--
8P8C, 1X1, SMT
MAXMJ
MOD JACK - MJLS
2:1
-
-
133655
MAXCONN P.N.: MJLS-S-88-ST-GF5-30
DIELECTRIC WITHSTANDING VOLTAGE: 1000 Vrms MIN, 60Hz
CURRENT/VOLTAGE: 150 Vac AT 1.5 AMPS MAX AT 25˚C
CONTACT RESISTANCE: 30 MILLIOHMS MAX
INSULATION RESISTANCE: 500 MEGAOHMS MIN
SHIELDING: Cu ALLOY, PLATED WITH Ni, 1.0µm [40µin] MIN
CONTACTS: PHOSPHOR BRONZE
MATERIALS AND FINISH
ELECTRICAL CHARACTERISTICS
DURABILITY: 1000 MATING CYCLES
MECHANICAL CHARACTERISTICS
CONTACT FINISH: Au, 0.8µm [30µin]
HOUSING: GLASS FILLED NYLON UL 94 V-0 BLACK
TERMINAL FINISH: Sn
NOTE 2: C-UL APPROVED E145613 AND MEETS FCC REQUIREMENTS
NOTE 3: PANEL GROUND FLANGES BOTH SIDES AND TOP (GF5)
NOTE 1: SMT SIDE SHIELD TABS AND SMT TERMINALS (ST)
EMPFOHLENER FRONTPLATTEN AUSSCHNITT
RECOMMENDED PANEL
CUTOUT
TOP OF PCB
LP
RECOMMENDED PCB LAYOUT (COMPONENT MOUNTING SIDE)
LOCHBILD FUER LEITERPLATTE (BESTUECKUNGSSEITE)
TOL ±0.05 [.002] UNLESS NOTED
1 8
1 8
15.74 [.620]
0.1 [.004] MAX
11.75 [.463]
2.50 +0.30
0.00 [ .098 +.012
.000 ]
1.27 [.050]
3.18 [.125]
0.76 [.030]
18.67 [.735]
7x1.27= (8.89)
3.12 [.123]
2.54 [.100]
16.66 [.656]
12.29 [.484]
16.35 [.644]
14.52 [.572]
5.08±0.20 [.200±.008]
18.50±0.25 [.728±0.010]
DateRev.
in mm
ERNI Components
CHESTER, VA U.S.A.
Group/Type
[in]
I
Scale
Designation
Tolerances
Consider protection memo from DIN 34
All rights reserved.
Only for information.
To insure that this is the latest
version of this drawing, please
contact one of the ERNI companies
before using.
Subject to modification without
prior notice.
Drawing will not be updated.
Information:
All Dimensions
