195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 191 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Solid Tantalum Chip Capacitors
TANTAMOUNT®, Conformal Coated
FEATURES
• 8 mm, 12 mm tape packaging to EIA-481
reeling per IEC 60286-3.
7" (178 mm) standard 13" (330 mm) available
• US and European case sizes available
• Mounting: Surface mount
• Terminations: 100 % tin (2) standard, tin/lead available
• Compliant to RoHS Directive 2002/95/EC
Note
*Pb containing terminations are not RoHS compliant, exemptions
may apply
PERFORMANCE/ELECTRICAL CHARACTERISTICS
www.vishay.com/doc?40088
Operating Temperature: - 55 °C to + 85 °C
(To + 125 °C with voltage derating)
Capacitance Range: 0.1 μF to 330 μF
Capacitance Tolerance: ± 10 %, ± 20 % standard
Voltage Rating: 2 VDC to 50 VDC
Note
• Preferred tolerance and reel sizes are in bold.
We reserve the right to supply higher voltage ratings and tighter capacitance tolerance capacitors in the same case size.
ORDERING INFORMATION
195D 106 X0 004 S 2 T
TYPE CAPACITANCE CAPACITANCE
TOLERANCE
DC VOLTAGE
RATING AT + 85 °C
CASE CODE TERMINATION PACKAGING
This is expressed
in picofarads.
The first two digits
are the significant
figures. The third
is the number of
zeros to follow.
X0 = ± 20 %
X9 = ± 10 %
X5 = ± 5 %
(Special order)
This is expressed in
volts. To complete
the three-digit
block, zeros
precede the voltage
rating. A decimal
point is indicated by
an “R” (6R3 = 6.3 V).
See Ratings
and Case
Codes table
Style 2 is standard
2 = 100 % tin
4 = Gold plated
8 = Solder plated
(60/40)
Special order
T = Tape and reel
7" [178 mm] reel
standard.
For H case size
lengthwise
W = Tape and reel
13" [330 mm] reel
available
See Standard Packaging
Quantity table
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 192 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
Note
• The anode termination (D less B) will be a minimum of 0.010" (0.25 mm), C case = 0.005" (0.131 mm) minimum
DIMENSIONS in inches [millimeters]
CASE
CODE L W H A B C (MIN.) D (REF.) J (MAX.)
STANDARD CASE CODES
C0.087 max.
[2.21 max.]
0.045 ± 0.010
[1.14 ± 0.25]
0.045 ± 0.010
[1.14 ± 0.25]
0.016 ± 0.008
[0.40 ± 0.20]
0.042 ± 0.010
[1.07 ± 0.25] -0.063
[1.60]
0.004
[0.10]
S0.143 max.
[3.63 max.]
0.072 ± 0.008
[1.83 ± 0.20]
0.048 ± 0.008
[1.22 ± 0.20]
0.023 ± 0.010
[0.58 ± 0.25]
0.085 ± 0.015
[2.16 ± 0.37] -0.114
[2.90]
0.004
[0.10]
V0.143 max.
[3.63 max.]
0.104 ± 0.010
[2.65 ± 0.25]
0.051 ± 0.010
[1.30 ± 0.25]
0.023 ± 0.010
[0.58 ± 0.25]
0.085 ± 0.015
[2.16 ± 0.37] -0.114
[2.90]
0.004
[0.10]
X0.285 max.
[7.24 max.]
0.104 ± 0.010
[2.65 ± 0.25]
0.051 ± 0.010
[1.30 ± 0.25]
0.039 ± 0.020
[1.00 ± 0.50]
0.200 ± 0.027
[5.08 ± 0.69] -0.244
[6.20]
0.004
[0.10]
Y0.285 max.
[7.24 max.]
0.104 ± 0.010
[2.65 ± 0.25]
0.069 ± 0.010
[1.75 ± 0.25]
0.039 ± 0.020
[1.00 ± 0.50]
0.200 ± 0.027
[5.08 ± 0.69] -0.244
[6.20]
0.004
[0.10]
Z0.285 max.
