100
14 16 18 20
50
–50
–100
VDD± = ±5 V
RL = 50 kΩ
CL = 100 pF
AV = –1
TA = 25°C
t – Time – µs
VO – Output Voltage – mV
VO
Figure 49
2.5
2.45
2.40 2 4 6 8 10 12
2.55
2.6
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE†
2.65
14 16 18 20
VDD = 5 V
RL = 50 kΩ
CL = 100 pF
AV = 1
TA = 25°C
VO – Output Voltage – V
VO
t – Time – µs
Figure 50
0 2 4 6 8 10 12
VOLTAGE-FOLLOWER SMALL-SIGNAL
PULSE RESPONSE
14 16 18 20
VDD± = ±5 V
RL = 50 kΩ
CL = 100 pF
AV = 1
TA = 25°C
VO – Output Voltage – V
VO
t – Time – µs
–100
–50
0
50
100
40
20
10
0
60
30
VN – Equivalent Input Noise Voltage – nv//Hz
50
f – Frequency – Hz
EQUIVALENT INPUT NOISE VOLTAGE†
vs
FREQUENCY
101102103104
nV/ Hz
Vn
VDD = 5 V
RS = 20 Ω
TA = 25°C
Figure 51
†For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
44 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
40
20
10
0
60
30
50
101102103104
EQUIVALENT INPUT NOISE VOLTAGE
vs
FREQUENCY
f – Frequency – Hz
VN – Equivalent Input Noise Voltage – nv//Hz
nV/ Hz
Vn
VDD± = ±5 V
RS = 20 Ω
TA = 25°C
Figure 52
0246
Noise Voltage – nV
0
750
t – Time – s
EQUIVALENT INPUT NOISE VOLTAGE OVER
A 10-SECOND PERIOD†
1000
810
500
–250
–500
–750
–1000
250
VDD = 5 V
f = 0.1 Hz to 10 Hz
TA = 25°C
Figure 53
0.1
Integrated Noise Voltage –
f – Frequency – Hz
INTEGRATED NOISE VOLTAGE
vs
FREQUENCY
1
10
100
100101102103104105
Calculated Using Ideal Pass-Band Filter
Low Frequency = 1 Hz
TA = 25°C
Vµ
Figure 54
0.01
0.1
THD + N – Total Harmonic Distortion Plus Noise – %
f – Frequency – Hz
TOTAL HARMONIC DISTORTION PLUS NOISE†
vs
FREQUENCY
0.001
101102103104105
AV = 100
AV = 10
AV = 1
VDD = 5 V
RL = 50 kΩ
TA = 25°C
Figure 55
†For curves where VDD = 5 V, all loads are referenced to 2.5 V.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
45
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
Figure 56
Gain-Bandwidth Product – kHz
GAIN-BANDWIDTH PRODUCT
vs
SUPPLY VOLTAGE
| VDD ±| – Supply Voltage – V
860
820
780
740 0235
900
940
78146
f = 10 kHz
RL = 50 kΩ
CL = 100 pF
TA = 25°C
Figure 57
Gain-Bandwidth Product – kHz
GAIN-BANDWIDTH PRODUCT†‡
vs
FREE-AIR TEMPERATURE
TA – Free-Air Temperature – °C
800
600
400
1000
1200
–75 –25 0 25 50 75 100 125
VDD = 5 V
f = 10 kHz
CL = 100 pF
–50
Figure 58
om – Phase Margin
PHASE MARGIN
vs
LOAD CAPACITANCE
101102103104
CL – Load Capacitance – pF
m
φ
75°
60°
45°
30°
15°
0°
Rnull = 50 Ω
Rnull = 100 Ω
Rnull = 0
Rnull = 10 Ω
TA = 25°C
50 kΩ
50 kΩ
VDD–
VDD+ Rnull
CL
VI+
–
Rnull = 20 Ω
20
10
5
0
15
Gain Margin – dB
GAIN MARGIN
vs
LOAD CAPACITANCE
101102103104
CL – Load Capacitance – pF
Rnull = 20 Ω
Rnull = 0
Rnull = 100 Ω
TA = 25°C
Rnull = 50 Ω
Rnull = 10 Ω
Figure 59
†Data at high and low temperatures are applicable only within the rated operating free-air temperature ranges of the various devices.
