SPECIFICATION CONTROL DRAWING
305 Constitution Drive
Menlo Park, CA 94025, USA
TITLE:
SOLDERSLEEVE SHIELD TERMINATOR
ENVIRONMENT RESISTANT WITH LEAD
Unless otherwise specified dimensions are in millimeters.
Inches dimensions are in between brackets. DOCUMENT NO.: SO63-X-W2-24-00-100
TOLERANCES:
0.00 N/A
0.0 N/A
0 N/A
ANGLES: N/A
ROUGHNESS IN
MICRON
Tyco Electronics reserves the right to
amend this drawing at any time. Users
should evaluate the suitability of the
product for their application.
DCR NUMBER:
D020447 REPLACES:
D020331
PREPARED BY:
mforonda DATE: 9-Oct-02 PROD. REV.
SEE TABLE DOC ISSUE:
1 SCALE:
None SIZE:
A SHEET:
1 of 1
If this document is printed it becomes uncontrolled. Check for the latest revision.
Product Rev. Product Dimensions Cable Dimensions
Product
Name Ident.
Code L±1.75
(L±0.070) øB
min øC
min øD
max øE
max øF
min øG
min
SO63-1-W2-24-00-100 N/C SO631R 16.50
(0.650) 1.90
(0.075) 2.65
(0.105) 1.90
(0.075) 2.65
(0.105) 0.90
(0.035) 0.50
(0.020)
SO63-2-W2-24-00-100 N/C SO632R 16.50
(0.650) 2.65
(0.105) 3.68
(0.145) 2.65
(0.105) 3.68
(0.145) 1.40
(0.055) 0.75
(0.030)
SO63-3-W2-24-00-100 N/C SO633R 16.50
(0.650) 4.30
(0.170) 5.08
(0.200) 4.30
(0.170) 5.08
(0.200) 2.15
(0.085) 1.25
(0.050)
SO63-4-W2-24-00-100 N/C SO634R 19.10
(0.750) 5.95
(0.235) 6.45
(0.255) 5.95
(0.235) 6.45
(0.255) 3.30
(0.130) 1.80
(0.070)
SO63-5-W2-24-00-100 N/C SO635R 19.10
(0.750) 7.00
(0.275) 7.60
(0.300) 7.00
(0.275) 7.60
(0.300) 4.30
(0.170) 2.50
(0.100)
MATERIALS
1. INSULATION SLEEVE: Heat-shrinkable, transparent blue, radiation cross-linked polyvinylidene fluoride.
2. SOLDER PREFORM WITH FLUX AND THERMAL INDICATOR:
SOLDER: TYPE Sn63 per ANSI-J-STD-006.
FLUX: TYPE ROL1 per ANSI-J-STD-004.
THERMAL INDICATOR: Fusible ring, melt point: 221ºC.
3. MELTABLE RING: Environment resistant thermoplastic. Color: blue.
4. GROUND LEAD: Un-insulated Stranded Silver-plated Copper in accordance with Boeing 5M2409 Specification, AWG 24.
APPLICATION
1. These parts will provide a shield termination assembly when installed in accordance to Raychem RCPS-100-70 on cables rated
for at least 125°C, meeting the dimensional criteria listed, having tin or silver plated shields.
2. Temperature rating: -55°C to +150°C.
3. Parts shall be marked with identification code per table.
For best results, prepare the cable as shown:
“G” is the minimum diameter on which the sleeve will seal.