[7.24 max.]
0.104 ± 0.010
[2.65 ± 0.25]
0.104 ± 0.010
[2.65 ± 0.25]
0.039 ± 0.020
[1.00 ± 0.50]
0.200 ± 0.027
[5.08 ± 0.69] -0.244
[6.20]
0.004
[0.10]
R0.283 max.
[7.20 max.]
0.236 + 0.012/- 0.024
[6.0 + 0.30/- 0.60]
0.138 ± 0.012
[3.50 ± 0.30]
0.051 ± 0.012
[1.30 ± 0.30]
0.181 ± 0.025
[4.60 ± 0.60] -0.244
[6.20]
0.004
[0.10]
EUROPEAN CASE CODES
A0.110 ± 0.008
[2.80 ± 0.20]
0.0591 ± 0.012
[1.5 ± 0.30]
0.055 max.
[1.40 max.]
0.028 ± 0.012
[0.70 ± 0.30]
0.063 ± 0.012
[1.60 ± 0.30]
0.012
[0.3] --
B0.165 ± 0.008
[4.20 ± 0.20]
0.055 ± 0.012
[1.4 ± 0.30]
0.063 max.
[1.6 max.]
0.031 ± 0.012
[0.80 ± 0.30]
0.098 ± 0.012
[2.50 ± 0.30]
0.012
[0.3] --
D0.165 ± 0.008
[4.20 ± 0.20]
0.083 ± 0.012
[2.1 ± 0.30]
0.063 max.
[1.6 max.]
0.031 ± 0.012
[0.80 ± 0.30]
0.098 ± 0.012
[2.50 ± 0.30]
0.02
[0.5] --
E0.217 ± 0.012
[5.50 ± 0.30]
0.083 ± 0.012
[2.1 ± 0.30]
0.067 max.
[1.70 max.]
0.039 ± 0.012
[1.00 ± 0.30]
0.126 ± 0.012
[3.20 ± 0.30]
0.031
[0.8] --
F0.197 ± 0.012
[5.0 ± 0.30]
0.130 ± 0.012
[3.3 ± 0.30]
0.079 max.
[2.00 max.]
0.039 ± 0.012
[1.00 ± 0.30]
0.142 ± 0.012
[3.60 ± 0.30]
0.031
[0.8] --
G0.276 ± 0.012
[7.00 ± 0.30]
0.102 ± 0.012
[2.6 ± 0.30]
0.110 max.
[2.80 max.]
0.039 ± 0.012
[1.00 ± 0.30]
0.177 ± 0.012
[4.5 ± 0.30]
0.031
[0.8] --
H0.307 ± 0.012
[7.80 ± 0.30]
0.146 ± 0.012
[3.7 ± 0.30]
0.118 max.
[3.0 max.]
0.039 ± 0.012
[1.00 ± 0.30]
0.197 ± 0.012
[5.00 ± 0.30]
0.031
[0.8] --
L
A
B
D
REF.
W
J
J
H
MAX. MAX.