‡For curves where VDD = 5 V, all loads are referenced to 2.5 V.
†See application information
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
46 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
TYPICAL CHARACTERISTICS
600
400
200
– Unity-Gain Bandwidth – kHz
800
UNITY-GAIN BANDWIDTH†
vs
LOAD CAPACITANCE
1000
101102103104
CL – Load Capacitance – pF
ÁÁ
ÁÁ
B1
TA = 25°C
Figure 60
Overestimation of Phase Margin
OVERESTIMATION OF PHASE MARGIN†
vs
LOAD CAPACITANCE
14°
12°
10°
6°
4°
0
2°
101102103104
CL – Load Capacitance – pF
Rnull = 100 Ω
Rnull = 50 Ω
Rnull = 10 Ω
TA = 25°C
Rnull = 20 Ω
8°
Figure 61
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
47
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
driving large capacitive loads
The TLC226x is designed to drive larger capacitive loads than most CMOS operational amplifiers. Figure 58
and Figure 59 illustrate its ability to drive loads greater than 400 pF while maintaining good gain and phase
margins (Rnull = 0).
A smaller series resistor (Rnull) at the output of the device (see Figure 62) improves the gain and phase margins
when driving large capacitive loads. Figure 58 and Figure 59 show the effects of adding series resistances of
10 Ω, 20 Ω, 50 Ω, and 100 Ω. The addition of this series resistor has two effects: the first is that it adds a zero
to the transfer function and the second is that it reduces the frequency of the pole associated with the output
load in the transfer function.
The zero introduced to the transfer function is equal to the series resistance times the load capacitance. To
calculate the improvement in phase margin, equation 1 can be used.
∆Θm1
+
tan–1
ǒ
2×π×UGBW×Rnull ×CL
Ǔ
Where :
(1)
∆Θm1
+
improvementinphasemargin
UGBW
+
unity-gainbandwidthfrequency
Rnull
+
outputseriesresistance
CL
+
loadcapacitance
The unity-gain bandwidth (UGBW) frequency decreases as the capacitive load increases (see Figure 60). To
use equation 1, UGBW must be approximated from Figure 60.
Using equation 1 alone overestimates the improvement in phase margin, as illustrated in Figure 61. The
overestimation is caused by the decrease in the frequency of the pole associated with the load, thus providing
additional phase shift and reducing the overall improvement in phase margin. The pole associated with the load
is reduced by the factor calculated in equation 2.
F
+
1
1
)
gm×Rnull
Where :
(2)
F
+
factorreducingfrequencyofpole
gm
+
small-signaloutputtransconductance(typically 4.83 ×10–3mhos)
Rnull
+
output seriesresistance
For the TLC226x, the pole associated with the load is typically 7 MHz with 100-pF load capacitance. This value
varies inversely with CL: at CL = 10 pF, use 70 MHz, at CL = 1000 pF, use 700 kHz, and so on.
Reducing the pole associated with the load introduces phase shift, thereby reducing phase margin. This results
in an error in the increase in phase margin expected by considering the zero alone (equation 1). Equation 3
approximates the reduction in phase margin due to the movement of the pole associated with the load. The
result of this equation can be subtracted from the result of the equation in equation 1 to better approximate the
improvement in phase margin.
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
48 POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
driving large capacitive loads (continued)
∆Θm2
+
tan–1
ȧ
ȱ
Ȳ
UGBW
ǒ
F×P2
Ǔȧ
ȳ
ȴ
–tan–1
ǒ
UGBW
P2
Ǔ
Where :
(3)
∆Θm2
+
reduction in phase margin
UGBW
+
unity-gain bandwidth frequency
F
+
factor from equation 2
P2
+
unadjusted pole (70 MHz@10 pF, 7 MHz@100 pF, etc.)
Using these equations with Figure 60 and Figure 61 enables the designer to choose the appropriate output
series resistance to optimize the design of circuits driving large capacitive loads.
