•For smaller tanks and
restricted space
•Use in sewer and
industrial waste
water
•Shape avoids
“ragging”, in sewer
systems
•Unaffected by
suspended solids
•Operates in Turbulent
Fluids
This is suitable for use in water, industrial wastewater and sewage, that can have
wide variations of temperature. This small design of switch is for use in more confined
spaces, where there is not enough room for the larger FFSMC type.
The rounded body design and floating attitude prevents accumulation of solids on
the body. The switch has additional internal ballast, to bring the centre of gravity and
rotation close to the cable entry point.
The switching element is a self cleaning type, that makes the complete switch
insensitive to humidity and condensation, allowing this type to operate in widely
fluctuating temperatures. The switch contacts are rated at 10 Amp resistive.
Supplied, as standard, with 5 metres cable and adjustable counterweight.
Cynergy3 Components Ltd
7 Cobham Road
Ferndown Industrial Estate
Wimborne
Dorset BH21 7PE
Tel: +44 (0) 1202 897969
sales@cynergy3.com
On - Off
Differential
15°
15°
Off - On
47
75
Minimum Cable Pivot
length 120mm
Technical Specifications LM10A LM10B LM10CWW W
Contact Form N/O N/C C/O
Material High Density Polyethylene
Temp Range °C 0 / +55 °C(WRAS approved up to +23 )
°F + 32 / +131
Cable (standard length 5m) With protective earth no earth
Standard cable covering WRC Approved
Max. working pressure 10 bar
Electrical Specifications
Power Rating Max AC : 750 VA DC : 180W
Switching Voltage Max AC : 250 V DC : 110 V
Switching Current Max. Resistive 10 A
Switching Current Max. Inductive AC : 4A DC : 1 A
129
It is necessary to use an auxiliary relay, when switching pump motors or any loads that are not
purely resistive.
LM SeriesWRAS Approved
www.cynergy3.com
ISO 9001
CERTIFIED
© 2014 Cynergy3 omponents, All Rights Reserved.C
Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
Part Numbering System
Series
Max. current
Contact Form
A = n/o
B = n/c
C = c/o
W WRC Approved=
Cable length in mtrs:
Blank = 5M standard
LM 10 A 10W
Cable covering:
Installation
cable
external
counterweight
differential
pipe
cable entrance
tie
brown
wiring diagram
for emptying pump
wiring diagram
for filling pump
black
brown
pump - on
level drop
pump - off
black
pump - off
level drop
pump - on
brown
blue
blue
brown
www.cynergy3.com
ISO 9001
CERTIFIED
© 2014 Cynergy3 omponents, All Rights Reserved.C
Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited.
LM SeriesWRAS Approved