Tantalum wire
nib identies
anode (+)
terminal
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 193 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
RATINGS AND CASE CODES
μF 2 V 4 V 6.3 V 10 V 15 V 16 V 20 V 25 V 35 V 40 V 50 V
0.10 AAA/C
0.15 AAA/C
0.22 S A A B/C/S
0.33 AB/CBB/S
0.47 A A A C B/S B D/V
0.68 A A C B/S D/S D D/V
1.0 A/S B B/C B/S S D/S D E/X
1.5 A C B B/S S D/S E/V E F/X
2.2 A C B/S S D/S E/V F/X F F/Y
3.3 A C B/S S D D/S E/V X F/Y F G/Z
4.7 AB/SSD/SEE/VX F/XG/ZGH/Z
6.8 A S D/S E/V X F/X G/Y H/Z H R
10 A D/S E/V X F F/X Y G/Y Z R
15 E/V X F/X YG/ZH/ZR
22 X F/X Y G G/Y/Z H/Z R R
33 F/X Y G/Z H H/Z R R
47 Y G/Y H/Z R R
68 G/Y H/Z R R
100 H/Z Z H/R
120 R R R
150 R R R
180 R R
220 R R
330 R
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
2 VDC AT + 85 °C, 1.2 VDC AT + 125 °C
3.3 A 195D335(1)002A(2)(3) 0.5 8
4.7 A 195D475(1)002A(2)(3) 0.5 8
6.8 A 195D685(1)002A(2)(3) 0.5 8
10 A 195D106(1)002A(2)(3) 0.6 8
4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C
2.2 A 195D225(1)004A(2)(3) 0.5 8
3.3 C 195D335(1)004C(2)(3) 0.5 6
4.7 B 195D475(1)004B(2)(3) 0.5 8
4.7 S 195D475(1)004S(2)(3) 0.5 6
6.8 S 195D685(1)004S(2)(3) 0.5 6
10 D 195D106(1)004D(2)(3) 0.5 8
10 S 195D106(1)004S(2)(3) 0.5 6
15 E 195D156(1)004E(2)(3) 0.6 8
15 V 195D156(1)004V(2)(3) 0.6 6
22 X 195D226(1)004X(2)(3) 0.9 6
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 194 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
4 VDC AT + 85 °C, 2.7 VDC AT + 125 °C
33 F 195D336(1)004F(2)(3) 1.3 8
33 X 195D336(1)004X(2)(3) 1.3 6
47 Y 195D476(1)004Y(2)(3) 1.9 6
68 G 195D686(1)004G(2)(3) 2.7 8
68 Y 195D686(1)004Y(2)(3) 2.7 6
100 H 195D107(1)004H(2)(3) 4.0 8
100 Z 195D107(1)004Z(2)(3) 4.0 8
120 R 195D127(1)004R(2)(3) 4.8 8
150 R 195D157(1)004R(2)(3) 6.0 8
180 R 195D187(1)004R(2)(3) 7.2 8
220 R 195D227(1)004R(2)(3) 8.8 8
330 R 195D337(1)004R(2)(3) 13.2 8
6.3 VDC AT + 85 °C, 4 VDC AT + 125 °C
1.5 A 195D155(1)6R3A(2)(3) 0.5 8
2.2 C 195D225(1)6R3C(2)(3) 0.5 6
3.3 B 195D335(1)6R3B(2)(3) 0.5 8
3.3 S 195D335(1)6R3S(2)(3) 0.5 6
4.7 S 195D475(1)6R3S(2)(3) 0.5 6
6.8 D 195D685(1)6R3D(2)(3) 0.5 8
6.8 S 195D685(1)6R3S(2)(3) 0.5 6
10 E 195D106(1)6R3E(2)(3) 0.6 8
10 V 195D106(1)6R3V(2)(3) 0.6 6
15 X 195D156(1)6R3X(2)(3) 0.9 6
22 F 195D226(1)6R3F(2)(3) 1.3 8
22 X 195D226(1)6R3X(2)(3) 1.3 6
33 Y 195D336(1)6R3Y(2)(3) 2.0 6
47 G 195D476(1)6R3G(2)(3) 2.8 8
47 Y 195D476(1)6R3Y(2)(3) 2.8 6
68 H 195D686(1)6R3H(2)(3) 4.1 8
68 Z 195D686(1)6R3Z(2)(3) 4.1 6
100 Z 195D107(1)6R3Z(2)(3) 6.0 8
120 R 195D127(1)6R3R(2)(3) 7.2 8
150 R 195D157(1)6R3R(2)(3) 9.0 8
180 R 195D187(1)6R3R(2)(3) 10.8 8
220 R 195D227(1)6R3R(2)(3) 13.2 8
10 VDC AT + 85 °C, 7 VDC AT + 125 °C