50 kΩ
50 kΩ
VDD–/GND
VDD+
Rnull
CL
VI+
–
Figure 62. Series-Resistance Circuit
TLC226x, TLC226xA
Advanced LinCMOS RAIL-TO-RAIL
OPERATIONAL AMPLIFIERS
SLOS177D – FEBRUARY 1997 – REVISED MARCH 2001
49
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
APPLICATION INFORMATION
macromodel information
Macromodel information provided was derived using Microsim Parts, the model generation software used
with Microsim PSpice. The Boyle macromodel (see Note 5) and subcircuit in Figure 63 are generated using
the TLC226x typical electrical and operating characteristics at TA = 25°C. Using this information, output
simulations of the following key parameters can be generated to a tolerance of 20% (in most cases):
D
Maximum positive output voltage swing
D
Maximum negative output voltage swing
D
Slew rate
D
Quiescent power dissipation
D
Input bias current
D
Open-loop voltage amplification
D
Unity-gain frequency
D
Common-mode rejection ratio
D
Phase margin
D
DC output resistance
D
AC output resistance
D
Short-circuit output current limit
NOTE 5: G. R. Boyle, B. M. Cohn, D. O. Pederson, and J. E. Solomon, “Macromodeling of Integrated Circuit Operational Amplifiers,” IEEE Journal
of Solid-State Circuits, SC-9, 353 (1974).
OUT
+
–
+
–
+
–
+
–
+
–
+
–
+
–+
–
+–
.SUBCKT TLC226x 1 2 3 4 5
C1 11 12 3.560E–12
C2 6 7 15.00E–12
DC 5 53 DX
DE 54 5 DX
DLP 90 91 DX
DLN 92 90 DX
DP 43DX
EGND 99 0 POLY (2) (3,0) (4,0) 0 .5 .5
FB 7 99 POLY (5) VB VC VE VLP
+ VLN 0 21.04E6 –30E6 30E6 30E6 –30E6
GA 6 0 1 1 12 47.12E–6
GCM 0 6 10 99 4.9E–9
ISS 3 10 DC 8.250E–6
HLIM 90 0 VLIM 1K
J1 11 2 10 JX
J2 12 1 10 JX
R2 6 9 100.0E3
RD1 60 11 21.22E3
RD2 60 12 21.22E3
R01 8 5 120
R02 7 99 120
RP 3 4 26.04E3
RSS 10 99 24.24E6
VAD 60 4 –.6
VB 9 0 DC 0
VC 3 53 DC .65
VE 54 4 DC .65
VLIM 7 8 DC 0
VLP 91 0 DC 1.4
VLN 0 92 DC 9.4
.MODEL DX D (IS=800.0E–18)
.MODEL JX PJF (IS=500.0E–15 BETA=281E–6
+ VTO=–.065)
.ENDS
VCC+
RP
IN –2
IN+ 1
VCC–
VAD
RD1
11
J1 J2
10
RSS ISS
3
12
RD2
60
VE
54 DE
DP
VC
DC
4
C1
53
R2 6
9
EGND
VB
FB
C2
GCM GA VLIM
8
5RO1
RO2
HLIM
90 DLP
91
DLN
92
VLNVLP
99
7
Figure 63. Boyle Macromodel and Subcircuit
PSpice and Parts are trademarks of MicroSim Corporation.
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 1
PACKAGING INFORMATION
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
5962-9469201Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9469201QHA ACTIVE CFP U 10 1 TBD Call TI Call TI
5962-9469201QPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-9469202Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9469202QCA ACTIVE CDIP J 14 1 TBD Call TI Call TI
5962-9469202QDA ACTIVE CFP W 14 1 TBD Call TI Call TI
5962-9469203Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9469203QHA ACTIVE CFP U 10 1 TBD Call TI Call TI
5962-9469203QPA ACTIVE CDIP JG 8 1 TBD Call TI Call TI
5962-9469204Q2A ACTIVE LCCC FK 20 1 TBD Call TI Call TI
5962-9469204QCA ACTIVE CDIP J 14 1 TBD Call TI Call TI
5962-9469204QDA ACTIVE CFP W 14 1 TBD Call TI Call TI
TLC2262AID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262AIPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262AIPW ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIPWLE OBSOLETE TSSOP PW 8 TBD Call TI Call TI
TLC2262AIPWR ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AIPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 2
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLC2262AMJG ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
TLC2262AMJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
TLC2262AMUB ACTIVE CFP U 10 1 TBD A42 N / A for Pkg Type
TLC2262AQD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AQDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262AQDR ACTIVE SOIC D 8 TBD Call TI Call TI
TLC2262AQDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262CPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262CPW ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CPWG4 ACTIVE TSSOP PW 8 150 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CPWLE OBSOLETE TSSOP PW 8 TBD Call TI Call TI
TLC2262CPWR ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262CPWRG4 ACTIVE TSSOP PW 8 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262ID ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262IDG4 ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262IDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 3
