BriLux 1W Light Source
BTP-183XXCQ-XX-XX
Package Dimension
[Note 1]
Features
Highest Lumen Per Watt
Long Operational Life
More Energy Efficient
IC Compatible
Low DC Voltage
Superior ESD Protection
Smallest Footprint
Applications
Accent Lighting
Automotive Exterior/Interior Light
High Power Back Light
Reading Light
Marine/Miner’s Lighting
Portable Lighting
Tolerance: ± see spec Unit: mm
Optical Characteristics at Ta=25ºC, IF=300mA
LED CHIP Wavelength/CCT
Range (nm/K)
Drive
Voltage
Luminous
Flux
@300mA(lm)
PART NUMBER
MATERIAL
Lens
Color Min/Max Typ. Typ.
VIEW
ANGLE
2θ1/2
(deg)
BTP-183BLCQ-XX-08 AlInGaN Water Clear 460~475 3.40V 8 lm 60
BTP-183GBCQ-XX-08 AlInGaN Water Clear 475~485 3.40V 8 lm 60
BTP-183WHCQ-XX-20 AlInGaN Water Clear 5000K 8000K 3.40V 20 lm 60
Note:
1) Picture for illustration purpose only. Please refer to outline dimension for actual package size.
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-183XXCQ-XX-XX
Absolute Maximum Ratings at Ta=25ºC
Parameter White/Blue
DC Forward Current (mA)[1] 300
Peak Pulsed Forward Current (mA) 500
Average Forward Current (mA) 300
Reverse Voltage (V) 5
LED Junction Temperature (°C) [3] 120
Thermal Resistance without heatsink (°C/W) 80
Storage Temperature (°C) -20 to +80
Operating Temperature (°C) -10 to +70
Application Notes:
1. Proper forward current must be observed to maintain the junction temperature below maximum
rating
2. Although all products listed are class on e ESD protec tion (+/- 1KV by HBM mode), care must be
fully taken when handling products
3. Specification is subjected to change without notice.
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-183XXCQ-XX-XX
Typical Electro-Optical Characteristics Curves at Ta=25ºC
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
BriLux 1W Light Source
BTP-183XXCQ-XX-XX
Note: The recommended maximum reflow temperature is less than 220ºC
Recommended Soldering Pattern
BT-Rev. 1.0a
Specifications are subject to change without notice.
Copyright © 2003 Brilliance Technologies Co., Ltd. All rights reserved.
DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com
