www.clare.com
DS-PLA140L-R05 1
PLA140L
Single-Pole, Normally Open,
Current-Limiting OptoMOS® Relay
RoHS
2002/95/EC e3
Pb
Applications
Features
Description
Ordering Information
Parameter Rating Units
Blocking Voltage 400 VP
Load Current 200 mA
Max On-resistance 13 Ω
Pin Configuration
Part Number Description
PLA140L 6-Pin DIP (50/Tube)
PLA140LS 6-Pin Surface Mount (50/Tube)
PLA140LSTR 6-Pin Surface Mount (1,000/Reel)
Switching Characteristics of
Normally Open Devices
PLA140L is a single-pole, normally open
(1-Form-A) solid state relay that uses optically
coupled MOSFET technology to provide 3750Vrms
of input to output isolation. The efficient MOSFET
switches and photovoltaic die use Clare’s patented
OptoMOS architecture. The optically coupled output
is controlled by a highly efficient GaAIAs infrared
LED.
The PLA140L also contains a built-in load current
limiting feature. This combined with low on-resistance
and very high load current handling capabilities
makes it suitable for a variety of high performance
switching applications.
• Current Limiting
• 3750Vrms Input/Output Isolation
• Small 6-Pin Package
• Low Drive Power Requirements (TTL/CMOS
Compatible)
• High Reliability
• Arc-Free With No Snubbing Circuits
• No EMI/RFI Generation
• Machine Insertable, Wave Solderable
• Surface Mount Tape & Reel Version Available
• Flammability Classification Rating of V-0
• Instrumentation
• Multiplexers
• Data Acquisition
• Electronic Switching
• I/O Subsystems
• Meters (Watt-Hour, Water, Gas)
• Medical Equipment—Patient/Equipment Isolation
• Security
• Aerospace
• Industrial Controls
• Automotive
Approvals
Form-A
I
F
I
LOAD
10%
90%
t
on
t
off
1
3
2
4
5
6
+ Control
– Control
Do Not Use
Load
Do Not Use
Load
AC/DC Configuration
1
3
2
4
5
6
+ Control
– Control
Do Not Use
+ Load
– Load
DC Only Configuration
• UL Recognized Component: File E76270
• CSA Certified Component: Certificate 1175739
• EN/IEC 60950-1 Certified Component:
TUV Certificate B 09 07 49410 004
www.clare.com
2R05
PLA140L
Absolute Maximum Ratings @ 25ºC
Electrical Characteristics @ 25ºC
Absolute Maximum Ratings are stress ratings. Stresses in
excess of these ratings can cause permanent damage to
the device. Functional operation of the device at conditions
beyond those indicated in the operational sections of this
data sheet is not implied.
Parameter Ratings Units
Blocking Voltage 400 VP
Reverse Input Voltage 5 V
Input Control Current 50 mA
Peak (10ms) 1 A
Input Power Dissipation 1150 mW
Total Power Dissipation 2800 mW
Isolation Voltage, Input to Output 3750 Vrms
Operational Temperature -40 to +85 °C
Storage Temperature -40 to +125 °C
1 Derate linearly 1.33 mW / ºC
2 Derate linearly 6.67 mW / ºC
Parameter Conditions Symbol Min Typ Max Units
Output Characteristics
Load Current (Continuous)
AC/DC Configuration -I
L
- - 200 mA
DC Configuration - - 350
Peak Load Current t=10ms ILPK - - 500 mA
On-Resistance
AC/DC Configuration IF=200mA RON
-1013Ω
DC Configuration IF=350mA - 3 4
Off-State Leakage Current VL=400VPILEAK -- 1µA
Switching Speeds
Turn-On IF=5mA, VL=10V ton -- 5
ms
Turn-Off toff -- 3
Load Current Limit IF=5mA, T
A=25ºC ICL 240 - 380 mA
Output Capacitance VL=50V, f=1MHz COUT -65 - pF
Input Characteristics
Input Control Current IL=200mA IF-- 5mA
Input Dropout Current - IF0.4 0.7 - mA
Input Voltage Drop IF=5mA VF0.9 1.2 1.4 V
Reverse Input Current VR=5V IR- - 10 µA
Common Characteristics
Capacitance, Input to Output - CI/O -3 -pF
PLA140L
www.clare.com 3
R05
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Typical Turn-On Time