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLC2262IDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262IP ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262IPE4 ACTIVE PDIP P 8 50 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2262MFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
TLC2262MJGB ACTIVE CDIP JG 8 1 TBD A42 N / A for Pkg Type
TLC2262MUB ACTIVE CFP U 10 1 TBD A42 N / A for Pkg Type
TLC2262QD ACTIVE SOIC D 8 75 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262QDG4 ACTIVE SOIC D 8 1500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262QDR ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2262QDRG4 ACTIVE SOIC D 8 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AID ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264AINE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264AIPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIPWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
TLC2264AIPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AIPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AMFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 4
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLC2264AMJ ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
TLC2264AMJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
TLC2264AMWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
TLC2264AQD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AQDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264AQDR ACTIVE SOIC D 14 TBD Call TI Call TI
TLC2264AQDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CD ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264CNE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264CPW ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CPWG4 ACTIVE TSSOP PW 14 90 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CPWLE OBSOLETE TSSOP PW 14 TBD Call TI Call TI
TLC2264CPWR ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264CPWRG4 ACTIVE TSSOP PW 14 2000 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264ID ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264IDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264IDR ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 5
Orderable Device Status (1) Package Type Package
Drawing Pins Package Qty Eco Plan (2) Lead/
Ball Finish MSL Peak Temp (3) Samples
(Requires Login)
TLC2264IDRG4 ACTIVE SOIC D 14 2500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264IN ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264INE4 ACTIVE PDIP N 14 25 Pb-Free (RoHS) CU NIPDAU N / A for Pkg Type
TLC2264MFKB ACTIVE LCCC FK 20 1 TBD POST-PLATE N / A for Pkg Type
TLC2264MJB ACTIVE CDIP J 14 1 TBD A42 N / A for Pkg Type
TLC2264MWB ACTIVE CFP W 14 1 TBD A42 N / A for Pkg Type
TLC2264QD ACTIVE SOIC D 14 TBD Call TI Call TI
TLC2264QDG4 ACTIVE SOIC D 14 50 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
TLC2264QDR ACTIVE SOIC D 14 TBD Call TI Call TI
TLC2264QDRG4 ACTIVE SOIC D 14 1500 Green (RoHS
& no Sb/Br) CU NIPDAU Level-1-260C-UNLIM
(1) The marketing status values are defined as follows:
ACTIVE: Product device recommended for new designs.
LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect.
NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design.
PREVIEW: Device has been announced but is not in production. Samples may or may not be available.
OBSOLETE: TI has discontinued the production of the device.
(2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability
information and additional product content details.
TBD: The Pb-Free/Green conversion plan has not been defined.
Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that
lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes.
Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between
the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above.
Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight
in homogeneous material)
(3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature.
Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information
provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and
continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals.
TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release.
PACKAGE OPTION ADDENDUM
www.ti.com 17-Aug-2012
Addendum-Page 6
In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis.
