Home Products Technical Support Global Network About Us
Home > Products> Product Category > Switches> Limit Switches > General-purpose Vertical > WL-N / WLM-N
Select the Best Two-circuit Switch for
the Operating Environment and
Application from a Wide Range of
Models
Item list of WL-N / WLM-N
about this Product Family
Inquiry of this Product
Related Contents
Common (4)
Limit Switches (2)
Note: Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
Basic, High-sensitivity, and High-precision Switches
Basic
WLCA2-N
WLCA2-2-N
WLCA2-2N-N
High-sensitivity
WLG2-N
High-precision
WLGCA2-N
The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate.
Basic
WLCA2-7-N
Basic
WLCA2-8-N
Basic
WLCA12-N
last update: October 07, 2015
Caution: All units are in millimeters unless otherwise indicated.
General-purpose Switches
Standard Switches
Switches with Roller Lever Actuators
Roller lever R38
Roller lever R50
Roller lever R63
Adjustable roller lever
Product Category
Switches
Limit Switches
General-purpose Vertical
WL-N / WLM-N
D4C
D4CC
WL, WLM
HL-5000
D4A-[]N
Product Category
Cautions
Item A to Z Index
Applications
Correction Notice
WL-N / WLM-N
Two-circuit Limit Switch / Long-life Two-circuit Limit Switch
Features Lineup Specifications Dimensions Catalog
Search
Global Contact
WLCA12-2-N
WLCA12-2N-N
High-sensitivity
WLG12-N
Only the external appearance of the set position indicator plate varies on high-sensitivity models.
Please click image to enlarge (open in a new window).
*1. The operating characteristics for WLCA12-N, WLCA12-2-N, WLCA12-2N-N, and WLG12-N are measured at the
lever length of 38 mm.
Basic
WLCL-N
WLCL-2-N
WLCL-2N-N
High-sensitivity
WLGL-N
Only the external appearance of the set position indicator plate varies on high-sensitivity models.
Basic
WLCAL4-N
Basic
WLCAL5-N
Protective Switches
WLCA32-41-N
WLCA32-42-N
WLCA32-43-N
WLCA32-44-N
Adjustable rod lever 25 to 140 mm
Adjustable rod lever
Rod spring lever
Fork lever lock
The WLCA32-41-N is shown in the following diagram.
Please click image to enlarge (open in a new window).
Note: The actuator on the WLCAL4-N and WLCAL5-N is heavy, which may result in resetting problems depending on
the direction the Switch is mounted. Mount the Switch so that the actuator is facing downwards to prevent this
problem from occurring.
*1. The operating characteristics for WLCL-N, WLCL-2-N, WLCL-2N-N, and WLGL-N are measured at the lever length
of 140 mm.
*2. The operating characteristics of WLCAL4-N are measured at a rod length of 380 mm.
Switches with Plunger Actuators
WLD18-N
WLSD-N
WLD28-N
WLSD2-N
WLD38-N
Switches with Plunger Actuators
Sealed Top Plunger
Horizontal Plunger
Sealed Top-roller Plunger
Horizontal-roller Plunger
Sealed Top-ball Plunger
WLNJ-S2-N
* These values are for the top end of the spring, rod, or wire.
(For details about applicable cables, refer to Connecting Sensor I/O Connectors Cable and Socket on Catalog.)
Basic Switches
WLCA2-LDK13-N
High-sensitivity Switches
WLG2-LDK13-N
High-precision Switches
WLGCA2-LDK13-N
The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate.
Basic Switches
WLCA2-LD-M1J-N
High-sensitivity Switches
WLG2-LD-M1J-N
High-precision Switches
WLGCA2-LD-M1J-N
Steel Wire
Sensor I/O connector Switches
Switches with Roller Lever Actuators
Switches with Direct-wired Connectors
Switches with Pre-wired Connectors
The only difference in the shape for High-sensitivity and High-precision Switches is the set position marker plate.
Note: The following diagrams are for a indicator-equipped models.
WLCA2-LD-N
WLCA2-LE-N
Basic Switches
WLCA2-[]S-N
High-sensitivity Switches
WLG2-[]S-N
High-precision Switches
WLGCA2-[]S-N
WLCA2-[]S-M1J-1-N
Operation indicator Switches
Roller lever
Spatter-prevention Switches
Switches with Roller Lever Actuators
Switches with Screw Terminals
Switches with Pre-wired Connectors
Switches with Sealed Top-roller Plungers
Switches with Screw Terminals
WLD28-[]S-N
WLD28-[]S-M1J-1-N
Note: The above diagrams are for Indicator-equipped Switches.
Please click image to enlarge (open in a new window).
Basic Switches
WLMCA2-LD-N
High-sensitivity Switches
WLMG2-LD-N
High-precision Switches
WLMGCA2-LD-N
Basic Switches
WLMCA2-LDK13-N
High-sensitivity Switches
WLMG2-LDK13-N
High-precision Switches
WLMGCA2-LDK13-N
Basic Switches
WLMCA2-LD-M1J-N
High-sensitivity Switches
WLMG2-LD-M1J-N
High-precision Switches
WLMGCA2-LD-M1J-N
Switches with Pre-wired Connectors
Long-life Switches
Switches with Roller Lever Actuators
Switches with Screw Terminals
Switches with Direct-wired Connectors
Switches with Pre-wired Connectors
Note: 1. Unless otherwise indicated, a tolerance of ±0.4 mm applies to all dimensions.
2. The above diagrams are for Indicator-equipped Switches.
Lever: Only rotating lever models are illustrated.
WL-1A100
Standard Lever
WL-1A115
Resin Roller
WL-1A400
Bearing Roller
WL-1A118
Nylon Roller:
Roller Width: 30 mm
WL-1A105
Double Nuts
WL-1A103S
Spatter
WL-1A200
Lever Length: 50
Roller Width: 15
Actuators (Levers Only)
WL-1A300
Lever Length: 63
WL-2A100
WL-2A111
Resin Roller
WL-2A107
Double Nuts
WL-2A108
Resin Roller
WL-2A122
WL-2A106
WL-2A130
WL-2A104
WL-2A110
WL-2A105
WL-1A106
WL-1A110
WL-4A100
WL-4A201
WL-3A100
WL-3A106
Double Nut
WL-3A108
WL-3A200
WL-3A203
WL-4A112
WL-2A129
Top of Page
OMRON Corporation Sitemap Terms of Use Privacy Policy
© Copyright OMRON Corporation 2007 - 2016. All Rights Reserved.
WL-5A101
WL-5A100 has a plastic roller
WL-5A103
WL-5A102 has a plastic roller
WL-5A105
WL-5A104 has a plastic roller
Note: When using the adjustable roller (rod) lever, make sure that the lever is facing downwards.
Use caution, as telegraphing (the Switch turns ON and OFF repeatedly due to inertia) may occur.
last update: October 07, 2015