(N=50, IF=5mA, IL=200mADC, TA=25ºC)
0.65 1.17 1.690.39 0.91 1.43
Turn-On (ms)
Device Count (N)
25
20
15
10
5
0
Typical Turn-Off Time
(N=50, IF=5mA, IL=200mADC, TA=25ºC)
0.300.18 0.42 0.54 0.66 0.78
Turn-Off (ms)
Device Count (N)
25
20
15
10
5
0
Typical On-Resistance Distribution
(N=50, IF=5mA, IL=200mADC, TA=25ºC)
35
30
25
20
15
10
5
0
10.0 11.0 12.09.5 10.5 11.5
On-Resistance (Ω)
Device Count (N)
Typical IF for Switch Operation
(N=50, IL=200mADC, TA=25ºC)
25
20
15
10
5
0
2.11.5 4.53.92.7
LED Current (mA)
Device Count (N)
3.3
Typical IF for Switch Dropout
(N=50, IL=200mADC, TA=25ºC)
25
20
15
10
5
0
2.11.5 3.90.9 2.7
LED Current (mA)
Device Count (N)
3.3
Typical Blocking Voltage Distribution
(N=50, TA=25ºC)
35
30
25
20
15
10
5
0
430 442 478 490
Blocking Voltage (VP)
Device Count (N)
454 466
Typical LED Forward Voltage Drop
(N=50, IF=5mA, TA=25ºC)
35
30
25
20
15
10
5
0
1.17 1.19 1.21 1.23 1.25
LED Forward Voltage Drop (V)
Device Count (N)
Typical Turn-On
vs. LED Forward Current
(IL=200mADC)
LED Forward Current (mA)
Turn-On (ms)
05 1015202530354045
1.0
0.9
0.8
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
50
Typical Turn-Off
vs. LED Forward Current
(IL=200mADC)
LED Forward Current (mA)
Turn-Off (ms)
05 1015202530354045
0.5
0.45
0.40
0.35
0.30
0.25
0.20
0.15
0.10
0.05
0
50
Typical LED Forward Voltage Drop
vs. Temperature
Temperature (ºC)
LED Forward Voltage Drop (V)
1.8
1.6
1.4
1.2
1.0
0.8
-40 -20 0 20 40 60 80 120100
I
F
=50mA
I
F
=30mA
I
F
=20mA
I
F
=10mA
I
F
=5mA
Typical Turn-On vs. Temperature
(IL=200mADC)
Temperature (ºC)
Turn-On (ms)
-40
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
I =5mA
F
I =10mA
F
I =20mA
F
Typical Turn-Off vs. Temperature
(IF=5mA, IL=200mADC)
Temperature (ºC)
Turn-Off (ms)
-40
0.7
0.6
0.5
0.4
0.3
0.2
0.1
0
-20 0 20 40 60 80 100
www.clare.com
4R05
PLA140L
PERFORMANCE DATA*
*The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application
department.
Typical IF for Switch Operation
vs. Temperature
(IL=200mADC)
Temperature (ºC)
LED Current (mA)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical IF for Switch Dropout
vs. Temperature
(IL=200mADC)
Temperature (ºC)
LED Current (mA)
-40
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0
-20 0 20 40 60 80 100
Typical On-Resistance
vs. Temperature
(IF=5mA, IL=200mADC)
Temperature (ºC)
On-Resistance (Ω)
-40
20
18
16
14
12
10
8
6
4
2
0
-20 0 20 40 60 80 100
Typical Load Current
vs. Load Voltage
(IF=5mA, TA=25ºC)
Load Voltage (V)
Load Current (mA)
250
200
150
100
50
0
-50
-100
-150
-200
-250
-4.0 -3.0 -2.0 -1.0 0 1.0 2.0 4.03.0
Typical Load Current
vs. Temperature
Temperature (ºC)
Load Current (mA)
300
250
200
150
100
50
-40 -20 0 20 40 60 80 120100
I =20mA
F
I =10mA
F
I =5mA
F
Typical Blocking Voltage
vs. Temperature
Temperature (ºC)
Blocking Voltage (VP)
-40
485
480
475
470
465
460
455
450
445
-20 0 20 40 60 80 100
Typical Leakage vs. Temperature
Measured across Pins 4&6
Temperature (ºC)
Leakage (μA)
-40
0.12
0.10
0.08
0.06
0.04
0.02
0
-20 0 20 40 60 80 100
Energy Rating Curve
Time
Load Current (A)
1.2
1.0
0.8
0.6
0.4
0.2
0
10μs1ms100μs 100ms 1s
10ms 10s 100s
PLA140L
www.clare.com 5
R05
Manufacturing Information
Moisture Sensitivity
All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all
of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry
standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to
the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled
according to the limitations and information in that standard as well as to any limitations set forth in the information or
standards referenced below.
Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced
product performance, reduction of operable life, and/or reduction of overall reliability.
This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according
to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033.
Device Moisture Sensitivity Level (MSL) Rating
PLA140L / PLA140LS MSL 1
ESD Sensitivity
This product is ESD Sensitive, and should be handled according to the industry standard JESD-625.
Reflow Profile
This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020
must be observed.
Device Maximum Temperature x Time
PLA140L / PLA140LS 250ºC for 30 seconds
Board Wash
Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is
acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated
products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes.
Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy
should not be used.
RoHS
2002/95/EC e3
Pb
www.clare.com
6R05
PLA140L
MECHANICAL DIMENSIONS
Dimensions
mm
(inches)
PCB Hole Pattern
6.350 ± 0.127
(0.250 ± 0.005)
2.540 ± 0.127
(0.100 ± 0.005)
7.620 ± 0.127
(0.300 ± 0.005)
5.080 ± 0.127
(0.200 ± 0.005)
6 - 0.800 DIA.
(6 - 0.031 DIA.)
0.254 ± 0.0127
(0.010 ± 0.0005)
9.144 ± 0.508
(0.360 ± 0.020)
7.239 TYP
(0.285 TYP)
7.620 ± 0.254
(0.300 ± 0.010)
3.302 ± 0.051
(0.130 ± 0.002) 4.064 TYP
(0.160 TYP)
0.457 ± 0.076
(0.018 ± 0.003)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
6.350 ± 0.127
(0.250 ± 0.005)
1.651 ± 0.254
(0.065 ± 0.010)
Dimensions
mm
(inches)
PCB Land Pattern
0.254 ± 0.0127
(0.010 ± 0.0005)
7.620 ± 0.254
(0.300 ± 0.010)
0.635 ± 0.127
(0.025 ± 0.005)
3.302 ± 0.051
(0.130 ± 0.002)
4.445 ± 0.254
(0.175 ± 0.010)
2.54
(0.10)
8.90
(0.3503)
1.65
(0.0649)
0.65
(0.0255)
8.382 ± 0.381
(0.330 ± 0.015) 2.54 ± 0.127
(0.100 ± 0.005)
9.524 ± 0.508
(0.375 ± 0.020) 6.350 ± 0.127
(0.250 ± 0.005)
0.457 ± 0.076
(0.018 ± 0.003)
1.651 ± 0.254
(0.065 ± 0.010)
1.651 ± 0.254
(0.065 ± 0.010)
PLA140L
PLA140LS
Specification: DS-PLA140L-R05
©Copyright 2010, Clare, Inc.
OptoMOS® is a registered trademark of Clare, Inc.
All rights reserved. Printed in USA.
8/13/2010
Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications
and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare’s Standard Terms and Conditions of
Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability,
fitness for a particular purpose, or infringement of any intellectual property right.
The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other
applications intended to support or sustain life, or where malfunction of Clare’s product may result in direct physical harm, injury, or death to a person or severe property or environmental
damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice.
For additional information please visit our website at: www.clare.com
7
PLA140L
NOTES:
1. All dimensions carry tolerances of EIA Standard 481-2
2. The tape complies with all “Notes” for constant dimensions listed on page 5 of EIA-481-2
Dimensions
mm
(inches)
Embossment
Embossed
Carrier
330.2 Dia
(13.00 Dia)
Top Cover
Tape Thickness
0.102 Max
(0.004 Max)
W=16.00
(0.63)
B0 = 10.10
(0.398)
A0 = 10.10
(0.398)
P = 12.00
(0.472)
K1 = 3.80
(0.15)
K0 = 4.90
(0.19)
User Direction of Feed
PLA140LS Tape & Reel