OTHER QUALIFIED VERSIONS OF TLC2262, TLC2262A, TLC2262AM, TLC2262M, TLC2264, TLC2264A, TLC2264AM, TLC2264M :
•Catalog: TLC2262A, TLC2262, TLC2264A, TLC2264
•Automotive: TLC2264A-Q1, TLC2264A-Q1
•Military: TLC2262M, TLC2262AM, TLC2264M, TLC2264AM
NOTE: Qualified Version Definitions:
•Catalog - TI's standard catalog product
•Automotive - Q100 devices qualified for high-reliability automotive applications targeting zero defects
•Military - QML certified for Military and Defense Applications
TAPE AND REEL INFORMATION
*All dimensions are nominal
Device Package
Type Package
Drawing Pins SPQ Reel
Diameter
(mm)
Reel
Width
W1 (mm)
A0
(mm) B0
(mm) K0
(mm) P1
(mm) W
(mm) Pin1
Quadrant
TLC2262AIDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLC2262AIPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1
TLC2262CDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLC2262CPWR TSSOP PW 8 2000 330.0 12.4 7.0 3.6 1.6 8.0 12.0 Q1
TLC2262IDR SOIC D 8 2500 330.0 12.4 6.4 5.2 2.1 8.0 12.0 Q1
TLC2264AIDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLC2264AIPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
TLC2264CDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
TLC2264CPWR TSSOP PW 14 2000 330.0 12.4 6.9 5.6 1.6 8.0 12.0 Q1
TLC2264IDR SOIC D 14 2500 330.0 16.4 6.5 9.0 2.1 8.0 16.0 Q1
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 1
*All dimensions are nominal
Device Package Type Package Drawing Pins SPQ Length (mm) Width (mm) Height (mm)
TLC2262AIDR SOIC D 8 2500 340.5 338.1 20.6
TLC2262AIPWR TSSOP PW 8 2000 367.0 367.0 35.0
TLC2262CDR SOIC D 8 2500 340.5 338.1 20.6
TLC2262CPWR TSSOP PW 8 2000 367.0 367.0 35.0
TLC2262IDR SOIC D 8 2500 340.5 338.1 20.6
TLC2264AIDR SOIC D 14 2500 333.2 345.9 28.6
TLC2264AIPWR TSSOP PW 14 2000 367.0 367.0 35.0
TLC2264CDR SOIC D 14 2500 333.2 345.9 28.6
TLC2264CPWR TSSOP PW 14 2000 367.0 367.0 35.0
TLC2264IDR SOIC D 14 2500 333.2 345.9 28.6
PACKAGE MATERIALS INFORMATION
www.ti.com 17-Aug-2012
Pack Materials-Page 2
MECHANICAL DATA
MCER001A – JANUARY 1995 – REVISED JANUAR Y 1997
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
JG (R-GDIP-T8) CERAMIC DUAL-IN-LINE
0.310 (7,87)
0.290 (7,37)
0.014 (0,36)
0.008 (0,20)
Seating Plane
4040107/C 08/96
5
4
0.065 (1,65)
0.045 (1,14)
8
1
0.020 (0,51) MIN
0.400 (10,16)
0.355 (9,00)
0.015 (0,38)
0.023 (0,58)
0.063 (1,60)
0.015 (0,38)
0.200 (5,08) MAX
0.130 (3,30) MIN
0.245 (6,22)
0.280 (7,11)
0.100 (2,54)
0°–15°
NOTES: A. All linear dimensions are in inches (millimeters).
B. This drawing is subject to change without notice.
C. This package can be hermetically sealed with a ceramic lid using glass frit.
D. Index point is provided on cap for terminal identification.
E. Falls within MIL STD 1835 GDIP1-T8
IMPORTANT NOTICE
Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other
changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest
issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and
complete. All semiconductor products (also referred to herein as “components”) are sold subject to TI’s terms and conditions of sale
supplied at the time of order acknowledgment.
TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI’s terms
and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary
to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily
performed.
TI assumes no liability for applications assistance or the design of Buyers’ products. Buyers are responsible for their products and
applications using TI components. To minimize the risks associated with Buyers’ products and applications, Buyers should provide
adequate design and operating safeguards.
TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or
other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information
published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or
endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the
third party, or a license from TI under the patents or other intellectual property of TI.
Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration
and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered
documentation. Information of third parties may be subject to additional restrictions.
Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service
voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice.
TI is not responsible or liable for any such statements.
Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements
concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support
that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which
anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause
harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use
of any TI components in safety-critical applications.
In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI’s goal is to
help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and
requirements. Nonetheless, such components are subject to these terms.
No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties
have executed a special agreement specifically governing such use.
Only those TI components which TI has specifically designated as military grade or “enhanced plastic” are designed and intended for use in
military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components
which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and
regulatory requirements in connection with such use.
TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which
have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such
components to meet such requirements.
Products Applications
Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive
Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications
Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers
DLP® Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps
DSP dsp.ti.com Energy and Lighting www.ti.com/energy
Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial
Interface interface.ti.com Medical www.ti.com/medical
Logic logic.ti.com Security www.ti.com/security
Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense
Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video
RFID www.ti-rfid.com
OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com
Wireless Connectivity www.ti.com/wirelessconnectivity
Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265
Copyright © 2012, Texas Instruments Incorporated
