2
Absolute Maximum Ratings Thermal Information
Supply Voltage
CA741C, CA1458, LM741C, LM1458 (Note 1) . . . . . . . . . . . 36V
CA741,CA1558,LM741(Note1) ..................... 44V
DifferentialInputVoltage.............................. 30V
InputVoltage..................................±VSUPPLY
Offset Terminal to V- Terminal Voltage (CA741C, CA741). . . . ±0.5V
OutputShortCircuitDuration....................... Indefinite
Operating Conditions
Temperature Range
CA741,CA1558,LM741 ...................-55
oCto125
oC
CA741C, CA1458, LM741C, LM1458 (Note 2) . . . . 0oCto70
oC
Thermal Resistance (Typical, Note 3) θJA (oC/W) θJC (oC/W)
PDIPPackage................... 130 N/A
CanPackage.................... 155 67
MaximumJunctionTemperature(CanPackage).......... 175
oC
Maximum Junction Temperature (Plastic Package). . . . . . . . 150oC
MaximumStorageTemperatureRange..........-65
oCto150
oC
Maximum Lead Temperature (Soldering 10s) . . . . . . . . . . . . 300oC
CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress only rating and operationofthe
device at these or any other conditions above those indicated in the operational sections of this specification is not implied.
NOTES:
1. Values apply for each section of the dual amplifiers.
2. All types in any package style can be operated over the temperature range of -55oCto125oC, although the published limits for certain electrical
specification apply only over the temperature range of 0oCto70
oC.
3. θJA is measured with the component mounted on an evaluation PC board in free air.
Electrical Specifications Typical Values Intended Only for Design Guidance, VSUPPLY =±15V
PARAMETER SYMBOL TEST CONDITIONS TYPICAL VALUE
(ALL TYPES) UNITS
Input Capacitance CI1.4 pF
Offset Voltage Adjustment Range ±15 mV
Output Resistance RO75 Ω
Output Short Circuit Current 25 mA
Transient Response Unity Gain, VI=20mV,R
L=2kΩ,
CL≤100pF
Rise Time tr0.3 µs
Overshoot O.S. 5.0 %
Slew Rate (Closed Loop) SR RL≥2kΩ0.5 V/µs
Gain Bandwidth Product GBWP RL=12kΩ0.9 MHz
Electrical Specifications For Equipment Design, VSUPPLY =±15V
PARAMETER TEST
CONDITIONS TEMP
(oC)
(NOTE 4)
CA741, CA1558, LM741
(NOTE 4)
CA741C, CA1458, LM741C,
LM1458
UNITSMIN TYP MAX MIN TYP MAX
Input Offset Voltage RS≤10kΩ25 - 1 5 - 2 6 mV
Full - 1 6 - - 7.5 mV
Input Common Mode Voltage Range 25 - - - ±12 ±13 - V
Full ±12 ±13----V
Common Mode Rejection Ratio RS≤10kΩ25 - - - 70 90 - dB
Full7090----dB
Power Supply Rejection Ratio RS≤10kΩ25----30150µV/V
Full-30150---µV/V
Input Resistance 25 0.3 2 - 0.3 2 - MΩ
CA741, CA741C, CA1458, CA1558, LM741, LM741C, LM1458