0.22 S 195D224(1)010S(2)(3) 0.5 4
1.0 A 195D105(1)010A(2)(3) 0.5 6
1.0 S 195D105(1)010S(2)(3) 0.4 6
1.5 C 195D155(1)010C(2)(3) 0.5 6
2.2 B 195D225(1)010B(2)(3) 0.5 6
2.2 S 195D225(1)010S(2)(3) 0.5 6
3.3 S 195D335(1)010S(2)(3) 0.5 6
4.7 D 195D475(1)010D(2)(3) 0.5 6
4.7 S 195D475(1)010S(2)(3) 0.5 6
6.8 E 195D685(1)010E(2)(3) 0.7 6
6.8 V 195D685(1)010V(2)(3) 0.7 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 195 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
10 VDC AT + 85 °C, 7 VDC AT + 125 °C
10 X 195D106(1)010X(2)(3) 1.0 6
15 F 195D156(1)010F(2)(3) 1.5 6
15 X 195D156(1)010X(2)(3) 1.5 6
22 Y 195D226(1)010Y(2)(3) 2.2 6
33 G 195D336(1)010G(2)(3) 3.3 6
33 Z 195D336(1)010Z(2)(3) 3.0 6
47 H 195D476(1)010H(2)(3) 4.7 6
47 Z 195D476(1)010Z(2)(3) 4.7 6
68 R 195D686(1)010R(2)(3) 6.8 6
100 H 195D107(1)010H(2)(3) 8.0 7
100 R 195D107(1)010R(2)(3) 10.0 8
120 R 195D127(1)010R(2)(3) 12.0 8
150 R 195D157(1)010R(2)(3) 15.0 8
15 VDC AT + 85 °C, 10 VDC AT + 125 °C
0.47 A 195D474(1)015A(2)(3) 0.5 6
0.68 A 195D684(1)015A(2)(3) 0.5 6
1.0 B 195D105(1)015B(2)(3) 0.5 6
1.5 B 195D155(1)015B(2)(3) 0.5 6
3.3 D 195D335(1)015D(2)(3) 0.5 6
4.7 E 195D475(1)015E(2)(3) 0.7 6
10 F 195D106(1)015F(2)(3) 1.5 6
22 G 195D226(1)015G(2)(3) 3.3 6
33 H 195D336(1)015H(2)(3) 5.0 6
16 VDC AT + 85 °C, 10 VDC AT + 125 °C
0.47 A 195D474(1)016A(2)(3) 0.5 6
0.68 A 195D684(1)016A(2)(3) 0.5 6
1.0 B 195D105(1)016B(2)(3) 0.5 6
1.0 C 195D105(1)016C(2)(3) 0.5 4
1.5 B 195D155(1)016B(2)(3) 0.5 6
1.5 S 195D155(1)016S(2)(3) 0.5 6
2.2 S 195D225(1)016S(2)(3) 0.5 6
3.3 D 195D335(1)016D(2)(3) 0.5 6
3.3 S 195D335(1)016S(2)(3) 0.5 6
4.7 E 195D475(1)016E(2)(3) 0.7 6
4.7 V 195D475(1)016V(2)(3) 0.7 6
6.8 X 195D685(1)016X(2)(3) 1.0 6
10 F 195D106(1)016F(2)(3) 1.5 6
10 X 195D106(1)016X(2)(3) 1.5 6
15 Y 195D156(1)016Y(2)(3) 2.3 6
22 G 195D226(1)016G(2)(3) 3.3 6
22 Y 195D226(1)016Y(2)(3) 3.2 6
22 Z 195D226(1)016Z(2)(3) 3.3 6
33 H 195D336(1)016H(2)(3) 5.0 6
33 Z 195D336(1)016Z(2)(3) 5.0 6
47 R 195D476(1)016R(2)(3) 7.1 6
68 R 195D686(1)016R(2)(3) 10.2 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 196 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
20 VDC AT + 85 °C, 13 VDC AT + 125 °C
0.47 A 195D474(1)020A(2)(3) 0.5 6
0.68 C 195D684(1)020C(2)(3) 0.5 4
1.0 B 195D105(1)020B(2)(3) 0.5 6
1.0 S 195D105(1)020S(2)(3) 0.5 4
1.5 S 195D155(1)020S(2)(3) 0.5 6
2.2 D 195D225(1)020D(2)(3) 0.5 6
2.2 S 195D225(1)020S(2)(3) 0.5 6
3.3 E 195D335(1)020E(2)(3) 0.7 6
3.3 V 195D335(1)020V(2)(3) 0.7 6
4.7 X 195D475(1)020X(2)(3) 0.9 6
6.8 F 195D685(1)020F(2)(3) 1.4 6
6.8 X 195D685(1)020X(2)(3) 1.4 6
10 Y 195D106(1)020Y(2)(3) 2.0 6
15 G 195D156(1)020G(2)(3) 3.0 6
15 Z 195D156(1)020Z(2)(3) 3.0 6
