Product data sheet
Characteristics
ATS01N112FT
soft starter for asynchronous motor - ATS01 - 12
A - 110..480V - 1.5..5.5 KW
Product availability : Stock - Normally stocked in distribution facility
Price* : 145.00 USD
Main
Range of product Altistart 01
Product or component type Soft starter
Product destination Asynchronous motors
Product specific application Simple machine
Device short name ATS01
Phase 1 phase
[Us] rated supply voltage 110...480 V - 10...10 %
Motor power kW 2.2kW, 3 phase 230 V
5.5kW, 3 phase 400 V
1.5kW, 1 phase 230 V
Maximum Horse Power Rating 3hp, 3 phase 230 V
1.5hp, 3 phase 210 V
7.5hp, 3 phase 460 V
IcL starter rating 12A
Utilisation category AC-53B EN/IEC 60947-4-2
Current consumption 60 A at nominal load
Type of start Start with voltage ramp
Power dissipation in W 1W at full load and at end of starting
61W in transient state
Complementary
Assembly style With heat sink
Function available Integrated bypass
Supply voltage limits 99…528V
Supply frequency 50...60 Hz - 5...5 %
Network frequency 47.5...63 Hz
Output voltage <= power supply voltage
[Uc] control circuit voltage 110 V AC +/- 10 % 35 mA
24 V AC/DC +/- 10 % 30 mA
240 V AC +/- 10 % 80 mA
Starting time 1 s / 100
Disclaimer: This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications
*Price is “List Price” and may be subject to a trade discount – check with your local distributor or retailer for actual price.
Feb 15, 2021
1
5 s / 20
Adjustable from 1 to 5 s
Starting torque 30...80 % of starting torque of motor connected directly on the line supply
Discrete output current 2 A DC-13
3 A AC-15
Tightening torque 16.82…22.13lbf.in (1.9…2.5N.m)
4.43lbf.in (0.5N.m)
Electrical connection 4 mm screw clamp terminal - rigid 1 1...10 mm² AWG 8 power circuit
Screw connector - rigid 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - rigid 2 1...6 mm² AWG 10 power circuit
Screw connector - rigid 2 0.5...1 mm² AWG 17 control circuit
Screw connector - flexible with cable end 1 0.5...1.5 mm² AWG 16 control circuit
4 mm screw clamp terminal - flexible without cable end 1 1.5...10 mm² AWG 8 power circuit
Screw connector - flexible without cable end 1 0.5...2.5 mm² AWG 14 control circuit
4 mm screw clamp terminal - flexible with cable end 2 1...6 mm² AWG 10 power circuit
4 mm screw clamp terminal - flexible without cable end 2 1.5...6 mm² AWG 10 power circuit
Screw connector - flexible without cable end 2 0.5...1.5 mm² AWG 16 control circuit
Marking CE
Operating position Vertical +/- 10 degree
Height 4.88in (124mm)
Maximum Width 1.77in (45mm)
Maximum Depth 5.16in (131mm)
Net Weight 0.62lb(US) (0.28kg)
Compatibility code ATS01N1
Motor power range AC-3 1.1…2kW 200…240V 1 phase
2.2…3kW 200…240V 3 phase
4…6kW 380…440V 3 phase
Motor starter type Soft starter
Environment
Electromagnetic compatibility Conducted and radiated emissions level B CISPR 11
Conducted and radiated emissions level B conforming to IEC 60947-4-2
Damped oscillating waves level 3 conforming to IEC 61000-4-12
Electrostatic discharge level 3 IEC 61000-4-2
EMC immunity EN 50082-1
EMC immunity EN 50082-2
Harmonics IEC 1000-3-2
Harmonics IEC 1000-3-4
Immunity to conducted interference caused by radio-electrical fields level 3 IEC 61000-4-6
Immunity to electrical transients level 4 conforming to IEC 61000-4-4
Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3
Micro-cuts and voltage fluctuation IEC 61000-4-11
Voltage/current impulse level 3 IEC 61000-4-5
Standards EN/IEC 60947-4-2
Product certifications B44.1-96/ASME A17.5 for starter wired to the motor delta terminal
C-tick
CCC
UL
CSA
GOST
IP degree of protection IP20
Pollution degree 2 EN/IEC 60947-4-2
Vibration resistance 1 gn 13…150Hz)EN/IEC 60068-2-6
1.5 mm peak to peak 3…13Hz)EN/IEC 60068-2-6
Shock resistance 15 gn 11ms EN/IEC 60068-2-27
Relative humidity 5…95% without condensation or dripping water EN/IEC 60068-2-3
Ambient air temperature for operation 14…104°F (-10…40°C) without derating)
104…122°F (40…50°C) with current derating of 2 % per °C)
Ambient air temperature for storage -13…158°F (-25…70°C) EN/IEC 60947-4-2
Operating altitude <= 1000 m without derating
> 3280.84 ft (1000 m) with current derating of 2.2 % per additional 100 m
2
Ordering and shipping details
Category 22392 - ATSU01/ATS01 LOW HP SOFT STARTERS
Discount Schedule I11
GTIN 00785901667452
Nbr. of units in pkg. 1
Package weight(Lbs) 0.78lb(US) (0.35kg)
Returnability Yes
Country of origin DE
Packing Units
Unit Type of Package 1 PCE
Package 1 Height 2.05in (5.2cm)
Package 1 width 6.10in (15.5cm)
Package 1 Length 6.89in (17.5cm)
Offer Sustainability
California proposition 65 WARNING: This product can expose you to chemicals including: Lead and lead compounds, which
is known to the State of California to cause cancer and birth defects or other reproductive harm. For
more information go to www.P65Warnings.ca.gov
REACh Regulation REACh Declaration
REACh free of SVHC Yes
EU RoHS Directive Pro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal free Yes
Mercury free Yes
RoHS exemption information Yes
China RoHS Regulation China RoHS declaration
Circularity Profile End of Life Information
WEEE The product must be disposed on European Union markets following specific waste collection and
never end up in rubbish bins.
Contractual warranty
Warranty 18 months
3
Product data sheet
Dimensions Drawings
ATS01N112FT
Dimensions
Mounting on Symetrical (35 mm) Rail
Screw Fixing
(1) Retractable fixings
4
Product data sheet
Connections and Schema
ATS01N112FT
Example of 3-phase Power Supply Connection
(1) A line contactor must be used in the sequence.
A1 : Soft starter
Q1 : Motor circuit-breaker
KM1 : Contactors
F1, F2 : Control protection fuses
S1, S2 : Pushbuttons
5
Product data sheet
Technical Description
ATS01N112FT
Function Diagram
Us : Power supply voltage
Uc : Control supply voltage
LED 1 : Green LED
LED 2 : Yellow LED
Um : Motor voltage
6