American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display PACKAGE DIMENSION Notes: 1. All pins are 0.60[0.24], dimensions in millimeter. 2. Tolerances are 0.25[.01] unless otherwise noted. Part No. Chip Material Chip Emitted Face/Segment CTD591LE-W/W AlGaInP Red White/ White Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 1 American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display PIN POSITION & INTERNAL CIRCUIT DIAGRAM Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 2 American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display ABSOLUTE MAXIMUM RATINGS (Ta=25C) Parameter Symbol Value Unit Power Dissipation Per Dice PD 70 mW Derating Liner from 25C Per Dice -- 0.33 mA/C Continuous Forward Current Per Dice IF 25 mA Peak Current Per Dice (duty cycle 1/10, 1KHz) IFP 90 mA Reverse Voltage Per Dice VR 5 V Operating Temperature Range TOPR -35~+85 C Storage Temperature Range TSTG -35~+85 C OPTICAL-ELECTRICAL CHARACTERISTICS Parameter Symbol Test Condition (Ta=25C) Min Value Typ Max Unit Forward Voltage VF -- 2.0 2.8 V Luminous Intensity IV 27.5 50 -- mcd Peak Emission Wavelength P -- 644 -- nm Dominant Wavelength D -- 630 -- nm Spectrum Radiation Bandwidth -- 20 -- nm Luminous Intensity Matching Ratio Reverse Current IF=20mA IV-m IF=10mA -- -- 2:1 -- IR VR=5V -- -- 100 A Forward voltage tolerance: 0.1V Luminous intensity tolerance: 20% Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 3 American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display LUMINOUS INTENSITY BIN GRADE (IF=20mA) Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 4 American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display OPTICAL CHARACTERISTIC CURVES Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 5 American Opto Plus LED Corp. CTD591LE-W/W 15.0 x 15.0 x 11.0 mm Touch LED Red Display RECOMMENDED SOLDERING CONDITIONS 1. Wave Soldering Profile Distance: 1.6mm min (from seating plane) 2. Hand Soldering (Iron Condition) Soldering Iron: 30W Max Temperature: 350C Max Soldering Time: 3 seconds Max (one time) Distance: 1.6mm min (from seating plane) Version 1.0 Date: 11-18-2014 Specifications are subject to change without notice. American Opto Plus LED Corp. 1206 E. Lexington Ave., Pomona CA 91766 Tel: 909-465-0080 Fax: 909-465-0130 www.aopled.com 6