22 H 195D226(1)020H(2)(3) 4.4 6
22 Z 195D226(1)020Z(2)(3) 4.4 6
33 R 195D336(1)020R(2)(3) 6.6 6
47 R 195D476(1)020R(2)(3) 9.4 6
25 VDC AT + 85 °C, 17 VDC AT + 125 °C
0.33 A 195D334(1)025A(2)(3) 0.5 6
0.47 C 195D474(1)025C(2)(3) 0.5 4
0.68 B 195D684(1)025B(2)(3) 0.5 6
0.68 S 195D684(1)025S(2)(3) 0.5 4
1.0 S 195D105(1)025S(2)(3) 0.5 4
1.5 D 195D155(1)025D(2)(3) 0.5 6
1.5 S 195D155(1)025S(2)(3) 0.5 6
2.2 E 195D225(1)025E(2)(3) 0.6 6
2.2 V 195D225(1)025V(2)(3) 0.6 6
3.3 X 195D335(1)025X(2)(3) 0.8 6
4.7 F 195D475(1)025F(2)(3) 1.2 6
4.7 X 195D475(1)025X(2)(3) 1.2 6
6.8 G 195D685(1)025G(2)(3) 1.7 6
6.8 Y 195D685(1)025Y(2)(3) 1.7 6
10 G 195D106(1)025G(2)(3) 2.5 6
10 Y 195D106(1)025Y(2)(3) 2.5 6
15 H 195D156(1)025H(2)(3) 3.8 6
15 Z 195D156(1)025Z(2)(3) 3.8 6
22 R 195D226(1)025R(2)(3) 5.5 6
33 R 195D336(1)025R(2)(3) 8.3 6
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 197 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
35 VDC AT + 85 °C, 23 VDC AT + 125 °C
0.10 A 195D104(1)035A(2)(3) 0.5 6
0.15 A 195D154(1)035A(2)(3) 0.5 6
0.22 A 195D224(1)035A(2)(3) 0.5 6
0.33 B 195D334(1)035B(2)(3) 0.5 6
0.33 C 195D334(1)035C(2)(3) 0.5 4
0.47 B 195D474(1)035B(2)(3) 0.5 6
0.47 S 195D474(1)035S(2)(3) 0.5 4
0.68 D 195D684(1)035D(2)(3) 0.5 6
0.68 S 195D684(1)035S(2)(3) 0.5 4
1.0 D 195D105(1)035D(2)(3) 0.5 6
1.0 S 195D105(1)035S(2)(3) 0.5 4
1.5 E 195D155(1)035E(2)(3) 0.5 6
1.5 V 195D155(1)035V(2)(3) 0.5 6
2.2 F 195D225(1)035F(2)(3) 0.8 6
2.2 X 195D225(1)035X(2)(3) 0.8 6
3.3 F 195D335(1)035F(2)(3) 1.2 6
3.3 Y 195D335(1)035Y(2)(3) 1.2 6
4.7 G 195D475(1)035G(2)(3) 1.6 6
4.7 Z 195D475(1)035Z(2)(3) 1.6 6
6.8 H 195D685(1)035H(2)(3) 2.4 6
6.8 Z 195D685(1)035Z(2)(3) 2.4 6
10 Z 195D106(1)035Z(2)(3) 3.5 6
15 R 195D156(1)035R(2)(3) 5.3 6
22 R 195D226(1)035R(2)(3) 7.7 6
40 VDC AT + 85 °C, 23 VDC TO 25 VDC AT + 125 °C
0.10 A 195D104(1)040A(2)(3) 0.5 6
0.15 A 195D154(1)040A(2)(3) 0.5 6
0.22 A 195D224(1)040A(2)(3) 0.5 6
0.33 B 195D334(1)040B(2)(3) 0.5 6
0.47 B 195D474(1)040B(2)(3) 0.5 6
0.68 D 195D684(1)040D(2)(3) 0.5 6
1.0 D 195D105(1)040D(2)(3) 0.5 6
1.5 E 195D155(1)040E(2)(3) 0.5 6
2.2 F 195D225(1)040F(2)(3) 0.8 6
3.3 F 195D335(1)040F(2)(3) 1.2 6
4.7 G 195D475(1)040G(2)(3) 1.6 6
6.8 H 195D685(1)040H(2)(3) 2.4 6
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
0.10 A 195D104(1)050A(2)(3) 0.5 6
0.10 C 195D104(1)050C(2)(3) 0.5 4
0.15 A 195D154(1)050A(2)(3) 0.5 6
0.15 C 195D154(1)050C(2)(3) 0.5 4
0.22 B 195D224(1)050B(2)(3) 0.5 6
0.22 C 195D224(1)050C(2)(3) 0.5 4
0.22 S 195D224(1)050S(2)(3) 0.4 4
0.33 B 195D334(1)050B(2)(3) 0.5 6
0.33 S 195D334(1)050S(2)(3) 0.5 4
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 198 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
50 VDC AT + 85 °C, 33 VDC AT + 125 °C
0.47 D 195D474(1)050D(2)(3) 0.5 6
0.47 V 195D474(1)050V(2)(3) 0.5 4
0.68 D 195D684(1)050D(2)(3) 0.5 6
0.68 V 195D684(1)050V(2)(3) 0.5 4
1.0 E 195D105(1)050E(2)(3) 0.5 6
1.0 X 195D105(1)050X(2)(3) 0.5 4
1.5 F 195D155(1)050F(2)(3) 0.8 6
1.5 X 195D155(1)050X(2)(3) 0.8 6
2.2 F 195D225(1)050F(2)(3) 1.1 6
2.2 Y 195D225(1)050Y(2)(3) 1.1 6
3.3 G 195D335(1)050G(2)(3) 1.7 6
3.3 Z 195D335(1)050Z(2)(3) 1.7 6
4.7 H 195D475(1)050H(2)(3) 2.4 6
4.7 Z 195D475(1)050Z(2)(3) 2.4 6
6.8 R 195D685(1)050R(2)(3) 3.4 6
10 R 195D106(1)050R(2)(3) 5.0 6
RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below + 85 °C)
STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS
Capacitor Voltage Rating Operating Voltage
2.0 1.2
4.0 2.5
6.3 3.6
10 6
15/16 9
20 12
25 15
35 24
40 26
50 28
SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS
Capacitor Voltage Rating Operating Voltage
2.0 1.0
4.0 2.5
6.3 3.3
10 5.0
15/16 7.5
20 10
25 12
35 15
40 20
50 24
STANDARD RATINGS
CAPACITANCE
(μF) CASE CODE PART NUMBER
MAX. DCL
AT + 25 °C
(μA)
MAX. DF
AT + 25 °C
120 Hz (%)
Note
• Part number definitions:
(1) Tolerance: For 10 % tolerance, specify “X9”, for 20 % tolerance, change to “X0”
(2) Termination: For 100 % tin specify “2”, for gold plated specify “4”, for solder plated 60/40 specify “8”
(3) Packaging code: For 7" reels specify “T”, for 13" reels specify “W”
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 199 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
TYPICAL CURVES AT + 25 °C, IMPEDANCE AND ESR VS. FREQUENCY
100
10
1
0.1
Ω
FREQUENCY IN Hz
100M10M1M100K10K1K
“S” Case
4.7 μF - 10 VDC
1 μF - 35 VDC
IMPEDANCE
ESR
100
1000
10
1
0.1
Ω
FREQUENCY IN Hz
100M10M1M100K10K1K
“V” Case
15 μF - 4 VDC
0.47 μF - 50 VDC
IMPEDANCE
ESR
Ω
1000
100
10
1
0.01
0.1
FREQUENCY IN Hz
100 10M1M100K10K1K
“X” Case
10 μF - 16 VDC
6.8 μF - 20 VDC
IMPEDANCE
ESR
Ω
100
10
1
0.01
0.1
FREQUENCY IN Hz
100 10M1M100K10K1K
“Y” Case
47 μF - 6.3 VDC
22 μF - 10 VDC
IMPEDANCE
ESR
Ω
100
10
1
0.01
0.1
FREQUENCY IN Hz
100
10M1M100K10K1K
“Z” Case
100 μF - 6.3 V
DC
4.7 μF - 50 VDC
IMPEDANCE
ESR
195D
www.vishay.com Vishay Sprague
Revision: 11-Jan-12 200 Document Number: 40001
For technical questions, contact: tantalum@vishay.com
THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT
ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000
POWER DISSIPATION
CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 °C (W) IN FREE AIR
A0.040
B0.050
C0.030
D0.080
E0.090
F0.110
G0.120
H0.140
R0.250
S0.080
V0.095
X0.110
Y0.120
Z0.135
STANDARD PACKAGING QUANTITY
CASE CODE UNITS PER REEL
7" REEL 13" REEL
A2500n/a
B2000n/a
C 2500 10 000
D2000n/a
E2000n/a
F 700 n/a
G1400n/a
H 400 n/a
R 600 n/a
S 2500 10 000
V 2500 10 000
X 200 10 000
Y 1500 7500
Z 1500 5000
PRODUCT INFORMATION
Conformal Coated Guide www.vishay.com/doc?40150
Moisture Sensitivity www.vishay.com/doc?40135
SELECTOR GUIDES
Solid Tantalum Selector Guide www.vishay.com/doc?49053
Solid Tantalum Chip Capacitors www.vishay.com/doc?40091
FAQ
Frequently Asked Questions www.vishay.com/doc?40110
Legal Disclaimer Notice
www.vishay.com Vishay
Revision: 12-Mar-12 1Document Number: 91000
Disclaimer
ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE
RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.
Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,
“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other
disclosure relating to any product.
Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or
the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all
liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,
consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular
purpose, non-infringement and merchantability.
Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical
requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements
about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular
product with the properties described in the product specification is suitable for use in a particular application. Parameters
provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All
operating parameters, including typical parameters, must be validated for each customer application by the customer’s
technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,
including but not limited to the warranty expressed therein.
Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining
applications or for any other application in which the failure of the Vishay product could result in personal injury or death.
Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree
to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and
damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay
or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to
obtain written terms and conditions regarding products designed for such applications.
No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by
any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.
Material Category Policy
Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the
definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council
of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment
(EEE) - recast, unless otherwise specified as non-compliant.
Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that
all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.
